- 14 10月, 2018 10 次提交
-
-
由 Arnd Bergmann 提交于
A couple of macros that deal with statistics in ath9k rely on the declaration of the 'sc' variable, which they dereference. However, when the statistics are disabled, the new instance in ath_cmn_process_fft() causes a warning for an unused variable: drivers/net/wireless/ath/ath9k/common-spectral.c: In function 'ath_cmn_process_fft': drivers/net/wireless/ath/ath9k/common-spectral.c:474:20: error: unused variable 'sc' [-Werror=unused-variable] It's better if those macros only operate on their arguments instead of known variable names, and adding a cast to (void) kills off that warning. Fixes: 03224678 ("ath9k: add counters for good and errorneous FFT/spectral frames") Signed-off-by: NArnd Bergmann <arnd@arndb.de> Signed-off-by: NKalle Valo <kvalo@codeaurora.org>
-
由 Dan Carpenter 提交于
We added an unnecessary condition here in commit a904417f ("ath10k: add extended per sta tx statistics support"). "legacy_rate_idx" is a u8 so it can't be negative. The caller doesn't pass negatives either. I have deleted this code. Signed-off-by: NDan Carpenter <dan.carpenter@oracle.com> Signed-off-by: NKalle Valo <kvalo@codeaurora.org>
-
由 Carl Huang 提交于
ath10k_pci_diag_write_mem may allocate big size of the dma memory based on the parameter nbytes. Take firmware diag download as example, the biggest size is about 500K. In some systems, the allocation is likely to fail because it can't acquire such a large contiguous dma memory. The fix is to allocate a small size dma memory. In the loop, driver copies the data to the allocated dma memory and writes to the destination until all the data is written. Tested with QCA6174 PCI with firmware-6.bin_WLAN.RM.4.4.1-00119-QCARMSWP-1, this also affects QCA9377 PCI. Signed-off-by: NCarl Huang <cjhuang@codeaurora.org> Reviewed-by: NBrian Norris <briannorris@chomium.org> Signed-off-by: NKalle Valo <kvalo@codeaurora.org>
-
由 Wen Gong 提交于
In the noisy environment, if there are packets in the queue and can't send out, the suspend timing will be more than 5 seconds due to the wait, flush the queue to optimize the suspend timing, and let the upper layer to retry the packets after resume. Tested with QCA6174 PCI with firmware WLAN.RM.4.4.1-00109-QCARMSWPZ-1, but this will also affect QCA9377 PCI. It's not a regression with new firmware releases. Signed-off-by: NWen Gong <wgong@codeaurora.org> Signed-off-by: NKalle Valo <kvalo@codeaurora.org>
-
由 Gustavo A. R. Silva 提交于
There is no need to compare *ps_state_enable* with < 0 because such variable is of type u8 (8 bits, unsigned), making it impossible to hold a negative value. Fix this by removing such comparison. Addresses-Coverity-ID: 1473921 ("Unsigned compared against 0") Signed-off-by: NGustavo A. R. Silva <gustavo@embeddedor.com> Signed-off-by: NKalle Valo <kvalo@codeaurora.org>
-
由 Gustavo A. R. Silva 提交于
Currently, the error handling for the call to function ath10k_get_legacy_rate_idx() doesn't work because *rate_idx* is of type u8 (8 bits, unsigned), which makes it impossible for it to hold a value less than 0. Fix this by changing the type of variable *rate_idx* to s8 (8 bits, signed). Addresses-Coverity-ID: 1473914 ("Unsigned compared against 0") Fixes: 0189dbd7 ("ath10k: get the legacy rate index to update the txrate table") Signed-off-by: NGustavo A. R. Silva <gustavo@embeddedor.com> Signed-off-by: NKalle Valo <kvalo@codeaurora.org>
-
由 Balaji Pothunoori 提交于
Adding WMI service check for management tx ack rssi support; this is done to maintain common avg ack signal in user level for both data and management tx ack packet. Tested on QCA4019(fw version-10.4-3.2.1-00063). Signed-off-by: NBalaji Pothunoori <bpothuno@codeaurora.org> Signed-off-by: NKalle Valo <kvalo@codeaurora.org>
-
由 Wen Gong 提交于
For WoWLAN support it is expected to support wake up based on discovery of one or more known SSIDs. This is the WIPHY_WOWLAN_NET_DETECT feature, which shows up as an NL80211 feature flag. This shows up in 'iw phy' as: WoWLAN support: * wake up on network detection, up to 16 match sets And it can be enabled with command: iw phy0 wowlan enable net-detect interval 5000 delay 30 freqs 2412 matches ssid foo Firmware will do scan by the configured parameters after suspend and wakeup if it found matched SSIDs. Tested with QCA6174 hw3.0 with firmware WLAN.RM.4.4.1-00110-QCARMSWPZ-1. Signed-off-by: NWen Gong <wgong@codeaurora.org> [kvalo@codeaurora.org: fix lots of endian bugs, whitespace, commit log and style cleanup] Signed-off-by: NKalle Valo <kvalo@codeaurora.org>
