HiSilicon SEC engine supports PCI SRIOV. This patch enable this feature.
User can enable VFs and pass through them to VM, same SEC driver can work
in VM to provide skcipher algorithms.
Signed-off-by: NZaibo Xu <xuzaibo@huawei.com>
Signed-off-by: NLongfang Liu <liulongfang@huawei.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

SEC driver provides PCIe hardware device initiation with
AES, SM4, and 3DES skcipher algorithms registered to Crypto.
It uses Hisilicon QM as interface to CPU.
Signed-off-by: NZaibo Xu <xuzaibo@huawei.com>
Signed-off-by: NLongfang Liu <liulongfang@huawei.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

If CRYPTO_DEV_ATMEL_AUTHENC is m, CRYPTO_DEV_ATMEL_SHA is m,
but CRYPTO_DEV_ATMEL_AES is y, building will fail:

drivers/crypto/atmel-aes.o: In function `atmel_aes_authenc_init_tfm':
atmel-aes.c:(.text+0x670): undefined reference to `atmel_sha_authenc_get_reqsize'
atmel-aes.c:(.text+0x67a): undefined reference to `atmel_sha_authenc_spawn'
drivers/crypto/atmel-aes.o: In function `atmel_aes_authenc_setkey':
atmel-aes.c:(.text+0x7e5): undefined reference to `atmel_sha_authenc_setkey'

Make CRYPTO_DEV_ATMEL_AUTHENC depend on CRYPTO_DEV_ATMEL_AES,
and select CRYPTO_DEV_ATMEL_SHA and CRYPTO_AUTHENC for it under there.
Reported-by: NHulk Robot <hulkci@huawei.com>
Suggested-by: NHerbert Xu <herbert@gondor.apana.org.au>
Fixes: 89a82ef8 ("crypto: atmel-authenc - add support to...")
Signed-off-by: NYueHaibing <yuehaibing@huawei.com>
Reviewed-by: NTudor Ambarus <tudor.ambarus@microchip.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

dma_request_slave_channel_reason() is:
#define dma_request_slave_channel_reason(dev, name) \
	dma_request_chan(dev, name)
Signed-off-by: NPeter Ujfalusi <peter.ujfalusi@ti.com>
Reviewed-by: NVinod Koul <vkoul@kernel.org>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

Currently, there is no privilege separation of the SEV command; you can
run them all or none of them. This is less than ideal because it means
that a compromise of the code which launches VMs could make permanent
change to the SEV certifcate chain which will affect others.

These commands are required to attest the VM environment:
 - SEV_PDH_CERT_EXPORT
 - SEV_PLATFORM_STATUS
 - SEV_GET_{ID,ID2}

These commands manage the SEV certificate chain:
 - SEV_PEK_CERR_IMPORT
 - SEV_FACTORY_RESET
 - SEV_PEK_GEN
 - SEV_PEK_CSR
 - SEV_PDH_GEN

Lets add the CAP_SYS_ADMIN check for the group of the commands which alters
the SEV certificate chain to provide some level of privilege separation.

Cc: Herbert Xu <herbert@gondor.apana.org.au>
Cc: Gary Hook <gary.hook@amd.com>
Cc: Erdem Aktas <erdemaktas@google.com>
Cc: Tom Lendacky <Thomas.Lendacky@amd.com>
Tested-by: NDavid Rientjes <rientjes@google.com>
Co-developed-by: NDavid Rientjes <rientjes@google.com>
Signed-off-by: NDavid Rientjes <rientjes@google.com>
Signed-off-by: NBrijesh Singh <brijesh.singh@amd.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

The TFM context can be renamed to a more appropriate name and the local
varaibles as well, using 'tctx' which seems to be more common than
'mctx'.

The _setkey callback was the last one without the blake2b_ prefix,
rename that too.
Signed-off-by: NDavid Sterba <dsterba@suse.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

Now that there's only one call to blake2b_update, we can merge it to the
callback and simplify. The empty input check is split and the rest of
code un-indented.
Signed-off-by: NDavid Sterba <dsterba@suse.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

The helper is trival and called once, inlining makes things simpler.
There's a comment to tie it back to the idea behind the code.
Signed-off-by: NDavid Sterba <dsterba@suse.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

All the code for param block has been inlined, last_node and outlen from
the state are not used or have become redundant due to other code.
Remove it.
Signed-off-by: NDavid Sterba <dsterba@suse.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

The keyed init writes the key bytes to the input buffer and does an
update. We can do that in two ways: fill the buffer and update
immediatelly. This is what current blake2b_init_key does. Any other
following _update or _final will continue from the updated state.

