提交 dfc0ff62 编写于 作者: T Takashi Iwai 提交者: Jaroslav Kysela

[ALSA] Add ASUS Z71V support

Documentation,HDA Codec driver
Added the ASUS Z71V (or similar) laptop support.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>
上级 c74db86b
......@@ -636,6 +636,7 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed.
5stack 5-jack in back, 2-jack in front
5stack-digout 5-jack in back, 2-jack in front, a SPDIF out
w810 3-jack
z71v 3-jack (HP shared SPDIF)
CMI9880
minimal 3-jack in back
......
......@@ -39,6 +39,7 @@ enum {
ALC880_5ST,
ALC880_5ST_DIG,
ALC880_W810,
ALC880_Z71V,
};
struct alc_spec {
......@@ -90,6 +91,11 @@ static hda_nid_t alc880_w810_dac_nids[3] = {
0x02, 0x03, 0x04
};
static hda_nid_t alc880_z71v_dac_nids[1] = {
/* front only? */
0x02
};
static hda_nid_t alc880_adc_nids[3] = {
/* ADC0-2 */
0x07, 0x08, 0x09,
......@@ -284,6 +290,10 @@ static struct alc_channel_mode alc880_w810_modes[1] = {
{ 6, NULL }
};
static struct alc_channel_mode alc880_z71v_modes[1] = {
{ 2, NULL }
};
/*
*/
static int alc880_ch_mode_info(snd_kcontrol_t *kcontrol, snd_ctl_elem_info_t *uinfo)
......@@ -475,6 +485,35 @@ static snd_kcontrol_new_t alc880_w810_base_mixer[] = {
{ } /* end */
};
static snd_kcontrol_new_t alc880_z71v_mixer[] = {
HDA_CODEC_VOLUME("Front Playback Volume", 0x0c, 0x0, HDA_OUTPUT),
HDA_CODEC_MUTE("Front Playback Switch", 0x14, 0x0, HDA_OUTPUT),
HDA_CODEC_VOLUME("Headphone Playback Volume", 0x0d, 0x0, HDA_OUTPUT),
HDA_CODEC_MUTE("Headphone Playback Switch", 0x15, 0x0, HDA_OUTPUT),
HDA_CODEC_VOLUME("CD Playback Volume", 0x0b, 0x04, HDA_INPUT),
HDA_CODEC_MUTE("CD Playback Switch", 0x0b, 0x04, HDA_INPUT),
HDA_CODEC_VOLUME("Mic Playback Volume", 0x0b, 0x0, HDA_INPUT),
HDA_CODEC_MUTE("Mic Playback Switch", 0x0b, 0x0, HDA_INPUT),
HDA_CODEC_VOLUME("Capture Volume", 0x07, 0x0, HDA_INPUT),
HDA_CODEC_MUTE("Capture Switch", 0x07, 0x0, HDA_INPUT),
HDA_CODEC_VOLUME_IDX("Capture Volume", 1, 0x08, 0x0, HDA_INPUT),
HDA_CODEC_MUTE_IDX("Capture Switch", 1, 0x08, 0x0, HDA_INPUT),
{
.iface = SNDRV_CTL_ELEM_IFACE_MIXER,
/* The multiple "Capture Source" controls confuse alsamixer
* So call somewhat different..
* FIXME: the controls appear in the "playback" view!
*/
/* .name = "Capture Source", */
.name = "Input Source",
.count = 2,
.info = alc_mux_enum_info,
.get = alc_mux_enum_get,
.put = alc_mux_enum_put,
},
{ } /* end */
};
/*
*/
static int alc_build_controls(struct hda_codec *codec)
......@@ -719,6 +758,58 @@ static struct hda_verb alc880_w810_init_verbs[] = {
{ }
};
static struct hda_verb alc880_z71v_init_verbs[] = {
/* front channel selector/amp: input 0: DAC: unmuted, (no volume selection) */
{0x0c, AC_VERB_SET_AMP_GAIN_MUTE, 0x7000},
/* front channel selector/amp: input 1: capture mix: muted, (no volume selection) */
{0x0c, AC_VERB_SET_AMP_GAIN_MUTE, 0x7180},
/* front channel selector/amp: output 0: unmuted, max volume */
{0x0c, AC_VERB_SET_AMP_GAIN_MUTE, 0xb000},
/* front out pin: muted, (no volume selection) */
{0x14, AC_VERB_SET_AMP_GAIN_MUTE, 0xb080},
/* front out pin: NOT headphone enable, out enable, vref disabled */
{0x14, AC_VERB_SET_PIN_WIDGET_CONTROL, 0x40},
/* headphone channel selector/amp: input 0: DAC: unmuted, (no volume selection) */
{0x0d, AC_VERB_SET_AMP_GAIN_MUTE, 0x7000},
/* headphone channel selector/amp: input 1: capture mix: muted, (no volume selection) */
{0x0d, AC_VERB_SET_AMP_GAIN_MUTE, 0x7180},
/* headphone channel selector/amp: output 0: unmuted, max volume */