-
由 Rakesh Pillai 提交于
Currently the wmi command for setting probe request oui, needed for mac randomization, is sent during the mac register. At this time, during the driver init the wmi has already been detached. This can cause unexpected behavior since the firmware is already down and the wmi has been detached. Send the wmi command for setting probe request oui during the driver start. This will make sure that the firmware is started and wmi is initialized before we send this command. Tested HW: WCN3990 Tested FW: WLAN.HL.2.0-01188-QCAHLSWMTPLZ-1 Fixes: 60e1d0fbSigned-off-by: NRakesh Pillai <pillair@codeaurora.org> Signed-off-by: NKalle Valo <kvalo@codeaurora.org>
-
由 Sriram R 提交于
While using 'ath10k_mac_get_rate_hw_value()' to obtain the hw value from the passed bitrate, there is a chance of out of bound array access when wrong bitrate is passed. This is fixed by comparing the bitrates within the correct size of the ath10k_rates array. Fixes commit f279294e ("ath10k: add support for configuring management packet rate"). Also correction made to some indents used in the above commit. Signed-off-by: NSriram R <srirrama@codeaurora.org> Signed-off-by: NKalle Valo <kvalo@codeaurora.org>
-
- 04 10月, 2018 2 次提交
-
-
https://github.com/nbd168/wireless由 Kalle Valo 提交于
mt76 patches for 4.20 * unify code between mt76x0, mt76x2 * mt76x0 fixes * tx power configuration fix for 76x2 * more progress on mt76x0e support * support for getting firmware version via ethtool * fix for rx buffer allocation regression on usb * fix for handling powersave responses * fix for mt76x2 beacon transmission
-
git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/ath.git由 Kalle Valo 提交于
ath.git patches for 4.20. Major changes: ath10k * retrieve MAC address from system firmware if provided * support extended board data download for dual-band QCA9984 * extended per sta tx statistics support via debugfs * average ack rssi support for data frames * speed up QCA6174 and QCA9377 firmware download using diag Copy Engine * HTT High Latency mode support needed by SDIO and USB support * get STA power save state via debugfs ath9k * add reset functionality for airtime station debugfs file
-
- 03 10月, 2018 28 次提交
-
-
由 Vakul Garg 提交于
Presently, for non-zero copy case, separate pages are allocated for storing plaintext and encrypted text of records. These pages are stored in sg_plaintext_data and sg_encrypted_data scatterlists inside record structure. Further, sg_plaintext_data & sg_encrypted_data are passed to cryptoapis for record encryption. Allocating separate pages for plaintext and encrypted text is inefficient from both required memory and performance point of view. This patch adds support of inplace encryption of records. For non-zero copy case, we reuse the pages from sg_encrypted_data scatterlist to copy the application's plaintext data. For the movement of pages from sg_encrypted_data to sg_plaintext_data scatterlists, we introduce a new function move_to_plaintext_sg(). This function add pages into sg_plaintext_data from sg_encrypted_data scatterlists. tls_do_encryption() is modified to pass the same scatterlist as both source and destination into aead_request_set_crypt() if inplace crypto has been enabled. A new ariable 'inplace_crypto' has been introduced in record structure to signify whether the same scatterlist can be used. By default, the inplace_crypto is enabled in get_rec(). If zero-copy is used (i.e. plaintext data is not copied), inplace_crypto is set to '0'. Signed-off-by: NVakul Garg <vakul.garg@nxp.com> Reviewed-by: NDave Watson <davejwatson@fb.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Hauke Mehrtens 提交于
The MAINTAINERS file contained the wrong file name of the driver. Fixes: 14fceff4 ("net: dsa: Add Lantiq / Intel DSA driver for vrx200") Reported-by: NJoe Perches <joe@perches.com> Signed-off-by: NHauke Mehrtens <hauke@hauke-m.de> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Stephen Hemminger 提交于
