- 05 10月, 2015 1 次提交
-
-
由 Alexander Shishkin 提交于
A System Trace Module (STM) is a device exporting data in System Trace Protocol (STP) format as defined by MIPI STP standards. Examples of such devices are Intel(R) Trace Hub and Coresight STM. This abstraction provides a unified interface for software trace sources to send their data over an STM device to a debug host. In order to do that, such a trace source needs to be assigned a pair of master/channel identifiers that all the data from this source will be tagged with. The STP decoder on the debug host side will use these master/channel tags to distinguish different trace streams from one another inside one STP stream. This abstraction provides a configfs-based policy management mechanism for dynamic allocation of these master/channel pairs based on trace source-supplied string identifier. It has the flexibility of being defined at runtime and at the same time (provided that the policy definition is aligned with the decoding end) consistency. For userspace trace sources, this abstraction provides write()-based and mmap()-based (if the underlying stm device allows this) output mechanism. For kernel-side trace sources, we provide "stm_source" device class that can be connected to an stm device at run time. Cc: linux-api@vger.kernel.org Reviewed-by: NMathieu Poirier <mathieu.poirier@linaro.org> Signed-off-by: NAlexander Shishkin <alexander.shishkin@linux.intel.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
- 04 10月, 2015 5 次提交
-
-
由 Ashutosh Dixit 提交于
This patch updates the MIC host daemon to work with corresponding changes in COSM. Other MIC daemon fixes, cleanups and enhancements as are also rolled into this patch. Changes to MIC sysfs ABI which go into effect with this patch are also documented. Reviewed-by: NSudeep Dutt <sudeep.dutt@intel.com> Signed-off-by: NDasaratharaman Chandramouli <dasaratharaman.chandramouli@intel.com> Signed-off-by: NAshutosh Dixit <ashutosh.dixit@intel.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 ZhengShunQian 提交于
This patch add the bindings document of rockchip eFuse driver. Cc: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Cc: Heiko Stuebner <heiko@sntech.de> Signed-off-by: NZhengShunQian <zhengsq@rock-chips.com> Signed-off-by: NSrinivas Kandagatla <srinivas.kandagatla@linaro.org> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Stefan Wahren 提交于
This patch adds the devicetree bindings for the Freescale MXS On Chip OTP driver. Signed-off-by: NStefan Wahren <stefan.wahren@i2se.com> Signed-off-by: NSrinivas Kandagatla <srinivas.kandagatla@linaro.org> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Philipp Zabel 提交于
This patch documents the i.MX6 OCOTP device tree binding. Signed-off-by: NPhilipp Zabel <p.zabel@pengutronix.de> Signed-off-by: NSrinivas Kandagatla <srinivas.kandagatla@linaro.org> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Sanchayan Maity 提交于
Add the devicetree bindings for the Freescale Vybrid On-Chip OTP driver. Signed-off-by: NSanchayan Maity <maitysanchayan@gmail.com> Acked-by: NSrinivas Kandagatla <srinivas.kandagatla@linaro.org> Signed-off-by: NSrinivas Kandagatla <srinivas.kandagatla@linaro.org> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
- 25 9月, 2015 3 次提交
-
-
由 Lorenzo Pieralisi 提交于
The idle-states bindings mandate that the entry-method string in the idle-states node must be "psci" for ARM v8 64-bit systems, but the examples in the bindings report a wrong entry-method string. Owing to this typo, some dts in the kernel wrongly defined the entry-method property, since they likely cut and pasted the example definition without paying attention to the bindings definitions. This patch fixes the typo in the DT idle states bindings examples and respective dts in the kernel so that the bindings and related dts files are made compliant. Signed-off-by: NLorenzo Pieralisi <lorenzo.pieralisi@arm.com> Cc: Howard Chen <howard.chen@linaro.org> Cc: Rob Herring <robh+dt@kernel.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Heiko Stuebner <heiko@sntech.de> Signed-off-by: NRob Herring <robh@kernel.org>
