- 10 1月, 2017 4 次提交
-
-
由 Florian Westphal 提交于
Instead of: if (foo) { unlock(); return bar(); } unlock(); do: unlock(); if (foo) return bar(); This is ok because rcu protected structure is only dereferenced before the conditional. Signed-off-by: NFlorian Westphal <fw@strlen.de> Signed-off-by: NSteffen Klassert <steffen.klassert@secunet.com>
-
由 Florian Westphal 提交于
xfrm_init_tempstate is always called from within rcu read side section. We can thus use a simpler function that doesn't call rcu_read_lock again. While at it, also make xfrm_init_tempstate return value void, the return value was never tested. A followup patch will replace remaining callers of xfrm_state_get_afinfo with xfrm_state_afinfo_get_rcu variant and then remove the 'old' get_afinfo interface. Signed-off-by: NFlorian Westphal <fw@strlen.de> Signed-off-by: NSteffen Klassert <steffen.klassert@secunet.com>
-
由 Florian Westphal 提交于
commit 44abdc30 ("xfrm: replace rwlock on xfrm_state_afinfo with rcu") made xfrm_state_put_afinfo equivalent to rcu_read_unlock. Use spatch to replace it with direct calls to rcu_read_unlock: @@ struct xfrm_state_afinfo *a; @@ - xfrm_state_put_afinfo(a); + rcu_read_unlock(); old: text data bss dec hex filename 22570 72 424 23066 5a1a xfrm_state.o 1612 0 0 1612 64c xfrm_output.o new: 22554 72 424 23050 5a0a xfrm_state.o 1596 0 0 1596 63c xfrm_output.o Signed-off-by: NFlorian Westphal <fw@strlen.de> Signed-off-by: NSteffen Klassert <steffen.klassert@secunet.com>
-
由 Florian Westphal 提交于
xfrm/xfrm_state.c:1973:21: error: incompatible types in comparison expression (different address spaces) Harmless, but lets fix it to reduce the noise. While at it, get rid of unneeded NULL check, its never hit: net/ipv4/xfrm4_state.c: xfrm_state_register_afinfo(&xfrm4_state_afinfo); net/ipv6/xfrm6_state.c: return xfrm_state_register_afinfo(&xfrm6_state_afinfo); net/ipv6/xfrm6_state.c: xfrm_state_unregister_afinfo(&xfrm6_state_afinfo); ... are the only callsites. Signed-off-by: NFlorian Westphal <fw@strlen.de> Signed-off-by: NSteffen Klassert <steffen.klassert@secunet.com>
-
- 06 1月, 2017 1 次提交
-
-
由 Florian Westphal 提交于
Once flow cache gets removed the mtu initialisation happens for every skb that gets an xfrm attached, so this lock starts to show up in perf. It is not obvious why this lock is required -- the caller holds reference on the state struct, type->destructor is only called from the state gc worker (all state structs on gc list must have refcount 0). xfrm_init_state already has been called (else private data accessed by type->get_mtu() would not be set up). So just remove the lock -- the race on the state (DEAD?) doesn't matter (could change right after dropping the lock too). Signed-off-by: NFlorian Westphal <fw@strlen.de> Signed-off-by: NSteffen Klassert <steffen.klassert@secunet.com>
-
- 04 1月, 2017 1 次提交
-
-
由 Alexander Alemayhu 提交于
o s/descentant/descendant o s/workarbound/workaround Signed-off-by: NAlexander Alemayhu <alexander@alemayhu.com> Signed-off-by: NSteffen Klassert <steffen.klassert@secunet.com>
-
- 26 12月, 2016 1 次提交
-
-
由 Thomas Gleixner 提交于
ktime_set(S,N) was required for the timespec storage type and is still useful for situations where a Seconds and Nanoseconds part of a time value needs to be converted. For anything where the Seconds argument is 0, this is pointless and can be replaced with a simple assignment. Signed-off-by: NThomas Gleixner <tglx@linutronix.de> Cc: Peter Zijlstra <peterz@infradead.org>
-
- 25 12月, 2016 1 次提交
-
-
由 Linus Torvalds 提交于
