HDA Codec driver,HDA generic driver
Renamed pci_vendor/pci_device fields to pci_subvendor/pci_subdevice.
They are really PCI subsystem IDs.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Documentation,HDA Intel driver
Added the support of VIA VT8251/VT8237A HD-Audio controllers.
They are (almost) compatible with Intel ICH6/7.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Documentation,HDA Intel driver
This patch changes the Intel HD Audio device driver to include
the support of HD Audio device embedded in ATI south bridge
IXP450. Because the design of ATI chipset follows intel HD Audio
specification 1.0, the programming method is the same as that
of intel HD Audio device exception one minor change which requires
to enable snoop for DMA transport. There are 3 changes that have been
made to hda_intel.c file.
  1. Added device ID for ATI HD Audio device;
  2. Increase maximum CODEC supported to 4;
  3. Enable snoop during the driver initialization.
Signed-off-by: NFrederick Li <fli@ati.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

HDA Codec driver
Added 'test' model for testing/debugging the devices with ALC880 codec.
This model is built only when CONFIG_SND_DEBUG is set.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Documentation,HDA Codec driver
Added the ASUS Z71V (or similar) laptop support.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Documentation,HDA Intel driver
Added position_fix module option to HDA-intel driver for fixing up
the DMA position (possibly hardware-) bugs.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Maestro3 driver
Some HP OmniBook laptops (500 and 6000 at least) require some GPIO magic
before the HW volume buttons work. This patch makes them work mostly.
Something is still missing to make them work perfectly. However I have been
unable to figure out what exactly.
Signed-off-by: NVille Syrjala <syrjala@sci.fi>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Maestro3 driver
Add support for hardware volume buttons.
Signed-off-by: NVille Syrjala <syrjala@sci.fi>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Maestro3 driver
Due to a typo interrupts were never actually acked or disabled.
Signed-off-by: NVille Syrjala <syrjala@sci.fi>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

ARM,/arm/Makefile,ARM AACI PL041 driver
Add support for the ARM AACI Primecell, which provides an AC'97
based interface.  This driver only provides playback support.

This has been extensively tested with an LM4549 AC'97 codec.
Signed-off-by: NRussell King <rmk@arm.linux.org.uk>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

ARM DMA routines
The patch below adds a convenient re-usable shim around the extended
ARM DMA API, and is used by several ARM ALSA drivers.
Signed-off-by: NRussell King <rmk@arm.linux.org.uk>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

EMU10K1/EMU10K2 driver
The following patch adds SB0060 to emu_chip_details.
Signed-off-by: NMikael Magnusson <mikaelmagnusson@glocalnet.net>
Signed-off-by: NJaroslav Kysela <perex@suse.cz>

USB generic driver
Bind the device files to the (first) audio control interface instead of
the entire USB device.
Signed-off-by: NClemens Ladisch <clemens@ladisch.de>

AC97 Codec
The code for AD1980/AD1985/AD1986 codecs forgot to enable the code to
switch the jack sharing bits on AD1888-compatible codecs.
Signed-off-by: NClemens Ladisch <clemens@ladisch.de>

AC97 Codec
The code for modifying the center/LFE disable bit on AD1888 codecs
accidentally toggled the mute split bit instead.
Signed-off-by: NClemens Ladisch <clemens@ladisch.de>

USB generic driver
This patch adds a proc file for the SB Audigy 2 NX which shows the
connection status of the various jacks.  Unfortunately, no SPDIF input
frequency (yet).
Signed-off-by: NClemens Ladisch <clemens@ladisch.de>

USB generic driver
The ioctls for LIRC compatibility can be removed because the
infrastructure and detection stuff is better done in user space.
Signed-off-by: NClemens Ladisch <clemens@ladisch.de>

USB generic driver
The SB Audigy 2 NX needs a special boot-up command before it works in
high speed mode.

