- 16 3月, 2015 2 次提交
-
-
由 Al Viro 提交于
[I would really like an ACK on that one from dhowells; it appears to be quite straightforward, but...] MSG_PEEK isn't passed to ->recvmsg() via msg->msg_flags; as the matter of fact, neither the kernel users of rxrpc, nor the syscalls ever set that bit in there. It gets passed via flags; in fact, another such check in the same function is done correctly - as flags & MSG_PEEK. It had been that way (effectively disabled) for 8 years, though, so the patch needs beating up - that case had never been tested. If it is correct, it's -stable fodder. Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Al Viro 提交于
It should be checking flags, not msg->msg_flags. It's ->sendmsg() instances that need to look for that in ->msg_flags, ->recvmsg() ones (including the other ->recvmsg() instance in that file, as well as unix_dgram_recvmsg() this one claims to be imitating) check in flags. Braino had been introduced in commit dcda13 ("caif: Bugfix - use MSG_TRUNC in receive") back in 2010, so it goes quite a while back. Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 15 3月, 2015 2 次提交
-
-
由 Venkat Venkatsubra 提交于
On adding an interface br_add_if() sets the MTU to the min of all the interfaces. Do the same thing on removing an interface too in br_del_if. Signed-off-by: NVenkat Venkatsubra <venkat.x.venkatsubra@oracle.com> Acked-by: NRoopa Prabhu <roopa@cumulusnetworks.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
Merge tag 'linux-can-fixes-for-4.0-20150314' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can Marc Kleine-Budde says: ==================== Hello David, this is a pull request for net/master, consisting of two patches: In the first patch Michal Simek enables the xilinx CAN driver for ARM64. The second patch by Ahmed S. Darwish fixes a race condition in the tx-queue of the kvaser_usb driver. ==================== Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 14 3月, 2015 6 次提交
-
-
由 Ahmed S. Darwish 提交于
A number of tx queue wake-up events went missing due to the outlined scenario below. Start state is a pool of 16 tx URBs, active tx_urbs count = 15, with the netdev tx queue open. CPU #1 [softirq] CPU #2 [softirq] start_xmit() tx_acknowledge() ................ ................ atomic_inc(&tx_urbs); if (atomic_read(&tx_urbs) >= 16) { --> atomic_dec(&tx_urbs); netif_wake_queue(); return; <-- netif_stop_queue(); } At the end, the correct state expected is a 15 tx_urbs count value with the tx queue state _open_. Due to the race, we get the same tx_urbs value but with the tx queue state _stopped_. The wake-up event is completely lost. Thus avoid hand-rolled concurrency mechanisms and use a proper lock for contexts and tx queue protection. Signed-off-by: NAhmed S. Darwish <ahmed.darwish@valeo.com> Cc: linux-stable <stable@vger.kernel.org> Signed-off-by: NMarc Kleine-Budde <mkl@pengutronix.de>
-
由 Michal Simek 提交于
Enable the xilinx driver for ARM64. Signed-off-by: NMichal Simek <michal.simek@xilinx.com> Acked-by: NSören Brinkmann <soren.brinkmann@xilinx.com> Signed-off-by: NMarc Kleine-Budde <mkl@pengutronix.de>
-
由 Eric Dumazet 提交于
inet_diag_dump_one_icsk() allocates too small skb. Add inet_sk_attr_size() helper right before inet_sk_diag_fill() so that it can be updated if/when new attributes are added. iproute2/ss currently does not use this dump_one() interface, this might explain nobody noticed this problem yet. Signed-off-by: NEric Dumazet <edumazet@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Fabio Estevam 提交于
This reverts commit 2b995f63. Панов Андрей reported the following regression: "Commit 2b995f63 in 4.0.0-rc3 introduces a nasty bug in transmit, corrupting packets. To reproduce: $ dd if=/dev/zero of=zeros bs=1M count=20 $ md5sum -b zeros 8f4e33f3dc3e414ff94e5fb6905cba8c *zeros This checksum is correct. Copy file "zeros" to another host with NFS, and it gets corrupted, checksum is changed. File should be big, small amounts of transmit isn't affected. I use an i.MX6 Quad board. If this commit is reverted, all works fine." Reported-by: NПанов Андрей <rockford@yandex.ru> Signed-off-by: NFabio Estevam <fabio.estevam@freescale.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Alexey Kodanev 提交于
