- 26 1月, 2008 19 次提交
-
-
由 Steven Toth 提交于
Previous patches assume the tuner was on a different gpio. This patch corrects this. Signed-off-by: NSteven Toth <stoth@hauppauge.com> Signed-off-by: NChaogui Zhang <czhang1974@gmail.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
由 Steven Toth 提交于
IR corrections for the Pinnacle 800i Signed-off-by: NSteven Toth <stoth@hauppauge.com> Signed-off-by: NChaogui Zhang <czhang1974@gmail.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
由 Steven Toth 提交于
Correctly set the atatch structures, enable IR, configure the xc5000 tuner includes. Signed-off-by: NSteven Toth <stoth@hauppauge.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
由 Steven Toth 提交于
xc5000: Small amount of cleanup and commenting, just for clarification. Signed-off-by: NSteven Toth <stoth@hauppauge.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
由 Steven Toth 提交于
From Zhang: This patch continues the support for the Pinnacle HD 800i. Patch committed as-is, cleanups to follow ... Steve Signed-off-by: NChaogui Zhang <czhang1974@gmail.com> Signed-off-by: NSteven Toth <stoth@hauppauge.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
由 Hans Verkuil 提交于
Signed-off-by: NHans Verkuil <hverkuil@xs4all.nl> Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
由 Michael Krufky 提交于
Prevent us from wasting some extra bytes of memory Thanks to Trent Piepho, for pointing this out. Signed-off-by: NMichael Krufky <mkrufky@linuxtv.org> Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
由 Mauro Carvalho Chehab 提交于
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
由 Frej Drejhammar 提交于
The auto selection of pertinent helper chips (VIDEO_HELPER_CHIPS_AUTO) should select the wm8775 driver, which is used by at least one Conexant 2388x based card (Hauppauge HVR-1300), if VIDEO_CX88 is selected. Signed-off-by: NFrej Drejhammar <frej.drejhammar@gmail.com> Signed-off-by: NRicardo Cerqueira <v4l@cerqueira.org> Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
由 Ricardo Cerqueira 提交于
All cx2388 boards need the line-in audio to be routed from an external ADC (refered to as "ADC mode" in the spec sheet), since the chip is uncapable of dealing with baseband audio directly. So... this patch enables normal mode when using the tuner (TV or Radio), and enables ADC mode with any other source. It'll probably only work with boards that have supported ADCs (such as the Wolfson wm9775) Signed-off-by: NRicardo Cerqueira <v4l@cerqueira.org> Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
由 Michael Krufky 提交于
We should not mute the audio input when we stop the codec, because it will interfere with the live uncompressed stream. Signed-off-by: NMichael Krufky <mkrufky@linuxtv.org> Reviewed-by: NJelle Foks <jelle@foks.8m.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
由 Ricardo Cerqueira 提交于
Fix lack of audio on the MPEG-2 stream of wm8775 based blackbirds. The wm8775 module initializes the audio input at "route 2", which doesn't hold true for all boards. The HVR-1300, for example, uses route 1 for tuner audio, and route 2 for baseband. So we must route the audio to the proper input depending on what video input is being used. Signed-off-by: NRicardo Cerqueira <v4l@cerqueira.org> Signed-off-by: NMichael Krufky <mkrufky@linuxtv.org> Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
由 Jelle Foks 提交于
Remove the unnecessary BLACKBIRD_UNMUTE calls to the mpeg encoder in cx88-blackbird.c The encoder is never muted, hence unmuting should then only be necessary once after hardware initialization. I tested this from warm boots and cold boots (with long power down time to ensure the sram in the chip is emptied), and found that after the firmware upload the encoder is apparently not muted, making the unmutes unnecessary. Signed-off-by: NJelle Foks <jelle@foks.8m.com> Signed-off-by: NMichael Krufky <mkrufky@linuxtv.org> Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
