- 26 1月, 2008 5 次提交
-
-
由 Steven Toth 提交于
Previous patches assume the tuner was on a different gpio. This patch corrects this. Signed-off-by: NSteven Toth <stoth@hauppauge.com> Signed-off-by: NChaogui Zhang <czhang1974@gmail.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
由 Steven Toth 提交于
xc5000: Small amount of cleanup and commenting, just for clarification. Signed-off-by: NSteven Toth <stoth@hauppauge.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
由 Steven Toth 提交于
From Zhang: This patch continues the support for the Pinnacle HD 800i. Patch committed as-is, cleanups to follow ... Steve Signed-off-by: NChaogui Zhang <czhang1974@gmail.com> Signed-off-by: NSteven Toth <stoth@hauppauge.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
由 Ricardo Cerqueira 提交于
Fix lack of audio on the MPEG-2 stream of wm8775 based blackbirds. The wm8775 module initializes the audio input at "route 2", which doesn't hold true for all boards. The HVR-1300, for example, uses route 1 for tuner audio, and route 2 for baseband. So we must route the audio to the proper input depending on what video input is being used. Signed-off-by: NRicardo Cerqueira <v4l@cerqueira.org> Signed-off-by: NMichael Krufky <mkrufky@linuxtv.org> Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
由 Mauro Carvalho Chehab 提交于
This board has some special tea5767 configuration. Basically, radio XTAL uses a different frequency than the other supported radios. It uses a 13 MHz XTAL. This patch adds the proper radio gpio and tea5767 configurations for the board. Also, with PAL/BG, the board requires some special init for tda9887: port1=0 port2=0 qss=1 Thanks to Serge Kolotylo and MIDImaster for their help on identifying the proper needs for this driver. Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
- 10 10月, 2007 5 次提交
-
-
由 Trent Piepho 提交于
Used for the PCI_INTMSK and PCI_INT_STAT registers. Signed-off-by: NTrent Piepho <xyzzy@speakeasy.org> Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
由 Trent Piepho 提交于
Get rid of the "CORE" prefix from cx88 printks. It was only used a few times, and it makes it look like they're coming from the kernel core or something. Fix the message, "TV tuner 60 at 0x1fe, Radio tuner -1 at 0x1fe", by adding a "cx88[0]" prefix to be consistent, and to keep people who grep their dmesg output for cx88 from missing it. Get rid of the addresses, which are always wrong. The addresses are always set to -1, but because it's an unsigned 8-bit value, the left shift converts it to the nonsense address 0x1fe. In the cx8802 driver, some cut and pasted code prefixed lines with "CORE cx88[0]:", which has been changed to "cx88[0]/2:" like the other printks from the cx8802 driver. Also fix some ugly printks in the cx8802 driver that used __FUNCTION__ for KERN_INFO and KERN_ERR messages. The changed printks in cx88-mpeg.c also needed lots of whitespace and 80-column fixes. A bunch of misc changes in cx88-dvb.c and cx88-video.c to add message levels or a consistent "cx88[?]/2" or "cx88[?]/0" prefix. Signed-off-by: NTrent Piepho <xyzzy@speakeasy.org> Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
由 Trent Piepho 提交于
A lot of code in cx88-cards.c was only used by cx88-core.c when the core state is first allocated and initialized. Moving that task to cx88-cards makes the driver simpler and the files more self contained. - Module parameters tuner, radio, card, and latency move to cx88-cards.c - cx88_boards is made static - cx88_subids is made static and const - cx88_bcount is eliminated - cx88_idcount is eliminated - cx88_card_list() is made static - cx88_card_setup_pre_i2c() is made static - cx88_card_setup() is made static - cx88_pci_quirks() is moved from cx88-core to cx88-cards The function argument "char *name" is made const too - get_ressources() is moved from cx88-core to cx88-cards, and renamed to cx88_get_resources() - The code to allocate and initialize the core state struct and the chip is moved out of cx88-core.c:cx88_get_core() and into a new function in cx88-cards.c, cx88_core_create(). This makes both functions simpler. Signed-off-by: NTrent Piepho <xyzzy@speakeasy.org> Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