-
由 Javier Martinez Canillas 提交于
The gpiolib supports parsing DT properties of the form <name>-gpio but it was only added for compatibility with older DT bindings that got it wrong and should not be used in newer bindings. The commit that added support for this was: dd34c37a ("gpio: of: Allow -gpio suffix for property names") but didn't update the documentation to explain this so it's been a source of confusion. So let's make this clear in the GPIO DT binding doc. Signed-off-by: NJavier Martinez Canillas <javier@osg.samsung.com> Signed-off-by: NRob Herring <robh@kernel.org>
-
由 Sergei Shtylyov 提交于
Add Renesas R8A7794 SoC support to the Renesas R-Car gen2 PCI driver. Signed-off-by: NSergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: NBjorn Helgaas <helgaas@kernel.org> Acked-by: NSimon Horman <horms+renesas@verge.net.au>
-
- 21 9月, 2015 1 次提交
-
-
由 Tomas Winkler 提交于
export me client protocol version to sysfs and uevent Signed-off-by: NTomas Winkler <tomas.winkler@intel.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
- 18 9月, 2015 7 次提交
-
-
由 Phil Sutter 提交于
Aside from some lingual cleanup, point out which interfaces are not or partly covered by this setting. Signed-off-by: NPhil Sutter <phil@nwl.cc> Acked-by: NCong Wang <cwang@twopensource.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David Ahern 提交于
Signed-off-by: NDavid Ahern <dsa@cumulusnetworks.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Hans de Goede 提交于
The bma180 / bma250 accelerometers share a driver (at least under Linux), so it makes sense to also have their bindings info in a single .txt. This commit extends the bma180 bindings with bma250 bindings, specifically it specifies how the 2 seperate interrupts the bma250 has must be listed in devicetree. The existing bma180 driver is already fully compatible with the specified bindings. Signed-off-by: NHans de Goede <hdegoede@redhat.com> Signed-off-by: NRob Herring <robh@kernel.org>
-
由 Punit Agrawal 提交于
The cooling-{min,max}-level properties are marked as optional in Documentation/devicetree/bindings/cpufreq/cpufreq-dt.txt and the usage in various device tree matches this, i.e., some cooling device in the device trees provide these properties while others do not. Make the bindings in Documentation/devicetree/bindings/thermal/thermal.txt consistent with the cpufreq-dt bindings by marking the cooling-*-level properties as optional. Signed-off-by: NPunit Agrawal <punit.agrawal@arm.com> Cc: Eduardo Valentin <edubezval@gmail.com> Cc: Rob Herring <robh+dt@kernel.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Ian Campbell <ijc+devicetree@hellion.org.uk> Cc: Kumar Gala <galak@codeaurora.org> Signed-off-by: NRob Herring <robh@kernel.org>
-
由 Punit Agrawal 提交于
The device trees in the kernel as well as the binding description in Documentation/devicetree/bindings/cpufreq/cpufreq-dt.txt use the cooling-{min,max}-level property. Fix the inconsistency with the binding description in Documentation/devicetree/bindings/thermal/thermal.txt by changing cooling-*-state properties to cooling-*-level. Signed-off-by: NPunit Agrawal <punit.agrawal@arm.com> Cc: Eduardo Valentin <edubezval@gmail.com> Cc: Rob Herring <robh+dt@kernel.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Ian Campbell <ijc+devicetree@hellion.org.uk> Cc: Kumar Gala <galak@codeaurora.org> Signed-off-by: NRob Herring <robh@kernel.org>
-
由 Mark Rutland 提交于
The GICv3 ITS uses sideband master identification data (known as a DeviceID) to identify which master wrote to a doorbell, and this data is used to determine how to react in response to the write. Commit 1e6db000 ("irqchip/gicv3-its: Add platform MSI support") added support per this binding, but failed to update the documentation. This patch fixes the documentation. Signed-off-by: NMark Rutland <mark.rutland@arm.com> Acked-by: NMarc Zyngier <marc.zyngier@arm.com> Cc: Rob Herring <robh+dt@kernel.org> Signed-off-by: NRob Herring <robh@kernel.org>
-
由 Masahiro Yamada 提交于
Signed-off-by: NMasahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: NRob Herring <robh@kernel.org>
