Now that open delay and sample delay for each channel is configurable
via DT, the default IDLE_TIMEOUT value is not enough as this is
calculated based on hardcoded macros. This results in driver returning
EBUSY sometimes. Fix this by increasing the timeout
value based on maximum value possible to open delay and sample delays
for each channel.

Fixes: 5dc11e81 ("iio: adc: ti_am335x_adc: make sample delay, open delay, averaging DT parameters")
Signed-off-by: NVignesh R <vigneshr@ti.com>
Acked-by: NLee Jones <lee.jones@linaro.org>
Cc: <Stable@vger.kernel.org>
Signed-off-by: NJonathan Cameron <jic23@kernel.org>

It is possible that two or more ADC channels can be simultaneously
requested for raw samples, in which case there can be race in access to
FIFO data resulting in loss of samples.
If am335x_tsc_se_set_once() is called again from tiadc_read_raw(), when
ADC is still acquired to sample one of the channels, the second process
might be put into uninterruptible sleep state. Fix these issues, by
protecting FIFO access and channel configurations with a mutex. Since
tiadc_read_raw() might take anywhere between few microseconds to few
milliseconds to finish execution (depending on averaging and delay
values supplied via DT), its better to use mutex instead of spinlock.

Fixes: 7ca6740c ("mfd: input: iio: ti_amm335x: Rework TSC/ADC synchronization")
Signed-off-by: NVignesh R <vigneshr@ti.com>
Cc: <Stable@vger.kernel.org>
Signed-off-by: NJonathan Cameron <jic23@kernel.org>

Fix an incorrect assignment due to a typo on a variable name. The
variable val2 should be assigned 100000 and not val.
Signed-off-by: NColin Ian King <colin.king@canonical.com>
Reviewed-By: NMatt Ranostay <mranostay@gmail.com>
Signed-off-by: NJonathan Cameron <jic23@kernel.org>

When using CONFIG_DEBUG_ATOMIC_SLEEP, the scheduler nicely points out
that we're calling sleeping primitives within the wait_event loop, which
means we might clobber the task state:

[   10.831289] do not call blocking ops when !TASK_RUNNING; state=1 set at [<ffffffc00026b610>]
[   10.845531] ------------[ cut here ]------------
[   10.850161] WARNING: at kernel/sched/core.c:7630
...
[   12.164333] ---[ end trace 45409966a9a76438 ]---
[   12.168942] Call trace:
[   12.171391] [<ffffffc00024ed44>] __might_sleep+0x64/0x90
[   12.176699] [<ffffffc000954774>] mutex_lock_nested+0x50/0x3fc
[   12.182440] [<ffffffc0007b9424>] iio_kfifo_buf_data_available+0x28/0x4c
[   12.189043] [<ffffffc0007b76ac>] iio_buffer_ready+0x60/0xe0
[   12.194608] [<ffffffc0007b7834>] iio_buffer_read_first_n_outer+0x108/0x1a8
[   12.201474] [<ffffffc000370d48>] __vfs_read+0x58/0x114
[   12.206606] [<ffffffc000371740>] vfs_read+0x94/0x118
[   12.211564] [<ffffffc0003720f8>] SyS_read+0x64/0xb4
[   12.216436] [<ffffffc000203cb4>] el0_svc_naked+0x24/0x28

To avoid this, we should (a la https://lwn.net/Articles/628628/) use the
wait_woken() function, which avoids the nested sleeping while still
handling races between waiting / wake-events.
Signed-off-by: NBrian Norris <briannorris@chromium.org>
Reviewed-by: NLars-Peter Clausen <lars@metafoo.de>
Cc: <Stable@vger.kernel.org> # 3.19+ for introduction of wake_woken
Signed-off-by: NJonathan Cameron <jic23@kernel.org>

The call to i2c_get_clientdata(client) returns a struct iio_dev*, not
the needed struct ads1015_data*. We need here an intermediate step as
in the function: void ads1015_get_channels_config(struct i2c_client *client).
Signed-off-by: NGiorgio Dal Molin <giorgio.nicole@arcor.de>
Fixes: ecc24e72 ("iio: adc: Add TI ADS1015 ADC driver support")
Cc: <Stable@vger.kernel.org>
Signed-off-by: NJonathan Cameron <jic23@kernel.org>

The driver always assumes that an input device has been created when
reading channel 3. This causes a kernel panic when dereferencing
st->ts_input.