由 Jelle Foks 提交于
Remove the unnecessary msleep()'s in cx88-blackbird.c Signed-off-by: NJelle Foks <jelle@foks.8m.com> Signed-off-by: NMichael Krufky <mkrufky@linuxtv.org> Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
由 Jelle Foks 提交于
This patch should fix the 'muted audio' and 'raspy audio' problem for mpeg2 streams out of cx88-blackbird devices. Especially mythtv users would find that the audio would often sound bad (aliased, or 'raspy'), mainly related to channel changes, many (all?) other users would find that there was no audio at all in the mpeg data from the encoder chip, unless the audio was manually unmuted. The patch includes the following modifications: Don't actually start the mpeg2 encoder until the device is read from by the application. Wait until the audio is stable for at least 400ms before starting the mpeg encoder. Mute/Unmute the audio when starting/stopping the mpeg encoder. Stop the mpeg encoder when changing parameters and when changing tuner frequency. Add a variable 'mpeg_active' to struct cx8802_dev to allow tracking of whether or not the mpeg2 encoder is active. Load the firmware on cx88-blackbird driver load. Signed-off-by: NJelle Foks <jelle@foks.8m.com> Signed-off-by: NMichael Krufky <mkrufky@linuxtv.org> Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
由 Brandon Philips 提交于
s/STATE_NEEDS_INIT/VIDEOBUF_NEEDS_INIT/g s/STATE_PREPARED/VIDEOBUF_PREPARED/g s/STATE_QUEUED/VIDEOBUF_QUEUED/g s/STATE_ACTIVE/VIDEOBUF_ACTIVE/g s/STATE_DONE/VIDEOBUF_DONE/g s/STATE_ERROR/VIDEOBUF_ERROR/g s/STATE_IDLE/VIDEOBUF_IDLE/g Signed-off-by: NBrandon Philips <bphilips@suse.de> Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
由 Adrian Bunk 提交于
This patch makes the following needlessly global functions static: - cx8802_init_common() - cx8802_fini_common() - cx8802_suspend_common() - cx8802_resume_common() Signed-off-by: NAdrian Bunk <bunk@kernel.org> Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
由 Mauro Carvalho Chehab 提交于
This board has some special tea5767 configuration. Basically, radio XTAL uses a different frequency than the other supported radios. It uses a 13 MHz XTAL. This patch adds the proper radio gpio and tea5767 configurations for the board. Also, with PAL/BG, the board requires some special init for tda9887: port1=0 port2=0 qss=1 Thanks to Serge Kolotylo and MIDImaster for their help on identifying the proper needs for this driver. Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
由 Mauro Carvalho Chehab 提交于
Currently, the only tuner-specific device that allows special configurations is tda9887. However, tea5767 also may require some special configurations (for example, to specify a different Xtal freq). This patch replaces TDA9887_SET_CONFIG by a more generic internal ioctl (TUNER_SET_CONFIG). The newer one allows specifying what tuner is appliable to a configuration set, and allows an arbitrary configuration struct. Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
- 12 12月, 2007 1 次提交
-
-
由 Brandon Philips 提交于
Drivers were using cookie cutter code for stopping the read/stream. Use the new videobuf_stop function which is lock safe. Signed-off-by: NBrandon Philips <bphilips@suse.de> Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
- 05 11月, 2007 1 次提交
-
-
由 Randy Dunlap 提交于