由 Trent Piepho 提交于
The cx88 driver state stored the ID of the board type in core->board. Every time the driver need to get some information about the board configuration, it uses the board number as an index into board configuration array. This patch changes it so that the board number is in core->boardnr, and core->board is a copy of the board configuration information. This allows access to board information without the extra indirection. e.g. cx88_boards[core->board].mpeg becomes core->board.mpeg. This has a number of advantages: - The code is simpler to write. - It compiles to be smaller and faster, without needing the extra array lookup to get at the board information. - The cx88_boards array no longer needs to be exported to all cx88 modules. - The boards array can be made const - It should be possible to avoid keeping the (large) cx88_boards array around after the module is loaded. - If module parameters or eeprom info override some board configuration setting, it's not necessary to modify the boards array, which would affect all boards of the same type. Signed-off-by: NTrent Piepho <xyzzy@speakeasy.org> Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
由 Trent Piepho 提交于
After some tedious work with a logic probe and a magnifying glass, I've determined that GPIO 7 is used to switch between the DTT7612's Sound 4.5 MHz IF output on pin 12 and the FM 10.7MHz If output on pin 11. GPIO 2 is used to switch the card's analog sound output from from the analog input connector to the CX23883's audio DACs. So, in radio mode GPIO2 = 1 and GPIO7 = 0. Add some comments about how the HD-3000's GPIOs are connected. Delete the vmux setting for the radio, as vmux doesn't apply to radio mode. Also delete the lines setting unused gpio words to zero; it's not necessary as 0 is the default value for uninitialized fields. Signed-off-by: NTrent Piepho <xyzzy@speakeasy.org> Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
- 19 7月, 2007 1 次提交
-
-
由 Daniel Gimpelevich 提交于
Signed-off-by: NDaniel Gimpelevich <daniel@gimpelevich.san-francisco.ca.us> Signed-off-by: NMichael Krufky <mkrufky@linuxtv.org> Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
- 28 4月, 2007 4 次提交
-
-
由 Jean Delvare 提交于
Add support for the S-Video and CVBS (composite) analog video inputs of the Leadtek WinFast DTV1000 T adapter. Signed-off-by: NJean Delvare <khali@linux-fr.org> Acked-by: NMichael Krufky <mkrufky@linuxtv.org> Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
由 Mauro Carvalho Chehab 提交于
ATI HDTV Wonder needs to initialize some registers before allowing the tuner to start working. The current logic have lots of magic. This patch makes the code cleaner, using ARRAY_SIZE() for the initialization array and using a bidimensional array, instead of doing some stuff like: &buffer[i+2] Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
由 Michael Krufky 提交于
replace leading spaces with tabs Signed-off-by: NMichael Krufky <mkrufky@linuxtv.org> Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
由 Michael Krufky 提交于
The ADS Tech InstantTV DVB-S is a clone of the KWorld DVB-S 100. This patch adds autodetection support for this card based on pci subsystem id. Signed-off-by: NMichael Krufky <mkrufky@linuxtv.org> Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
- 21 2月, 2007 1 次提交
-
-
由 Heiko Baums 提交于
Adds support for the combined S-Video/Composite input of the Terratec Cinergy 1400 DVB-T. Signed-off-by: NHeiko Baums <heiko@baums-on-web.de> Signed-off-by: NMichael Krufky <mkrufky@linuxtv.org> Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
- 28 12月, 2006 1 次提交
-
-
由 Jean Delvare 提交于