The change was introduced in
commit 84882b06 ("iio: adc: at91_adc: Add support for touchscreens
without TSMR"). Earlier versions only entered that part of the if-else
statement if only the following flags are set:

AT91_ADC_IER_XRDY | AT91_ADC_IER_YRDY | AT91_ADC_IER_PRDY
Signed-off-by: NAnders Darander <anders@chargestorm.se>
Acked-by: NAlexandre Belloni <alexandre.belloni@free-electrons.com>
Cc: <Stable@vger.kernel.org>
Signed-off-by: NJonathan Cameron <jic23@kernel.org>

Uninitialized channel pointer causes segmentation fault when we
call free(channel) during cleanup() with no channels initialized.
This happens when you exit early for usage errors.  Initialize
the pointer to NULL when it is declared.
Signed-off-by: NAlison Schofield <amsfield22@gmail.com>
Cc: Daniel Baluta <daniel.baluta@gmail.com>
Tested-by: NGregor Boirie <gregor.boirie@parrot.com>
Signed-off-by: NJonathan Cameron <jic23@kernel.org>

Replace the i2c_smbus_read_byte commmands used to retrieve the sensor
data with an i2c_master_recv command.

The smbus read byte method fails because the device does not expect a
stop condition after sending the first byte. When we issue the second
read, we are getting the first byte again. Net effect is that of the 14
bits used for the measurement, the 8 most significant bits are correct,
the lower 6 are not.

None of the smbus read protocols follow the pattern this device requires
(S Addr Rd [A] Data [A] Data NA P), hence the switch to an i2c receive
transaction.

Applicable from original introduction of this driver, but will require
backporting due to churn in the code.
Signed-off-by: NAlison Schofield <amsfield22@gmail.com>
Cc: Daniel Baluta <daniel.baluta@gmail.com>
Cc: <Stable@vger.kernel.org>
Signed-off-by: NJonathan Cameron <jic23@kernel.org>

In commit 3d838118 ("iio: pressure: bmp280: add power management")

For some reason the code in the runtime suspend/resume hooks
got wrong (I suspect in the ambition to cut down boilerplate)
and it seems it was tested without CONFIG_PM and crashes like
so for me:

Unable to handle kernel NULL pointer dereference at virtual address 0000000c
pgd = c0204000
[0000000c] *pgd=00000000
Internal error: Oops: 5 [#1] PREEMPT SMP ARM
Modules linked in:
CPU: 1 PID: 89 Comm: kworker/1:2 Not tainted
  4.7.0-03348-g90dc3680458a-dirty #99
Hardware name: Generic DT based system
Workqueue: pm pm_runtime_work
task: df3c6300 ti: dec8a000 task.ti: dec8a000
PC is at regulator_disable+0x0/0x6c
LR is at bmp280_runtime_suspend+0x3c/0xa4

Dereferencing the BMP280 state container properly fixes the problem,
sorry for screwing up.

Fixes: 3d838118 ("iio: pressure: bmp280: add power management")
Signed-off-by: NLinus Walleij <linus.walleij@linaro.org>
Tested-by: NJarkko Nikula <jarkko.nikula@linux.intel.com>
Cc: <Stable@vger.kernel.org>
Signed-off-by: NJonathan Cameron <jic23@kernel.org>

Select IIO_BUFFER and IIO_TRIGGERED_BUFFER to compile.
Remove IIO_TRIGGER if present since IIO_BUFFER selects it.
Signed-off-by: NAlison Schofield <amsfield22@gmail.com>
Cc: Daniel Baluta <daniel.baluta@gmail.com>
Signed-off-by: NJonathan Cameron <jic23@kernel.org>

The devm_iio_device_register function should not be used if custom
operations must be performed in the remove callback. This patch replaces
the dem_iio_device_register call with a iio_device_register call and
respective iio_device_unregister call in the remove callback.