The other way is to write the key and set the number of bytes to process
at the next _update or _final, lazy evaluation. Which leads to the the
simplified code in this patch.
Signed-off-by: NDavid Sterba <dsterba@suse.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

The call chain from blake2b_init can be simplified because the param
block is effectively zeros, besides the key.

- blake2b_init0 zeroes state and sets IV
- blake2b_init sets up param block with defaults (key and some 1s)
- init with key, write it to the input buffer and recalculate state

So the compact way is to zero out the state and initialize index 0 of
the state directly with the non-zero values and the key.
Signed-off-by: NDavid Sterba <dsterba@suse.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

blake2b_final is called only once, merge it to the crypto API callback
and simplify. This avoids the temporary buffer and swaps the bytes of
internal buffer.
Signed-off-by: NDavid Sterba <dsterba@suse.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

Use kmemdup rather than duplicating its implementation
Signed-off-by: NYueHaibing <yuehaibing@huawei.com>
Acked-by: NCorentin Labbe <clabbe.montjoie@gmail.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

If you try to compile this driver on a 64-bit platform then you
will get warnings because it mixes size_t with unsigned int which
only works on 32-bit.

This patch fixes all of the warnings.
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
Acked-by: NCorentin Labbe <clabbe.montjoie@gmail.com>
Tested-by: NCorentin Labbe <clabbe.montjoie@gmail.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

The ccree driver does not use the ablkcipher interface but contains
a rudimentary reference to it in the naming of an unrelated macro.
Let's rename it to avoid confusion.
Acked-by: NGilad Ben-Yossef <gilad@benyossef.com>
Signed-off-by: NArd Biesheuvel <ardb@kernel.org>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

Now that all users of the deprecated ablkcipher interface have been
moved to the skcipher interface, ablkcipher is no longer used and
can be removed.
Reviewed-by: NEric Biggers <ebiggers@kernel.org>
Signed-off-by: NArd Biesheuvel <ardb@kernel.org>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

These drivers do not use either the deprecated blkcipher or the current
skcipher walk API, so this comment must refer to a previous state of the
driver that no longer exists. So drop the comments.
Signed-off-by: NArd Biesheuvel <ardb@kernel.org>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

The driver specific types contain some rudimentary references to the
blkcipher API, which is deprecated and will be removed. To avoid confusion,
rename these to skcipher. This is a cosmetic change only, as the code does
not actually use the blkcipher API.
Signed-off-by: NArd Biesheuvel <ardb@kernel.org>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

Commit 7a7ffe65 ("crypto: skcipher - Add top-level skcipher interface")
dated 20 august 2015 introduced the new skcipher API which is supposed to
replace both blkcipher and ablkcipher. While all consumers of the API have
been converted long ago, some producers of the ablkcipher remain, forcing
us to keep the ablkcipher support routines alive, along with the matching
code to expose [a]blkciphers via the skcipher API.

So switch this driver to the skcipher API, allowing us to finally drop the
ablkcipher code in the near future.
Co-developed-by: NGiovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: NGiovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: NArd Biesheuvel <ardb@kernel.org>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

Commit 7a7ffe65 ("crypto: skcipher - Add top-level skcipher interface")
dated 20 august 2015 introduced the new skcipher API which is supposed to
replace both blkcipher and ablkcipher. While all consumers of the API have
been converted long ago, some producers of the ablkcipher remain, forcing
us to keep the ablkcipher support routines alive, along with the matching
code to expose [a]blkciphers via the skcipher API.

So switch this driver to the skcipher API, allowing us to finally drop the
ablkcipher code in the near future.
Signed-off-by: NArd Biesheuvel <ardb@kernel.org>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

Commit 7a7ffe65 ("crypto: skcipher - Add top-level skcipher interface")
dated 20 august 2015 introduced the new skcipher API which is supposed to
replace both blkcipher and ablkcipher. While all consumers of the API have
been converted long ago, some producers of the ablkcipher remain, forcing
us to keep the ablkcipher support routines alive, along with the matching
code to expose [a]blkciphers via the skcipher API.

