crypto: hisilicon - add HiSilicon SEC V2 driver

SEC driver provides PCIe hardware device initiation with
AES, SM4, and 3DES skcipher algorithms registered to Crypto.
It uses Hisilicon QM as interface to CPU.
Signed-off-by: NZaibo Xu <xuzaibo@huawei.com>
Signed-off-by: NLongfang Liu <liulongfang@huawei.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

drivers/crypto/hisilicon/Kconfig

@@ -14,6 +14,22 @@ config CRYPTO_DEV_HISI_SEC
 	  To compile this as a module, choose M here: the module
 	  will be called hisi_sec.
 
+config CRYPTO_DEV_HISI_SEC2
+	tristate "Support for HiSilicon SEC2 crypto block cipher accelerator"
+	select CRYPTO_BLKCIPHER
+	select CRYPTO_ALGAPI
+	select CRYPTO_LIB_DES
+	select CRYPTO_DEV_HISI_QM
+	depends on PCI && PCI_MSI
+	depends on ARM64 || (COMPILE_TEST && 64BIT)
+	help
+	  Support for HiSilicon SEC Engine of version 2 in crypto subsystem.
+	  It provides AES, SM4, and 3DES algorithms with ECB
+	  CBC, and XTS cipher mode.
+
+	  To compile this as a module, choose M here: the module
+          will be called hisi_sec2.
+
 config CRYPTO_DEV_HISI_QM
 	tristate
 	depends on ARM64 || COMPILE_TEST

drivers/crypto/hisilicon/Makefile

 # SPDX-License-Identifier: GPL-2.0
 obj-$(CONFIG_CRYPTO_DEV_HISI_HPRE) += hpre/
 obj-$(CONFIG_CRYPTO_DEV_HISI_SEC) += sec/
+obj-$(CONFIG_CRYPTO_DEV_HISI_SEC2) += sec2/
 obj-$(CONFIG_CRYPTO_DEV_HISI_QM) += hisi_qm.o
 hisi_qm-objs = qm.o sgl.o
 obj-$(CONFIG_CRYPTO_DEV_HISI_ZIP) += zip/

drivers/crypto/hisilicon/sec2/Makefile

+obj-$(CONFIG_CRYPTO_DEV_HISI_SEC2) += hisi_sec2.o
+hisi_sec2-objs = sec_main.o sec_crypto.o

drivers/crypto/hisilicon/sec2/sec.h

+/* SPDX-License-Identifier: GPL-2.0 */
+/* Copyright (c) 2019 HiSilicon Limited. */
+
+#ifndef __HISI_SEC_V2_H
+#define __HISI_SEC_V2_H
+
+#include <linux/list.h>
+
+#include "../qm.h"
+#include "sec_crypto.h"
+
+/* Cipher resource per hardware SEC queue */
+struct sec_cipher_res {
+	u8 *c_ivin;
+	dma_addr_t c_ivin_dma;
+};
+
+/* Cipher request of SEC private */
+struct sec_cipher_req {
+	struct hisi_acc_hw_sgl *c_in;
+	dma_addr_t c_in_dma;
+	struct hisi_acc_hw_sgl *c_out;
+	dma_addr_t c_out_dma;
+	u8 *c_ivin;
+	dma_addr_t c_ivin_dma;
+	struct skcipher_request *sk_req;
+	u32 c_len;
+	bool encrypt;
+};
+
+/* SEC request of Crypto */
+struct sec_req {
+	struct sec_sqe sec_sqe;
+	struct sec_ctx *ctx;
+	struct sec_qp_ctx *qp_ctx;
+
+	/* Cipher supported only at present */
+	struct sec_cipher_req c_req;
+	int err_type;
+	int req_id;
+
+	/* Status of the SEC request */
+	int fake_busy;
+};
+
+/**
+ * struct sec_req_op - Operations for SEC request
+ * @get_res: Get resources for TFM on the SEC device
+ * @resource_alloc: Allocate resources for queue context on the SEC device
+ * @resource_free: Free resources for queue context on the SEC device
+ * @buf_map: DMA map the SGL buffers of the request
+ * @buf_unmap: DMA unmap the SGL buffers of the request
+ * @bd_fill: Fill the SEC queue BD
+ * @bd_send: Send the SEC BD into the hardware queue
+ * @callback: Call back for the request
+ * @process: Main processing logic of Skcipher
+ */
+struct sec_req_op {