commit dfd8645e wrongly assumes that VXLAN_VDI_MASK includes eight lower order reserved bits of VNI field that are using for remote checksum offload. Right now, when VNI number greater then 0xffff, vxlan_udp_encap_recv() will always return with 'bad_flag' error, reducing the usable vni range from 0..16777215 to 0..65535. Also, it doesn't really check whether RCO bits processed or not. Fix it by adding new VNI mask which has all 32 bits of VNI field: 24 bits for id and 8 bits for other usage. Signed-off-by: NAlexey Kodanev <alexey.kodanev@oracle.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Ameen Ali 提交于
Array index 'j' is used before limits check. Suggest put limit check before index use. Signed-off-by : <Ameenali023@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 13 3月, 2015 1 次提交
-
-
由 Jason Wang 提交于
We don't delete napi from hash list during module exit. This will cause the following panic when doing module load and unload: BUG: unable to handle kernel paging request at 0000004e00000075 IP: [<ffffffff816bd01b>] napi_hash_add+0x6b/0xf0 PGD 3c5d5067 PUD 0 Oops: 0000 [#1] SMP ... Call Trace: [<ffffffffa0a5bfb7>] init_vqs+0x107/0x490 [virtio_net] [<ffffffffa0a5c9f2>] virtnet_probe+0x562/0x791815639d880be [virtio_net] [<ffffffff8139e667>] virtio_dev_probe+0x137/0x200 [<ffffffff814c7f2a>] driver_probe_device+0x7a/0x250 [<ffffffff814c81d3>] __driver_attach+0x93/0xa0 [<ffffffff814c8140>] ? __device_attach+0x40/0x40 [<ffffffff814c6053>] bus_for_each_dev+0x63/0xa0 [<ffffffff814c7a79>] driver_attach+0x19/0x20 [<ffffffff814c76f0>] bus_add_driver+0x170/0x220 [<ffffffffa0a60000>] ? 0xffffffffa0a60000 [<ffffffff814c894f>] driver_register+0x5f/0xf0 [<ffffffff8139e41b>] register_virtio_driver+0x1b/0x30 [<ffffffffa0a60010>] virtio_net_driver_init+0x10/0x12 [virtio_net] This patch fixes this by doing this in virtnet_free_queues(). And also don't delete napi in virtnet_freeze() since it will call virtnet_free_queues() which has already did this. Fixes 91815639 ("virtio-net: rx busy polling support") Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: NJason Wang <jasowang@redhat.com> Acked-by: NMichael S. Tsirkin <mst@redhat.com> Reviewed-by: NMichael S. Tsirkin <mst@redhat.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 12 3月, 2015 8 次提交
-
-
由 Arnd Bergmann 提交于
The rds_iw_update_cm_id function stores a large 'struct rds_sock' object on the stack in order to pass a pair of addresses. This happens to just fit withint the 1024 byte stack size warning limit on x86, but just exceed that limit on ARM, which gives us this warning: net/rds/iw_rdma.c:200:1: warning: the frame size of 1056 bytes is larger than 1024 bytes [-Wframe-larger-than=] As the use of this large variable is basically bogus, we can rearrange the code to not do that. Instead of passing an rds socket into rds_iw_get_device, we now just pass the two addresses that we have available in rds_iw_update_cm_id, and we change rds_iw_get_mr accordingly, to create two address structures on the stack there. Signed-off-by: NArnd Bergmann <arnd@arndb.de> Acked-by: NSowmini Varadhan <sowmini.varadhan@oracle.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Willem de Bruijn 提交于
Test that sk != NULL before reading sk->sk_tsflags. Fixes: 49ca0d8b ("net-timestamp: no-payload option") Reported-by: NOne Thousand Gnomes <gnomes@lxorguk.ukuu.org.uk> Signed-off-by: NWillem de Bruijn <willemb@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Eric Dumazet 提交于
John reported that my previous commit added a regression on his router. This is because sender_cpu & napi_id share a common location, so get_xps_queue() can see garbage and perform an out of bound access. We need to make sure sender_cpu is cleared before doing the transmit, otherwise any NIC busy poll enabled (skb_mark_napi_id()) can trigger this bug. Signed-off-by: NEric Dumazet <edumazet@google.com> Reported-by: NJohn <jw@nuclearfallout.net> Bisected-by: NJohn <jw@nuclearfallout.net> Fixes: 2bd82484 ("xps: fix xps for stacked devices") Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David Vrabel 提交于
