ath10k: support MAC address randomization in scan

The ath10k reports the random_mac_addr capability to upper layer
based on the service bit firmware reported. Driver sets the
spoofed flag in scan_ctrl_flag to firmware if upper layer has
enabled this feature in scan request.

Test with QCA6174 hw3.0 and firmware-6.bin_WLAN.RM.4.4.1-00102-QCARMSWP-1,
but QCA9377 is also affected.
Signed-off-by: NCarl Huang <cjhuang@codeaurora.org>
Signed-off-by: NKalle Valo <kvalo@codeaurora.org>

drivers/net/wireless/ath/ath10k/mac.c

@@ -5717,6 +5717,12 @@ static int ath10k_hw_scan(struct ieee80211_hw *hw,
 		arg.scan_ctrl_flags |= WMI_SCAN_FLAG_PASSIVE;
 	}
 
+	if (req->flags & NL80211_SCAN_FLAG_RANDOM_ADDR) {
+		arg.scan_ctrl_flags |=  WMI_SCAN_ADD_SPOOFED_MAC_IN_PROBE_REQ;
+		ether_addr_copy(arg.mac_addr.addr, req->mac_addr);
+		ether_addr_copy(arg.mac_mask.addr, req->mac_addr_mask);
+	}
+
 	if (req->n_channels) {
 		arg.n_channels = req->n_channels;
 		for (i = 0; i < arg.n_channels; i++)
@@ -8433,6 +8439,17 @@ int ath10k_mac_register(struct ath10k *ar)
 		goto err_dfs_detector_exit;
 	}
 
+	if (test_bit(WMI_SERVICE_SPOOF_MAC_SUPPORT, ar->wmi.svc_map)) {
+		ret = ath10k_wmi_scan_prob_req_oui(ar, ar->mac_addr);
+		if (ret) {
+			ath10k_err(ar, "failed to set prob req oui: %i\n", ret);
+			goto err_dfs_detector_exit;
+		}
+
+		ar->hw->wiphy->features |=
+			NL80211_FEATURE_SCAN_RANDOM_MAC_ADDR;
+	}
+
 	ar->hw->wiphy->cipher_suites = cipher_suites;
 
 	/* QCA988x and QCA6174 family chips do not support CCMP-256, GCMP-128

drivers/net/wireless/ath/ath10k/wmi-ops.h

@@ -119,6 +119,8 @@ struct wmi_ops {
 					 u32 value);
 	struct sk_buff *(*gen_scan_chan_list)(struct ath10k *ar,
 					      const struct wmi_scan_chan_list_arg *arg);
+	struct sk_buff *(*gen_scan_prob_req_oui)(struct ath10k *ar,
+						 u32 prob_req_oui);
 	struct sk_buff *(*gen_beacon_dma)(struct ath10k *ar, u32 vdev_id,
 					  const void *bcn, size_t bcn_len,
 					  u32 bcn_paddr, bool dtim_zero,
@@ -914,6 +916,26 @@ ath10k_wmi_scan_chan_list(struct ath10k *ar,
 	return ath10k_wmi_cmd_send(ar, skb, ar->wmi.cmd->scan_chan_list_cmdid);
 }
 
+static inline int
+ath10k_wmi_scan_prob_req_oui(struct ath10k *ar, const u8 mac_addr[ETH_ALEN])
+{
+	struct sk_buff *skb;
+	u32 prob_req_oui;
+
+	prob_req_oui = (((u32)mac_addr[0]) << 16) |
+		       (((u32)mac_addr[1]) << 8) | mac_addr[2];
+
+	if (!ar->wmi.ops->gen_scan_prob_req_oui)
+		return -EOPNOTSUPP;
+
+	skb = ar->wmi.ops->gen_scan_prob_req_oui(ar, prob_req_oui);
+	if (IS_ERR(skb))
+		return PTR_ERR(skb);
+
+	return ath10k_wmi_cmd_send(ar, skb,
+			ar->wmi.cmd->scan_prob_req_oui_cmdid);
+}
+
 static inline int
 ath10k_wmi_peer_assoc(struct ath10k *ar,
 		      const struct wmi_peer_assoc_complete_arg *arg)

drivers/net/wireless/ath/ath10k/wmi-tlv.c

@@ -1636,6 +1636,8 @@ ath10k_wmi_tlv_op_gen_start_scan(struct ath10k *ar,
 	cmd->num_bssids = __cpu_to_le32(arg->n_bssids);
 	cmd->ie_len = __cpu_to_le32(arg->ie_len);
 	cmd->num_probes = __cpu_to_le32(3);
+	ether_addr_copy(cmd->mac_addr.addr, arg->mac_addr.addr);
+	ether_addr_copy(cmd->mac_mask.addr, arg->mac_mask.addr);
 
 	/* FIXME: There are some scan flag inconsistencies across firmwares,
 	 * e.g. WMI-TLV inverts the logic behind the following flag.
@@ -2482,6 +2484,27 @@ ath10k_wmi_tlv_op_gen_scan_chan_list(struct ath10k *ar,
 	return skb;
 }
 