{0x0d, AC_VERB_SET_AMP_GAIN_MUTE, 0xb000},
/* headphone out pin: muted, (no volume selection) */
{0x15, AC_VERB_SET_AMP_GAIN_MUTE, 0xb080},
/* headpohne out pin: headphone enable, out enable, vref disabled */
{0x15, AC_VERB_SET_PIN_WIDGET_CONTROL, 0xc0},
/* Line In pin widget for input */
{0x1a, AC_VERB_SET_PIN_WIDGET_CONTROL, 0x20},
/* CD pin widget for input */
{0x1c, AC_VERB_SET_PIN_WIDGET_CONTROL, 0x20},
/* Mic1 (rear panel) pin widget for input and vref at 80% */
{0x18, AC_VERB_SET_PIN_WIDGET_CONTROL, 0x24},
/* Mic2 (front panel) pin widget for input and vref at 80% */
{0x1b, AC_VERB_SET_PIN_WIDGET_CONTROL, 0x24},
/* unmute amp left and right */
{0x07, AC_VERB_SET_AMP_GAIN_MUTE, 0x7000},
/* set connection select to line in (default select for this ADC) */
{0x07, AC_VERB_SET_CONNECT_SEL, 0x02},
/* Unmute input amps (CD, Line In, Mic 1 & Mic 2) for mixer
* widget(nid=0x0B) to support the input path of analog loopback
*/
/* Note: PASD motherboards uses the Line In 2 as the input for front panel mic (mic 2) */
/* Amp Indexes: CD = 0x04, Line In 1 = 0x02, Mic 1 = 0x00 & Line In 2 = 0x03*/
/* unmute CD */
{0x0b, AC_VERB_SET_AMP_GAIN_MUTE, (0x7000 | (0x04 << 8))},
/* unmute Line In */
{0x0b, AC_VERB_SET_AMP_GAIN_MUTE, (0x7000 | (0x02 << 8))},
/* unmute Mic 1 */
{0x0b, AC_VERB_SET_AMP_GAIN_MUTE, (0x7000 | (0x00 << 8))},
/* unmute Line In 2 (for PASD boards Mic 2) */
{0x0b, AC_VERB_SET_AMP_GAIN_MUTE, (0x7000 | (0x03 << 8))},
{ }
};
static int alc_init(struct hda_codec *codec)
{
struct alc_spec *spec = codec->spec;
......@@ -993,6 +1084,9 @@ static struct hda_board_config alc880_cfg_tbl[] = {
{ .modelname = "w810", .config = ALC880_W810 },
{ .pci_vendor = 0x161f, .pci_device = 0x203d, .config = ALC880_W810 },
{ .modelname = "z71v", .config = ALC880_Z71V },
{ .pci_vendor = 0x1043, .pci_device = 0x1964, .config = ALC880_Z71V },
{}
};
......@@ -1023,6 +1117,10 @@ static int patch_alc880(struct hda_codec *codec)
spec->mixers[spec->num_mixers] = alc880_five_stack_mixer;
spec->num_mixers++;
break;
case ALC880_Z71V:
spec->mixers[spec->num_mixers] = alc880_z71v_mixer;
spec->num_mixers++;
break;
default:
spec->mixers[spec->num_mixers] = alc880_base_mixer;
spec->num_mixers++;
......@@ -1033,6 +1131,7 @@ static int patch_alc880(struct hda_codec *codec)
case ALC880_3ST_DIG:
case ALC880_5ST_DIG:
case ALC880_W810:
case ALC880_Z71V:
spec->multiout.dig_out_nid = ALC880_DIGOUT_NID;
break;
default:
......@@ -1063,6 +1162,11 @@ static int patch_alc880(struct hda_codec *codec)
spec->channel_mode = alc880_w810_modes;
spec->num_channel_mode = ARRAY_SIZE(alc880_w810_modes);
break;
case ALC880_Z71V:
spec->init_verbs = alc880_z71v_init_verbs;
spec->channel_mode = alc880_z71v_modes;
spec->num_channel_mode = ARRAY_SIZE(alc880_z71v_modes);
break;
default:
spec->init_verbs = alc880_init_verbs_three_stack;
spec->channel_mode = alc880_threestack_modes;
......@@ -1086,6 +1190,11 @@ static int patch_alc880(struct hda_codec *codec)
spec->multiout.dac_nids = alc880_w810_dac_nids;
// No dedicated headphone socket - it's shared with built-in speakers.
break;
case ALC880_Z71V:
spec->multiout.num_dacs = ARRAY_SIZE(alc880_z71v_dac_nids);
spec->multiout.dac_nids = alc880_z71v_dac_nids;
spec->multiout.hp_nid = 0x03;
break;
default:
spec->multiout.num_dacs = ARRAY_SIZE(alc880_dac_nids);
spec->multiout.dac_nids = alc880_dac_nids;
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册