So switch this driver to the skcipher API, allowing us to finally drop the
ablkcipher code in the near future.

Cc: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: NArd Biesheuvel <ardb@kernel.org>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

Commit 7a7ffe65 ("crypto: skcipher - Add top-level skcipher interface")
dated 20 august 2015 introduced the new skcipher API which is supposed to
replace both blkcipher and ablkcipher. While all consumers of the API have
been converted long ago, some producers of the ablkcipher remain, forcing
us to keep the ablkcipher support routines alive, along with the matching
code to expose [a]blkciphers via the skcipher API.

So switch this driver to the skcipher API, allowing us to finally drop the
ablkcipher code in the near future.
Acked-by: NDavid S. Miller <davem@davemloft.net>
Signed-off-by: NArd Biesheuvel <ardb@kernel.org>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

Commit 7a7ffe65 ("crypto: skcipher - Add top-level skcipher interface")
dated 20 august 2015 introduced the new skcipher API which is supposed to
replace both blkcipher and ablkcipher. While all consumers of the API have
been converted long ago, some producers of the ablkcipher remain, forcing
us to keep the ablkcipher support routines alive, along with the matching
code to expose [a]blkciphers via the skcipher API.

So switch this driver to the skcipher API, allowing us to finally drop the
ablkcipher code in the near future.

Cc: Maxime Coquelin <mcoquelin.stm32@gmail.com>
Cc: Alexandre Torgue <alexandre.torgue@st.com>
Signed-off-by: NArd Biesheuvel <ardb@kernel.org>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

Commit 7a7ffe65 ("crypto: skcipher - Add top-level skcipher interface")
dated 20 august 2015 introduced the new skcipher API which is supposed to
replace both blkcipher and ablkcipher. While all consumers of the API have
been converted long ago, some producers of the ablkcipher remain, forcing
us to keep the ablkcipher support routines alive, along with the matching
code to expose [a]blkciphers via the skcipher API.

So switch this driver to the skcipher API, allowing us to finally drop the
ablkcipher code in the near future.
Reviewed-by: NStanimir Varbanov <stanimir.varbanov@linaro.org>
Signed-off-by: NArd Biesheuvel <ardb@kernel.org>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

Commit 7a7ffe65 ("crypto: skcipher - Add top-level skcipher interface")
dated 20 august 2015 introduced the new skcipher API which is supposed to
replace both blkcipher and ablkcipher. While all consumers of the API have
been converted long ago, some producers of the ablkcipher remain, forcing
us to keep the ablkcipher support routines alive, along with the matching
code to expose [a]blkciphers via the skcipher API.

So switch this driver to the skcipher API, allowing us to finally drop the
ablkcipher code in the near future.

Cc: Jamie Iles <jamie@jamieiles.com>
Signed-off-by: NArd Biesheuvel <ardb@kernel.org>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

Commit 7a7ffe65 ("crypto: skcipher - Add top-level skcipher interface")
dated 20 august 2015 introduced the new skcipher API which is supposed to
replace both blkcipher and ablkcipher. While all consumers of the API have
been converted long ago, some producers of the ablkcipher remain, forcing
us to keep the ablkcipher support routines alive, along with the matching
code to expose [a]blkciphers via the skcipher API.

So switch this driver to the skcipher API, allowing us to finally drop the
ablkcipher code in the near future.
Signed-off-by: NArd Biesheuvel <ardb@kernel.org>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

Commit 7a7ffe65 ("crypto: skcipher - Add top-level skcipher interface")
dated 20 august 2015 introduced the new skcipher API which is supposed to
replace both blkcipher and ablkcipher. While all consumers of the API have
been converted long ago, some producers of the ablkcipher remain, forcing
us to keep the ablkcipher support routines alive, along with the matching
code to expose [a]blkciphers via the skcipher API.

So switch this driver to the skcipher API, allowing us to finally drop the
ablkcipher code in the near future.

Cc: Matthias Brugger <matthias.bgg@gmail.com>
Cc: linux-mediatek@lists.infradead.org
Signed-off-by: NArd Biesheuvel <ardb@kernel.org>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

Commit 7a7ffe65 ("crypto: skcipher - Add top-level skcipher interface")
dated 20 august 2015 introduced the new skcipher API which is supposed to
replace both blkcipher and ablkcipher. While all consumers of the API have
been converted long ago, some producers of the ablkcipher remain, forcing
us to keep the ablkcipher support routines alive, along with the matching
code to expose [a]blkciphers via the skcipher API.