Fixes: 765550e4 ("iio: stx104: Add GPIO support for the Apex Embedded Systems STX104")
Signed-off-by: NWilliam Breathitt Gray <vilhelm.gray@gmail.com>
Cc: <Stable@vger.kernel.org>
Signed-off-by: NJonathan Cameron <jic23@kernel.org>

Use the iio_pollfunc_store_time parameter during triggered buffer
set-up to get valid timestamps.
Signed-off-by: NAlison Schofield <amsfield22@gmail.com>
Cc: Daniel Baluta <daniel.baluta@gmail.com>
Cc: <Stable@vger.kernel.org>
Signed-off-by: NJonathan Cameron <jic23@kernel.org>

Use the iio_pollfunc_store_time parameter during triggered buffer
set-up to get valid timestamps.
Signed-off-by: NAlison Schofield <amsfield22@gmail.com>
Cc: Daniel Baluta <daniel.baluta@gmail.com>
Reviewed-By: NTiberiu Breana <tiberiu.a.breana@intel.com>
Cc: <Stable@vger.kernel.org>
Signed-off-by: NJonathan Cameron <jic23@kernel.org>

Use the iio_pollfunc_store_time parameter during triggered buffer
set-up to get valid timestamps.
Signed-off-by: NAlison Schofield <amsfield22@gmail.com>
Cc: Daniel Baluta <daniel.baluta@gmail.com>
Reviewed-By: NTiberiu Breana <tiberiu.a.breana@intel.com>
Cc: <Stable@vger.kernel.org>
Signed-off-by: NJonathan Cameron <jic23@kernel.org>

The data buffer for captured mode for the ad799x driver is allocated in the
update_scan_mode() callback. This callback is not set in the iio_info
struct for the ad7791/ad7995/ad7999, which means that the data buffer is
not allocated when a captured transfer is started. As a result the driver
crashes when the first sample is received. To fix this properly set the
update_scan_mode() callback.

Fixes: d8dca330 ("staging:iio:ad799x: Preallocate sample buffer")
Signed-off-by: NLars-Peter Clausen <lars@metafoo.de>
Cc: <Stable@vger.kernel.org>
Signed-off-by: NJonathan Cameron <jic23@kernel.org>

Use the IS_ENABLED() helper macro to ensure that the configfs group is
initialized either when configfs is built-in or when configfs is built as a
module. Otherwise software trigger creation will result in undefined
behaviour when configfs is built as a mdoule since the configfs group for
the trigger is not properly initialized.

Fixes: b662f809 ("iio: core: Introduce IIO software triggers")
Signed-off-by: NLars-Peter Clausen <lars@metafoo.de>
Acked-by: NDaniel Baluta <daniel.baluta@intel.com>
Cc: <Stable@vger.kernel.org>
Signed-off-by: NJonathan Cameron <jic23@kernel.org>

The 'break' statement after calling ad5933_cmd only breaks out of the
'for' loop, which then unconditionally sets the return value to -EINVAL.
Move the initialisation of 'ret' so we return the correct value.
Signed-off-by: NPhil Turnbull <phil.turnbull@oracle.com>
Signed-off-by: NJonathan Cameron <jic23@kernel.org>

PTR_ERR should access the value just tested by IS_ERR, otherwise
the wrong error code will be returned.
Signed-off-by: NWei Yongjun <yongjun_wei@trendmicro.com.cn>
Reviewed-by: NLinus Walleij <linus.walleij@linaro.org>
Signed-off-by: NJonathan Cameron <jic23@kernel.org>

Pull thermal updates from Zhang Rui:

 - Fix a race condition when updating cooling device, which may lead to
   a situation where a thermal governor never updates the cooling
   device.  From Michele Di Giorgio.