This was entirely automated, using the script by Al: PATT='^[[:blank:]]*#[[:blank:]]*include[[:blank:]]*<asm/uaccess.h>' sed -i -e "s!$PATT!#include <linux/uaccess.h>!" \ $(git grep -l "$PATT"|grep -v ^include/linux/uaccess.h) to do the replacement at the end of the merge window. Requested-by: NAl Viro <viro@zeniv.linux.org.uk> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 30 11月, 2016 1 次提交
-
-
由 Yi Zhao 提交于
It doesn't support to run 32bit 'ip' to set xfrm objdect on 64bit host. But the return value is unknown for user program: ip xfrm policy list RTNETLINK answers: Unknown error 524 Replace ENOTSUPP with EOPNOTSUPP: ip xfrm policy list RTNETLINK answers: Operation not supported Signed-off-by: NYi Zhao <yi.zhao@windriver.com> Signed-off-by: NSteffen Klassert <steffen.klassert@secunet.com>
-
- 18 11月, 2016 1 次提交
-
-
由 Florian Westphal 提交于
if we succeed grabbing the refcount, then if (err && !xfrm_pol_hold_rcu) will evaluate to false so this hits last else branch which then sets policy to ERR_PTR(0). Fixes: ae33786f ("xfrm: policy: only use rcu in xfrm_sk_policy_lookup") Reported-by: NNicolas Dichtel <nicolas.dichtel@6wind.com> Tested-by: NNicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: NFlorian Westphal <fw@strlen.de> Signed-off-by: NSteffen Klassert <steffen.klassert@secunet.com>
-
- 10 11月, 2016 1 次提交
-
-
Install the callbacks via the state machine. Use multi state support to avoid custom list handling for the multiple instances. Signed-off-by: NSebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: NThomas Gleixner <tglx@linutronix.de> Cc: Steffen Klassert <steffen.klassert@secunet.com> Cc: Herbert Xu <herbert@gondor.apana.org.au> Cc: netdev@vger.kernel.org Cc: rt@linutronix.de Cc: "David S. Miller" <davem@davemloft.net> Link: http://lkml.kernel.org/r/20161103145021.28528-10-bigeasy@linutronix.deSigned-off-by: NThomas Gleixner <tglx@linutronix.de>
-
- 30 9月, 2016 2 次提交
-
-
由 Florian Westphal 提交于
Not used anymore since 2009 (9e0d57fd, 'xfrm: SAD entries do not expire correctly after suspend-resume'). Signed-off-by: NFlorian Westphal <fw@strlen.de> Signed-off-by: NSteffen Klassert <steffen.klassert@secunet.com>
-
由 Jia He 提交于
This is to use the generic interfaces snmp_get_cpu_field{,64}_batch to aggregate the data by going through all the items of each cpu sequentially. Signed-off-by: NJia He <hejianet@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 21 9月, 2016 1 次提交
-
-
由 Florian Westphal 提交于
This is called from the packet input path, we get lock contention if many cpus handle ipsec in parallel. After recent rcu conversion it is safe to call __xfrm_state_lookup without the spinlock. Signed-off-by: NFlorian Westphal <fw@strlen.de> Signed-off-by: NSteffen Klassert <steffen.klassert@secunet.com>
-
- 19 9月, 2016 1 次提交
-
-
由 Ilan Tayari 提交于
commit 1a6509d9 ("[IPSEC]: Add support for combined mode algorithms") introduced aead. The function attach_aead kmemdup()s the algorithm name during xfrm_state_construct(). However this memory is never freed. Implementation has since been slightly modified in commit ee5c2317 ("xfrm: Clone states properly on migration") without resolving this leak. This patch adds a kfree() call for the aead algorithm name. Fixes: 1a6509d9 ("[IPSEC]: Add support for combined mode algorithms") Signed-off-by: NIlan Tayari <ilant@mellanox.com> Acked-by: NRami Rosen <roszenrami@gmail.com> Signed-off-by: NSteffen Klassert <steffen.klassert@secunet.com>
-
- 11 9月, 2016 1 次提交
-
-
由 Javier Martinez Canillas 提交于
