When asked to blink LEDs the tg3 driver behaves when using:
	ethtool -p ethX
The default value for data is zero, and other drivers interpret this
as blink forever (or at least a really long time).  The tg3 driver
interprets this as blink once.  All drivers should have the same
behaviour.
Signed-off-by: NStephen Hemminger <shemminger@vyatta.com>
Acked-by: NMichael Chan <mchan@broadcom.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Signed-off-by: NMichael Chan <mchan@broadcom.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Because of some board issues, we need to disable parallel detect on
an HP blade.  Without this patch, the link state can become stuck
when it goes into parallel detect mode.
Signed-off-by: NMichael Chan <mchan@broadcom.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The previous patches to workaround the 5706S on an HP blade were not
sufficient.  The link state still does not change properly in some
cases.  This patch adds polling to make it completely reliable.
Signed-off-by: NMichael Chan <mchan@broadcom.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

We must pin all resources and make sure the PCI subsystem
won't relocate us, as the addresses are hardwired into hardware.
Signed-off-by: NMichael Buesch <mb@bu3sch.de>
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>

This silences sparse when run on zd1211rw.
Signed-off-by: NJohannes Berg <johannes@sipsolutions.net>
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>

This silences a few sparse warnings. There are two more where
I can't follow the code.
Signed-off-by: NJohannes Berg <johannes@sipsolutions.net>
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>

This fixes the pcicore driver to not die a horrible
crash death when inserting a cardbus card.
Signed-off-by: NMichael Buesch <mb@bu3sch.de>
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>

This fixes the GPIO API to be reentrancy safe.
Signed-off-by: NMichael Buesch <mb@bu3sch.de>
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>

This fixes the GPIO API to be usable.
Signed-off-by: NMichael Buesch <mb@bu3sch.de>
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>

This fixes the SSB watchdog access for devices without a chipcommon.
These devices have the watchdog on the extif.
Signed-off-by: NMichael Buesch <mb@bu3sch.de>
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>

This fixes the baud settings for new devices
like the Linksys WRT350n.
Signed-off-by: NMichael Buesch <mb@bu3sch.de>
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>

'u64' is not necessarily 'unsigned long long'

drivers/net/wireless/ath5k/base.c: In function 'ath5k_beacon_update_timers':
drivers/net/wireless/ath5k/base.c:2130: warning: format '%llx' expects type 'long long unsigned int', but argument 4 has type 'u64'
drivers/net/wireless/ath5k/base.c:2130: warning: format '%llx' expects type 'long long unsigned int', but argument 5 has type 'u64'
drivers/net/wireless/ath5k/base.c: In function 'ath5k_intr':
drivers/net/wireless/ath5k/base.c:2391: warning: format '%llx' expects type 'long long unsigned int', but argument 6 has type 'u64'
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>

sparse sees int -> bool cast as an error:
hw.c:3754:10: warning: cast truncates bits from constant value (ffffffea becomes 0)
Fix it by converting the rettype to int and check appropriately.
Signed-off-by: NJiri Slaby <jirislaby@gmail.com>
Cc: Nick Kossifidis <mickflemm@gmail.com>
Cc: Luis R. Rodriguez <mcgrof@gmail.com>
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>

Omitted lock causes sparse warning
drivers/net/wireless/ath5k/base.c:1682:1: warning: context imbalance in 'ath5k_tasklet_rx' - different lock contexts for basic block

Add the lock to the guilty fail path.
Signed-off-by: NJiri Slaby <jirislaby@gmail.com>
Acked-by: NNick Kossifidis <mickflemm@gmail.com>
Cc: Luis R. Rodriguez <mcgrof@gmail.com>
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>

Based on report from Cavan Carroll <cavancarroll@hotmail.com>:

	http://bugzilla.kernel.org/show_bug.cgi?id=9863

Cc: Cavan Carroll <cavancarroll@hotmail.com>
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>

Retarget of an old patch against prism54usb in linux-wireless archive:

	http://marc.info/?l=linux-wireless&m=117449935810254&w=2

Cc: Ivo Couckuyt <iv0co@yahoo.co.uk>
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>

release_net is missed on the error path in pneigh_lookup.
Signed-off-by: NDenis V. Lunev <den@openvz.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This counter is currently write-only.

Drawing an analogy with the similar tcp counter, I think
that this one should be pointed by the sockets_allocated
members of sctp_prot and sctpv6_prot.
Signed-off-by: NPavel Emelyanov <xemul@openvz.org>
Acked-by: NVlad Yasevich <vladislav.yasevich@hp.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

When deleting the veth driver, veth_close calls netif_carrier_off
for the two extremities of the network device. netif_carrier_off on
the peer device will fire an event and hold a reference on the peer
device. Just after, the peer is unregistered taking the rtnl_lock while
the linkwatch_event is scheduled. If __linkwatch_run_queue does not
occurs before the unregistering, unregister_netdevice will wait for
the dev refcount to reach zero holding the rtnl_lock and linkwatch_event
will wait for the rtnl_lock and hold the dev refcount.
Signed-off-by: NDaniel Lezcano <dlezcano@fr.ibm.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

From: Matheos Worku <Matheos.Worku@Sun.COM>

1) niu_enable_alt_mac() needs to be adjusted so that the mask
   is computed properly for the BMAC case.