Similar to other patches from ERic. As diagnosed by Song Liu, ndo_poll_controller() can be very dangerous on loaded hosts, since the cpu calling ndo_poll_controller() might steal all NAPI contexts (for all RX/TX queues of the NIC). This capture can last for unlimited amount of time, since one cpu is generally not able to drain all the queues under load. In netvsc driver it uses NAPI for TX completions. The default poll_napi will do this for us now and avoid the capture. Signed-off-by: NStephen Hemminger <sthemmin@microsoft.com> Cc: Haiyang Zhang <haiyangz@microsoft.com> Cc: Eric Dumazet <edumazet@google.com> Reviewed-by: NHaiyang Zhang <haiyangz@microsoft.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Andrew Lunn 提交于
Fix the patch for the mv88e6xxx.h header file in MAINTAINERS Reported-by: NJoe Perches <joe@perches.com> Signed-off-by: NAndrew Lunn <andrew@lunn.ch> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
Merge branch 'for-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth-next Johan Hedberg says: ==================== pull request: bluetooth-next 2018-09-30 Here's the first bluetooth-next pull request for the 4.20 kernel. - Fixes & cleanups to hci_qca driver - NULL dereference fix to debugfs - Improved L2CAP Connection-oriented Channel MTU & MPS handling - Added support for USB-based RTL8822C controller - Added device ID for BCM4335C0 UART-based controller - Various other smaller cleanups & fixes Please let me know if there are any issues pulling. Thanks. ==================== Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Nathan Chancellor 提交于
Clang warns when one enumerated type is implicitly converted to another. drivers/net/ethernet/chelsio/cxgb4/cxgb4_dcb.c:390:4: warning: implicit conversion from enumeration type 'enum cxgb4_dcb_state' to different enumeration type 'enum cxgb4_dcb_state_input' [-Wenum-conversion] IEEE_FAUX_SYNC(dev, dcb); ^~~~~~~~~~~~~~~~~~~~~~~~ drivers/net/ethernet/chelsio/cxgb4/cxgb4_dcb.h:70:10: note: expanded from macro 'IEEE_FAUX_SYNC' CXGB4_DCB_STATE_FW_ALLSYNCED); ^~~~~~~~~~~~~~~~~~~~~~~~~~~~ Use the equivalent value of the expected type to silence Clang while resulting in no functional change. CXGB4_DCB_STATE_FW_ALLSYNCED = CXGB4_DCB_INPUT_FW_ALLSYNCED = 3 Signed-off-by: NNathan Chancellor <natechancellor@gmail.com> Reviewed-by: NNick Desaulniers <ndesaulniers@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Nathan Chancellor 提交于
Clang warns when one enumerated type is implicitly converted to another. drivers/net/ethernet/chelsio/cxgb4/cxgb4_dcb.c:303:7: warning: implicit conversion from enumeration type 'enum cxgb4_dcb_state' to different enumeration type 'enum cxgb4_dcb_state_input' [-Wenum-conversion] ? CXGB4_DCB_STATE_FW_ALLSYNCED ^~~~~~~~~~~~~~~~~~~~~~~~~~~~ drivers/net/ethernet/chelsio/cxgb4/cxgb4_dcb.c:304:7: warning: implicit conversion from enumeration type 'enum cxgb4_dcb_state' to different enumeration type 'enum cxgb4_dcb_state_input' [-Wenum-conversion] : CXGB4_DCB_STATE_FW_INCOMPLETE); ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~ 2 warnings generated. Use the equivalent value of the expected type to silence Clang while resulting in no functional change. CXGB4_DCB_STATE_FW_INCOMPLETE = CXGB4_DCB_INPUT_FW_INCOMPLETE = 2 CXGB4_DCB_STATE_FW_ALLSYNCED = CXGB4_DCB_INPUT_FW_ALLSYNCED = 3 Signed-off-by: NNathan Chancellor <natechancellor@gmail.com> Reviewed-by: NNick Desaulniers <ndesaulniers@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Nathan Chancellor 提交于
Clang warns: drivers/net/ethernet/freescale/dpaa/dpaa_eth.c:2734:34: warning: tentative array definition assumed to have one element static const struct of_device_id dpaa_match[]; ^ 1 warning generated. Turns out that since this driver was introduced in commit 9ad1a374 ("dpaa_eth: add support for DPAA Ethernet"), this declaration has been unused. Remove it to silence the warning. Signed-off-by: NNathan Chancellor <natechancellor@gmail.com> Acked-by: NMadalin Bucur <madalin.bucur@nxp.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Patrick Ruddy 提交于
The code to obtain the correct table for the incoming interface was missing for IPv6. This has been added along with the table creation notification to fib rules for the RTNL_FAMILY_IP6MR address family. Signed-off-by: NPatrick Ruddy <pruddy@vyatta.att-mail.com> Signed-off-by: NMike Manning <mmanning@vyatta.att-mail.com> Reviewed-by: NDavid Ahern <dsahern@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Robert Shearman 提交于