The IS_ENABLED() macro checks if a Kconfig symbol has been enabled either built-in or as a module, use that macro instead of open coding the same. Using the macro makes the code more readable by helping abstract away some of the Kconfig built-in and module enable details. Signed-off-by: NJavier Martinez Canillas <javier@osg.samsung.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 09 9月, 2016 1 次提交
-
-
由 Mathias Krause 提交于
When we fail to attach the security context in xfrm_state_construct() we'll return 0 as error value which, in turn, will wrongly claim success to userland when, in fact, we won't be adding / updating the XFRM state. This is a regression introduced by commit fd21150a ("[XFRM] netlink: Inline attach_encap_tmpl(), attach_sec_ctx(), and attach_one_addr()"). Fix it by propagating the error returned by security_xfrm_state_alloc() in this case. Fixes: fd21150a ("[XFRM] netlink: Inline attach_encap_tmpl()...") Signed-off-by: NMathias Krause <minipli@googlemail.com> Cc: Thomas Graf <tgraf@suug.ch> Signed-off-by: NSteffen Klassert <steffen.klassert@secunet.com>
-
- 08 9月, 2016 1 次提交
-
-
由 subashab@codeaurora.org 提交于
proc_dointvec limits the values to INT_MAX in u32 sysctl entries. proc_douintvec allows to write upto UINT_MAX. Signed-off-by: NSubash Abhinov Kasiviswanathan <subashab@codeaurora.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 24 8月, 2016 2 次提交
-
-
由 Florian Westphal 提交于
After commit 5b8ef341 ("xfrm: Remove ancient sleeping when the SA is in acquire state") gc does not need any per-netns data anymore. As far as gc is concerned all state structs are the same, so we can use a global work struct for it. Signed-off-by: NFlorian Westphal <fw@strlen.de> Signed-off-by: NSteffen Klassert <steffen.klassert@secunet.com>
-
由 Steffen Klassert 提交于
An earlier patch accidentally replaced a write_lock_bh with a spin_unlock_bh. Fix this by using spin_lock_bh instead. Fixes: 9d0380df ("xfrm: policy: convert policy_lock to spinlock") Signed-off-by: NSteffen Klassert <steffen.klassert@secunet.com>
-
- 12 8月, 2016 8 次提交
-
-
由 Florian Westphal 提交于
After earlier patches conversions all spots acquire the writer lock and we can now convert this to a normal spinlock. Signed-off-by: NFlorian Westphal <fw@strlen.de> Signed-off-by: NSteffen Klassert <steffen.klassert@secunet.com>
-
由 Florian Westphal 提交于
It doesn't seem that important. We now get inconsistent view of the counters, but those are stale anyway right after we drop the lock. Signed-off-by: NFlorian Westphal <fw@strlen.de> Signed-off-by: NSteffen Klassert <steffen.klassert@secunet.com>
-
由 Florian Westphal 提交于
Don't acquire the readlock anymore and rely on rcu alone. In case writer on other CPU changed policy at the wrong moment (after we obtained sk policy pointer but before we could obtain the reference) just repeat the lookup. Signed-off-by: NFlorian Westphal <fw@strlen.de> Signed-off-by: NSteffen Klassert <steffen.klassert@secunet.com>
-
由 Florian Westphal 提交于
side effect: no longer disables BH (should be fine). Signed-off-by: NFlorian Westphal <fw@strlen.de> Signed-off-by: NSteffen Klassert <steffen.klassert@secunet.com>
-
由 Florian Westphal 提交于
If we don't hold the policy lock anymore the refcnt might already be 0, i.e. policy struct is about to be free'd. Switch to atomic_inc_not_zero to avoid this. On removal policies are already unlinked from the tables (lists) before the last _put occurs so we are not supposed to find the same 'dead' entry on the next loop, so its safe to just repeat the lookup. Signed-off-by: NFlorian Westphal <fw@strlen.de> Signed-off-by: NSteffen Klassert <steffen.klassert@secunet.com>
-
由 Florian Westphal 提交于