All of these drivers select VIDEO_IR, which uses the input subsystem, so they should also depend on INPUT. Problem examples: drivers/built-in.o: In function `ir_input_key_event': ir-functions.c:(.text+0x10849a): undefined reference to `input_event' ir-functions.c:(.text+0x1084ac): undefined reference to `input_event' drivers/built-in.o: In function `saa7134_set_i2c_ir': (.text+0x11cc0a): undefined reference to `get_key_pinnacle_color' drivers/built-in.o: In function `saa7134_set_i2c_ir': (.text+0x11cc4f): undefined reference to `get_key_pinnacle_grey' drivers/built-in.o: In function `saa7134_input_fini': (.text+0x11cd8b): undefined reference to `input_unregister_device' drivers/built-in.o: In function `saa7134_input_init1': (.text+0x11d1fa): undefined reference to `input_allocate_device' drivers/built-in.o: In function `saa7134_input_init1': (.text+0x11d317): undefined reference to `input_register_device' drivers/built-in.o: In function `saa7134_input_init1': (.text+0x11d6ca): undefined reference to `input_free_device' drivers/built-in.o: In function `saa7134_set_i2c_ir': (.text+0x11c3f3): undefined reference to `ir_codes_hauppauge_new' drivers/built-in.o: In function `saa7134_set_i2c_ir': (.text+0x11c450): undefined reference to `ir_codes_pinnacle_color' drivers/built-in.o: In function `saa7134_set_i2c_ir': (.text+0x11c480): undefined reference to `ir_codes_purpletv' drivers/built-in.o: In function `saa7134_set_i2c_ir': (.text+0x11c495): undefined reference to `ir_codes_pinnacle_grey' drivers/built-in.o: In function `saa7134_ir_start': (.text+0x11c622): undefined reference to `ir_rc5_timer_end' drivers/built-in.o: In function `saa7134_ir_start': (.text+0x11c637): undefined reference to `ir_rc5_timer_keyup' drivers/built-in.o: In function `build_key': saa7134-input.c:(.text+0x11c769): undefined reference to `ir_extract_bits' saa7134-input.c:(.text+0x11c7ad): undefined reference to `ir_input_keydown' saa7134-input.c:(.text+0x11c7f0): undefined reference to `ir_input_keydown' saa7134-input.c:(.text+0x11c7f9): undefined reference to `ir_input_nokey' saa7134-input.c:(.text+0x11c806): undefined reference to `ir_input_nokey' drivers/built-in.o: In function `saa7134_input_init1': (.text+0x11ca07): undefined reference to `ir_codes_encore_enltv' drivers/built-in.o: In function `saa7134_input_init1': (.text+0x11caf6): undefined reference to `ir_input_init' drivers/built-in.o: In function `saa7134_input_init1': (.text+0x11cbf2): undefined reference to `ir_codes_avermedia' drivers/built-in.o: In function `saa7134_input_init1': (.text+0x11cc24): undefined reference to `ir_codes_pctv_sedna' drivers/built-in.o: In function `saa7134_input_init1': (.text+0x11cc53): undefined reference to `ir_codes_flydvb' drivers/built-in.o: In function `saa7134_input_init1': (.text+0x11cc85): undefined reference to `ir_codes_videomate_tv_pvr' drivers/built-in.o: In function `saa7134_input_init1': (.text+0x11ccb7): undefined reference to `ir_codes_pixelview' drivers/built-in.o: In function `saa7134_input_init1': (.text+0x11cce9): undefined reference to `ir_codes_eztv' drivers/built-in.o: In function `saa7134_input_init1': (.text+0x11cd1b): undefined reference to `ir_codes_manli' drivers/built-in.o: In function `saa7134_input_init1': (.text+0x11cda8): undefined reference to `ir_codes_cinergy' drivers/built-in.o: In function `saa7134_input_init1': (.text+0x11cdd7): undefined reference to `ir_codes_flyvideo' drivers/built-in.o: In function `saa7134_input_init1': (.text+0x11ce06): undefined reference to `ir_codes_asus_pc39' drivers/built-in.o: In function `saa7134_input_init1': (.text+0x11ce7d): undefined reference to `ir_codes_gotview7135' drivers/built-in.o: In function `saa7134_input_init1': (.text+0x11cee1): undefined reference to `ir_codes_proteus_2309' Signed-off-by: NRandy Dunlap <randy.dunlap@oracle.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
- 22 10月, 2007 9 次提交
-
-
由 Trent Piepho 提交于
When a cx8802 sub-driver was unregistered, the struct cx8802_driver, which was kmalloc()ed by cx8802_register_driver(), was deleted from the list of drivers, but never freed. Signed-off-by: NTrent Piepho <xyzzy@speakeasy.org> Reviewed-by: NMichael Krufky <mkrufky@linuxtv.org> Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
由 Trent Piepho 提交于