+static struct sk_buff *
+ath10k_wmi_tlv_op_gen_scan_prob_req_oui(struct ath10k *ar, u32 prob_req_oui)
+{
+	struct wmi_scan_prob_req_oui_cmd *cmd;
+	struct wmi_tlv *tlv;
+	struct sk_buff *skb;
+
+	skb = ath10k_wmi_alloc_skb(ar, sizeof(*tlv) + sizeof(*cmd));
+	if (!skb)
+		return ERR_PTR(-ENOMEM);
+
+	tlv = (void *)skb->data;
+	tlv->tag = __cpu_to_le16(WMI_TLV_TAG_STRUCT_SCAN_PROB_REQ_OUI_CMD);
+	tlv->len = __cpu_to_le16(sizeof(*cmd));
+	cmd = (void *)tlv->value;
+	cmd->prob_req_oui = __cpu_to_le32(prob_req_oui);
+
+	ath10k_dbg(ar, ATH10K_DBG_WMI, "wmi tlv scan prob req oui\n");
+	return skb;
+}
+
 static struct sk_buff *
 ath10k_wmi_tlv_op_gen_beacon_dma(struct ath10k *ar, u32 vdev_id,
 				 const void *bcn, size_t bcn_len,
@@ -3452,6 +3475,7 @@ static struct wmi_cmd_map wmi_tlv_cmd_map = {
 	.stop_scan_cmdid = WMI_TLV_STOP_SCAN_CMDID,
 	.scan_chan_list_cmdid = WMI_TLV_SCAN_CHAN_LIST_CMDID,
 	.scan_sch_prio_tbl_cmdid = WMI_TLV_SCAN_SCH_PRIO_TBL_CMDID,
+	.scan_prob_req_oui_cmdid = WMI_TLV_SCAN_PROB_REQ_OUI_CMDID,
 	.pdev_set_regdomain_cmdid = WMI_TLV_PDEV_SET_REGDOMAIN_CMDID,
 	.pdev_set_channel_cmdid = WMI_TLV_PDEV_SET_CHANNEL_CMDID,
 	.pdev_set_param_cmdid = WMI_TLV_PDEV_SET_PARAM_CMDID,
@@ -3820,6 +3844,7 @@ static const struct wmi_ops wmi_tlv_ops = {
 	.gen_set_sta_ps = ath10k_wmi_tlv_op_gen_set_sta_ps,
 	.gen_set_ap_ps = ath10k_wmi_tlv_op_gen_set_ap_ps,
 	.gen_scan_chan_list = ath10k_wmi_tlv_op_gen_scan_chan_list,
+	.gen_scan_prob_req_oui = ath10k_wmi_tlv_op_gen_scan_prob_req_oui,
 	.gen_beacon_dma = ath10k_wmi_tlv_op_gen_beacon_dma,
 	.gen_pdev_set_wmm = ath10k_wmi_tlv_op_gen_pdev_set_wmm,
 	.gen_request_stats = ath10k_wmi_tlv_op_gen_request_stats,

drivers/net/wireless/ath/ath10k/wmi-tlv.h

@@ -1706,6 +1706,15 @@ struct wmi_tlv_scan_chan_list_cmd {
 	__le32 num_scan_chans;
 } __packed;
 
+struct wmi_scan_prob_req_oui_cmd {
+/* OUI to be used in Probe Request frame when random MAC address is
+ * requested part of scan parameters. This is applied to both FW internal
+ * scans and host initiated scans. Host can request for random MAC address
+ * with WMI_SCAN_ADD_SPOOFED_MAC_IN_PROBE_REQ flag.
+ */
+	__le32 prob_req_oui;
+}  __packed;
+
 struct wmi_tlv_start_scan_cmd {
 	struct wmi_start_scan_common common;
 	__le32 burst_duration_ms;
@@ -1714,6 +1723,8 @@ struct wmi_tlv_start_scan_cmd {
 	__le32 num_ssids;
 	__le32 ie_len;
 	__le32 num_probes;
+	struct wmi_mac_addr mac_addr;
+	struct wmi_mac_addr mac_mask;
 } __packed;
 