-
- 15 9月, 2015 2 次提交
-
-
由 Nathan Sullivan 提交于
Document the binding for the zynq specific chipidea UDC binding. Signed-off-by: NNathan Sullivan <nathan.sullivan@ni.com> Signed-off-by: NPeter Chen <peter.chen@freescale.com>
-
由 Jonathan Corbet 提交于
Fix a few small mistakes in the static key documentation and delete an unneeded sentence. Suggested-by: NJason Baron <jbaron@akamai.com> Signed-off-by: NJonathan Corbet <corbet@lwn.net> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/20150914171105.511e1e21@lwn.netSigned-off-by: NIngo Molnar <mingo@kernel.org>
-
- 14 9月, 2015 4 次提交
-
-
由 Javi Merino 提交于
The power allocator governor currently requires that the thermal zone has at least two passive trip points. If there aren't, the governor refuses to bind to the thermal zone. This commit relaxes that requirement. Now the governor will bind to all thermal zones regardless of how many trip points they have. Cc: Zhang Rui <rui.zhang@intel.com> Cc: Eduardo Valentin <edubezval@gmail.com> Reviewed-by: NDaniel Kurtz <djkurtz@chromium.org> Signed-off-by: NJavi Merino <javi.merino@arm.com> Signed-off-by: NEduardo Valentin <edubezval@gmail.com>
-
由 Javier Martinez Canillas 提交于
The GPIO documentation mentions that GPIOs are mapped by defining a <function>-gpios property in the consumer device's node but a -gpio sufix is also supported after commit: dd34c37a ("gpio: of: Allow -gpio suffix for property names") Update the documentation to match the implementation. Signed-off-by: NJavier Martinez Canillas <javier@osg.samsung.com> Signed-off-by: NLinus Walleij <linus.walleij@linaro.org>
-
由 Dirk Behme 提交于
The con_id parameter has to match the GPIO description and is automatically extended by the GPIO suffix if not NULL. I had to look into the code to understand this and properly find the GPIO I've been looking for, so document this. Signed-off-by: NDirk Behme <dirk.behme@gmail.com> Acked-by: NAlexandre Courbot <acourbot@nvidia.com> Signed-off-by: NLinus Walleij <linus.walleij@linaro.org>
-
由 Dirk Behme 提交于
With commit 39b2bbe3 ("gpio: add flags argument to gpiod_get*() functions") the gpiod_get*() functions got a 'flags' parameter. Reflect this in the documentation, too. Signed-off-by: NDirk Behme <dirk.behme@gmail.com> Signed-off-by: NLinus Walleij <linus.walleij@linaro.org>
-
- 13 9月, 2015 1 次提交
-
-
由 Guenter Roeck 提交于
NCT6793D is register compatible with NCT6792D. Also move nct6775_sio_names[] closer to enum kinds to simplify adding new chips. Tested-by: NGrazvydas Ignotas <notasas@gmail.com> Reviewed-by: NJean Delvare <jdelvare@suse.de> Signed-off-by: NGuenter Roeck <linux@roeck-us.net>
-
- 11 9月, 2015 6 次提交
-
-
由 Chanwoo Choi 提交于
This patch updates the documentation to include the information of PPMUv2. The PPMUv2 is used for Exynos5433 and Exynos7420 to monitor the performance of each IP in Exynos SoC. Cc: MyungJoo Ham <myungjoo.ham@samsung.com> Cc: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: NChanwoo Choi <cw00.choi@samsung.com>
-
由 Javier Martinez Canillas 提交于
The exynos-ppmu driver is only a clock consumer and not a clock provider but its Device Tree binding listed #clock-cells as an optional property. Signed-off-by: NJavier Martinez Canillas <javier@osg.samsung.com> Reviewed-by: NChanwoo Choi <cw00.choi@samsung.com> Signed-off-by: NMyungJoo Ham <myungjoo.ham@samsung.com>
-
由 Vladimir Davydov 提交于
As noted by Minchan, a benefit of reading idle flag from /proc/kpageflags is that one can easily filter dirty and/or unevictable pages while estimating the size of unused memory. Note that idle flag read from /proc/kpageflags may be stale in case the page was accessed via a PTE, because it would be too costly to iterate over all page mappings on each /proc/kpageflags read to provide an up-to-date value. To make sure the flag is up-to-date one has to read /sys/kernel/mm/page_idle/bitmap first. Signed-off-by: NVladimir Davydov <vdavydov@parallels.com> Reviewed-by: NAndres Lagar-Cavilla <andreslc@google.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Raghavendra K T <raghavendra.kt@linux.vnet.ibm.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Michal Hocko <mhocko@suse.cz> Cc: Greg Thelen <gthelen@google.com> Cc: Michel Lespinasse <walken@google.com> Cc: David Rientjes <rientjes@google.com> Cc: Pavel Emelyanov <xemul@parallels.com> Cc: Cyrill Gorcunov <gorcunov@openvz.org> Cc: Jonathan Corbet <corbet@lwn.net> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Vladimir Davydov 提交于