This fixes a performance regression introduced by 7fbb9d84 (xen-netback: release pending index before pushing Tx responses) Moving the notify outside of the spin locks means it can be delayed a long time (if the dealloc thread is descheduled or there is an interrupt or softirq). Signed-off-by: NDavid Vrabel <david.vrabel@citrix.com> Reviewed-by: NZoltan Kiss <zoltan.kiss@linaro.org> Acked-by: NWei Liu <wei.liu2@citrix.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Alexey Kodanev 提交于
sysctl has sysctl.net.core.rmem_*/wmem_* parameters which can be set to incorrect values. Given that 'struct sk_buff' allocates from rcvbuf, incorrectly set buffer length could result to memory allocation failures. For example, set them as follows: # sysctl net.core.rmem_default=64 net.core.wmem_default = 64 # sysctl net.core.wmem_default=64 net.core.wmem_default = 64 # ping localhost -s 1024 -i 0 > /dev/null This could result to the following failure: skbuff: skb_over_panic: text:ffffffff81628db4 len:-32 put:-32 head:ffff88003a1cc200 data:ffff88003a1cc200 tail:0xffffffe0 end:0xc0 dev:<NULL> kernel BUG at net/core/skbuff.c:102! invalid opcode: 0000 [#1] SMP ... task: ffff88003b7f5550 ti: ffff88003ae88000 task.ti: ffff88003ae88000 RIP: 0010:[<ffffffff8155fbd1>] [<ffffffff8155fbd1>] skb_put+0xa1/0xb0 RSP: 0018:ffff88003ae8bc68 EFLAGS: 00010296 RAX: 000000000000008d RBX: 00000000ffffffe0 RCX: 0000000000000000 RDX: ffff88003fdcf598 RSI: ffff88003fdcd9c8 RDI: ffff88003fdcd9c8 RBP: ffff88003ae8bc88 R08: 0000000000000001 R09: 0000000000000000 R10: 0000000000000001 R11: 00000000000002b2 R12: 0000000000000000 R13: 0000000000000000 R14: ffff88003d3f7300 R15: ffff88000012a900 FS: 00007fa0e2b4a840(0000) GS:ffff88003fc00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000d0f7e0 CR3: 000000003b8fb000 CR4: 00000000000006f0 Stack: ffff88003a1cc200 00000000ffffffe0 00000000000000c0 ffffffff818cab1d ffff88003ae8bd68 ffffffff81628db4 ffff88003ae8bd48 ffff88003b7f5550 ffff880031a09408 ffff88003b7f5550 ffff88000012aa48 ffff88000012ab00 Call Trace: [<ffffffff81628db4>] unix_stream_sendmsg+0x2c4/0x470 [<ffffffff81556f56>] sock_write_iter+0x146/0x160 [<ffffffff811d9612>] new_sync_write+0x92/0xd0 [<ffffffff811d9cd6>] vfs_write+0xd6/0x180 [<ffffffff811da499>] SyS_write+0x59/0xd0 [<ffffffff81651532>] system_call_fastpath+0x12/0x17 Code: 00 00 48 89 44 24 10 8b 87 c8 00 00 00 48 89 44 24 08 48 8b 87 d8 00 00 00 48 c7 c7 30 db 91 81 48 89 04 24 31 c0 e8 4f a8 0e 00 <0f> 0b eb fe 66 66 2e 0f 1f 84 00 00 00 00 00 55 48 89 e5 48 83 RIP [<ffffffff8155fbd1>] skb_put+0xa1/0xb0 RSP <ffff88003ae8bc68> Kernel panic - not syncing: Fatal exception Moreover, the possible minimum is 1, so we can get another kernel panic: ... BUG: unable to handle kernel paging request at ffff88013caee5c0 IP: [<ffffffff815604cf>] __alloc_skb+0x12f/0x1f0 ... Signed-off-by: NAlexey Kodanev <alexey.kodanev@oracle.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Neal Cardwell 提交于
Commit 814d488c ("tcp: fix the timid additive increase on stretch ACKs") fixed a bug where tcp_cong_avoid_ai() would either credit a connection with an increase of snd_cwnd_cnt, or increase snd_cwnd, but not both, resulting in cwnd increasing by 1 packet on at most every alternate invocation of tcp_cong_avoid_ai(). Although the commit correctly implemented the CUBIC algorithm, which can increase cwnd by as much as 1 packet per 1 packet ACKed (2x per RTT), in practice that could be too aggressive: in tests on network paths with small buffers, YouTube server retransmission rates nearly doubled. This commit restores CUBIC to a maximum cwnd growth rate of 1 packet per 2 packets ACKed (1.5x per RTT). In YouTube tests this restored retransmit rates to low levels. Testing: This patch has been tested in datacenter netperf transfers and live youtube.com and google.com servers. Fixes: 9cd981dc ("tcp: fix stretch ACK bugs in CUBIC") Signed-off-by: NNeal Cardwell <ncardwell@google.com> Signed-off-by: NYuchung Cheng <ycheng@google.com> Signed-off-by: NEric Dumazet <edumazet@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Neal Cardwell 提交于
