Skip to content

K
Kernel

openeuler / Kernel
1 年多 前同步成功

通知 8
Star 0
Fork 0
K
Kernel
切换分支/标签
  1. 30 9月, 2015 1 次提交
  3. 25 9月, 2015 6 次提交
    • R
      phy: add phy_device_remove() · 38737e49
      由 Russell King 提交于 
      Add a phy_device_remove() function to complement phy_device_register(),
which undoes the effects of phy_device_register() by removing the phy
device from visibility, but not freeing it.

This allows these details to be moved out of the mdio bus code into
the phy code where this action belongs.
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      38737e49
    • R
      phy: fix mdiobus module safety · 3e3aaf64
      由 Russell King 提交于 
      Re-implement the mdiobus module refcounting to ensure that we actually
ensure that the mdiobus module code does not go away while we might call
into it.

The old scheme using bus->dev.driver was buggy, because bus->dev is a
class device which never has a struct device_driver associated with it,
and hence the associated code trying to obtain a refcount did nothing
useful.

Instead, take the approach that other subsystems do: pass the module
when calling mdiobus_register(), and record that in the mii_bus struct.
When we need to increment the module use count in the phy code, use
this stored pointer.  When the phy is deteched, drop the module
refcount, remembering that the phy device might go away at that point.

This doesn't stop the mii_bus going away while there are in-use phys -
it merely stops the underlying code vanishing.
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      3e3aaf64
    • J
      lwtunnel: remove source and destination UDP port config option · b194f30c
      由 Jiri Benc 提交于 
      The UDP tunnel config is asymmetric wrt. to the ports used. The source and
destination ports from one direction of the tunnel are not related to the
ports of the other direction. We need to be able to respond to ARP requests
using the correct ports without involving routing.

As the consequence, UDP ports need to be fixed property of the tunnel
interface and cannot be set per route. Remove the ability to set ports per
route. This is still okay to do, as no kernel has been released with these
attributes yet.

Note that the ability to specify source and destination ports is preserved
for other users of the lwtunnel API which don't use routes for tunnel key
specification (like openvswitch).

If in the future we rework ARP handling to allow port specification, the
attributes can be added back.
Signed-off-by: NJiri Benc <jbenc@redhat.com>
Acked-by: NThomas Graf <tgraf@suug.ch>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      b194f30c
    • J
      ipv4: send arp replies to the correct tunnel · 63d008a4
      由 Jiri Benc 提交于 
      When using ip lwtunnels, the additional data for xmit (basically, the actual
tunnel to use) are carried in ip_tunnel_info either in dst->lwtstate or in
metadata dst. When replying to ARP requests, we need to send the reply to
the same tunnel the request came from. This means we need to construct
proper metadata dst for ARP replies.

We could perform another route lookup to get a dst entry with the correct
lwtstate. However, this won't always ensure that the outgoing tunnel is the
same as the incoming one, and it won't work anyway for IPv4 duplicate
address detection.

The only thing to do is to "reverse" the ip_tunnel_info.
Signed-off-by: NJiri Benc <jbenc@redhat.com>
Acked-by: NThomas Graf <tgraf@suug.ch>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      63d008a4
    • P
      skbuff: Fix skb checksum flag on skb pull · 6ae459bd
      由 Pravin B Shelar 提交于 
      VXLAN device can receive skb with checksum partial. But the checksum
offset could be in outer header which is pulled on receive. This results
in negative checksum offset for the skb. Such skb can cause the assert
failure in skb_checksum_help(). Following patch fixes the bug by setting
checksum-none while pulling outer header.

Following is the kernel panic msg from old kernel hitting the bug.