Less code and more efficient. Got ride of a variable that counted the number of devices in cx8802_unregister_driver() but was never used. Looked leftover from a cut&paste. Signed-off-by: NTrent Piepho <xyzzy@speakeasy.org> Reviewed-by: NMichael Krufky <mkrufky@linuxtv.org> Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
由 Trent Piepho 提交于
It was a struct cx8802_driver for no apparent reason. Nothing uses a cx8802_driver in the cx8802_dev struct. The only field that was used was devlist, a list_head. The code in cx8802_remove() that removed any loaded sub-drivers was broken. It would delete the current list entry, but didn't use list_for_each_safe. It also called list_del() on the list _head_ inside the list_for_each loop? It would crash if it was run, which I don't think can ever happen. Since the cx8802 sub-drivers use the cx8802 driver, they have to be unloaded first. So there isn't any way for a sub-driver to still be loaded when cx8802_remove() is called... Except maybe with PCI hot-plug, if one removes the PCI card while the drivers are loaded? So I left some code in to handle that if it's actually possible. It will remove the sub-drivers from the device cx8802_remove() was called on, and only that device. If one has two DVB cards and unplugs one, there is no reason to unload the DVB drivers for both cards. I have no way to test this, but it can't be worse than what was there before. cx8802_get_driver() is passed a cx8802_dev pointer and looks for the requested driver on that device. It first loops over the cx8802 device list looking for the device it was passed, which is pointless. It doesn't need to find the device pointer in the list, as it already has the pointer. The list_head in the cx8802_driver struct, which joins all the _drivers_ attached to a device, was named devlist. Changed that to drvlist, since the devlist is used for a list of _devices_ in other cx8802 structs. Signed-off-by: NTrent Piepho <xyzzy@speakeasy.org> Reviewed-by: NMichael Krufky <mkrufky@linuxtv.org> Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
由 Trent Piepho 提交于
card_priv was only used to store a pointer to the vp3054 state struct. There's no need to use a void * since it doesn't have multiple types. Make the field conditional on VP3045 support. It was already conditional on DVB support, but it's only used if VP3045 support is on, so that makes for a better option to check. Signed-off-by: NTrent Piepho <xyzzy@speakeasy.org> Reviewed-by: NMichael Krufky <mkrufky@linuxtv.org> Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
由 Trent Piepho 提交于
Add some ifdefs around fields only used for blackbird support, similar to the way the dvb fields are only included with dvb support. Signed-off-by: NTrent Piepho <xyzzy@speakeasy.org> Reviewed-by: NMichael Krufky <mkrufky@linuxtv.org> Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
由 Hans Verkuil 提交于
Remove the obsolete VIDIOC_G_MPEGCOMP and VIDIOC_S_MPEGCOMP ioctls from the V4L2 API as per the removal schedule (October 2007). Signed-off-by: NHans Verkuil <hverkuil@xs4all.nl> Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
由 Mauro Carvalho Chehab 提交于
struct video_device used to define a .hardware field. While initialized on severl drivers, this field is never used inside V4L. However, drivers using it need to include the old V4L1 header. This seems to cause compilation troubles with some random configs. Better just to remove it from all drivers. Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
由 Trent Piepho 提交于
Lets mixer apps display a dB range for the volume control. Signed-off-by: NTrent Piepho <xyzzy@speakeasy.org> Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
由 Trent Piepho 提交于