2) BMAC has 6 alt MAC addresses available, not 7.
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

As reported by David Woodhouse <dwmw2@infradead.org>, using u_int32_t
in struct nf_inet_addr breaks the busybox build. Fix by using __u32.
Signed-off-by: NPatrick McHardy <kaber@trash.net>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The host address parts need to be converted to host-endian first
before arithmetic makes any sense on them.
Signed-off-by: NJan Engelhardt <jengelh@computergmbh.de>
Signed-off-by: NPatrick McHardy <kaber@trash.net>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

By allocating ->hinfo, we already have the needed indirection to cope
with the per-cpu xtables struct match_entry.

[Patrick: do this now before the revision 1 struct is used by userspace]
Signed-off-by: NJan Engelhardt <jengelh@computergmbh.de>
Signed-off-by: NPatrick McHardy <kaber@trash.net>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Since the header file xt_policy.h tests __KERNEL__, it should be
unifdef'ed before exporting to userspace.
Signed-off-by: NRobert P. J. Day <rpjday@crashcourse.ca>
Signed-off-by: NPatrick McHardy <kaber@trash.net>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

http://bugzilla.kernel.org/show_bug.cgi?id=9920
The function skb_make_writable returns true or false.
Signed-off-by: NJoonwoo Park <joonwpark81@gmail.com>
Signed-off-by: NPatrick McHardy <kaber@trash.net>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The int ret variable is used only to trigger the BUG_ON() after
the skb_copy_bits() call, so check the call failure directly
and drop the variable.
Signed-off-by: NPavel Emelyanov <xemul@openvz.org>
Signed-off-by: NPatrick McHardy <kaber@trash.net>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

As reported by Tomas Simonaitis <tomas.simonaitis@gmail.com>,
inserting new data in skbs queued over {ip,ip6,nfnetlink}_queue
triggers a SKB_LINEAR_ASSERT in skb_put().

Going back through the git history, it seems this bug is present since
at least 2.6.12-rc2, probably even since the removal of
skb_linearize() for netfilter.

Linearize non-linear skbs through skb_copy_expand() when enlarging
them.  Tested by Thomas, fixes bugzilla #9933.
Signed-off-by: NPatrick McHardy <kaber@trash.net>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Unless I miss a guaranteed relation between between "f" and
"new_fa->fa_info" this patch is required for fixing a NULL dereference
introduced by commit a6501e08 ("[IPV4]
FIB_HASH: Reduce memory needs and speedup lookups") and spotted by the
Coverity checker.

Eric Dumazet says:

	Hum, you are right, kmem_cache_free() doesnt allow a NULL
	object, like kfree() does.
Signed-off-by: NAdrian Bunk <bunk@kernel.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The Coverity checker spotted that less memory than required was
allocated.
Signed-off-by: NAdrian Bunk <bunk@kernel.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

IFLA_LINK is no longer a write-only attribute on the kernel side and
must thus be validated. Same goes for the newly introduced
IFLA_LINKINFO.

Fixes undefined behaviour if either of the attributes are not well
formed.
Signed-off-by: NThomas Graf <tgraf@suug.ch>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Commit a0a400d7 ("[NET]: dev_mcast:
add multicast list synchronization helpers") from you introduced a new
field "da_synced" to struct dev_addr_list that is not properly
initialized to 0. So when any of the current users (8021q, macvlan,
mac80211) calls dev_mc_sync/unsync they mess the address list for both
devices.

The attached patch fixed it for me and avoid future problems.
Signed-off-by: NJorge Boncompte [DTI2] <jorge@dti2.net>
Signed-off-by: NPatrick McHardy <kaber@trash.net>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Signed-off-by: NDavid S. Miller <davem@davemloft.net>

BMAC port alternate MAC address index needs to start at 1. Index 0 is
used for the main MAC address.
Signed-off-by: NMatheos Worku <matheos.worku@sun.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Add missing structure kernel-doc descriptions to sock.h & skbuff.h
to fix kernel-doc warnings.

(I think that Stephen H. sent a similar patch, but I can't find it.
I just want to kill the warnings, with either patch.)
Signed-off-by: NRandy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Signed-off-by: NPavel Emelyanov <xemul@openvz.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The result of the ip_route_output is not assigned to skb. This means that
- it is leaked
- possible OOPS below dereferrencing skb->dst
- no ICMP message for this case
Signed-off-by: NDenis V. Lunev <den@openvz.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

hci conn child devices other than rfcomm tty should not be moved here.
This is my lost, thanks for Barnaby's reporting and testing.

Signed-off-by: Dave Young <hidave.darkstar@gmail.com> 
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Move hci_dev_put to del_conn to avoid hci dev going away before hci conn.
Signed-off-by: NDave Young <hidave.darkstar@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Patrick McHardy notes that print_mac() can get invoked
even if the result it unused (f.e. as an argument to
pr_debug() when DEBUG is not defined).

Mark this function as "__pure" to eliminate this problem.
Signed-off-by: NDavid S. Miller <davem@davemloft.net>