------------[ cut here ]------------
kernel BUG at net/core/dev.c:1906!
RIP: 0010:[<ffffffff81518034>] skb_checksum_help+0x144/0x150
Call Trace:
<IRQ>
[<ffffffffa0164c28>] queue_userspace_packet+0x408/0x470 [openvswitch]
[<ffffffffa016614d>] ovs_dp_upcall+0x5d/0x60 [openvswitch]
[<ffffffffa0166236>] ovs_dp_process_packet_with_key+0xe6/0x100 [openvswitch]
[<ffffffffa016629b>] ovs_dp_process_received_packet+0x4b/0x80 [openvswitch]
[<ffffffffa016c51a>] ovs_vport_receive+0x2a/0x30 [openvswitch]
[<ffffffffa0171383>] vxlan_rcv+0x53/0x60 [openvswitch]
[<ffffffffa01734cb>] vxlan_udp_encap_recv+0x8b/0xf0 [openvswitch]
[<ffffffff8157addc>] udp_queue_rcv_skb+0x2dc/0x3b0
[<ffffffff8157b56f>] __udp4_lib_rcv+0x1cf/0x6c0
[<ffffffff8157ba7a>] udp_rcv+0x1a/0x20
[<ffffffff8154fdbd>] ip_local_deliver_finish+0xdd/0x280
[<ffffffff81550128>] ip_local_deliver+0x88/0x90
[<ffffffff8154fa7d>] ip_rcv_finish+0x10d/0x370
[<ffffffff81550365>] ip_rcv+0x235/0x300
[<ffffffff8151ba1d>] __netif_receive_skb+0x55d/0x620
[<ffffffff8151c360>] netif_receive_skb+0x80/0x90
[<ffffffff81459935>] virtnet_poll+0x555/0x6f0
[<ffffffff8151cd04>] net_rx_action+0x134/0x290
[<ffffffff810683d8>] __do_softirq+0xa8/0x210
[<ffffffff8162fe6c>] call_softirq+0x1c/0x30
[<ffffffff810161a5>] do_softirq+0x65/0xa0
[<ffffffff810687be>] irq_exit+0x8e/0xb0
[<ffffffff81630733>] do_IRQ+0x63/0xe0
[<ffffffff81625f2e>] common_interrupt+0x6e/0x6e
Reported-by: NAnupam Chanda <achanda@vmware.com>
Signed-off-by: NPravin B Shelar <pshelar@nicira.com>
Acked-by: NTom Herbert <tom@herbertland.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      6ae459bd
    • T
      cgroup, writeback: don't enable cgroup writeback on traditional hierarchies · 9badce00
      由 Tejun Heo 提交于 
      inode_cgwb_enabled() gates cgroup writeback support.  If it returns
true, each inode is attached to the corresponding memory domain which
gets mapped to io domain.  It currently only tests whether the
filesystem and bdi support cgroup writeback; however, cgroup writeback
support doesn't work on traditional hierarchies and thus it should
also test whether memcg and iocg are on the default hierarchy.

This caused traditional hierarchy setups to hit the cgroup writeback
path inadvertently and ended up creating separate writeback domains
for each memcg and mapping them all to the root iocg uncovering a
couple issues in the cgroup writeback path.

cgroup writeback was never meant to be enabled on traditional
hierarchies.  Make inode_cgwb_enabled() test whether both memcg and
iocg are on the default hierarchy.
Signed-off-by: NTejun Heo <tj@kernel.org>
Reported-by: NArtem Bityutskiy <dedekind1@gmail.com>
Reported-by: NDexuan Cui <decui@microsoft.com>
Link: http://lkml.kernel.org/g/1443012552.19983.209.camel@gmail.com
Link: http://lkml.kernel.org/g/f30d4a6aa8a546ff88f73021d026a453@SIXPR30MB031.064d.mgd.msft.net
      9badce00
  5. 24 9月, 2015 1 次提交
    • N
      netpoll: Close race condition between poll_one_napi and napi_disable · 2d8bff12
      由 Neil Horman 提交于 
      Drivers might call napi_disable while not holding the napi instance poll_lock.
In those instances, its possible for a race condition to exist between
poll_one_napi and napi_disable.  That is to say, poll_one_napi only tests the
NAPI_STATE_SCHED bit to see if there is work to do during a poll, and as such
the following may happen:

CPU0				CPU1
ndo_tx_timeout			napi_poll_dev
 napi_disable			 poll_one_napi
  test_and_set_bit (ret 0)
				  test_bit (ret 1)
   reset adapter		   napi_poll_routine

If the adapter gets a tx timeout without a napi instance scheduled, its possible
for the adapter to think it has exclusive access to the hardware  (as the napi
instance is now scheduled via the napi_disable call), while the netpoll code
thinks there is simply work to do.  The result is parallel hardware access
leading to corrupt data structures in the driver, and a crash.