+	int (*get_res)(struct sec_ctx *ctx, struct sec_req *req);
+	int (*resource_alloc)(struct sec_ctx *ctx, struct sec_qp_ctx *qp_ctx);
+	void (*resource_free)(struct sec_ctx *ctx, struct sec_qp_ctx *qp_ctx);
+	int (*buf_map)(struct sec_ctx *ctx, struct sec_req *req);
+	void (*buf_unmap)(struct sec_ctx *ctx, struct sec_req *req);
+	void (*do_transfer)(struct sec_ctx *ctx, struct sec_req *req);
+	int (*bd_fill)(struct sec_ctx *ctx, struct sec_req *req);
+	int (*bd_send)(struct sec_ctx *ctx, struct sec_req *req);
+	void (*callback)(struct sec_ctx *ctx, struct sec_req *req);
+	int (*process)(struct sec_ctx *ctx, struct sec_req *req);
+};
+
+/* SEC cipher context which cipher's relatives */
+struct sec_cipher_ctx {
+	u8 *c_key;
+	dma_addr_t c_key_dma;
+	sector_t iv_offset;
+	u32 c_gran_size;
+	u32 ivsize;
+	u8 c_mode;
+	u8 c_alg;
+	u8 c_key_len;
+};
+
+/* SEC queue context which defines queue's relatives */
+struct sec_qp_ctx {
+	struct hisi_qp *qp;
+	struct sec_req **req_list;
+	struct idr req_idr;
+	void *alg_meta_data;
+	struct sec_ctx *ctx;
+	struct mutex req_lock;
+	struct hisi_acc_sgl_pool *c_in_pool;
+	struct hisi_acc_sgl_pool *c_out_pool;
+	atomic_t pending_reqs;
+};
+
+/* SEC Crypto TFM context which defines queue and cipher .etc relatives */
+struct sec_ctx {
+	struct sec_qp_ctx *qp_ctx;
+	struct sec_dev *sec;
+	const struct sec_req_op *req_op;
+
+	/* Half queues for encipher, and half for decipher */
+	u32 hlf_q_num;
+
+	/* Threshold for fake busy, trigger to return -EBUSY to user */
+	u32 fake_req_limit;
+
+	/* Currrent cyclic index to select a queue for encipher */
+	atomic_t enc_qcyclic;
+
+	 /* Currrent cyclic index to select a queue for decipher */
+	atomic_t dec_qcyclic;
+	struct sec_cipher_ctx c_ctx;
+};
+
+enum sec_endian {
+	SEC_LE = 0,
+	SEC_32BE,
+	SEC_64BE
+};
+
+struct sec_dev {
+	struct hisi_qm qm;
+	struct list_head list;
+	u32 ctx_q_num;
+	unsigned long status;
+};
+
+struct sec_dev *sec_find_device(int node);
+int sec_register_to_crypto(void);
+void sec_unregister_from_crypto(void);
+#endif

drivers/crypto/hisilicon/sec2/sec_crypto.h

+/* SPDX-License-Identifier: GPL-2.0 */
+/* Copyright (c) 2019 HiSilicon Limited. */
+
+#ifndef __HISI_SEC_V2_CRYPTO_H
+#define __HISI_SEC_V2_CRYPTO_H
+
+#define SEC_IV_SIZE		24
+#define SEC_MAX_KEY_SIZE	64
+#define SEC_COMM_SCENE		0
+
+enum sec_calg {
+	SEC_CALG_3DES = 0x1,
+	SEC_CALG_AES  = 0x2,
+	SEC_CALG_SM4  = 0x3,
+};
+
+enum sec_cmode {
+	SEC_CMODE_ECB    = 0x0,
+	SEC_CMODE_CBC    = 0x1,
+	SEC_CMODE_CTR    = 0x4,
+	SEC_CMODE_XTS    = 0x7,
+};
+
+enum sec_ckey_type {
+	SEC_CKEY_128BIT = 0x0,
+	SEC_CKEY_192BIT = 0x1,
+	SEC_CKEY_256BIT = 0x2,
+	SEC_CKEY_3DES_3KEY = 0x1,
+	SEC_CKEY_3DES_2KEY = 0x3,
+};
+
+enum sec_bd_type {
+	SEC_BD_TYPE1 = 0x1,
+	SEC_BD_TYPE2 = 0x2,
+};
+
+enum sec_cipher_dir {
+	SEC_CIPHER_ENC = 0x1,
+	SEC_CIPHER_DEC = 0x2,
+};
+
+enum sec_addr_type {
+	SEC_PBUF = 0x0,
+	SEC_SGL  = 0x1,
+	SEC_PRP  = 0x2,
+};
+
+struct sec_sqe_type2 {
+
+	/*
+	 * mac_len: 0~5 bits
+	 * a_key_len: 6~10 bits
+	 * a_alg: 11~16 bits
+	 */
+	__le32 mac_key_alg;
+
+	/*
+	 * c_icv_len: 0~5 bits
+	 * c_width: 6~8 bits
+	 * c_key_len: 9~11 bits