So switch this driver to the skcipher API, allowing us to finally drop the
ablkcipher code in the near future.
Tested-by: NHoria Geantă <horia.geanta@nxp.com>
Signed-off-by: NArd Biesheuvel <ardb@kernel.org>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

Commit 7a7ffe65 ("crypto: skcipher - Add top-level skcipher interface")
dated 20 august 2015 introduced the new skcipher API which is supposed to
replace both blkcipher and ablkcipher. While all consumers of the API have
been converted long ago, some producers of the ablkcipher remain, forcing
us to keep the ablkcipher support routines alive, along with the matching
code to expose [a]blkciphers via the skcipher API.

So switch this driver to the skcipher API, allowing us to finally drop the
ablkcipher code in the near future.
Reviewed-by: NLinus Walleij <linus.walleij@linaro.org>
Signed-off-by: NArd Biesheuvel <ardb@kernel.org>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

Commit 7a7ffe65 ("crypto: skcipher - Add top-level skcipher interface")
dated 20 august 2015 introduced the new skcipher API which is supposed to
replace both blkcipher and ablkcipher. While all consumers of the API have
been converted long ago, some producers of the ablkcipher remain, forcing
us to keep the ablkcipher support routines alive, along with the matching
code to expose [a]blkciphers via the skcipher API.

So switch this driver to the skcipher API, allowing us to finally drop the
ablkcipher code in the near future.
Signed-off-by: NArd Biesheuvel <ardb@kernel.org>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

Commit 7a7ffe65 ("crypto: skcipher - Add top-level skcipher interface")
dated 20 august 2015 introduced the new skcipher API which is supposed to
replace both blkcipher and ablkcipher. While all consumers of the API have
been converted long ago, some producers of the ablkcipher remain, forcing
us to keep the ablkcipher support routines alive, along with the matching
code to expose [a]blkciphers via the skcipher API.

So switch this driver to the skcipher API, allowing us to finally drop the
ablkcipher code in the near future.

Cc: Atul Gupta <atul.gupta@chelsio.com>
Signed-off-by: NArd Biesheuvel <ardb@kernel.org>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

Commit 7a7ffe65 ("crypto: skcipher - Add top-level skcipher interface")
dated 20 august 2015 introduced the new skcipher API which is supposed to
replace both blkcipher and ablkcipher. While all consumers of the API have
been converted long ago, some producers of the ablkcipher remain, forcing
us to keep the ablkcipher support routines alive, along with the matching
code to expose [a]blkciphers via the skcipher API.

So switch this driver to the skcipher API, allowing us to finally drop the
ablkcipher code in the near future.
Signed-off-by: NArd Biesheuvel <ardb@kernel.org>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

Setting the cra_type field is not necessary for skciphers, and ablkcipher
will be removed, so drop the assignment from the nitrox driver.
Signed-off-by: NArd Biesheuvel <ardb@kernel.org>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

Commit 7a7ffe65 ("crypto: skcipher - Add top-level skcipher interface")
dated 20 august 2015 introduced the new skcipher API which is supposed to
replace both blkcipher and ablkcipher. While all consumers of the API have
been converted long ago, some producers of the ablkcipher remain, forcing
us to keep the ablkcipher support routines alive, along with the matching
code to expose [a]blkciphers via the skcipher API.

So switch this driver to the skcipher API, allowing us to finally drop the
ablkcipher code in the near future.
Signed-off-by: NArd Biesheuvel <ardb@kernel.org>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

Commit 7a7ffe65 ("crypto: skcipher - Add top-level skcipher interface")
dated 20 august 2015 introduced the new skcipher API which is supposed to
replace both blkcipher and ablkcipher. While all consumers of the API have
been converted long ago, some producers of the ablkcipher remain, forcing
us to keep the ablkcipher support routines alive, along with the matching
code to expose [a]blkciphers via the skcipher API.

So switch this driver to the skcipher API, allowing us to finally drop the
ablkcipher code in the near future.