However, we don't actually enable it yet because high speed
synchronization doesn't seem to work with this device.
Signed-off-by: NClemens Ladisch <clemens@ladisch.de>

USB
Signed-off-by: NJames Courtier-Dutton <James@superbug.co.uk>

CS4281 driver
Reset the FPDN bit of the EPPMC register if needed.
Signed-off-by: NArnaud Patard <arnaud.patard@rtp-net.org>
Signed-off-by: NJaroslav Kysela <perex@suse.cz>

EMU10K1/EMU10K2 driver
Signed-off-by: NJames Courtier-Dutton <James@superbug.co.uk>

EMU10K1/EMU10K2 driver
e.g. When HD Capture source is set to SPDIF,
     setting HD Capture channel to 0 captures from CDROM digital input.
     setting HD Capture channel to 1 captures from SPDIF in.
Signed-off-by: NJames Courtier-Dutton <James@superbug.co.uk>

EMU10K1/EMU10K2 driver
The capture rate does in fact vary, but it only captures anything if
the HD Capture source is set to I2S or AC97. I have not tested if the sound
is actually captured from an physical input of some type or not.
TODO: Get SPDIF capture working.
Signed-off-by: NJames Courtier-Dutton <James@superbug.co.uk>

EMU10K1/EMU10K2 driver
Signed-off-by: NJames Courtier-Dutton <James@superbug.co.uk>

USB generic driver
The SB Audigy 2 NX does not advertise the sample rate attribute in its
endpoint descriptors although it supports it.
Signed-off-by: NClemens Ladisch <clemens@ladisch.de>

USB generic driver
Adds mixer controls for the CMSS/Dolby Digital/Power LEDs
on the SB Audigy 2 NX.
Signed-off-by: NClemens Ladisch <clemens@ladisch.de>

USB generic driver
Add ioctls to the Sound Blaster remote control hwdep device so that it
can be used with LIRC.
Signed-off-by: NClemens Ladisch <clemens@ladisch.de>

USB generic driver
Do not use more than one packet in synchronization feedback URBs because
it would be pointless to send or receive more than one value at the same
time.
Signed-off-by: NClemens Ladisch <clemens@ladisch.de>

USB generic driver
Add sanity checks when reading the bRefresh value, and actually use it
for the synchronization packets instead of polling at 1000 Hz.
Signed-off-by: NClemens Ladisch <clemens@ladisch.de>

USB generic driver
Extension units can have type 0, so do not ignore them when constructing
mixer controls.
Signed-off-by: NClemens Ladisch <clemens@ladisch.de>

USB generic driver
Cache the decoded values of idVendor/idProduct to get rid of most of
those ugly le16_to_cpu() calls.
Signed-off-by: NClemens Ladisch <clemens@ladisch.de>

ALSA Core,USB generic driver
Add an hwdep interface that supports reading remote control data from
Sound Blaster Extigy and Audigy 2 NX devices.
Signed-off-by: NClemens Ladisch <clemens@ladisch.de>

USB generic driver
Add support for the optional status interrupt endpoint in audio control
interfaces, and translate USB status notifications into ALSA mixer
control notifications.
Signed-off-by: NClemens Ladisch <clemens@ladisch.de>

USB generic driver
Move all data related to audio control interfaces into a separate struct
local to usbmixer.c.
Signed-off-by: NClemens Ladisch <clemens@ladisch.de>

USB generic driver
Unit/terminal IDs are 8-bit integers, so the unitbitmap
variable does not need to be bigger than 256 bits.
Signed-off-by: NClemens Ladisch <clemens@ladisch.de>

USB generic driver
On the SB Audigy 2 NX, frequency feedback doesn't quite work
when playing at 44.1 kHz, so temporarily disable this frequency.
Signed-off-by: NClemens Ladisch <clemens@ladisch.de>

ALSA Version
1.0.9rc3
Signed-off-by: NJaroslav Kysela <perex@suse.cz>

RME HDSP driver
ppc firmware upload fix
Signed-off-by: NThomas Charbonnel <thomas@undata.org>
Signed-off-by: NJaroslav Kysela <perex@suse.cz>

AC97 Codec
Add the 'Mic Front Input Switch' control to the mixer for ALC850.
Enabling this input is required for using the front panel microphone
connector with ASUS A8V motherboard.
Signed-off-by: NSergey Vlasov <vsu@altlinux.ru>
Signed-off-by: NJaroslav Kysela <perex@suse.cz>

AC97 Codec
ac97_enum mixer elements (e.g., 'Capture Source') did not work because
of wrong bitmask calculation in snd_ac97_get_enum_double() and
snd_ac97_put_enum_double().

https://bugtrack.alsa-project.org/alsa-bug/view.php?id=1072Signed-off-by: NSergey Vlasov <vsu@altlinux.ru>
Signed-off-by: NJaroslav Kysela <perex@suse.cz>