+	 * c_mode: 12~15 bits
+	 */
+	__le16 icvw_kmode;
+
+	/* c_alg: 0~3 bits */
+	__u8 c_alg;
+	__u8 rsvd4;
+
+	/*
+	 * a_len: 0~23 bits
+	 * iv_offset_l: 24~31 bits
+	 */
+	__le32 alen_ivllen;
+
+	/*
+	 * c_len: 0~23 bits
+	 * iv_offset_h: 24~31 bits
+	 */
+	__le32 clen_ivhlen;
+
+	__le16 auth_src_offset;
+	__le16 cipher_src_offset;
+	__le16 cs_ip_header_offset;
+	__le16 cs_udp_header_offset;
+	__le16 pass_word_len;
+	__le16 dk_len;
+	__u8 salt3;
+	__u8 salt2;
+	__u8 salt1;
+	__u8 salt0;
+
+	__le16 tag;
+	__le16 rsvd5;
+
+	/*
+	 * c_pad_type: 0~3 bits
+	 * c_pad_len: 4~11 bits
+	 * c_pad_data_type: 12~15 bits
+	 */
+	__le16 cph_pad;
+
+	/* c_pad_len_field: 0~1 bits */
+	__le16 c_pad_len_field;
+
+
+	__le64 long_a_data_len;
+	__le64 a_ivin_addr;
+	__le64 a_key_addr;
+	__le64 mac_addr;
+	__le64 c_ivin_addr;
+	__le64 c_key_addr;
+
+	__le64 data_src_addr;
+	__le64 data_dst_addr;
+
+	/*
+	 * done: 0 bit
+	 * icv: 1~3 bits
+	 * csc: 4~6 bits
+	 * flag: 7-10 bits
+	 * dif_check: 11~13 bits
+	 */
+	__le16 done_flag;
+
+	__u8 error_type;
+	__u8 warning_type;
+	__u8 mac_i3;
+	__u8 mac_i2;
+	__u8 mac_i1;
+	__u8 mac_i0;
+	__le16 check_sum_i;
+	__u8 tls_pad_len_i;
+	__u8 rsvd12;
+	__le32 counter;
+};
+
+struct sec_sqe {
+	/*
+	 * type:	0~3 bits
+	 * cipher:	4~5 bits
+	 * auth:	6~7 bit s
+	 */
+	__u8 type_cipher_auth;
+
+	/*
+	 * seq:	0 bit
+	 * de:	1~2 bits
+	 * scene:	3~6 bits
+	 * src_addr_type: ~7 bit, with sdm_addr_type 0-1 bits
+	 */
+	__u8 sds_sa_type;
+
+	/*
+	 * src_addr_type: 0~1 bits, not used now,
+	 * if support PRP, set this field, or set zero.
+	 * dst_addr_type: 2~4 bits
+	 * mac_addr_type: 5~7 bits
+	 */
+	__u8 sdm_addr_type;
+	__u8 rsvd0;
+
+	/*
+	 * nonce_len(type2): 0~3 bits
+	 * huk(type2): 4 bit
+	 * key_s(type2): 5 bit
+	 * ci_gen: 6~7 bits
+	 */
+	__u8 huk_key_ci;
+
+	/*
+	 * ai_gen: 0~1 bits
+	 * a_pad(type2): 2~3 bits
+	 * c_s(type2): 4~5 bits
+	 */
+	__u8 ai_apd_cs;
+
+	/*
+	 * rhf(type2): 0 bit
+	 * c_key_type: 1~2 bits
+	 * a_key_type: 3~4 bits
+	 * write_frame_len(type2): 5~7 bits
+	 */
+	__u8 rca_key_frm;
+
+	/*
+	 * cal_iv_addr_en(type2): 0 bit
+	 * tls_up(type2): 1 bit
+	 * inveld: 7 bit
+	 */
+	__u8 iv_tls_ld;
+
+	/* Just using type2 BD now */
+	struct sec_sqe_type2 type2;
+};
+
+int sec_register_to_crypto(void);
+void sec_unregister_from_crypto(void);
+#endif

drivers/crypto/hisilicon/sec2/sec_main.c

+// SPDX-License-Identifier: GPL-2.0
+/* Copyright (c) 2019 HiSilicon Limited. */
+
+#include <linux/acpi.h>
+#include <linux/aer.h>
+#include <linux/bitops.h>
+#include <linux/init.h>
+#include <linux/io.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/pci.h>
+#include <linux/seq_file.h>
+#include <linux/topology.h>
+
+#include "sec.h"
+
+#define SEC_QUEUE_NUM_V1		4096
+#define SEC_QUEUE_NUM_V2		1024
+#define SEC_PF_PCI_DEVICE_ID		0xa255
+
+#define SEC_XTS_MIV_ENABLE_REG		0x301384
+#define SEC_XTS_MIV_ENABLE_MSK		0x7FFFFFFF
+#define SEC_XTS_MIV_DISABLE_MSK		0xFFFFFFFF
+#define SEC_BD_ERR_CHK_EN1		0xfffff7fd
+#define SEC_BD_ERR_CHK_EN2		0xffffbfff
+
+#define SEC_SQE_SIZE			128
+#define SEC_SQ_SIZE			(SEC_SQE_SIZE * QM_Q_DEPTH)
+#define SEC_PF_DEF_Q_NUM		64