 - Fix a zero division error when disabling the forced idle injection
   from the intel powerclamp.  From Petr Mladek.

 - Add suspend/resume callback for intel_pch_thermal thermal driver.
   From Srinivas Pandruvada.

 - Another two fixes for clocking cooling driver and hwmon sysfs I/F.
   From Michele Di Giorgio and Kuninori Morimoto.

[ Hmm.  That suspend/resume callback for intel_pch_thermal doesn't look
  like a fix, but I'm letting it slide..  - Linus ]

* 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/rzhang/linux:
  thermal: clock_cooling: Fix missing mutex_init()
  thermal: hwmon: EXPORT_SYMBOL_GPL for thermal hwmon sysfs
  thermal: fix race condition when updating cooling device
  thermal/powerclamp: Prevent division by zero when counting interval
  thermal: intel_pch_thermal: Add suspend/resume callback

Pull m68knommu fix from Greg Ungerer:
 "This contains only a single fix for a register corruption problem on
  certain types of m68k flat format binaries"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/gerg/m68knommu:
  m68knommu: fix user a5 register being overwritten

Merge tag 'fixes-for-linus-4.8' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging

Pull h8300 and unicore32 architecture fixes from Guenter Roeck:
 "Two patches to fix h8300 and unicore32 builds.

  unicore32 builds have been broken since v4.6.  The fix has been
  available in -next since March of this year.

  h8300 builds have been broken since the last commit window.  The fix
  has been available in -next since June of this year"

* tag 'fixes-for-linus-4.8' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging:
  h8300: Add missing include file to asm/io.h
  unicore32: mm: Add missing parameter to arch_vma_access_permitted

Pull arm64 fixes from Catalin Marinas:

 - support for nr_cpus= command line argument (maxcpus was previously
   changed to allow secondary CPUs to be hot-plugged)

 - ARM PMU interrupt handling fix

 - fix potential TLB conflict in the hibernate code

 - improved handling of EL1 instruction aborts (better error reporting)

 - removal of useless jprobes code for stack saving/restoring

 - defconfig updates

* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
  arm64: defconfig: enable CONFIG_LOCALVERSION_AUTO
  arm64: defconfig: add options for virtualization and containers
  arm64: hibernate: handle allocation failures
  arm64: hibernate: avoid potential TLB conflict
  arm64: Handle el1 synchronous instruction aborts cleanly
  arm64: Remove stack duplicating code from jprobes
  drivers/perf: arm-pmu: Fix handling of SPI lacking "interrupt-affinity" property
  drivers/perf: arm-pmu: convert arm_pmu_mutex to spinlock
  arm64: Support hard limit of cpu count by nr_cpus

Pull KVM fixes from Radim Krčmář:
 "KVM:
   - lock kvm_device list to prevent corruption on device creation.

  PPC:
   - split debugfs initialization from creation of the xics device to
     unlock the newly taken kvm lock earlier.

  s390:
   - prevent userspace from triggering two WARN_ON_ONCE.

  MIPS:
   - fix several issues in the management of TLB faults (Cc: stable)"

* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
  MIPS: KVM: Propagate kseg0/mapped tlb fault errors
  MIPS: KVM: Fix gfn range check in kseg0 tlb faults
  MIPS: KVM: Add missing gfn range check
  MIPS: KVM: Fix mapped fault broken commpage handling
  KVM: Protect device ops->create and list_add with kvm->lock
  KVM: PPC: Move xics_debugfs_init out of create
  KVM: s390: reset KVM_REQ_MMU_RELOAD if mapping the prefix failed
  KVM: s390: set the prefix initially properly