It is useful to be able to use the same socket for listening in a specific VRF, as for sending multicast packets out of a specific interface. However, the bound device on the socket currently takes precedence and results in the packets not being sent. Relax the condition on overriding the output interface to use for sending packets out of UDP, raw and ping sockets to allow multicast packets to be sent using the specified multicast interface. Signed-off-by: NRobert Shearman <rshearma@vyatta.att-mail.com> Signed-off-by: NMike Manning <mmanning@vyatta.att-mail.com> Reviewed-by: NDavid Ahern <dsahern@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Ido Schimmel 提交于
Commit 13cefad2 ("net: bridge: convert and rename mcast disabled") converted the 'multicast_disabled' field to an option bit named 'BROPT_MULTICAST_ENABLED'. While the old field was implicitly initialized to 0, the new field is not initialized, resulting in the bridge defaulting to multicast disabled state and breaking existing applications. Fix this by explicitly initializing the option. Fixes: 13cefad2 ("net: bridge: convert and rename mcast disabled") Signed-off-by: NIdo Schimmel <idosch@mellanox.com> Acked-by: NNikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
Ioana Radulescu says: ==================== dpaa2-eth: Add support for Rx flow classification The Management Complex (MC) firmware initially allowed the configuration of a single key to be used both for Rx flow hashing and flow classification. This prevented us from supporting Rx flow classification independently of the hash key configuration. Newer firmware versions expose separate commands for configuring the two types of keys, so we can use them to introduce Rx classification support. For frames that don't match any classification rule, we fall back to statistical distribution based on the current hash key. The first patch in this set updates the Rx hashing code to use the new firmware API for key config. Subsequent patches introduce the firmware API for configuring the classification and actual support for adding and deleting rules via ethtool. ==================== Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Ioana Radulescu 提交于
Add support for inserting and deleting Rx flow classification rules through ethtool. We support classification based on some header fields for flow-types ether, ip4, tcp4, udp4 and sctp4. Rx queues are core affine, so the action argument effectively selects on which cpu the matching frame will be processed. Discarding the frame is also supported. Signed-off-by: NIoana Radulescu <ruxandra.radulescu@nxp.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Ioana Radulescu 提交于
For firmware versions that support it, configure an Rx flow classification key at probe time. Hardware expects all rules in the classification table to share the same key. So we setup a key containing all supported fields at driver init and when a user adds classification rules through ethtool, we will just mask out the unused header fields. Since the key composition process is the same for flow classification and hashing, reuse existing code where possible. Signed-off-by: NIoana Radulescu <ruxandra.radulescu@nxp.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Ioana Radulescu 提交于
Since the array of supported header fields will be used for Rx flow classification as well, rename it from "hash_fields" to the more inclusive "dist_fields". Signed-off-by: NIoana Radulescu <ruxandra.radulescu@nxp.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Ioana Radulescu 提交于
The Management Complex (MC) firmware initially allowed the configuration of a single key to be used both for Rx flow hashing and flow classification. This prevented us from supporting Rx flow classification through ethtool. Starting with version 10.7.0, the Management Complex(MC) offers a new set of APIs for separate configuration of Rx hashing and classification keys. Update the Rx flow hashing support to use the new API, if available. Signed-off-by: NIoana Radulescu <ruxandra.radulescu@nxp.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Ben Dooks 提交于
