Since the classic device list now supports flags, convert the wakeable
list into a flag on the existing device list.
Signed-off-by: NAbhishek Pandit-Subedi <abhishekpandit@chromium.org>
Reviewed-by: NAlain Michaud <alainm@chromium.org>
Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>
Signed-off-by: NJohan Hedberg <johan.hedberg@intel.com>

In order to more easily add device flags to classic devices, create
a new type of bdaddr_list that supports setting flags.
Signed-off-by: NAbhishek Pandit-Subedi <abhishekpandit@chromium.org>
Reviewed-by: NAlain Michaud <alainm@chromium.org>
Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>
Signed-off-by: NJohan Hedberg <johan.hedberg@intel.com>

This adds the required read/set commands for runtime configuration. Even
while currently no parameters are specified, the commands are made
available.
Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>
Reviewed-by: NAlain Michaud <alainm@chromium.org>
Signed-off-by: NJohan Hedberg <johan.hedberg@intel.com>

This patch implements the read default system parameters and the set
default system parameters mgmt commands.
Signed-off-by: NAlain Michaud <alainm@chromium.org>
Reviewed-by: NAbhishek Pandit-Subedi <abhishekpandit@chromium.org>
Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>

This patch centralized the initialization of default parameters.  This
is required to allow clients to more easily customize the default
system parameters.
Signed-off-by: NAlain Michaud <alainm@chromium.org>
Reviewed-by: NAbhishek Pandit-Subedi <abhishekpandit@chromium.org>
Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>

This patch submits the corresponding kernel definitions to mgmt.h.
This is submitted before the implementation to avoid any conflicts in
values allocations.
Signed-off-by: NAlain Michaud <alainm@chromium.org>
Reviewed-by: NAbhishek Pandit-Subedi <abhishekpandit@chromium.org>
Reviewed-by: NYu Liu <yudiliu@google.com>
Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>

Tx pending flag is set to true when HOST IBS state is AWAKE or
AWAKEING. If IBS state is ASLEEP, then Tx clock is already voted
off. To optimize further directly calling serial_clock_vote()
instead of qca_wq_serial_tx_clock_vote_off(), at this point of
qca_suspend() already data is sent out. No need to wake up hci to
send data.
Signed-off-by: NBalakrishna Godavarthi <bgodavar@codeaurora.org>
Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>

In some version of WCN399x, SoC idle timeout is configured
as 80ms instead of 20ms or 40ms. To honor all the SoC's
supported in the driver increasing SoC idle timeout to 200ms.

Fixes: 41d5b25f ("Bluetooth: hci_qca: add PM support")
Signed-off-by: NBalakrishna Godavarthi <bgodavar@codeaurora.org>
Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>

By default, WCN3991 sent debug packets to HOST via ACL packet
with header 0xDC2E. This logging is not required on commercial
devices. With this patch SoC logging is disabled post fw
download.
Signed-off-by: NBalakrishna Godavarthi <bgodavar@codeaurora.org>
Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>

This change implements suggestions from the code review of the SCO CMSG
state flag patch.
Signed-off-by: NAlain Michaud <alainm@chromium.org>
Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>

This change adds support for reporting the BT_PKT_STATUS to the socket
CMSG data to allow the implementation of a packet loss correction on
erroneous data received on the SCO socket.

The patch was partially developed by Marcel Holtmann and validated by
Hsin-yu Chao.
Signed-off-by: NAlain Michaud <alainm@chromium.org>
Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>

Use device_init_wakeup to allow the Bluetooth dev to wake the system
from suspend. Currently, the device can wake the system but no
power/wakeup entry is created in sysfs to allow userspace to disable
wakeup.
Signed-off-by: NAbhishek Pandit-Subedi <abhishekpandit@chromium.org>
Reviewed-by: NDouglas Anderson <dianders@chromium.org>
Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>

Use the parent device's power/wakeup to control whether we support
remote wake. If remote wakeup is disabled, Bluetooth will not enable
scanning for incoming connections.
Signed-off-by: NAbhishek Pandit-Subedi <abhishekpandit@chromium.org>
Reviewed-by: NDouglas Anderson <dianders@chromium.org>
Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>

Set the correct parent dev when registering hdev. This allows userspace
tools to find the parent device (for example, to set the power/wakeup
property).