 struct wmi_tlv_vdev_start_cmd {

drivers/net/wireless/ath/ath10k/wmi.c

@@ -42,6 +42,7 @@ static struct wmi_cmd_map wmi_cmd_map = {
 	.stop_scan_cmdid = WMI_STOP_SCAN_CMDID,
 	.scan_chan_list_cmdid = WMI_SCAN_CHAN_LIST_CMDID,
 	.scan_sch_prio_tbl_cmdid = WMI_SCAN_SCH_PRIO_TBL_CMDID,
+	.scan_prob_req_oui_cmdid = WMI_CMD_UNSUPPORTED,
 	.pdev_set_regdomain_cmdid = WMI_PDEV_SET_REGDOMAIN_CMDID,
 	.pdev_set_channel_cmdid = WMI_PDEV_SET_CHANNEL_CMDID,
 	.pdev_set_param_cmdid = WMI_PDEV_SET_PARAM_CMDID,
@@ -207,6 +208,7 @@ static struct wmi_cmd_map wmi_10x_cmd_map = {
 	.stop_scan_cmdid = WMI_10X_STOP_SCAN_CMDID,
 	.scan_chan_list_cmdid = WMI_10X_SCAN_CHAN_LIST_CMDID,
 	.scan_sch_prio_tbl_cmdid = WMI_CMD_UNSUPPORTED,
+	.scan_prob_req_oui_cmdid = WMI_CMD_UNSUPPORTED,
 	.pdev_set_regdomain_cmdid = WMI_10X_PDEV_SET_REGDOMAIN_CMDID,
 	.pdev_set_channel_cmdid = WMI_10X_PDEV_SET_CHANNEL_CMDID,
 	.pdev_set_param_cmdid = WMI_10X_PDEV_SET_PARAM_CMDID,
@@ -374,6 +376,7 @@ static struct wmi_cmd_map wmi_10_2_4_cmd_map = {
 	.stop_scan_cmdid = WMI_10_2_STOP_SCAN_CMDID,
 	.scan_chan_list_cmdid = WMI_10_2_SCAN_CHAN_LIST_CMDID,
 	.scan_sch_prio_tbl_cmdid = WMI_CMD_UNSUPPORTED,
+	.scan_prob_req_oui_cmdid = WMI_CMD_UNSUPPORTED,
 	.pdev_set_regdomain_cmdid = WMI_10_2_PDEV_SET_REGDOMAIN_CMDID,
 	.pdev_set_channel_cmdid = WMI_10_2_PDEV_SET_CHANNEL_CMDID,
 	.pdev_set_param_cmdid = WMI_10_2_PDEV_SET_PARAM_CMDID,
@@ -541,6 +544,7 @@ static struct wmi_cmd_map wmi_10_4_cmd_map = {
 	.stop_scan_cmdid = WMI_10_4_STOP_SCAN_CMDID,
 	.scan_chan_list_cmdid = WMI_10_4_SCAN_CHAN_LIST_CMDID,
 	.scan_sch_prio_tbl_cmdid = WMI_10_4_SCAN_SCH_PRIO_TBL_CMDID,
+	.scan_prob_req_oui_cmdid = WMI_CMD_UNSUPPORTED,
 	.pdev_set_regdomain_cmdid = WMI_10_4_PDEV_SET_REGDOMAIN_CMDID,
 	.pdev_set_channel_cmdid = WMI_10_4_PDEV_SET_CHANNEL_CMDID,
 	.pdev_set_param_cmdid = WMI_10_4_PDEV_SET_PARAM_CMDID,
@@ -1338,6 +1342,7 @@ static struct wmi_cmd_map wmi_10_2_cmd_map = {
 	.stop_scan_cmdid = WMI_10_2_STOP_SCAN_CMDID,
 	.scan_chan_list_cmdid = WMI_10_2_SCAN_CHAN_LIST_CMDID,
 	.scan_sch_prio_tbl_cmdid = WMI_CMD_UNSUPPORTED,
+	.scan_prob_req_oui_cmdid = WMI_CMD_UNSUPPORTED,
 	.pdev_set_regdomain_cmdid = WMI_10_2_PDEV_SET_REGDOMAIN_CMDID,
 	.pdev_set_channel_cmdid = WMI_10_2_PDEV_SET_CHANNEL_CMDID,
 	.pdev_set_param_cmdid = WMI_10_2_PDEV_SET_PARAM_CMDID,

drivers/net/wireless/ath/ath10k/wmi.h

@@ -791,6 +791,7 @@ struct wmi_cmd_map {
 	u32 stop_scan_cmdid;
 	u32 scan_chan_list_cmdid;
 	u32 scan_sch_prio_tbl_cmdid;
+	u32 scan_prob_req_oui_cmdid;
 	u32 pdev_set_regdomain_cmdid;
 	u32 pdev_set_channel_cmdid;
 	u32 pdev_set_param_cmdid;
@@ -3168,6 +3169,8 @@ struct wmi_start_scan_arg {
 	u16 channels[64];
 	struct wmi_ssid_arg ssids[WLAN_SCAN_PARAMS_MAX_SSID];
 	struct wmi_bssid_arg bssids[WLAN_SCAN_PARAMS_MAX_BSSID];
+	struct wmi_mac_addr mac_addr;
+	struct wmi_mac_addr mac_mask;
 };
 
 /* scan control flags */
@@ -3191,6 +3194,12 @@ struct wmi_start_scan_arg {
  */
 #define WMI_SCAN_CONTINUE_ON_ERROR 0x80
 
+/* Use random MAC address for TA for Probe Request frame and add
+ * OUI specified by WMI_SCAN_PROB_REQ_OUI_CMDID to the Probe Request frame.
+ * if OUI is not set by WMI_SCAN_PROB_REQ_OUI_CMDID then the flag is ignored.
+ */
+#define WMI_SCAN_ADD_SPOOFED_MAC_IN_PROBE_REQ   0x1000
+
 /* WMI_SCAN_CLASS_MASK must be the same value as IEEE80211_SCAN_CLASS_MASK */
 #define WMI_SCAN_CLASS_MASK 0xFF000000