Knowing the portion of memory that is not used by a certain application or memory cgroup (idle memory) can be useful for partitioning the system efficiently, e.g. by setting memory cgroup limits appropriately. Currently, the only means to estimate the amount of idle memory provided by the kernel is /proc/PID/{clear_refs,smaps}: the user can clear the access bit for all pages mapped to a particular process by writing 1 to clear_refs, wait for some time, and then count smaps:Referenced. However, this method has two serious shortcomings: - it does not count unmapped file pages - it affects the reclaimer logic To overcome these drawbacks, this patch introduces two new page flags, Idle and Young, and a new sysfs file, /sys/kernel/mm/page_idle/bitmap. A page's Idle flag can only be set from userspace by setting bit in /sys/kernel/mm/page_idle/bitmap at the offset corresponding to the page, and it is cleared whenever the page is accessed either through page tables (it is cleared in page_referenced() in this case) or using the read(2) system call (mark_page_accessed()). Thus by setting the Idle flag for pages of a particular workload, which can be found e.g. by reading /proc/PID/pagemap, waiting for some time to let the workload access its working set, and then reading the bitmap file, one can estimate the amount of pages that are not used by the workload. The Young page flag is used to avoid interference with the memory reclaimer. A page's Young flag is set whenever the Access bit of a page table entry pointing to the page is cleared by writing to the bitmap file. If page_referenced() is called on a Young page, it will add 1 to its return value, therefore concealing the fact that the Access bit was cleared. Note, since there is no room for extra page flags on 32 bit, this feature uses extended page flags when compiled on 32 bit. [akpm@linux-foundation.org: fix build] [akpm@linux-foundation.org: kpageidle requires an MMU] [akpm@linux-foundation.org: decouple from page-flags rework] Signed-off-by: NVladimir Davydov <vdavydov@parallels.com> Reviewed-by: NAndres Lagar-Cavilla <andreslc@google.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Raghavendra K T <raghavendra.kt@linux.vnet.ibm.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Michal Hocko <mhocko@suse.cz> Cc: Greg Thelen <gthelen@google.com> Cc: Michel Lespinasse <walken@google.com> Cc: David Rientjes <rientjes@google.com> Cc: Pavel Emelyanov <xemul@parallels.com> Cc: Cyrill Gorcunov <gorcunov@openvz.org> Cc: Jonathan Corbet <corbet@lwn.net> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Vladimir Davydov 提交于
/proc/kpagecgroup contains a 64-bit inode number of the memory cgroup each page is charged to, indexed by PFN. Having this information is useful for estimating a cgroup working set size. The file is present if CONFIG_PROC_PAGE_MONITOR && CONFIG_MEMCG. Signed-off-by: NVladimir Davydov <vdavydov@parallels.com> Reviewed-by: NAndres Lagar-Cavilla <andreslc@google.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Raghavendra K T <raghavendra.kt@linux.vnet.ibm.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Michal Hocko <mhocko@suse.cz> Cc: Greg Thelen <gthelen@google.com> Cc: Michel Lespinasse <walken@google.com> Cc: David Rientjes <rientjes@google.com> Cc: Pavel Emelyanov <xemul@parallels.com> Cc: Cyrill Gorcunov <gorcunov@openvz.org> Cc: Jonathan Corbet <corbet@lwn.net> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Dan Streetman 提交于
Change the Documentation/vm/zswap.txt doc to indicate that the "zpool" and "compressor" params are now changeable at runtime. Signed-off-by: NDan Streetman <ddstreet@ieee.org> Cc: Seth Jennings <sjennings@variantweb.net> Cc: Sergey Senozhatsky <sergey.senozhatsky.work@gmail.com> Cc: Vlastimil Babka <vbabka@suse.cz> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 10 9月, 2015 5 次提交