Pull block fixes from Jens Axboe:

 - an NVMe fix from Gabriel, fixing a suspend/resume issue on some
   setups

 - addition of a few missing entries in the block queue sysfs
   documentation, from Joe

 - a fix for a sparse shadow warning for the bvec iterator, from
   Johannes

 - a writeback deadlock involving raid issuing barriers, and not
   flushing the plug when we wakeup the flusher threads.  From
   Konstantin

 - a set of patches for the NVMe target/loop/rdma code, from Roland and
   Sagi

* 'for-linus' of git://git.kernel.dk/linux-block:
  bvec: avoid variable shadowing warning
  doc: update block/queue-sysfs.txt entries
  nvme: Suspend all queues before deletion
  mm, writeback: flush plugged IO in wakeup_flusher_threads()
  nvme-rdma: Remove unused includes
  nvme-rdma: start async event handler after reconnecting to a controller
  nvmet: Fix controller serial number inconsistency
  nvmet-rdma: Don't use the inline buffer in order to avoid allocation for small reads
  nvmet-rdma: Correctly handle RDMA device hot removal
  nvme-rdma: Make sure to shutdown the controller if we can
  nvme-loop: Remove duplicate call to nvme_remove_namespaces
  nvme-rdma: Free the I/O tags when we delete the controller
  nvme-rdma: Remove duplicate call to nvme_remove_namespaces
  nvme-rdma: Fix device removal handling
  nvme-rdma: Queue ns scanning after a sucessful reconnection
  nvme-rdma: Don't leak uninitialized memory in connect request private data

h8300 builds fail with

arch/h8300/include/asm/io.h:9:15: error: unknown type name ‘u8’
arch/h8300/include/asm/io.h:15:15: error: unknown type name ‘u16’
arch/h8300/include/asm/io.h:21:15: error: unknown type name ‘u32’

and many related errors.

Fixes: 23c82d41bdf4 ("kexec-allow-architectures-to-override-boot-mapping-fix")
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: NGuenter Roeck <linux@roeck-us.net>

unicore32 fails to compile with the following errors.

mm/memory.c: In function ‘__handle_mm_fault’:
mm/memory.c:3381: error:
	too many arguments to function ‘arch_vma_access_permitted’
mm/gup.c: In function ‘check_vma_flags’:
mm/gup.c:456: error:
	too many arguments to function ‘arch_vma_access_permitted’
mm/gup.c: In function ‘vma_permits_fault’:
mm/gup.c:640: error:
	too many arguments to function ‘arch_vma_access_permitted’

Fixes: d61172b4 ("mm/core, x86/mm/pkeys: Differentiate instruction fetches")
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@kernel.org>
Signed-off-by: NGuenter Roeck <linux@roeck-us.net>
Acked-by: NGuan Xuetao <gxt@mprc.pku.edu.cn>

Pull VFIO fix from Alex Williamson:
 "Fix oops when dereferencing empty data (Alex Williamson)"

* tag 'vfio-v4.8-rc2' of git://github.com/awilliam/linux-vfio:
  vfio/pci: Fix NULL pointer oops in error interrupt setup handling

Pull nfsd fixes from Bruce Fields:
 "Fixes for the dentry refcounting leak I introduced in 4.8-rc1, and for
  races in the LOCK code which appear to go back to the big nfsd state
  lock removal from 3.17"

* tag 'nfsd-4.8-1' of git://linux-nfs.org/~bfields/linux:
  nfsd: don't return an unhashed lock stateid after taking mutex
  nfsd: Fix race between FREE_STATEID and LOCK
  nfsd: fix dentry refcounting on create

Pull power management fixes from Rafael Wysocki:
 "Two hibernation fixes allowing it to work with the recently added
  randomization of the kernel identity mapping base on x86-64 and one
  cpufreq driver regression fix.