+#define SEC_PF_DEF_Q_BASE		0
+#define SEC_CTX_Q_NUM_DEF		24
+
+#define SEC_ENGINE_PF_CFG_OFF		0x300000
+#define SEC_ACC_COMMON_REG_OFF		0x1000
+#define SEC_CORE_INT_SOURCE		0x301010
+#define SEC_CORE_INT_MASK		0x301000
+#define SEC_CORE_INT_STATUS		0x301008
+#define SEC_CORE_SRAM_ECC_ERR_INFO	0x301C14
+#define SEC_ECC_NUM(err)			(((err) >> 16) & 0xFF)
+#define SEC_ECC_ADDR(err)			((err) >> 0)
+#define SEC_CORE_INT_DISABLE		0x0
+#define SEC_CORE_INT_ENABLE		0x1ff
+
+#define SEC_RAS_CE_REG			0x50
+#define SEC_RAS_FE_REG			0x54
+#define SEC_RAS_NFE_REG			0x58
+#define SEC_RAS_CE_ENB_MSK		0x88
+#define SEC_RAS_FE_ENB_MSK		0x0
+#define SEC_RAS_NFE_ENB_MSK		0x177
+#define SEC_RAS_DISABLE			0x0
+#define SEC_MEM_START_INIT_REG		0x0100
+#define SEC_MEM_INIT_DONE_REG		0x0104
+#define SEC_QM_ABNORMAL_INT_MASK	0x100004
+
+#define SEC_CONTROL_REG			0x0200
+#define SEC_TRNG_EN_SHIFT		8
+#define SEC_CLK_GATE_ENABLE		BIT(3)
+#define SEC_CLK_GATE_DISABLE		(~BIT(3))
+#define SEC_AXI_SHUTDOWN_ENABLE	BIT(12)
+#define SEC_AXI_SHUTDOWN_DISABLE	0xFFFFEFFF
+
+#define SEC_INTERFACE_USER_CTRL0_REG	0x0220
+#define SEC_INTERFACE_USER_CTRL1_REG	0x0224
+#define SEC_BD_ERR_CHK_EN_REG1		0x0384
+#define SEC_BD_ERR_CHK_EN_REG2		0x038c
+
+#define SEC_USER0_SMMU_NORMAL		(BIT(23) | BIT(15))
+#define SEC_USER1_SMMU_NORMAL		(BIT(31) | BIT(23) | BIT(15) | BIT(7))
+#define SEC_CORE_INT_STATUS_M_ECC	BIT(2)
+
+#define SEC_DELAY_10_US			10
+#define SEC_POLL_TIMEOUT_US		1000
+
+#define SEC_ADDR(qm, offset) ((qm)->io_base + (offset) + \
+			     SEC_ENGINE_PF_CFG_OFF + SEC_ACC_COMMON_REG_OFF)
+
+struct sec_hw_error {
+	u32 int_msk;
+	const char *msg;
+};
+
+static const char sec_name[] = "hisi_sec2";
+static LIST_HEAD(sec_list);
+static DEFINE_MUTEX(sec_list_lock);
+
+static const struct sec_hw_error sec_hw_errors[] = {
+	{.int_msk = BIT(0), .msg = "sec_axi_rresp_err_rint"},
+	{.int_msk = BIT(1), .msg = "sec_axi_bresp_err_rint"},
+	{.int_msk = BIT(2), .msg = "sec_ecc_2bit_err_rint"},
+	{.int_msk = BIT(3), .msg = "sec_ecc_1bit_err_rint"},
+	{.int_msk = BIT(4), .msg = "sec_req_trng_timeout_rint"},
+	{.int_msk = BIT(5), .msg = "sec_fsm_hbeat_rint"},
+	{.int_msk = BIT(6), .msg = "sec_channel_req_rng_timeout_rint"},
+	{.int_msk = BIT(7), .msg = "sec_bd_err_rint"},
+	{.int_msk = BIT(8), .msg = "sec_chain_buff_err_rint"},
+	{ /* sentinel */ }
+};
+
+struct sec_dev *sec_find_device(int node)
+{
+#define SEC_NUMA_MAX_DISTANCE	100
+	int min_distance = SEC_NUMA_MAX_DISTANCE;
+	int dev_node = 0, free_qp_num = 0;
+	struct sec_dev *sec, *ret = NULL;
+	struct hisi_qm *qm;
+	struct device *dev;
+
+	mutex_lock(&sec_list_lock);
+	list_for_each_entry(sec, &sec_list, list) {
+		qm = &sec->qm;
+		dev = &qm->pdev->dev;
+#ifdef CONFIG_NUMA
+		dev_node = dev->numa_node;
+		if (dev_node < 0)
+			dev_node = 0;
+#endif
+		if (node_distance(dev_node, node) < min_distance) {
+			free_qp_num = hisi_qm_get_free_qp_num(qm);
+			if (free_qp_num >= sec->ctx_q_num) {
+				ret = sec;
+				min_distance = node_distance(dev_node, node);
+			}
+		}
+	}
+	mutex_unlock(&sec_list_lock);
+
+	return ret;
+}
+
+static int sec_pf_q_num_set(const char *val, const struct kernel_param *kp)