-
-
由 Andy Gross 提交于
This patch fixes SMEM addressing issues when remote processors need to use secure SMEM partitions. Signed-off-by: NAndy Gross <agross@codeaurora.org> Reviewed-by: NBjorn Andersson <bjorn.andersson@sonymobile.com>
-
由 Wenyou Yang 提交于
The compatible "atmel,sama5d4-wdt" supports the SAMA5D4 watchdog driver and the watchdog's WDT_MR register can be written more than once. Signed-off-by: NWenyou Yang <wenyou.yang@atmel.com> Reviewed-by: NGuenter Roeck <linux@roeck-us.net> Signed-off-by: NWim Van Sebroeck <wim@iguana.be>
-
由 Ariel D'Alessandro 提交于
Add the devicetree binding document for NXP LPC18xx Watchdog Timer. Signed-off-by: NAriel D'Alessandro <ariel@vanguardiasur.com.ar> Reviewed-by: NGuenter Roeck <linux@roeck-us.net> Signed-off-by: NWim Van Sebroeck <wim@iguana.be>
-
由 Alexandre Belloni 提交于
The watchdog has an input clock, the slow clock. It is required as it will not function without it. Signed-off-by: NAlexandre Belloni <alexandre.belloni@free-electrons.com> Reviewed-by: NGuenter Roeck <linux@roeck-us.net> Signed-off-by: NWim Van Sebroeck <wim@iguana.be>
-
由 Timur Tabi 提交于
The watchdog test program is much more useful if it can configure the timeout value and ping rate. This will allow you to test actual timeouts. Adds the -t parameter to set the timeout value (in seconds), and -p to set the ping rate (number of seconds between pings). Signed-off-by: NTimur Tabi <timur@codeaurora.org> Reviewed-by: NGuenter Roeck <linux@roeck-us.net> Signed-off-by: NWim Van Sebroeck <wim@iguana.be>
-
- 09 9月, 2015 5 次提交
-
-
由 Ariel D'Alessandro 提交于
Add the devicetree binding document for NXP LPC18xx PWM/SCT. Signed-off-by: NAriel D'Alessandro <ariel@vanguardiasur.com.ar> Signed-off-by: NThierry Reding <thierry.reding@gmail.com>
-
由 Sergey Senozhatsky 提交于
Compaction returns back to zram the number of migrated objects, which is quite uninformative -- we have objects of different sizes so user space cannot obtain any valuable data from that number. Change compaction to operate in terms of pages and return back to compaction issuer the number of pages that were freed during compaction. So from now on we will export more meaningful value in zram<id>/mm_stat -- the number of freed (compacted) pages. This requires: (a) a rename of `num_migrated' to 'pages_compacted' (b) a internal API change -- return first_page's fullness_group from putback_zspage(), so we know when putback_zspage() did free_zspage(). It helps us to account compaction stats correctly. Signed-off-by: NSergey Senozhatsky <sergey.senozhatsky@gmail.com> Acked-by: NMinchan Kim <minchan@kernel.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Yaowei Bai 提交于
The comment says that the per-cpu batchsize and zone watermarks are determined by present_pages which is definitely wrong, they are both calculated from managed_pages. Fix it. Signed-off-by: NYaowei Bai <bywxiaobai@163.com> Acked-by: NMichal Hocko <mhocko@suse.com> Cc: David Rientjes <rientjes@google.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Mike Kravetz 提交于
The URL for libhugetlbfs has changed. Also, put a stronger emphasis on using libgugetlbfs for hugetlb regression testing. Signed-off-by: NMike Kravetz <mike.kravetz@oracle.com> Acked-by: NNaoya Horiguchi <n-horiguchi@ah.jp.nec.com> Cc: Joern Engel <joern@logfs.org> Cc: Davidlohr Bueso <dave@stgolabs.net> Cc: David Rientjes <rientjes@google.com> Cc: Shuah Khan <shuahkh@osg.samsung.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Sean O. Stalley 提交于
Add a wrapper function for dma_pool_alloc() to get zeroed memory. Signed-off-by: NSean O. Stalley <sean.stalley@intel.com> Cc: Vinod Koul <vinod.koul@intel.com> Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: Gilles Muller <Gilles.Muller@lip6.fr> Cc: Nicolas Palix <nicolas.palix@imag.fr> Cc: Michal Marek <mmarek@suse.cz> Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Cc: Jonathan Corbet <corbet@lwn.net> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-