Additionaly, there is another, more critical race between netpoll and
napi_disable.  The disabled napi state is actually identical to the scheduled
state for a given napi instance.  The implication being that, if a napi instance
is disabled, a netconsole instance would see the napi state of the device as
having been scheduled, and poll it, likely while the driver was dong something
requiring exclusive access.  In the case above, its fairly clear that not having
the rings in a state ready to be polled will cause any number of crashes.

The fix should be pretty easy.  netpoll uses its own bit to indicate that that
the napi instance is in a state of being serviced by netpoll (NAPI_STATE_NPSVC).
We can just gate disabling on that bit as well as the sched bit.  That should
prevent netpoll from conducting a napi poll if we convert its set bit to a
test_and_set_bit operation to provide mutual exclusion

Change notes:
V2)
	Remove a trailing whtiespace
	Resubmit with proper subject prefix

V3)
	Clean up spacing nits
Signed-off-by: NNeil Horman <nhorman@tuxdriver.com>
CC: "David S. Miller" <davem@davemloft.net>
CC: jmaxwell@redhat.com
Tested-by: jmaxwell@redhat.com
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      2d8bff12
  7. 23 9月, 2015 2 次提交
  9. 22 9月, 2015 1 次提交
    • E
      tcp/dccp: fix timewait races in timer handling · ed2e9239
      由 Eric Dumazet 提交于 
      When creating a timewait socket, we need to arm the timer before
allowing other cpus to find it. The signal allowing cpus to find
the socket is setting tw_refcnt to non zero value.

As we set tw_refcnt in __inet_twsk_hashdance(), we therefore need to
call inet_twsk_schedule() first.

This also means we need to remove tw_refcnt changes from
inet_twsk_schedule() and let the caller handle it.

Note that because we use mod_timer_pinned(), we have the guarantee
the timer wont expire before we set tw_refcnt as we run in BH context.

To make things more readable I introduced inet_twsk_reschedule() helper.

When rearming the timer, we can use mod_timer_pending() to make sure
we do not rearm a canceled timer.

Note: This bug can possibly trigger if packets of a flow can hit
multiple cpus. This does not normally happen, unless flow steering
is broken somehow. This explains this bug was spotted ~5 months after
its introduction.

A similar fix is needed for SYN_RECV sockets in reqsk_queue_hash_req(),
but will be provided in a separate patch for proper tracking.

Fixes: 789f558c ("tcp/dccp: get rid of central timewait timer")
Signed-off-by: NEric Dumazet <edumazet@google.com>
Reported-by: NYing Cai <ycai@google.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      ed2e9239
  11. 21 9月, 2015 3 次提交
    • N
      ip6tunnel: make rx/tx bytes counters consistent · 83cf9a25
      由 Nicolas Dichtel 提交于 
      Like the previous patch, which fixes ipv4 tunnels, here is the ipv6 part.

Before the patch, the external ipv6 header + gre header were included on
tx.

After the patch:
$ ping -c1 192.168.6.121 ; ip -s l ls dev ip6gre1
PING 192.168.6.121 (192.168.6.121) 56(84) bytes of data.
64 bytes from 192.168.6.121: icmp_req=1 ttl=64 time=1.92 ms

--- 192.168.6.121 ping statistics ---
1 packets transmitted, 1 received, 0% packet loss, time 0ms
rtt min/avg/max/mdev = 1.923/1.923/1.923/0.000 ms
7: ip6gre1@NONE: <POINTOPOINT,NOARP,UP,LOWER_UP> mtu 1440 qdisc noqueue state UNKNOWN mode DEFAULT group default
    link/gre6 20:01:06:60:30:08:c1:c3:00:00:00:00:00:00:01:23 peer 20:01:06:60:30:08:c1:c3:00:00:00:00:00:00:01:21
    RX: bytes  packets  errors  dropped overrun mcast
    84         1        0       0       0       0
    TX: bytes  packets  errors  dropped carrier collsns
    84         1        0       0       0       0
$ ping -c1 192.168.1.121 ; ip -s l ls dev ip6tnl1
PING 192.168.1.121 (192.168.1.121) 56(84) bytes of data.
64 bytes from 192.168.1.121: icmp_req=1 ttl=64 time=2.28 ms