The driver_info field that is used for describing each of the usb-net drivers using the usbnet.c core all declare their information as const and the usbnet.c itself does not try and modify the struct. It is therefore a good idea to make this const in the usbnet.c structure in case anyone tries to modify it. Signed-off-by: NBen Dooks <ben-linux@fluff.org> Signed-off-by: NBen Dooks <ben.dooks@codethink.co.uk> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Eric Dumazet 提交于
syzkaller was able to hit the WARN_ON(sock_owned_by_user(sk)); in tcp_close() While a socket is being closed, it is very possible other threads find it in rtnetlink dump. tcp_get_info() will acquire the socket lock for a short amount of time (slow = lock_sock_fast(sk)/unlock_sock_fast(sk, slow);), enough to trigger the warning. Fixes: 67db3e4b ("tcp: no longer hold ehash lock while calling tcp_get_info()") Signed-off-by: NEric Dumazet <edumazet@google.com> Reported-by: Nsyzbot <syzkaller@googlegroups.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Maciej Żenczykowski 提交于
Signed-off-by: NMaciej Żenczykowski <maze@google.com> Reviewed-by: NDavid Ahern <dsahern@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Maciej Żenczykowski 提交于
(allows for better compiler optimization) Signed-off-by: NMaciej Żenczykowski <maze@google.com> Reviewed-by: NDavid Ahern <dsahern@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Maciej Żenczykowski 提交于
(allows for better compiler optimization) Signed-off-by: NMaciej Żenczykowski <maze@google.com> Reviewed-by: NDavid Ahern <dsahern@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Maciej Żenczykowski 提交于
(allows for better compiler optimization) Signed-off-by: NMaciej Żenczykowski <maze@google.com> Reviewed-by: NDavid Ahern <dsahern@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Maciej Żenczykowski 提交于
(the parameter in question is mark) Signed-off-by: NMaciej Żenczykowski <maze@google.com> Reviewed-by: NDavid Ahern <dsahern@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Maciej Żenczykowski 提交于
(allows for better compiler optimization) Signed-off-by: NMaciej Żenczykowski <maze@google.com> Reviewed-by: NDavid Ahern <dsahern@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Maciej Żenczykowski 提交于
(allows for better compiler optimization) Signed-off-by: NMaciej Żenczykowski <maze@google.com> Reviewed-by: NDavid Ahern <dsahern@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Maciej Żenczykowski 提交于
Signed-off-by: NMaciej Żenczykowski <maze@google.com> Reviewed-by: NDavid Ahern <dsahern@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Maciej Żenczykowski 提交于
(allows for better compiler optimization) Signed-off-by: NMaciej Żenczykowski <maze@google.com> Reviewed-by: NDavid Ahern <dsahern@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
Merge tag 'wireless-drivers-next-for-davem-2018-10-02' of git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers-next Kalle Valo says: ==================== wireless-drivers-next patches for 4.20 First set of new features for 4.20. mt76 driver is going through major refactoring and that's why there are so many mt76 patches. iwlwifi is also under heavy development and smaller changes to other drivers. Also wireless-drivers was merged to fix a conflict between the two trees. Major changes: ath10k * limit available channels via DT ieee80211-freq-limit wil6210 * add 802.11r Fast Roaming support for AP and station modes * add support for channel 4 iwlwifi * new FW API handling * some improvements in the PCI recovery mechanism * enable a new scanning feature; * continued work on HE (mostly radiotap) * TKIP implementation in new devices * work continues for new 22560 hardware mt76 * add support for Alfa AWUS036ACM * lots of refactoring to make it easier to add new hardware support * prepare for adding mt76x0e (pci-e variant) support * add CONFIG_MT76x0E kconfig symbol brcmfmac * add support CYW89342 mini-PCIe device * add 4-way handshake offload detection for FT-802.1X * enable NL80211_EXT_FEATURE_CQM_RSSI_LIST * fix for proper support of 160MHz bandwidth rtl8xxxu * add rtl8188ctv support ==================== Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-