  Specifics:

   - Fix the x86 identity mapping creation helpers to avoid the
     assumption that the base address of the mapping will always be
     aligned at the PGD level, as it may be aligned at the PUD level if
     address space randomization is enabled (Rafael Wysocki).

   - Fix the hibernation core to avoid executing tracing functions
     before restoring the processor state completely during resume
     (Thomas Garnier).

   - Fix a recently introduced regression in the powernv cpufreq driver
     that causes it to crash due to an out-of-bounds array access
     (Akshay Adiga)"

* tag 'pm-4.8-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  PM / hibernate: Restore processor state before using per-CPU variables
  x86/power/64: Always create temporary identity mapping correctly
  cpufreq: powernv: Fix crash in gpstate_timer_handler()

Pull x86 fixes from Ingo Molnar:
 "This is bigger than usual - the reason is partly a pent-up stream of
  fixes after the merge window and partly accidental.  The fixes are:

   - five patches to fix a boot failure on Andy Lutomirsky's laptop
   - four SGI UV platform fixes
   - KASAN fix
   - warning fix
   - documentation update
   - swap entry definition fix
   - pkeys fix
   - irq stats fix"

* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/apic/x2apic, smp/hotplug: Don't use before alloc in x2apic_cluster_probe()
  x86/efi: Allocate a trampoline if needed in efi_free_boot_services()
  x86/boot: Rework reserve_real_mode() to allow multiple tries
  x86/boot: Defer setup_real_mode() to early_initcall time
  x86/boot: Synchronize trampoline_cr4_features and mmu_cr4_features directly
  x86/boot: Run reserve_bios_regions() after we initialize the memory map
  x86/irq: Do not substract irq_tlb_count from irq_call_count
  x86/mm: Fix swap entry comment and macro
  x86/mm/kaslr: Fix -Wformat-security warning
  x86/mm/pkeys: Fix compact mode by removing protection keys' XSAVE buffer manipulation
  x86/build: Reduce the W=1 warnings noise when compiling x86 syscall tables
  x86/platform/UV: Fix kernel panic running RHEL kdump kernel on UV systems
  x86/platform/UV: Fix problem with UV4 BIOS providing incorrect PXM values
  x86/platform/UV: Fix bug with iounmap() of the UV4 EFI System Table causing a crash
  x86/platform/UV: Fix problem with UV4 Socket IDs not being contiguous
  x86/entry: Clarify the RF saving/restoring situation with SYSCALL/SYSRET
  x86/mm: Disable preemption during CR3 read+write
  x86/mm/KASLR: Increase BRK pages for KASLR memory randomization
  x86/mm/KASLR: Fix physical memory calculation on KASLR memory randomization
  x86, kasan, ftrace: Put APIC interrupt handlers into .irqentry.text

Pull timer fixes from Ingo Molnar:
 "Misc fixes: a /dev/rtc regression fix, two APIC timer period
  calibration fixes, an ARM clocksource driver fix and a NOHZ
  power use regression fix"

* 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/hpet: Fix /dev/rtc breakage caused by RTC cleanup
  x86/timers/apic: Inform TSC deadline clockevent device about recalibration
  x86/timers/apic: Fix imprecise timer interrupts by eliminating TSC clockevents frequency roundoff error
  timers: Fix get_next_timer_interrupt() computation
  clocksource/arm_arch_timer: Force per-CPU interrupt to be level-triggered

* pm-sleep:
  PM / hibernate: Restore processor state before using per-CPU variables
  x86/power/64: Always create temporary identity mapping correctly

* pm-cpufreq:
  cpufreq: powernv: Fix crash in gpstate_timer_handler()

Pull scheduler fixes from Ingo Molnar:
 "Misc fixes: cputime fixes, two deadline scheduler fixes and a cgroups
  scheduling fix"

* 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  sched/cputime: Fix omitted ticks passed in parameter
  sched/cputime: Fix steal time accounting
  sched/deadline: Fix lock pinning warning during CPU hotplug
  sched/cputime: Mitigate performance regression in times()/clock_gettime()
  sched/fair: Fix typo in sync_throttle()
  sched/deadline: Fix wrap-around in DL heap

Restore the processor state before calling any other functions to
ensure per-CPU variables can be used with KASLR memory randomization.