+{
+	struct pci_dev *pdev;
+	u32 n, q_num;
+	u8 rev_id;
+	int ret;
+
+	if (!val)
+		return -EINVAL;
+
+	pdev = pci_get_device(PCI_VENDOR_ID_HUAWEI,
+			      SEC_PF_PCI_DEVICE_ID, NULL);
+	if (!pdev) {
+		q_num = min_t(u32, SEC_QUEUE_NUM_V1, SEC_QUEUE_NUM_V2);
+		pr_info("No device, suppose queue number is %d!\n", q_num);
+	} else {
+		rev_id = pdev->revision;
+
+		switch (rev_id) {
+		case QM_HW_V1:
+			q_num = SEC_QUEUE_NUM_V1;
+			break;
+		case QM_HW_V2:
+			q_num = SEC_QUEUE_NUM_V2;
+			break;
+		default:
+			return -EINVAL;
+		}
+	}
+
+	ret = kstrtou32(val, 10, &n);
+	if (ret || !n || n > q_num)
+		return -EINVAL;
+
+	return param_set_int(val, kp);
+}
+
+static const struct kernel_param_ops sec_pf_q_num_ops = {
+	.set = sec_pf_q_num_set,
+	.get = param_get_int,
+};
+static u32 pf_q_num = SEC_PF_DEF_Q_NUM;
+module_param_cb(pf_q_num, &sec_pf_q_num_ops, &pf_q_num, 0444);
+MODULE_PARM_DESC(pf_q_num, "Number of queues in PF(v1 0-4096, v2 0-1024)");
+
+static int sec_ctx_q_num_set(const char *val, const struct kernel_param *kp)
+{
+	u32 ctx_q_num;
+	int ret;
+
+	if (!val)
+		return -EINVAL;
+
+	ret = kstrtou32(val, 10, &ctx_q_num);
+	if (ret)
+		return -EINVAL;
+
+	if (!ctx_q_num || ctx_q_num > QM_Q_DEPTH || ctx_q_num & 0x1) {
+		pr_err("ctx queue num[%u] is invalid!\n", ctx_q_num);
+		return -EINVAL;
+	}
+
+	return param_set_int(val, kp);
+}
+
+static const struct kernel_param_ops sec_ctx_q_num_ops = {
+	.set = sec_ctx_q_num_set,
+	.get = param_get_int,
+};
+static u32 ctx_q_num = SEC_CTX_Q_NUM_DEF;
+module_param_cb(ctx_q_num, &sec_ctx_q_num_ops, &ctx_q_num, 0444);
+MODULE_PARM_DESC(ctx_q_num, "Number of queue in ctx (2, 4, 6, ..., 1024)");
+
+static const struct pci_device_id sec_dev_ids[] = {
+	{ PCI_DEVICE(PCI_VENDOR_ID_HUAWEI, SEC_PF_PCI_DEVICE_ID) },
+	{ 0, }
+};
+MODULE_DEVICE_TABLE(pci, sec_dev_ids);
+
+static inline void sec_add_to_list(struct sec_dev *sec)
+{
+	mutex_lock(&sec_list_lock);
+	list_add_tail(&sec->list, &sec_list);
+	mutex_unlock(&sec_list_lock);
+}
+
+static inline void sec_remove_from_list(struct sec_dev *sec)
+{
+	mutex_lock(&sec_list_lock);
+	list_del(&sec->list);
+	mutex_unlock(&sec_list_lock);
+}
+
+static u8 sec_get_endian(struct sec_dev *sec)
+{
+	struct hisi_qm *qm = &sec->qm;
+	u32 reg;
+
+	reg = readl_relaxed(qm->io_base + SEC_ENGINE_PF_CFG_OFF +
+			    SEC_ACC_COMMON_REG_OFF + SEC_CONTROL_REG);
+
+	/* BD little endian mode */
+	if (!(reg & BIT(0)))
+		return SEC_LE;
+
+	/* BD 32-bits big endian mode */
+	else if (!(reg & BIT(1)))
+		return SEC_32BE;
+
+	/* BD 64-bits big endian mode */
+	else
+		return SEC_64BE;
+}
+
+static int sec_engine_init(struct sec_dev *sec)
+{
+	struct hisi_qm *qm = &sec->qm;
+	int ret;
+	u32 reg;
+
+	/* disable clock gate control */
+	reg = readl_relaxed(SEC_ADDR(qm, SEC_CONTROL_REG));
+	reg &= SEC_CLK_GATE_DISABLE;
+	writel_relaxed(reg, SEC_ADDR(qm, SEC_CONTROL_REG));
+
+	writel_relaxed(0x1, SEC_ADDR(qm, SEC_MEM_START_INIT_REG));
+
+	ret = readl_relaxed_poll_timeout(SEC_ADDR(qm, SEC_MEM_INIT_DONE_REG),
+					 reg, reg & 0x1, SEC_DELAY_10_US,
+					 SEC_POLL_TIMEOUT_US);
+	if (ret) {