reference to .init.text: from .text between 'cx88_card_setup' (at offset 0x68c) and 'cx88_risc_field' Caused by leadtek_eeprom() being declared __devinit and called from a non-devinit context. Signed-off-by: NJean Delvare <khali@linux-fr.org> Signed-off-by: NMichael Krufky <mkrufky@linuxtv.org> Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
- 10 12月, 2006 6 次提交
-
-
由 Jelle Foks 提交于
Add subvendor/device of the ADSTech Instant TV Deluxe PTV-305 to the card list as card=45 (KWORLD_HARDWARE_MPEG_TV_XPERT). Signed-off-by: NJelle Foks <jelle@foks.8m.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
由 Michael Krufky 提交于
For the ASUS PVR-416, the external adc must be used for the rca audio inputs, but television / radio inputs use the internal adc. Thanks to Alex Deucher for lending his card to me. Signed-off-by: NMichael Krufky <mkrufky@linuxtv.org> Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
由 Michael Krufky 提交于
For the KWorld HardwareMpegTV XPert, the external adc must be used for svideo / composite inputs, but television / radio inputs use the internal adc. Signed-off-by: NMichael Krufky <mkrufky@linuxtv.org> Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
由 Michael Krufky 提交于
Some cx88-blackbird boards use an external adc, but not necessarily for all inputs. Thus, this needs to be configurable on the card level for each input. This patch allows for the usage of the external adc to be determined by a bit setting in the cx88_input struct for cards based on the cx88 blackbird design. Signed-off-by: NMichael Krufky <mkrufky@linuxtv.org> Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
由 Michael Krufky 提交于
- fixed whitespace, replaced leading spaces with tabs - moved .mpeg descriptor below input settings Signed-off-by: NMichael Krufky <mkrufky@linuxtv.org> Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
由 Steven Toth 提交于
A series of patches to change the cx88 framework to allow the PCI mpeg port to be shared dynamically between different types of drivers or applications. This patch changes the cx88-dvb and cx88-blackbird drivers to become 'sub drivers' of a higher single cx88-mpeg driver. The cx88-mpeg driver is a superset of the previous cx88-mpeg/blackbird drivers and now owns the IRQ. cx88-dvb/blackbird now become mini drivers, registering themselves with cx88-mpeg through a standard interface with callbacks. Sub drivers request access to hardware via the cx88-mpeg driver. In turn the cx88-mpeg driver determines whether the hardware is busy and accepts or refuses the request, grant access using callbacks into the sub drivers. The net effect is that you are no longer able to tamper with the mpeg port from multiple different applications at the same time, potentially breaking a live mpeg2 hardware encoding or dvb stream. The mechanism extends to enable multiple dvb frontends to be registered and share the single resource. Signed-off-by: NSteven Toth <stoth@hauppauge.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
- 14 10月, 2006 1 次提交
-
-
由 Steven Toth 提交于
The WinTV-HVR3000 is currently defined for analog support only. This patch adds full DVB-T support. (DVB-S support will be added soon) Signed-off-by: NSteven Toth <stoth@hauppauge.com> Signed-off-by: NMichael Krufky <mkrufky@linuxtv.org> Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
- 04 10月, 2006 5 次提交
-
-
由 Steven Toth 提交于
Adding support for Nova-T-PCI PCI ID 0070:9000 Signed-off-by: NSteven Toth <stoth@hauppauge.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
由 Michael Krufky 提交于
The Club3D Zap TV2100 has been reported to be a clone of the Yuan PG300 and KWorld/VStream XPert DVB-T with cx22702 Signed-off-by: NMichael Krufky <mkrufky@linuxtv.org> Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
由 Michael Krufky 提交于
The flags for mpeg capabilities are sub-optimally named as CX88_BOARD_DVB and CX88_BOARD_BLACKBIRD, which creates some confusion. This patch renames the above to CX88_MPEG_DVB and CX88_MPEG_BLACKBIRD. Signed-off-by: NMichael Krufky <mkrufky@linuxtv.org> Signed-off-by: NTrent Piepho <xyzzy@speakeasy.org> Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
由 Steven Toth 提交于