Tracing functions use per-CPU variables (GS based on x86) and one was
called just before restoring the processor state fully. It resulted
in a double fault when both the tracing & the exception handler
functions tried to use a per-CPU variable.

Fixes: bb3632c6 (PM / sleep: trace events for suspend/resume)
Reported-and-tested-by: NBorislav Petkov <bp@suse.de>
Reported-by: NJiri Kosina <jikos@kernel.org>
Tested-by: NRafael J. Wysocki <rafael@kernel.org>
Tested-by: NJiri Kosina <jkosina@suse.cz>
Signed-off-by: NThomas Garnier <thgarnie@google.com>
Acked-by: NPavel Machek <pavel@ucw.cz>
Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>

Pull perf fixes from Ingo Molnar:
 "Mostly tooling fixes, plus two uncore-PMU fixes, an uprobes fix, a
  perf-cgroups fix and an AUX events fix"

* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  perf/x86/intel/uncore: Add enable_box for client MSR uncore
  perf/x86/intel/uncore: Fix uncore num_counters
  uprobes/x86: Fix RIP-relative handling of EVEX-encoded instructions
  perf/core: Set cgroup in CPU contexts for new cgroup events
  perf/core: Fix sideband list-iteration vs. event ordering NULL pointer deference crash
  perf probe ppc64le: Fix probe location when using DWARF
  perf probe: Add function to post process kernel trace events
  tools: Sync cpufeatures headers with the kernel
  toops: Sync tools/include/uapi/linux/bpf.h with the kernel
  tools: Sync cpufeatures.h and vmx.h with the kernel
  perf probe: Support signedness casting
  perf stat: Avoid skew when reading events
  perf probe: Fix module name matching
  perf probe: Adjust map->reloc offset when finding kernel symbol from map
  perf hists: Trim libtraceevent trace_seq buffers
  perf script: Add 'bpf-output' field to usage message

nfsd4_lock will take the st_mutex before working with the stateid it
gets, but between the time when we drop the cl_lock and take the mutex,
the stateid could become unhashed (a'la FREE_STATEID). If that happens
the lock stateid returned to the client will be forgotten.

Fix this by first moving the st_mutex acquisition into
lookup_or_create_lock_state. Then, have it check to see if the lock
stateid is still hashed after taking the mutex. If it's not, then put
the stateid and try the find/create again.
Signed-off-by: NJeff Layton <jlayton@redhat.com>
Tested-by: NAlexey Kodanev <alexey.kodanev@oracle.com>
Cc: stable@vger.kernel.org # feb9dad5 nfsd: Always lock state exclusively.
Cc: stable@vger.kernel.org
Signed-off-by: NJ. Bruce Fields <bfields@redhat.com>

Pull locking fixes from Ingo Molnar:
 "Misc fixes: lockstat fix, futex fix on !MMU systems, big endian fix
  for qrwlocks and a race fix for pvqspinlocks"

* 'locking-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  locking/pvqspinlock: Fix a bug in qstat_read()
  locking/pvqspinlock: Fix double hash race
  locking/qrwlock: Fix write unlock bug on big endian systems
  futex: Assume all mappings are private on !MMU systems

Pull irq fix from Ingo Molnar:
 "A fix for an MSI regression"

* 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  genirq/msi: Make sure PCI MSIs are activated early

Pull EFI fixes from Ingo Molnar:
 "A fix for EFI capsules and an SGI UV platform fix"

* 'efi-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  efi/capsule: Allocate whole capsule into virtual memory
  x86/platform/uv: Skip UV runtime services mapping in the efi_runtime_disabled case