Bluetooth: btmrvl: add support for sd8977 chipset

This patch adds support for 8977 chipset to mwifiex with SDIO
interface. Register offsets and supported feature flags are
updated. Firmware image used will be mrvl/sd8977_uapsta.bin.
Signed-off-by: NHemantkumar Suthar <shemant@marvell.com>
Signed-off-by: NRakesh Parmar <rakeshp@marvell.com>
Signed-off-by: NCathy Luo <cluo@marvell.com>
Signed-off-by: NGanapathi Bhat <gbhat@marvell.com>
Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>

drivers/bluetooth/Kconfig

@@ -336,7 +336,7 @@ config BT_MRVL
 	  The core driver to support Marvell Bluetooth devices.
 
 	  This driver is required if you want to support
-	  Marvell Bluetooth devices, such as 8688/8787/8797/8887/8897/8997.
+	  Marvell Bluetooth devices, such as 8688/8787/8797/8887/8897/8977/8997.
 
 	  Say Y here to compile Marvell Bluetooth driver
 	  into the kernel or say M to compile it as module.
@@ -350,7 +350,7 @@ config BT_MRVL_SDIO
 	  The driver for Marvell Bluetooth chipsets with SDIO interface.
 
 	  This driver is required if you want to use Marvell Bluetooth
-	  devices with SDIO interface. Currently SD8688/SD8787/SD8797/SD8887/SD8897/SD8997
+	  devices with SDIO interface. Currently SD8688/SD8787/SD8797/SD8887/SD8897/SD8977/SD8997
 	  chipsets are supported.
 
 	  Say Y here to compile support for Marvell BT-over-SDIO driver

drivers/bluetooth/btmrvl_sdio.c

@@ -212,6 +212,29 @@ static const struct btmrvl_sdio_card_reg btmrvl_reg_8897 = {
 	.fw_dump_end = 0xea,
 };
 
+static const struct btmrvl_sdio_card_reg btmrvl_reg_8977 = {
+	.cfg = 0x00,
+	.host_int_mask = 0x08,
+	.host_intstatus = 0x0c,
+	.card_status = 0x5c,
+	.sq_read_base_addr_a0 = 0xf8,
+	.sq_read_base_addr_a1 = 0xf9,
+	.card_revision = 0xc8,
+	.card_fw_status0 = 0xe8,
+	.card_fw_status1 = 0xe9,
+	.card_rx_len = 0xea,
+	.card_rx_unit = 0xeb,
+	.io_port_0 = 0xe4,
+	.io_port_1 = 0xe5,
+	.io_port_2 = 0xe6,
+	.int_read_to_clear = true,
+	.host_int_rsr = 0x04,
+	.card_misc_cfg = 0xD8,
+	.fw_dump_ctrl = 0xf0,
+	.fw_dump_start = 0xf1,
+	.fw_dump_end = 0xf8,
+};
+
 static const struct btmrvl_sdio_card_reg btmrvl_reg_8997 = {
 	.cfg = 0x00,
 	.host_int_mask = 0x08,
@@ -280,6 +303,15 @@ static const struct btmrvl_sdio_device btmrvl_sdio_sd8897 = {
 	.supports_fw_dump = true,
 };
 
+static const struct btmrvl_sdio_device btmrvl_sdio_sd8977 = {
+	.helper         = NULL,
+	.firmware       = "mrvl/sd8977_uapsta.bin",
+	.reg            = &btmrvl_reg_8977,
+	.support_pscan_win_report = true,
+	.sd_blksz_fw_dl = 256,
+	.supports_fw_dump = true,
+};
+
 static const struct btmrvl_sdio_device btmrvl_sdio_sd8997 = {
 	.helper         = NULL,
 	.firmware       = "mrvl/sd8997_uapsta.bin",
@@ -308,6 +340,9 @@ static const struct sdio_device_id btmrvl_sdio_ids[] = {
 	/* Marvell SD8897 Bluetooth device */
 	{ SDIO_DEVICE(SDIO_VENDOR_ID_MARVELL, 0x912E),
 			.driver_data = (unsigned long)&btmrvl_sdio_sd8897 },
+	/* Marvell SD8977 Bluetooth device */
+	{ SDIO_DEVICE(SDIO_VENDOR_ID_MARVELL, 0x9146),
+			.driver_data = (unsigned long)&btmrvl_sdio_sd8977 },
 	/* Marvell SD8997 Bluetooth device */
 	{ SDIO_DEVICE(SDIO_VENDOR_ID_MARVELL, 0x9142),
 			.driver_data = (unsigned long)&btmrvl_sdio_sd8997 },
@@ -1761,4 +1796,5 @@ MODULE_FIRMWARE("mrvl/sd8787_uapsta.bin");
 MODULE_FIRMWARE("mrvl/sd8797_uapsta.bin");
 MODULE_FIRMWARE("mrvl/sd8887_uapsta.bin");
 MODULE_FIRMWARE("mrvl/sd8897_uapsta.bin");
+MODULE_FIRMWARE("mrvl/sd8977_uapsta.bin");
 MODULE_FIRMWARE("mrvl/sd8997_uapsta.bin");