The recent change to tcp_cong_avoid_ai() to handle stretch ACKs introduced a bug where snd_cwnd_cnt could accumulate a very large value while w was large, and then if w was reduced snd_cwnd could be incremented by a large delta, leading to a large burst and high packet loss. This was tickled when CUBIC's bictcp_update() sets "ca->cnt = 100 * cwnd". This bug crept in while preparing the upstream version of 814d488c. Testing: This patch has been tested in datacenter netperf transfers and live youtube.com and google.com servers. Fixes: 814d488c ("tcp: fix the timid additive increase on stretch ACKs") Signed-off-by: NNeal Cardwell <ncardwell@google.com> Signed-off-by: NYuchung Cheng <ycheng@google.com> Signed-off-by: NEric Dumazet <edumazet@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
Changed to my private email address. Signed-off-by: NChas Williams -- CONTRACTOR <chas@cmf.nrl.navy.mil> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 11 3月, 2015 5 次提交
-
-
由 David S. Miller 提交于
If rtnl_newlink() fails on it's call to dev_change_net_namespace(), we have to make use of the ->dellink() method, if present, just like we do when rtnl_configure_link() fails. Fixes: 317f4810 ("rtnl: allow to create device with IFLA_LINK_NETNSID set") Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Oliver Hartkopp 提交于
Signed-off-by: NOliver Hartkopp <socketcan@hartkopp.net> Acked-by: NAlexander Duyck <alexander.h.duyck@redhat.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
Merge tag 'wireless-drivers-for-davem-2015-03-10' of git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers iwlwifi: * fix ROC removal - avoids a firmware crash * fix throughput regression on iwldvm devices * fix panic in BT Coex * fixes in rate control * fixes in scan b43: * fix support for 5 GHz only BCM43228 model rtlwifi: * improve handling of IPv6 packets brcmfmac: * perform bound checking on vendor command buffer Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Hariprasad Shenai 提交于
Commit 16e47624 ("cxgb4: Add new scheme to update T4/T5 firmware") introduced below coccinelle warning. >> drivers/net/ethernet/chelsio/cxgb4/t4_hw.c:994:2-8: Replace memcpy with struct assignment Reported-by: NFengguang Wu <fengguang.wu@intel.com> Signed-off-by: NHariprasad Shenai <hariprasad@chelsio.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Nimrod Andy 提交于
The current driver support receive VLAN CTAG HW acceleration feature (NETIF_F_HW_VLAN_CTAG_RX) through software simulation. There calls the api .skb_copy_to_linear_data_offset() to skip the VLAN tag, but there have overlap between the two memory data point range. The patch just fix the issue. V2: Michael Grzeschik suggest to use memmove() instead of skb_copy_to_linear_data_offset(). Reported-by: NMichael Grzeschik <m.grzeschik@pengutronix.de> Fixes: 1b7bde6d ("net: fec: implement rx_copybreak to improve rx performance") Signed-off-by: NFugang Duan <B38611@freescale.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 10 3月, 2015 16 次提交
-
-
由 Yongbae Park 提交于
The interrupt is enabled before napi_complete(). A network timeout occurs if the interrupt handler is called before napi_complete(). Fix the bug by enabling the interrupt after napi_complete(). Signed-off-by: NYongbae Park <yongbae2@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Yongbae Park 提交于
The interrupt is enabled before napi_complete(). A network timeout occurs if the interrupt handler is called before napi_complete(). Fix the bug by enabling the interrupt after napi_complete(). Signed-off-by: NYongbae Park <yongbae2@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 WANG Cong 提交于
We dynamically allocate divisor+1 entries for ->ht[] in tc_u_hnode: ht = kzalloc(sizeof(*ht) + divisor*sizeof(void *), GFP_KERNEL); So ->ht is supposed to be the last field of this struct, however this is broken, since an rcu head is appended after it. Fixes: 1ce87720 ("net: sched: make cls_u32 lockless") Cc: Jamal Hadi Salim <jhs@mojatatu.com> Cc: John Fastabend <john.fastabend@gmail.com> Signed-off-by: NCong Wang <xiyou.wangcong@gmail.com> Acked-by: NEric Dumazet <edumazet@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