Before this change, the path was /sys/devices/virtual/bluetooth/hci0
and after this change, it looks more like:
/sys/bus/mmc/devices/mmc1:0001/mmc1:0001:2/bluetooth/hci0
Signed-off-by: NAbhishek Pandit-Subedi <abhishekpandit@chromium.org>
Reviewed-by: NDouglas Anderson <dianders@chromium.org>
Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>

This patch shall enable the Intel telemetry exception format
based on the supported features
Signed-off-by: NChethan T N <chethan.tumkur.narayan@intel.com>
Signed-off-by: NPs AyappadasX <AyappadasX.Ps@intel.com>
Signed-off-by: NKiran K <kiran.k@intel.com>
Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>

The command shall read the Intel controller supported
debug feature. Based on the supported features additional debug
configuration shall be enabled.
Signed-off-by: NChethan T N <chethan.tumkur.narayan@intel.com>
Signed-off-by: NPs AyappadasX <AyappadasX.Ps@intel.com>
Signed-off-by: NKiran K <kiran.k@intel.com>
Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>

Due to race conditions between qca_hw_error and qca_controller_memdump
during SSR timeout,the same pointer is freed twice. This results in a
double free. Now a lock is acquired before checking the stauts of SSR
state.

Fixes: d841502c ("Bluetooth: hci_qca: Collect controller memory dump during SSR")
Signed-off-by: NVenkata Lakshmi Narayana Gubba <gubbaven@codeaurora.org>
Reviewed-by: NAbhishek Pandit-Subedi <abhishekpandit@chromium.org>
Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>

It is preferable to allow suspend even when Bluetooth has problems
preparing for sleep. When Bluetooth fails to finish preparing for
suspend, log the error and allow the suspend notifier to continue
instead.

To also make it clearer why suspend failed, change bt_dev_dbg to
bt_dev_err when handling the suspend timeout.

Fixes: dd522a74 ("Bluetooth: Handle LE devices during suspend")
Reported-by: NLen Brown <len.brown@intel.com>
Signed-off-by: NAbhishek Pandit-Subedi <abhishekpandit@chromium.org>
Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>

If waiting for IBS sleep times out jump to the error handler, this is
easier to read than multiple 'if' branches and a fall through to the
error handler.
Signed-off-by: NMatthias Kaehlcke <mka@chromium.org>
Reviewed-by: NAbhishek Pandit-Subedi <abhishekpandit@chromium.org>
Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>

qca_suspend() calls serdev_device_wait_until_sent() regardless of
whether a transfer is pending. While it does no active harm since
the function should return immediately it makes the code more
confusing. Add a flag to track whether a transfer is pending and
only call serdev_device_wait_until_sent() is needed.
Signed-off-by: NMatthias Kaehlcke <mka@chromium.org>
Reviewed-by: NAbhishek Pandit-Subedi <abhishekpandit@chromium.org>
Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>

qca_suspend() removes the vote for the UART TX clock after
writing an IBS sleep request to the serial buffer. This is
not a good idea since there is no guarantee that the request
has been sent at this point. Instead remove the vote after
successfully entering IBS sleep. This also fixes the issue
of the vote being removed in case of an aborted suspend due
to a failure of entering IBS sleep.

Fixes: 41d5b25f ("Bluetooth: hci_qca: add PM support")
Signed-off-by: NMatthias Kaehlcke <mka@chromium.org>
Reviewed-by: NAbhishek Pandit-Subedi <abhishekpandit@chromium.org>
Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>

The serial clocks should be on when there is a vote for at least one
of the clocks (RX or TX), and off when there is no 'on' vote. The
current logic to determine the combined state is a bit redundant
in the code paths for different types of votes, use a single
statement in the common path instead.
Signed-off-by: NMatthias Kaehlcke <mka@chromium.org>
Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>

When a function like devm_clk_get_optional() function returns both error
pointers on error and NULL then the NULL return means that the optional
feature is deliberately disabled.  It is a special sort of success and
should not trigger an error message.  The surrounding code should be
written to check for NULL and not crash.

On the other hand, if we encounter an error, then the probe from should
clean up and return a failure.