Cc: Nicolas Ferre <nicolas.ferre@microchip.com>
Cc: Alexandre Belloni <alexandre.belloni@bootlin.com>
Cc: Ludovic Desroches <ludovic.desroches@microchip.com>
Tested-by: NTudor Ambarus <tudor.ambarus@microchip.com>
Signed-off-by: NArd Biesheuvel <ardb@kernel.org>
Reviewed-by: NTudor Ambarus <tudor.ambarus@microchip.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

Commit 7a7ffe65 ("crypto: skcipher - Add top-level skcipher interface")
dated 20 august 2015 introduced the new skcipher API which is supposed to
replace both blkcipher and ablkcipher. While all consumers of the API have
been converted long ago, some producers of the ablkcipher remain, forcing
us to keep the ablkcipher support routines alive, along with the matching
code to expose [a]blkciphers via the skcipher API.

So switch this driver to the skcipher API, allowing us to finally drop the
ablkcipher code in the near future.

Cc: Nicolas Ferre <nicolas.ferre@microchip.com>
Cc: Alexandre Belloni <alexandre.belloni@bootlin.com>
Cc: Ludovic Desroches <ludovic.desroches@microchip.com>
Tested-by: NTudor Ambarus <tudor.ambarus@microchip.com>
Signed-off-by: NArd Biesheuvel <ardb@kernel.org>
Reviewed-by: NTudor Ambarus <tudor.ambarus@microchip.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

Commit 7a7ffe65 ("crypto: skcipher - Add top-level skcipher interface")
dated 20 august 2015 introduced the new skcipher API which is supposed to
replace both blkcipher and ablkcipher. While all consumers of the API have
been converted long ago, some producers of the ablkcipher remain, forcing
us to keep the ablkcipher support routines alive, along with the matching
code to expose [a]blkciphers via the skcipher API.

So switch this driver to the skcipher API, allowing us to finally drop the
ablkcipher code in the near future.
Reviewed-by: NKamil Konieczny <k.konieczny@samsung.com>
Tested-by: NKamil Konieczny <k.konieczny@samsung.com>
Acked-by: NKrzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: NArd Biesheuvel <ardb@kernel.org>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

Commit 7a7ffe65 ("crypto: skcipher - Add top-level skcipher interface")
dated 20 august 2015 introduced the new skcipher API which is supposed to
replace both blkcipher and ablkcipher. While all consumers of the API have
been converted long ago, some producers of the ablkcipher remain, forcing
us to keep the ablkcipher support routines alive, along with the matching
code to expose [a]blkciphers via the skcipher API.

So switch this driver to the skcipher API, allowing us to finally drop the
ablkcipher code in the near future.
Reviewed-by: NLinus Walleij <linus.walleij@linaro.org>
Signed-off-by: NArd Biesheuvel <ardb@kernel.org>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

Commit 7a7ffe65 ("crypto: skcipher - Add top-level skcipher interface")
dated 20 august 2015 introduced the new skcipher API which is supposed to
replace both blkcipher and ablkcipher. While all consumers of the API have
been converted long ago, some producers of the ablkcipher remain, forcing
us to keep the ablkcipher support routines alive, along with the matching
code to expose [a]blkciphers via the skcipher API.

So switch this driver to the skcipher API, allowing us to finally drop the
ablkcipher code in the near future.

Cc: Tony Lindgren <tony@atomide.com>
Cc: linux-omap@vger.kernel.org
Reviewed-by: NTero Kristo <t-kristo@ti.com>
Tested-by: NTero Kristo <t-kristo@ti.com>
Signed-off-by: NArd Biesheuvel <ardb@kernel.org>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

Commit 7a7ffe65 ("crypto: skcipher - Add top-level skcipher interface")
dated 20 august 2015 introduced the new skcipher API which is supposed to
replace both blkcipher and ablkcipher. While all consumers of the API have
been converted long ago, some producers of the ablkcipher remain, forcing
us to keep the ablkcipher support routines alive, along with the matching
code to expose [a]blkciphers via the skcipher API.

So switch this driver to the skcipher API, allowing us to finally drop the
ablkcipher code in the near future.
Reviewed-by: NGary R Hook <gary.hook@amd.com>
Tested-by: NGary R Hook <gary.hook@amd.com>
Signed-off-by: NArd Biesheuvel <ardb@kernel.org>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>