git://git.kernel.org/pub/scm/virt/kvm/kvm由 Linus Torvalds 提交于
Pull kvm/s390 bugfixes from Marcelo Tosatti. * git://git.kernel.org/pub/scm/virt/kvm/kvm: KVM: s390: non-LPAR case obsolete during facilities mask init KVM: s390: include guest facilities in kvm facility test KVM: s390: fix in memory copy of facility lists KVM: s390/cpacf: Fix kernel bug under z/VM KVM: s390/cpacf: Enable key wrapping by default
-
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux由 Linus Torvalds 提交于
Pull s390 fixes from Martin Schwidefsky: "One performance optimization for page_clear and a couple of bug fixes" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: s390/mm: fix incorrect ASCE after crst_table_downgrade s390/ftrace: fix crashes when switching tracers / add notrace to cpu_relax() s390/pci: unify pci_iomap symbol exports s390/pci: fix [un]map_resources sequence s390: let the compiler do page clearing s390/pci: fix possible information leak in mmio syscall s390/dcss: array index 'i' is used before limits check. s390/scm_block: fix off by one during cluster reservation s390/jump label: improve and fix sanity check s390/jump label: add missing jump_label_apply_nops() call
-
由 Linus Torvalds 提交于
Merge tag 'trace-fixes-v4.0-rc2-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace Pull seq-buf/ftrace fixes from Steven Rostedt: "This includes fixes for seq_buf_bprintf() truncation issue. It also contains fixes to ftrace when /proc/sys/kernel/ftrace_enabled and function tracing are started. Doing the following causes some issues: # echo 0 > /proc/sys/kernel/ftrace_enabled # echo function_graph > /sys/kernel/debug/tracing/current_tracer # echo 1 > /proc/sys/kernel/ftrace_enabled # echo nop > /sys/kernel/debug/tracing/current_tracer # echo function_graph > /sys/kernel/debug/tracing/current_tracer As well as with function tracing too. Pratyush Anand first reported this issue to me and supplied a patch. When I tested this on my x86 test box, it caused thousands of backtraces and warnings to appear in dmesg, which also caused a denial of service (a warning for every function that was listed). I applied Pratyush's patch but it did not fix the issue for me. I looked into it and found a slight problem with trampoline accounting. I fixed it and sent Pratyush a patch, but he said that it did not fix the issue for him. I later learned tha Pratyush was using an ARM64 server, and when I tested on my ARM board, I was able to reproduce the same issue as Pratyush. After applying his patch, it fixed the problem. The above test uncovered two different bugs, one in x86 and one in ARM and ARM64. As this looked like it would affect PowerPC, I tested it on my PPC64 box. It too broke, but neither the patch that fixed ARM or x86 fixed this box (the changes were all in generic code!). The above test, uncovered two more bugs that affected PowerPC. Again, the changes were only done to generic code. It's the way the arch code expected things to be done that was different between the archs. Some where more sensitive than others. The rest of this series fixes the PPC bugs as well" * tag 'trace-fixes-v4.0-rc2-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: ftrace: Fix ftrace enable ordering of sysctl ftrace_enabled ftrace: Fix en(dis)able graph caller when en(dis)abling record via sysctl ftrace: Clear REGS_EN and TRAMP_EN flags on disabling record via sysctl seq_buf: Fix seq_buf_bprintf() truncation seq_buf: Fix seq_buf_vprintf() truncation
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/net由 Linus Torvalds 提交于