+		dev_err(&qm->pdev->dev, "fail to init sec mem\n");
+		return ret;
+	}
+
+	reg = readl_relaxed(SEC_ADDR(qm, SEC_CONTROL_REG));
+	reg |= (0x1 << SEC_TRNG_EN_SHIFT);
+	writel_relaxed(reg, SEC_ADDR(qm, SEC_CONTROL_REG));
+
+	reg = readl_relaxed(SEC_ADDR(qm, SEC_INTERFACE_USER_CTRL0_REG));
+	reg |= SEC_USER0_SMMU_NORMAL;
+	writel_relaxed(reg, SEC_ADDR(qm, SEC_INTERFACE_USER_CTRL0_REG));
+
+	reg = readl_relaxed(SEC_ADDR(qm, SEC_INTERFACE_USER_CTRL1_REG));
+	reg |= SEC_USER1_SMMU_NORMAL;
+	writel_relaxed(reg, SEC_ADDR(qm, SEC_INTERFACE_USER_CTRL1_REG));
+
+	writel_relaxed(SEC_BD_ERR_CHK_EN1,
+		       SEC_ADDR(qm, SEC_BD_ERR_CHK_EN_REG1));
+	writel_relaxed(SEC_BD_ERR_CHK_EN2,
+		       SEC_ADDR(qm, SEC_BD_ERR_CHK_EN_REG2));
+
+	/* enable clock gate control */
+	reg = readl_relaxed(SEC_ADDR(qm, SEC_CONTROL_REG));
+	reg |= SEC_CLK_GATE_ENABLE;
+	writel_relaxed(reg, SEC_ADDR(qm, SEC_CONTROL_REG));
+
+	/* config endian */
+	reg = readl_relaxed(SEC_ADDR(qm, SEC_CONTROL_REG));
+	reg |= sec_get_endian(sec);
+	writel_relaxed(reg, SEC_ADDR(qm, SEC_CONTROL_REG));
+
+	/* Enable sm4 xts mode multiple iv */
+	writel_relaxed(SEC_XTS_MIV_ENABLE_MSK,
+		       qm->io_base + SEC_XTS_MIV_ENABLE_REG);
+
+	return 0;
+}
+
+static int sec_set_user_domain_and_cache(struct sec_dev *sec)
+{
+	struct hisi_qm *qm = &sec->qm;
+
+	/* qm user domain */
+	writel(AXUSER_BASE, qm->io_base + QM_ARUSER_M_CFG_1);
+	writel(ARUSER_M_CFG_ENABLE, qm->io_base + QM_ARUSER_M_CFG_ENABLE);
+	writel(AXUSER_BASE, qm->io_base + QM_AWUSER_M_CFG_1);
+	writel(AWUSER_M_CFG_ENABLE, qm->io_base + QM_AWUSER_M_CFG_ENABLE);
+	writel(WUSER_M_CFG_ENABLE, qm->io_base + QM_WUSER_M_CFG_ENABLE);
+
+	/* qm cache */
+	writel(AXI_M_CFG, qm->io_base + QM_AXI_M_CFG);
+	writel(AXI_M_CFG_ENABLE, qm->io_base + QM_AXI_M_CFG_ENABLE);
+
+	/* disable FLR triggered by BME(bus master enable) */
+	writel(PEH_AXUSER_CFG, qm->io_base + QM_PEH_AXUSER_CFG);
+	writel(PEH_AXUSER_CFG_ENABLE, qm->io_base + QM_PEH_AXUSER_CFG_ENABLE);
+
+	/* enable sqc,cqc writeback */
+	writel(SQC_CACHE_ENABLE | CQC_CACHE_ENABLE | SQC_CACHE_WB_ENABLE |
+	       CQC_CACHE_WB_ENABLE | FIELD_PREP(SQC_CACHE_WB_THRD, 1) |
+	       FIELD_PREP(CQC_CACHE_WB_THRD, 1), qm->io_base + QM_CACHE_CTL);
+
+	return sec_engine_init(sec);
+}
+
+static void sec_hw_error_enable(struct sec_dev *sec)
+{
+	struct hisi_qm *qm = &sec->qm;
+	u32 val;
+
+	if (qm->ver == QM_HW_V1) {
+		writel(SEC_CORE_INT_DISABLE, qm->io_base + SEC_CORE_INT_MASK);
+		dev_info(&qm->pdev->dev, "V1 not support hw error handle\n");
+		return;
+	}
+
+	val = readl(qm->io_base + SEC_CONTROL_REG);
+
+	/* clear SEC hw error source if having */
+	writel(SEC_CORE_INT_DISABLE, qm->io_base + SEC_CORE_INT_SOURCE);
+
+	/* enable SEC hw error interrupts */
+	writel(SEC_CORE_INT_ENABLE, qm->io_base + SEC_CORE_INT_MASK);
+
+	/* enable RAS int */
+	writel(SEC_RAS_CE_ENB_MSK, qm->io_base + SEC_RAS_CE_REG);
+	writel(SEC_RAS_FE_ENB_MSK, qm->io_base + SEC_RAS_FE_REG);
+	writel(SEC_RAS_NFE_ENB_MSK, qm->io_base + SEC_RAS_NFE_REG);
+
+	/* enable SEC block master OOO when m-bit error occur */
+	val = val | SEC_AXI_SHUTDOWN_ENABLE;
+
+	writel(val, qm->io_base + SEC_CONTROL_REG);