Some basic cleanup in preperation for a future patch where the cx88-mpeg functions have to deal with the port being used by multiple frontends in (mpeg2 hw encoder and dvb demod). Signed-off-by: NSteven Toth <stoth@hauppauge.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
由 Steven Toth 提交于
A generic change to cards to allow any board to specify whether it needs the wm8775 module loaded (by the core) or not. Signed-off-by: NSteven Toth <stoth@hauppauge.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
- 26 9月, 2006 8 次提交
-
-
由 Michael Krufky 提交于
Signed-off-by: NMichael Krufky <mkrufky@linuxtv.org> Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
由 Michael Krufky 提交于
Add autodetection for PCI subsystem ID 107d:6632, to detect as a Leadtek PVR 2000 Signed-off-by: NMichael Krufky <mkrufky@linuxtv.org> Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
由 Steven Toth 提交于
This is the first in a series of patches to add full WinTV-HVR1300 support to Linux. This first patch will enable analog TV support and DVB-T support. Later patches will add the hardware MPEG encoder support. Signed-off-by: NSteven Toth <stoth@hauppauge.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
由 Chris Pascoe 提交于
If the FX2 does not reset properly during reboot, it can present an invalid USB device ID and fail to attach. Prevent this situation from occuring by resetting the USB part of the card when the PCI part probes. Also fix the GPIO configurations so that analog capture will not inadvertantly reset the USB part. Signed-off-by: NChris Pascoe <c.pascoe@itee.uq.edu.au> Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
由 David Bussenschutt 提交于
Add support for Shenzhen Tungsten Ages Tech TE-DTV-250 OEM for Swann PCI TV Tuner Card Signed-off-by: NDavid Bussenschutt <buzz@oska.com> Signed-off-by: NMichael Krufky <mkrufky@linuxtv.org> Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
由 Peter Naulls 提交于
This patch adds support for Norwood PCI TV Tuner (non-pro) Signed-off-by: NPeter Naulls <peter@chocky.org> Signed-off-by: NMichael Krufky <mkrufky@linuxtv.org> Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
由 Michael Krufky 提交于
This patch adds autodetection support for the AverMedia M150-D blackbird MPEG encoder / analog video capture card. This board is known to work with the ASUS PVR 416 configuration. Signed-off-by: NMichael Krufky <mkrufky@linuxtv.org> Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
由 Eric Thomas 提交于
add initial support for Hauppauge WinTV-HVR3000 TriMode Analog/DVB-S/DVB-T only analog is working for now Signed-off-by: NEric Thomas <ethomas@claranet.fr> Signed-off-by: NMichael Krufky <mkrufky@linuxtv.org> Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
- 01 7月, 2006 1 次提交
-
-
由 Saqeb Akhter 提交于
This patch adds support for the Geniatech Digistar, aka Digiwave 103g DVB-S card. Acked-by: NAndrew de Quincey <adq_dvb@lidskialf.net> Signed-off-by: NSaqeb Akhter <johoja@gmail.com> Signed-off-by: NMichael Krufky <mkrufky@linuxtv.org> Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
- 26 6月, 2006 1 次提交
-
-
由 Adrian Bunk 提交于
remove the following unused hooks: - cx88-blackbird.c: cx88_ioctl_hook() - cx88-blackbird.c: cx88_ioctl_translator() make the following needlessly global functions static: - cx88-tvaudio.c: cx88_detect_nicam() remove the following unused EXPORT_SYMBOL's: - cx88-cards.c: cx88_bcount - cx88-cards.c: cx88_subids - cx88-cards.c: cx88_idcount - cx88-cards.c: cx88_card_list - cx88-cards.c: cx88_card_setup - cx88-core.c: cx88_start_audio_dma - cx88-core.c: cx88_stop_audio_dma - cx88-i2c.c: cx88_i2c_init Signed-off-by: NAdrian Bunk <bunk@stusta.de> Signed-off-by: NMichael Krufky <mkrufky@linuxtv.org> Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
- 25 6月, 2006 1 次提交
-
-
由 Michael Krufky 提交于
Add support for FusionHDTV 3 Gold (original revision), using the card definition for FusionHDTV3 Gold-Q Signed-off-by: NMichael Krufky <mkrufky@linuxtv.org> Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-