Pull networking fixes from David Miller: 1) nft_compat accidently truncates ethernet protocol to 8-bits, from Arturo Borrero. 2) Memory leak in ip_vs_proc_conn(), from Julian Anastasov. 3) Don't allow the space required for nftables rules to exceed the maximum value representable in the dlen field. From Patrick McHardy. 4) bcm63xx_enet can accidently leave interrupts permanently disabled due to errors in the NAPI polling exit logic. Fix from Nicolas Schichan. 5) Fix OOPSes triggerable by the ping protocol module, due to missing address family validations etc. From Lorenzo Colitti. 6) Don't use RCU locking in sleepable context in team driver, from Jiri Pirko. 7) xen-netback miscalculates statistic offset pointers when reporting the stats to userspace. From David Vrabel. 8) Fix a leak of up to 256 pages per VIF destroy in xen-netaback, also from David Vrabel. 9) ip_check_defrag() cannot assume that skb_network_offset(), particularly when it is used by the AF_PACKET fanout defrag code. From Alexander Drozdov. 10) gianfar driver doesn't query OF node names properly when trying to determine the number of hw queues available. Fix it to explicitly check for OF nodes named queue-group. From Tobias Waldekranz. 11) MID field in macb driver should be 12 bits, not 16. From Punnaiah Choudary Kalluri. 12) Fix unintentional regression in traceroute due to timestamp socket option changes. Empty ICMP payloads should be allowed in non-timestamp cases. From Willem de Bruijn. 13) When devices are unregistered, we have to get rid of AF_PACKET multicast list entries that point to it via ifindex. Fix from Francesco Ruggeri. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (38 commits) tipc: fix bug in link failover handling net: delete stale packet_mclist entries net: macb: constify macb configuration data MAINTAINERS: add Marc Kleine-Budde as co maintainer for CAN networking layer MAINTAINERS: linux-can moved to github can: kvaser_usb: Read all messages in a bulk-in URB buffer can: kvaser_usb: Avoid double free on URB submission failures can: peak_usb: fix missing ctrlmode_ init for every dev can: add missing initialisations in CAN related skbuffs ip: fix error queue empty skb handling bgmac: Clean warning messages tcp: align tcp_xmit_size_goal() on tcp_tso_autosize() net: fec: fix unbalanced clk disable on driver unbind net: macb: Correct the MID field length value net: gianfar: correctly determine the number of queue groups ipv4: ip_check_defrag should not assume that skb_network_offset is zero net: bcmgenet: properly disable password matching net: eth: xgene: fix booting with devicetree bnx2x: Force fundamental reset for EEH recovery xen-netback: refactor xenvif_handle_frag_list() ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input由 Linus Torvalds 提交于
Pull input subsystem fixes from Dmitry Torokhov: "Miscellaneous driver fixes" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Input: psmouse - disable "palm detection" in the focaltech driver Input: psmouse - disable changing resolution/rate/scale for FocalTech Input: psmouse - ensure that focaltech reports consistent coordinates Input: psmouse - remove hardcoded touchpad size from the focaltech driver Input: tc3589x-keypad - set IRQF_ONESHOT flag to ensure IRQ request Input: ALPS - fix memory leak when detection fails Input: sun4i-ts - add thermal driver dependency Input: cyapa - remove superfluous type check in cyapa_gen5_read_idac_data() Input: cyapa - fix unaligned functions redefinition error Input: mma8450 - add parent device
-
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator由 Linus Torvalds 提交于
Pull regulator fixes from Mark Brown: "A couple of driver specific fixes plus a fix for a regression in the core where the updates to use sysfs group registration were overly enthusiastic in eliding properties and removed some that had been previously present" * tag 'regulator-v4.0-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator: regulator: Fix regression due to NULL constraints check regulator: rk808: Set the enable time for LDOs regulator: da9210: Mask all interrupt sources to deassert interrupt line
-
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi由 Linus Torvalds 提交于
Pull spi fixes from Mark Brown: "A collection of driver specific fixes to which the usual comments about them being important if you see them mostly apply (except for the comment fix). The pl022 one is particularly nasty for anyone affected by it" * tag 'spi-v4.0-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi: spi: pl022: Fix race in giveback() leading to driver lock-up spi: dw-mid: avoid potential NULL dereference spi: img-spfi: Verify max spfi transfer length spi: fix a typo in comment. spi: atmel: Fix interrupt setup for PDC transfers spi: dw: revisit FIFO size detection again spi: dw-pci: correct number of chip selects drivers: spi: ti-qspi: wait for busy bit clear before data write/read