+}
+
+static void sec_hw_error_disable(struct sec_dev *sec)
+{
+	struct hisi_qm *qm = &sec->qm;
+	u32 val;
+
+	val = readl(qm->io_base + SEC_CONTROL_REG);
+
+	/* disable RAS int */
+	writel(SEC_RAS_DISABLE, qm->io_base + SEC_RAS_CE_REG);
+	writel(SEC_RAS_DISABLE, qm->io_base + SEC_RAS_FE_REG);
+	writel(SEC_RAS_DISABLE, qm->io_base + SEC_RAS_NFE_REG);
+
+	/* disable SEC hw error interrupts */
+	writel(SEC_CORE_INT_DISABLE, qm->io_base + SEC_CORE_INT_MASK);
+
+	/* disable SEC block master OOO when m-bit error occur */
+	val = val & SEC_AXI_SHUTDOWN_DISABLE;
+
+	writel(val, qm->io_base + SEC_CONTROL_REG);
+}
+
+static void sec_hw_error_init(struct sec_dev *sec)
+{
+	hisi_qm_hw_error_init(&sec->qm, QM_BASE_CE,
+			      QM_BASE_NFE | QM_ACC_DO_TASK_TIMEOUT
+			      | QM_ACC_WB_NOT_READY_TIMEOUT, 0,
+			      QM_DB_RANDOM_INVALID);
+	sec_hw_error_enable(sec);
+}
+
+static void sec_hw_error_uninit(struct sec_dev *sec)
+{
+	sec_hw_error_disable(sec);
+	writel(GENMASK(12, 0), sec->qm.io_base + SEC_QM_ABNORMAL_INT_MASK);
+}
+
+static int sec_pf_probe_init(struct sec_dev *sec)
+{
+	struct hisi_qm *qm = &sec->qm;
+	int ret;
+
+	switch (qm->ver) {
+	case QM_HW_V1:
+		qm->ctrl_qp_num = SEC_QUEUE_NUM_V1;
+		break;
+
+	case QM_HW_V2:
+		qm->ctrl_qp_num = SEC_QUEUE_NUM_V2;
+		break;
+
+	default:
+		return -EINVAL;
+	}
+
+	ret = sec_set_user_domain_and_cache(sec);
+	if (ret)
+		return ret;
+
+	sec_hw_error_init(sec);
+
+	return 0;
+}
+
+static int sec_qm_init(struct hisi_qm *qm, struct pci_dev *pdev)
+{
+	enum qm_hw_ver rev_id;
+
+	rev_id = hisi_qm_get_hw_version(pdev);
+	if (rev_id == QM_HW_UNKNOWN)
+		return -ENODEV;
+
+	qm->pdev = pdev;
+	qm->ver = rev_id;
+
+	qm->sqe_size = SEC_SQE_SIZE;
+	qm->dev_name = sec_name;
+	qm->fun_type = (pdev->device == SEC_PF_PCI_DEVICE_ID) ?
+			QM_HW_PF : QM_HW_VF;
+	qm->use_dma_api = true;
+
+	return hisi_qm_init(qm);
+}
+
+static void sec_qm_uninit(struct hisi_qm *qm)
+{
+	hisi_qm_uninit(qm);
+}
+
+static int sec_probe_init(struct hisi_qm *qm, struct sec_dev *sec)
+{
+	qm->qp_base = SEC_PF_DEF_Q_BASE;
+	qm->qp_num = pf_q_num;
+
+	return sec_pf_probe_init(sec);
+}
+
+static void sec_probe_uninit(struct sec_dev *sec)
+{
+	sec_hw_error_uninit(sec);
+}
+
+static int sec_probe(struct pci_dev *pdev, const struct pci_device_id *id)
+{
+	struct sec_dev *sec;
+	struct hisi_qm *qm;
+	int ret;
+
+	sec = devm_kzalloc(&pdev->dev, sizeof(*sec), GFP_KERNEL);
+	if (!sec)
+		return -ENOMEM;
+
+	pci_set_drvdata(pdev, sec);
+
+	sec->ctx_q_num = ctx_q_num;
+
+	qm = &sec->qm;
+
+	ret = sec_qm_init(qm, pdev);
+	if (ret) {
+		pci_err(pdev, "Failed to pre init qm!\n");
+		return ret;
+	}
+
+	ret = sec_probe_init(qm, sec);
+	if (ret) {
+		pci_err(pdev, "Failed to probe!\n");
+		goto err_qm_uninit;
+	}
+
+	ret = hisi_qm_start(qm);
+	if (ret) {
+		pci_err(pdev, "Failed to start sec qm!\n");
+		goto err_probe_uninit;
+	}
+
+	sec_add_to_list(sec);
+
+	ret = sec_register_to_crypto();
+	if (ret < 0) {
+		pr_err("Failed to register driver to crypto.\n");
+		goto err_remove_from_list;
+	}
+
+	return 0;
+
+err_remove_from_list:
+	sec_remove_from_list(sec);