Once xfrm_policy_lookup_bytype doesn't grab xfrm_policy_lock anymore its possible for a hash resize to occur in parallel. Use sequence counter to block lookup in case a resize is in progress and to also re-lookup in case hash table was altered in the mean time (might cause use to not find the best-match). Signed-off-by: NFlorian Westphal <fw@strlen.de> Signed-off-by: NSteffen Klassert <steffen.klassert@secunet.com>
-
由 Florian Westphal 提交于
Since commit 56f04730 ("xfrm: add rcu grace period in xfrm_policy_destroy()") xfrm policy objects are already free'd via rcu. In order to make more places lockless (i.e. use rcu_read_lock instead of grabbing read-side of policy rwlock) we only need to: - use rcu_assign_pointer to store address of new hash table backend memory - add rcu barrier so that freeing of old memory is delayed (expansion and free happens from system workqueue, so synchronize_rcu is fine) - use rcu_dereference to fetch current address of the hash table. Signed-off-by: NFlorian Westphal <fw@strlen.de> Signed-off-by: NSteffen Klassert <steffen.klassert@secunet.com>
-
由 Florian Westphal 提交于
This is required once we allow lockless readers. Signed-off-by: NFlorian Westphal <fw@strlen.de> Signed-off-by: NSteffen Klassert <steffen.klassert@secunet.com>
-
- 11 8月, 2016 1 次提交
-
-
由 Alexey Kodanev 提交于
Running LTP 'icmp-uni-basic.sh -6 -p ipcomp -m tunnel' test over openvswitch + veth can trigger kernel panic: BUG: unable to handle kernel NULL pointer dereference at 00000000000000e0 IP: [<ffffffff8169d1d2>] xfrm_input+0x82/0x750 ... [<ffffffff816d472e>] xfrm6_rcv_spi+0x1e/0x20 [<ffffffffa082c3c2>] xfrm6_tunnel_rcv+0x42/0x50 [xfrm6_tunnel] [<ffffffffa082727e>] tunnel6_rcv+0x3e/0x8c [tunnel6] [<ffffffff8169f365>] ip6_input_finish+0xd5/0x430 [<ffffffff8169fc53>] ip6_input+0x33/0x90 [<ffffffff8169f1d5>] ip6_rcv_finish+0xa5/0xb0 ... It seems that tunnel.ip6 can have garbage values and also dereferenced without a proper check, only tunnel.ip4 is being verified. Fix it by adding one more if block for AF_INET6 and initialize tunnel.ip6 with NULL inside xfrm6_rcv_spi() (which is similar to xfrm4_rcv_spi()). Fixes: 049f8e2e ("xfrm: Override skb->mark with tunnel->parm.i_key in xfrm_input") Signed-off-by: NAlexey Kodanev <alexey.kodanev@oracle.com> Signed-off-by: NSteffen Klassert <steffen.klassert@secunet.com>
-
- 10 8月, 2016 7 次提交
-
-
由 Florian Westphal 提交于
push the lock down, after earlier patches we can rely on rcu to make sure state struct won't go away. Signed-off-by: NFlorian Westphal <fw@strlen.de> Signed-off-by: NSteffen Klassert <steffen.klassert@secunet.com>
-
由 Florian Westphal 提交于
Before xfrm_state_find() can use rcu_read_lock instead of xfrm_state_lock we need to switch users of the hash table to assign/obtain the pointers with the appropriate rcu helpers. Signed-off-by: NFlorian Westphal <fw@strlen.de> Signed-off-by: NSteffen Klassert <steffen.klassert@secunet.com>
-
由 Florian Westphal 提交于
Once xfrm_state_find is lockless we have to cope with a concurrent resize opertion. We use a sequence counter to block in case a resize is in progress and to detect if we might have missed a state that got moved to a new hash table. Signed-off-by: NFlorian Westphal <fw@strlen.de> Signed-off-by: NSteffen Klassert <steffen.klassert@secunet.com>
-
由 Florian Westphal 提交于
The hash table backend memory and the state structs are free'd via kfree/vfree. Once we only rely on rcu during lookups we have to make sure no other cpu is currently accessing this before doing the free. Free operations already happen from worker so we can use synchronize_rcu to wait until concurrent readers are done. Signed-off-by: NFlorian Westphal <fw@strlen.de> Signed-off-by: NSteffen Klassert <steffen.klassert@secunet.com>