Add two mute controls. One mutes everything, the other just mutes the analog pass-through output. Rename the existing volume control. The controls are now: Playback Volume Playback Switch Capture Switch These names might seem odd, but I believe they are more correct. The previous "Capture Volume" control didn't actually effect the volume of the captured audio. Instead it controls the volume of the analog pass-thought output. It appears that pass-through controls like this are usually considered to be in the playback direction, not capture. For example, "CAPTURE feedback Playback Volume" is the name used for a control that appears to have the same effect in the ca0106 driver. We only have one volume control, so we can omit the "CAPTURE feedback" part. If someone where to add PCM playback support to the driver, then this would be the volume control. Signed-off-by: NTrent Piepho <xyzzy@speakeasy.org> Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
- 16 10月, 2007 1 次提交
-
-
由 Jaroslav Kysela 提交于
Signed-off-by: NJaroslav Kysela <perex@perex.cz>
-
- 11 10月, 2007 1 次提交
-
-
由 Trent Piepho 提交于
Signed-off-by: NTrent Piepho <xyzzy@speakeasy.org> Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
- 10 10月, 2007 8 次提交
-
-
由 Trent Piepho 提交于
CONFIG_VIDEO_BUF_DVB became CONFIG_VIDEOBUF_DVB. But in these cases, it makes more sense to use CONFIG_VIDEO_SAA7134_DVB or CONFIG_VIDEO_CX88_DVB_MODULE depending on the driver. The reference in cx23885.h should just be removed, as the code there needs to be included if DVB is on or off. I do not think you can even compile the cx23885 driver without DVB. It's clearly just leftover from when the file was obvious copied from the cx88 driver (which is not mentioned in the copyright BTW). Signed-off-by: NTrent Piepho <xyzzy@speakeasy.org> Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
由 Mauro Carvalho Chehab 提交于
Thanks to Michael Krufky for pointing this to me. Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
由 Mauro Carvalho Chehab 提交于
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
由 Mauro Carvalho Chehab 提交于
PCI-dependent videobuf_foo methods were renamed as videobuf_pci_foo. Also, videobuf_dmabuf is now part of videobuf-dma-sg private struct. So, to access it, a subroutine call is needed. This patch renames all occurences of those function calls to be consistent with the video-buf split. Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org> http://thread.gmane.org/gmane.comp.video.video4linux/34978/focus=34981Reviewed-by: NRicardo Cerqueira <v4l@cerqueira.org>
-
由 Mauro Carvalho Chehab 提交于
IR workqueue should be disabled during suspend. This avoids some troubles, like the one reported on bug #8689: "The Hauppauge HVR 1100 ir-remote control does not work after resume from suspend to ram or disk." This patch disables IR before suspending, re-enabling it after resume. Thanks to Peter Poklop <Peter.Poklop@gmx.at> for reporting it and helping with the fix. Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org> Reviewed-by: NPeter Poklop <Peter.Poklop@gmx.at>
-
由 Trent Piepho 提交于
Not sure why they are there, but they don't do anything now. Signed-off-by: NTrent Piepho <xyzzy@speakeasy.org> Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
由 Trent Piepho 提交于
Use the balance control to make the mono volume control stereo. Note that full range isn't supported. The balance control attenuates one channel by 0 to -63 dB, and the volume control provides additional attenuation to both channels by another 0 to -63 dB. So the channel with the most attenuation has a range of 0 to -126 dB, while the other channel only has a range of 0 to -63 dB. ALSA volume controls don't appear to support this concept. I just limited the range to 0 to -63 total. Once you get to -63 dB, you're already at silence, so additional attenuation is pretty much pointless anyway. Signed-off-by: NTrent Piepho <xyzzy@speakeasy.org> Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
由 Michael Krufky 提交于
Auto-load ir-kbd-i2c for ir receiver support, and rtc-isl1208 for rtc support for the FusionHDTV5 RT Gold. Signed-off-by: NMichael Krufky <mkrufky@linuxtv.org> Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-