- 25 8月, 2017 1 次提交
-
-
由 Bob Peterson 提交于
In 9dbbfb0a function tipc_sk_reinit had additional logic added to loop in the event that function rhashtable_walk_next() returned -EAGAIN. No worries. However, if rhashtable_walk_start returns -EAGAIN, it does "continue", and therefore skips the call to rhashtable_walk_stop(). That has the effect of calling rcu_read_lock() without its paired call to rcu_read_unlock(). Since rcu_read_lock() may be nested, the problem may not be apparent for a while, especially since resize events may be rare. But the comments to rhashtable_walk_start() state: * ...Note that we take the RCU lock in all * cases including when we return an error. So you must always call * rhashtable_walk_stop to clean up. This patch replaces the continue with a goto and label to ensure a matching call to rhashtable_walk_stop(). Signed-off-by: NBob Peterson <rpeterso@redhat.com> Acked-by: NHerbert Xu <herbert@gondor.apana.org.au> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 24 8月, 2017 6 次提交
-
-
由 andy zhou 提交于
Current implementation treats the burst configuration the same as rate configuration. This can cause the per packet cost to be lower than configured. In effect, this bug causes the token bucket to be refilled at a higher rate than what user has specified. This patch changes the implementation so that the token bucket size is controlled by "rate + burst", while maintain the token bucket refill rate the same as user specified. Fixes: 96518518 ("netfilter: add nftables") Signed-off-by: NAndy Zhou <azhou@ovn.org> Acked-by: NJoe Stringer <joe@ovn.org> Signed-off-by: NPablo Neira Ayuso <pablo@netfilter.org>
-
由 Xin Long 提交于
Commit 4440a2ab ("netfilter: synproxy: Check oom when adding synproxy and seqadj ct extensions") wanted to drop the packet when it fails to add seqadj ext due to no memory by checking if nfct_seqadj_ext_add returns NULL. But that nfct_seqadj_ext_add returns NULL can also happen when seqadj ext already exists in a nf_conn. It will cause that userspace protocol doesn't work when both dnat and snat are configured. Li Shuang found this issue in the case: Topo: ftp client router ftp server 10.167.131.2 <-> 10.167.131.254 10.167.141.254 <-> 10.167.141.1 Rules: # iptables -t nat -A PREROUTING -i eth1 -p tcp -m tcp --dport 21 -j \ DNAT --to-destination 10.167.141.1 # iptables -t nat -A POSTROUTING -o eth2 -p tcp -m tcp --dport 21 -j \ SNAT --to-source 10.167.141.254 In router, when both dnat and snat are added, nf_nat_setup_info will be called twice. The packet can be dropped at the 2nd time for DNAT due to seqadj ext is already added at the 1st time for SNAT. This patch is to fix it by checking for seqadj ext existence before adding it, so that the packet will not be dropped if seqadj ext already exists. Note that as Florian mentioned, as a long term, we should review ext_add() behaviour, it's better to return a pointer to the existing ext instead. Fixes: 4440a2ab ("netfilter: synproxy: Check oom when adding synproxy and seqadj ct extensions") Reported-by: NLi Shuang <shuali@redhat.com> Acked-by: NFlorian Westphal <fw@strlen.de> Signed-off-by: NXin Long <lucien.xin@gmail.com> Signed-off-by: NPablo Neira Ayuso <pablo@netfilter.org>