In this code, if devm_clk_get_optional() returns an error pointer then
the kernel will crash inside the call to:

	clk_set_rate(qcadev->susclk, SUSCLK_RATE_32KHZ);

The error handling must be updated to prevent that.

Fixes: 77131dfe ("Bluetooth: hci_qca: Replace devm_gpiod_get() with devm_gpiod_get_optional()")
Signed-off-by: NDan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>

This patch removes a particularly noisy dbg message.  The debug message
isn't particularly interesting for debuggability so it was simply
removed to reduce noise in dbg logs.
Signed-off-by: NAlain Michaud <alainm@chromium.org>
Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>

Check current scan state by checking HCI_LE_SCAN flag and send scan
disable command only if scan is already enabled.
Signed-off-by: NManish Mandlik <mmandlik@google.com>
Reviewed-by: NAbhishek Pandit-Subedi <abhishekpandit@chromium.org>
Reviewed-by: NAlain Michaud <alainm@chromium.org>
Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>

Firmware for sd8997 chipset is distributed by Marvell package and also as
part of the linux-firmware repository in filename sdsd8997_combo_v4.bin.

This patch fixes mwifiex driver to load correct firmware file for sd8997.

Fixes: f0ef6748 ("Bluetooth: btmrvl: add sd8997 chipset support")
Signed-off-by: NPali Rohár <pali@kernel.org>
Acked-by: NGanapathi Bhat <ganapathi.bhat@nxp.com>
Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>

Firmware for sd8977 chipset is distributed by Marvell package and also as
part of the linux-firmware repository in filename sdsd8977_combo_v2.bin.

This patch fixes mwifiex driver to load correct firmware file for sd8977.

Fixes: 8c57983b ("Bluetooth: btmrvl: add support for sd8977 chipset")
Signed-off-by: NPali Rohár <pali@kernel.org>
Acked-by: NGanapathi Bhat <ganapathi.bhat@nxp.com>
Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>

Firmware for sd8997 chipset is distributed by Marvell package and also as
part of the linux-firmware repository in filename sdsd8997_combo_v4.bin.

This patch fixes mwifiex driver to load correct firmware file for sd8997.

Fixes: 6d85ef00 ("mwifiex: add support for 8997 chipset")
Signed-off-by: NPali Rohár <pali@kernel.org>
Acked-by: NGanapathi Bhat <ganapathi.bhat@nxp.com>
Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>

Firmware for sd8977 chipset is distributed by Marvell package and also as
part of the linux-firmware repository in filename sdsd8977_combo_v2.bin.

This patch fixes mwifiex driver to load correct firmware file for sd8977.

Fixes: 1a0f5478 ("mwifiex: add support for sd8977 chipset")
Signed-off-by: NPali Rohár <pali@kernel.org>
Acked-by: NGanapathi Bhat <ganapathi.bhat@nxp.com>
Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>

When running with conntrack rules, the dropped overlap fragments may cause
EPERM to be returned to sendto. Instead of completely failing, just ignore
those errors and continue. If this causes packets with overlap fragments to
be dropped as expected, that is okay. And if it causes packets that are
expected to be received to be dropped, which should not happen, it will be
detected as failure.
Signed-off-by: NThadeu Lima de Souza Cascardo <cascardo@canonical.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

found by smatch:
drivers/net/net_failover.c:65 net_failover_open() error:
 we previously assumed 'primary_dev' could be null (see line 43)

Fixes: cfc80d9a ("net: Introduce net_failover driver")
Signed-off-by: NVasily Averin <vvs@virtuozzo.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Tuong Lien says:

====================
tipc: revert two patches

We revert two patches:

tipc: Fix potential tipc_node refcnt leak in tipc_rcv
tipc: Fix potential tipc_aead refcnt leak in tipc_crypto_rcv

which prevented TIPC encryption from working properly and caused kernel
panic.
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This reverts commit 441870ee.

Like the previous patch in this series, we revert the above commit that
causes similar issues with the 'aead' object.
Acked-by: NJon Maloy <jmaloy@redhat.com>
Signed-off-by: NTuong Lien <tuong.t.lien@dektech.com.au>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This reverts commit de058420.