--- 192.168.1.121 ping statistics ---
1 packets transmitted, 1 received, 0% packet loss, time 0ms
rtt min/avg/max/mdev = 2.288/2.288/2.288/0.000 ms
8: ip6tnl1@NONE: <POINTOPOINT,NOARP,UP,LOWER_UP> mtu 1452 qdisc noqueue state UNKNOWN mode DEFAULT group default
    link/tunnel6 2001:660:3008:c1c3::123 peer 2001:660:3008:c1c3::121
    RX: bytes  packets  errors  dropped overrun mcast
    84         1        0       0       0       0
    TX: bytes  packets  errors  dropped carrier collsns
    84         1        0       0       0       0
Signed-off-by: NNicolas Dichtel <nicolas.dichtel@6wind.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      83cf9a25
    • N
      net: Fix behaviour of unreachable, blackhole and prohibit routes · 0315e382
      由 Nikola Forró 提交于 
      Man page of ip-route(8) says following about route types:

  unreachable - these destinations are unreachable.  Packets are dis‐
  carded and the ICMP message host unreachable is generated.  The local
  senders get an EHOSTUNREACH error.

  blackhole - these destinations are unreachable.  Packets are dis‐
  carded silently.  The local senders get an EINVAL error.

  prohibit - these destinations are unreachable.  Packets are discarded
  and the ICMP message communication administratively prohibited is
  generated.  The local senders get an EACCES error.

In the inet6 address family, this was correct, except the local senders
got ENETUNREACH error instead of EHOSTUNREACH in case of unreachable route.
In the inet address family, all three route types generated ICMP message
net unreachable, and the local senders got ENETUNREACH error.

In both address families all three route types now behave consistently
with documentation.
Signed-off-by: NNikola Forró <nforro@redhat.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      0315e382
    • J
      security: fix typo in security_task_prctl · b7f76ea2
      由 Jann Horn 提交于 
      Signed-off-by: NJann Horn <jann@thejh.net>
Reviewed-by: NAndy Lutomirski <luto@kernel.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      b7f76ea2
  13. 19 9月, 2015 1 次提交
  15. 18 9月, 2015 6 次提交
  17. 17 9月, 2015 2 次提交
    • M
      arm/arm64: KVM: Remove 'config KVM_ARM_MAX_VCPUS' · ef748917
      由 Ming Lei 提交于 
      This patch removes config option of KVM_ARM_MAX_VCPUS,
and like other ARCHs, just choose the maximum allowed
value from hardware, and follows the reasons:

1) from distribution view, the option has to be
defined as the max allowed value because it need to
meet all kinds of virtulization applications and
need to support most of SoCs;

2) using a bigger value doesn't introduce extra memory
consumption, and the help text in Kconfig isn't accurate
because kvm_vpu structure isn't allocated until request
of creating VCPU is sent from QEMU;

3) the main effect is that the field of vcpus[] in 'struct kvm'
becomes a bit bigger(sizeof(void *) per vcpu) and need more cache
lines to hold the structure, but 'struct kvm' is one generic struct,
and it has worked well on other ARCHs already in this way. Also,
the world switch frequecy is often low, for example, it is ~2000
when running kernel building load in VM from APM xgene KVM host,
so the effect is very small, and the difference can't be observed
in my test at all.

Cc: Dann Frazier <dann.frazier@canonical.com>
Signed-off-by: NMing Lei <ming.lei@canonical.com>
Reviewed-by: NChristoffer Dall <christoffer.dall@linaro.org>
Signed-off-by: NMarc Zyngier <marc.zyngier@arm.com>
      ef748917
    • G
      spi: fix kernel-doc warnings in spi.h · 0243ed44
      由 Geliang Tang 提交于 
      Fix the following 'make htmldocs' warnings:

  .//include/linux/spi/spi.h:71: warning: No description found for parameter 'lock'
  .//include/linux/spi/spi.h:71: warning: Excess struct/union/enum/typedef member 'clock' description in 'spi_statistics'
Signed-off-by: NGeliang Tang <geliangtang@163.com>
Signed-off-by: NMark Brown <broonie@kernel.org>
      0243ed44
  19. 16 9月, 2015 14 次提交
  21. 15 9月, 2015 3 次提交