-
由 Stefano Brivio 提交于
inet_diag_msg_sctp{,l}addr_fill() and sctp_get_sctp_info() copy sizeof(sockaddr_storage) bytes to fill in sockaddr structs used to export diagnostic information to userspace. However, the memory allocated to store sockaddr information is smaller than that and depends on the address family, so we leak up to 100 uninitialized bytes to userspace. Just use the size of the source structs instead, in all the three cases this is what userspace expects. Zero out the remaining memory. Unused bytes (i.e. when IPv4 addresses are used) in source structs sctp_sockaddr_entry and sctp_transport are already cleared by sctp_add_bind_addr() and sctp_transport_new(), respectively. Noticed while testing KASAN-enabled kernel with 'ss': [ 2326.885243] BUG: KASAN: slab-out-of-bounds in inet_sctp_diag_fill+0x42c/0x6c0 [sctp_diag] at addr ffff881be8779800 [ 2326.896800] Read of size 128 by task ss/9527 [ 2326.901564] CPU: 0 PID: 9527 Comm: ss Not tainted 4.11.0-22.el7a.x86_64 #1 [ 2326.909236] Hardware name: Dell Inc. PowerEdge R730/072T6D, BIOS 2.4.3 01/17/2017 [ 2326.917585] Call Trace: [ 2326.920312] dump_stack+0x63/0x8d [ 2326.924014] kasan_object_err+0x21/0x70 [ 2326.928295] kasan_report+0x288/0x540 [ 2326.932380] ? inet_sctp_diag_fill+0x42c/0x6c0 [sctp_diag] [ 2326.938500] ? skb_put+0x8b/0xd0 [ 2326.942098] ? memset+0x31/0x40 [ 2326.945599] check_memory_region+0x13c/0x1a0 [ 2326.950362] memcpy+0x23/0x50 [ 2326.953669] inet_sctp_diag_fill+0x42c/0x6c0 [sctp_diag] [ 2326.959596] ? inet_diag_msg_sctpasoc_fill+0x460/0x460 [sctp_diag] [ 2326.966495] ? __lock_sock+0x102/0x150 [ 2326.970671] ? sock_def_wakeup+0x60/0x60 [ 2326.975048] ? remove_wait_queue+0xc0/0xc0 [ 2326.979619] sctp_diag_dump+0x44a/0x760 [sctp_diag] [ 2326.985063] ? sctp_ep_dump+0x280/0x280 [sctp_diag] [ 2326.990504] ? memset+0x31/0x40 [ 2326.994007] ? mutex_lock+0x12/0x40 [ 2326.997900] __inet_diag_dump+0x57/0xb0 [inet_diag] [ 2327.003340] ? __sys_sendmsg+0x150/0x150 [ 2327.007715] inet_diag_dump+0x4d/0x80 [inet_diag] [ 2327.012979] netlink_dump+0x1e6/0x490 [ 2327.017064] __netlink_dump_start+0x28e/0x2c0 [ 2327.021924] inet_diag_handler_cmd+0x189/0x1a0 [inet_diag] [ 2327.028045] ? inet_diag_rcv_msg_compat+0x1b0/0x1b0 [inet_diag] [ 2327.034651] ? inet_diag_dump_compat+0x190/0x190 [inet_diag] [ 2327.040965] ? __netlink_lookup+0x1b9/0x260 [ 2327.045631] sock_diag_rcv_msg+0x18b/0x1e0 [ 2327.050199] netlink_rcv_skb+0x14b/0x180 [ 2327.054574] ? sock_diag_bind+0x60/0x60 [ 2327.058850] sock_diag_rcv+0x28/0x40 [ 2327.062837] netlink_unicast+0x2e7/0x3b0 [ 2327.067212] ? netlink_attachskb+0x330/0x330 [ 2327.071975] ? kasan_check_write+0x14/0x20 [ 2327.076544] netlink_sendmsg+0x5be/0x730 [ 2327.080918] ? netlink_unicast+0x3b0/0x3b0 [ 2327.085486] ? kasan_check_write+0x14/0x20 [ 2327.090057] ? selinux_socket_sendmsg+0x24/0x30 [ 2327.095109] ? netlink_unicast+0x3b0/0x3b0 [ 2327.099678] sock_sendmsg+0x74/0x80 [ 2327.103567] ___sys_sendmsg+0x520/0x530 [ 2327.107844] ? __get_locked_pte+0x178/0x200 [ 2327.112510] ? copy_msghdr_from_user+0x270/0x270 [ 2327.117660] ? vm_insert_page+0x360/0x360 [ 