+	hisi_qm_stop(qm);
+
+err_probe_uninit:
+	sec_probe_uninit(sec);
+
+err_qm_uninit:
+	sec_qm_uninit(qm);
+
+	return ret;
+}
+
+static void sec_remove(struct pci_dev *pdev)
+{
+	struct sec_dev *sec = pci_get_drvdata(pdev);
+	struct hisi_qm *qm = &sec->qm;
+
+	sec_unregister_from_crypto();
+
+	sec_remove_from_list(sec);
+
+	(void)hisi_qm_stop(qm);
+
+	sec_probe_uninit(sec);
+
+	sec_qm_uninit(qm);
+}
+
+static void sec_log_hw_error(struct sec_dev *sec, u32 err_sts)
+{
+	const struct sec_hw_error *errs = sec_hw_errors;
+	struct device *dev = &sec->qm.pdev->dev;
+	u32 err_val;
+
+	while (errs->msg) {
+		if (errs->int_msk & err_sts) {
+			dev_err(dev, "%s [error status=0x%x] found\n",
+				errs->msg, errs->int_msk);
+
+			if (SEC_CORE_INT_STATUS_M_ECC & err_sts) {
+				err_val = readl(sec->qm.io_base +
+						SEC_CORE_SRAM_ECC_ERR_INFO);
+				dev_err(dev, "multi ecc sram num=0x%x\n",
+					SEC_ECC_NUM(err_val));
+				dev_err(dev, "multi ecc sram addr=0x%x\n",
+					SEC_ECC_ADDR(err_val));
+			}
+		}
+		errs++;
+	}
+}
+
+static pci_ers_result_t sec_hw_error_handle(struct sec_dev *sec)
+{
+	u32 err_sts;
+
+	/* read err sts */
+	err_sts = readl(sec->qm.io_base + SEC_CORE_INT_STATUS);
+	if (err_sts) {
+		sec_log_hw_error(sec, err_sts);
+
+		/* clear error interrupts */
+		writel(err_sts, sec->qm.io_base + SEC_CORE_INT_SOURCE);
+
+		return PCI_ERS_RESULT_NEED_RESET;
+	}
+
+	return PCI_ERS_RESULT_RECOVERED;
+}
+
+static pci_ers_result_t sec_process_hw_error(struct pci_dev *pdev)
+{
+	struct sec_dev *sec = pci_get_drvdata(pdev);
+	pci_ers_result_t qm_ret, sec_ret;
+
+	if (!sec) {
+		pci_err(pdev, "Can't recover error during device init\n");
+		return PCI_ERS_RESULT_NONE;
+	}
+
+	/* log qm error */
+	qm_ret = hisi_qm_hw_error_handle(&sec->qm);
+
+	/* log sec error */
+	sec_ret = sec_hw_error_handle(sec);
+
+	return (qm_ret == PCI_ERS_RESULT_NEED_RESET ||
+		sec_ret == PCI_ERS_RESULT_NEED_RESET) ?
+		PCI_ERS_RESULT_NEED_RESET : PCI_ERS_RESULT_RECOVERED;
+}
+
+static pci_ers_result_t sec_error_detected(struct pci_dev *pdev,
+					   pci_channel_state_t state)
+{
+	pci_info(pdev, "PCI error detected, state(=%d)!!\n", state);
+	if (state == pci_channel_io_perm_failure)
+		return PCI_ERS_RESULT_DISCONNECT;
+
+	return sec_process_hw_error(pdev);
+}
+
+static const struct pci_error_handlers sec_err_handler = {
+	.error_detected = sec_error_detected,
+};
+
+static struct pci_driver sec_pci_driver = {
+	.name = "hisi_sec2",
+	.id_table = sec_dev_ids,
+	.probe = sec_probe,
+	.remove = sec_remove,
+	.err_handler = &sec_err_handler,
+};
+
+static int __init sec_init(void)
+{
+	int ret;
+
+	ret = pci_register_driver(&sec_pci_driver);
+	if (ret < 0) {
+		pr_err("Failed to register pci driver.\n");
+		return ret;
+	}
+
+	return 0;
+}
+
+static void __exit sec_exit(void)
+{
+	pci_unregister_driver(&sec_pci_driver);
+}
+
+module_init(sec_init);
+module_exit(sec_exit);
+
+MODULE_LICENSE("GPL v2");
+MODULE_AUTHOR("Zaibo Xu <xuzaibo@huawei.com>");
+MODULE_AUTHOR("Longfang Liu <liulongfang@huawei.com>");
+MODULE_AUTHOR("Wei Zhang <zhangwei375@huawei.com>");
+MODULE_DESCRIPTION("Driver for HiSilicon SEC accelerator");