-
由 Florian Westphal 提交于
Once xfrm_state_lookup_byaddr no longer acquires the state lock another cpu might be freeing the state entry at the same time. To detect this we use atomic_inc_not_zero, we then signal -EAGAIN to caller in case our result was stale. Signed-off-by: NFlorian Westphal <fw@strlen.de> Signed-off-by: NSteffen Klassert <steffen.klassert@secunet.com>
-
由 Florian Westphal 提交于
This is required once we allow lockless access of bydst/bysrc hash tables. Signed-off-by: NFlorian Westphal <fw@strlen.de> Signed-off-by: NSteffen Klassert <steffen.klassert@secunet.com>
-
由 Julia Lawall 提交于
The xfrm_replay structures are never modified, so declare them as const. Done with the help of Coccinelle. Signed-off-by: NJulia Lawall <Julia.Lawall@lip6.fr> Signed-off-by: NSteffen Klassert <steffen.klassert@secunet.com>
-
- 29 7月, 2016 1 次提交
-
-
由 Tobias Brunner 提交于
Whenever thresholds are changed the hash tables are rebuilt. This is done by enumerating all policies and hashing and inserting them into the right table according to the thresholds and direction. Because socket policies are also contained in net->xfrm.policy_all but no hash tables are defined for their direction (dir + XFRM_POLICY_MAX) this causes a NULL or invalid pointer dereference after returning from policy_hash_bysel() if the rebuild is done while any socket policies are installed. Since the rebuild after changing thresholds is scheduled this crash could even occur if the userland sets thresholds seemingly before installing any socket policies. Fixes: 53c2e285 ("xfrm: Do not hash socket policies") Signed-off-by: NTobias Brunner <tobias@strongswan.org> Acked-by: NHerbert Xu <herbert@gondor.apana.org.au> Signed-off-by: NSteffen Klassert <steffen.klassert@secunet.com>
-
- 27 7月, 2016 2 次提交
-
-
由 Vegard Nossum 提交于
During fuzzing I regularly run into this WARN(). According to Herbert Xu, this "certainly shouldn't be a WARN, it probably shouldn't print anything either". Cc: Stephen Hemminger <stephen@networkplumber.org> Cc: Steffen Klassert <steffen.klassert@secunet.com> Cc: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: NVegard Nossum <vegard.nossum@oracle.com> Signed-off-by: NSteffen Klassert <steffen.klassert@secunet.com>
-
由 Vegard Nossum 提交于
AFAICT this message is just printed whenever input validation fails. This is a normal failure and we shouldn't be dumping the stack over it. Looks like it was originally a printk that was maybe incorrectly upgraded to a WARN: commit 62db5cfd Author: stephen hemminger <shemminger@vyatta.com> Date: Wed May 12 06:37:06 2010 +0000 xfrm: add severity to printk Cc: Stephen Hemminger <stephen@networkplumber.org> Cc: Steffen Klassert <steffen.klassert@secunet.com> Signed-off-by: NVegard Nossum <vegard.nossum@oracle.com> Signed-off-by: NSteffen Klassert <steffen.klassert@secunet.com>
-
- 18 7月, 2016 1 次提交
-
-
由 Vegard Nossum 提交于
If we hit any of the error conditions inside xfrm_dump_sa(), then xfrm_state_walk_init() never gets called. However, we still call xfrm_state_walk_done() from xfrm_dump_sa_done(), which will crash because the state walk was never initialized properly. We can fix this by setting cb->args[0] only after we've processed the first element and checking this before calling xfrm_state_walk_done(). Fixes: d3623099 ("ipsec: add support of limited SA dump") Cc: Nicolas Dichtel <nicolas.dichtel@6wind.com> Cc: Steffen Klassert <steffen.klassert@secunet.com> Signed-off-by: NVegard Nossum <vegard.nossum@oracle.com> Acked-by: NNicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: NSteffen Klassert <steffen.klassert@secunet.com>
-