There is no actual tipc_node refcnt leak as stated in the above commit.
The refcnt is hold carefully for the case of an asynchronous decryption
(i.e. -EINPROGRESS/-EBUSY and skb = NULL is returned), so that the node
object cannot be freed in the meantime. The counter will be re-balanced
when the operation's callback arrives with the decrypted buffer if any.
In other cases, e.g. a synchronous crypto the counter will be decreased
immediately when it is done.

Now with that commit, a kernel panic will occur when there is no node
found (i.e. n = NULL) in the 'tipc_rcv()' or a premature release of the
node object.

This commit solves the issues by reverting the said commit, but keeping
one valid case that the 'skb_linearize()' is failed.
Acked-by: NJon Maloy <jmaloy@redhat.com>
Signed-off-by: NTuong Lien <tuong.t.lien@dektech.com.au>
Tested-by: NHoang Le <hoang.h.le@dektech.com.au>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

It makes sense to allow changes to get/set rx flow hash callback only
when rss is enabled. This patch restricts get_rss_hash_opts and
set_rss_hash_opts methods to allow querying and configuring different
Rx flow hash configurations only when rss is enabled
Signed-off-by: NRonak Doshi <doshir@vmware.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

add support to change TX/RX queue number with "ethtool -L combined".

V5 -> V6: remove check for carrier in hinic_xmit_frame
V4 -> V5: change time zone in patch header
V3 -> V4: update date in patch header
V2 -> V3: remove check for zero channels->combined_count
V1 -> V2: update commit message("ethtool -L" to "ethtool -L combined")
V0 -> V1: remove check for channels->tx_count/rx_count/other_count
Signed-off-by: NLuo bin <luobin9@huawei.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Daniel Borkmann says:

====================
pull-request: bpf-next 2020-06-02

The following pull-request contains BPF _fixes-only_ for your *net-next*
tree.

We've added 10 non-merge commits during the last 1 day(s) which contain
a total of 15 files changed, 229 insertions(+), 74 deletions(-).

The main changes are:

1) Several fixes to s390 BPF JIT e.g. fixing kernel panic when BPF stack is
   not 8-byte aligned, from Ilya Leoshkevich.

2) Fix bpf_skb_adjust_room() helper's CHECKSUM_UNNECESSARY handling which
   was wrongly bypassing TCP checksum verification, from Daniel Borkmann.

3) Fix tools/bpf/ build under MAKEFLAGS=rR which causes built-in CXX and
   others vars to be undefined, also from Ilya Leoshkevich.

4) Fix BPF ringbuf's selftest shared sample_cnt variable to avoid compiler
   optimizations on it, from Andrii Nakryiko.

5) Fix up test_verifier selftest due to addition of rx_queue_mapping to
   the bpf_sock structure, from Alexei Starovoitov.
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

When using make kselftest TARGETS=bpf, tools/bpf is built with
MAKEFLAGS=rR, which causes $(CXX) to be undefined, which in turn causes
the build to fail with

  CXX      test_cpp
/bin/sh: 2: g: not found

Fix by adding a default $(CXX) value, like tools/build/feature/Makefile
already does.
Signed-off-by: NIlya Leoshkevich <iii@linux.ibm.com>
Signed-off-by: NDaniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20200602175649.2501580-3-iii@linux.ibm.com

When using make kselftest TARGETS=bpf, tools/bpf is built with
MAKEFLAGS=rR, which causes $(COMPILE.c) to be undefined, which in turn
causes the build to fail with

  CC       kselftest/bpf/tools/build/bpftool/map_perf_ring.o
/bin/sh: 1: -MMD: not found

Fix by using $(CC) $(CFLAGS) -c instead of $(COMPILE.c).
Signed-off-by: NIlya Leoshkevich <iii@linux.ibm.com>
Signed-off-by: NDaniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20200602175649.2501580-2-iii@linux.ibm.com

Since commit 0ebeea8c ("bpf: Restrict bpf_probe_read{, str}() only to
archs where they work") 44 verifier tests fail on s390 due to not having
bpf_probe_read anymore. Fix by using bpf_probe_read_kernel.
Signed-off-by: NIlya Leoshkevich <iii@linux.ibm.com>
Signed-off-by: NDaniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20200602174448.2501214-1-iii@linux.ibm.com