-
git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security由 Linus Torvalds 提交于
Pull tpm fixes from James Morris: "fixes for the TPM driver" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security: tpm: fix call order in tpm-chip.c tpm/ibmvtpm: Additional LE support for tpm_ibmvtpm_send
-
git://git.kernel.org/pub/scm/linux/kernel/git/tomba/linux由 Linus Torvalds 提交于
Pull fbdev fixes from Tomi Valkeinen: - Fix regression in with omapdss when using i2c displays - Fix possible null deref in fbmon - Check kalloc return value in AMBA CLCD * tag 'fbdev-fixes-4.0' of git://git.kernel.org/pub/scm/linux/kernel/git/tomba/linux: OMAPDSS: fix regression with display sysfs files video: fbdev: fix possible null dereference video: ARM CLCD: Add missing error check for devm_kzalloc
-
git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup由 Linus Torvalds 提交于
Pull cgroup fixes from Tejun Heo: "The cgroup iteration update two years ago and the recent cpuset restructuring introduced regressions in subset of cpuset configurations. Three patches to fix them. All are marked for -stable" * 'for-4.0-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup: cpuset: Fix cpuset sched_relax_domain_level cpuset: fix a warning when clearing configured masks in old hierarchy cpuset: initialize effective masks when clone_children is enabled
-
git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata由 Linus Torvalds 提交于
Pull libata fixlet from Tejun Heo: "Speed limiting fix for sata_fsl" * 'for-4.0-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata: sata-fsl: Apply link speed limits
-
git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq由 Linus Torvalds 提交于
Pull workqueue fix from Tejun Heo: "One fix patch for a subtle livelock condition which can happen on PREEMPT_NONE kernels involving two racing cancel_work calls. Whoever comes in the second has to wait for the previous one to finish. This was implemented by making the later one block for the same condition that the former would be (work item completion) and then loop and retest; unfortunately, depending on the wake up order, the later one could lock out the former one to finish by busy looping on the cpu. This is fixed by implementing explicit wait mechanism. Work item might not belong anywhere at this point and there's remote possibility of thundering herd problem. I originally tried to use bit_waitqueue but it didn't work for static work items on modules. It's currently using single wait queue with filtering wake up function and exclusive wakeup. If this ever becomes a problem, which is not very likely, we can try to figure out a way to piggy back on bit_waitqueue" * 'for-4.0-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq: workqueue: fix hang involving racing cancel[_delayed]_work_sync()'s for PREEMPT_NONE
-
由 Jon Paul Maloy 提交于
In commit c637c103 ("tipc: resolve race problem at unicast message reception") we introduced a new mechanism for delivering buffers upwards from link to socket layer. That code contains a bug in how we handle the new link input queue during failover. When a link is reset, some of its users may be blocked because of congestion, and in order to resolve this, we add any pending wakeup pseudo messages to the link's input queue, and deliver them to the socket. This misses the case where the other, remaining link also may have congested users. Currently, the owner node's reference to the remaining link's input queue is unconditionally overwritten by the reset link's input queue. This has the effect that wakeup events from the remaining link may be unduely delayed (but not lost) for a potentially long period. We fix this by adding the pending events from the reset link to the input queue that is currently referenced by the node, whichever one it is. This commit should be applied to both net and net-next. Signed-off-by: NJon Maloy <jon.maloy@ericsson.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-