2327.122133] ? vm_insert_pfn_prot+0xb4/0x150 [ 2327.126895] ? vm_insert_pfn+0x32/0x40 [ 2327.131077] ? vvar_fault+0x71/0xd0 [ 2327.134968] ? special_mapping_fault+0x69/0x110 [ 2327.140022] ? __do_fault+0x42/0x120 [ 2327.144008] ? __handle_mm_fault+0x1062/0x17a0 [ 2327.148965] ? __fget_light+0xa7/0xc0 [ 2327.153049] __sys_sendmsg+0xcb/0x150 [ 2327.157133] ? __sys_sendmsg+0xcb/0x150 [ 2327.161409] ? SyS_shutdown+0x140/0x140 [ 2327.165688] ? exit_to_usermode_loop+0xd0/0xd0 [ 2327.170646] ? __do_page_fault+0x55d/0x620 [ 2327.175216] ? __sys_sendmsg+0x150/0x150 [ 2327.179591] SyS_sendmsg+0x12/0x20 [ 2327.183384] do_syscall_64+0xe3/0x230 [ 2327.187471] entry_SYSCALL64_slow_path+0x25/0x25 [ 2327.192622] RIP: 0033:0x7f41d18fa3b0 [ 2327.196608] RSP: 002b:00007ffc3b731218 EFLAGS: 00000246 ORIG_RAX: 000000000000002e [ 2327.205055] RAX: ffffffffffffffda RBX: 00007ffc3b731380 RCX: 00007f41d18fa3b0 [ 2327.213017] RDX: 0000000000000000 RSI: 00007ffc3b731340 RDI: 0000000000000003 [ 2327.220978] RBP: 0000000000000002 R08: 0000000000000004 R09: 0000000000000040 [ 2327.228939] R10: 00007ffc3b730f30 R11: 0000000000000246 R12: 0000000000000003 [ 2327.236901] R13: 00007ffc3b731340 R14: 00007ffc3b7313d0 R15: 0000000000000084 [ 2327.244865] Object at ffff881be87797e0, in cache kmalloc-64 size: 64 [ 2327.251953] Allocated: [ 2327.254581] PID = 9484 [ 2327.257215] save_stack_trace+0x1b/0x20 [ 2327.261485] save_stack+0x46/0xd0 [ 2327.265179] kasan_kmalloc+0xad/0xe0 [ 2327.269165] kmem_cache_alloc_trace+0xe6/0x1d0 [ 2327.274138] sctp_add_bind_addr+0x58/0x180 [sctp] [ 2327.279400] sctp_do_bind+0x208/0x310 [sctp] [ 2327.284176] sctp_bind+0x61/0xa0 [sctp] [ 2327.288455] inet_bind+0x5f/0x3a0 [ 2327.292151] SYSC_bind+0x1a4/0x1e0 [ 2327.295944] SyS_bind+0xe/0x10 [ 2327.299349] do_syscall_64+0xe3/0x230 [ 2327.303433] return_from_SYSCALL_64+0x0/0x6a [ 2327.308194] Freed: [ 2327.310434] PID = 4131 [ 2327.313065] save_stack_trace+0x1b/0x20 [ 2327.317344] save_stack+0x46/0xd0 [ 2327.321040] kasan_slab_free+0x73/0xc0 [ 2327.325220] kfree+0x96/0x1a0 [ 2327.328530] dynamic_kobj_release+0x15/0x40 [ 2327.333195] kobject_release+0x99/0x1e0 [ 2327.337472] kobject_put+0x38/0x70 [ 2327.341266] free_notes_attrs+0x66/0x80 [ 2327.345545] mod_sysfs_teardown+0x1a5/0x270 [ 2327.350211] free_module+0x20/0x2a0 [ 2327.354099] SyS_delete_module+0x2cb/0x2f0 [ 2327.358667] do_syscall_64+0xe3/0x230 [ 2327.362750] return_from_SYSCALL_64+0x0/0x6a [ 2327.367510] Memory state around the buggy address: [ 2327.372855] ffff881be8779700: fc fc fc fc 00 00 00 00 00 00 00 00 fc fc fc fc [ 2327.380914] ffff881be8779780: fb fb fb fb fb fb fb fb fc fc fc fc 00 00 00 00 [ 2327.388972] >ffff881be8779800: 00 00 00 00 fc fc fc fc fb fb fb fb fb fb fb fb [ 2327.397031] ^ [ 2327.401792] ffff881be8779880: fc fc fc fc fb fb fb fb fb fb fb fb fc fc fc fc [ 2327.409850] ffff881be8779900: 00 00 00 00 00 04 fc fc fc fc fc fc 00 00 00 00 [ 2327.417907] ================================================================== This fixes CVE-2017-7558. References: https://bugzilla.redhat.com/show_bug.cgi?id=1480266 Fixes: 8f840e47 ("sctp: add the sctp_diag.c file") Cc: Xin Long <lucien.xin@gmail.com> Cc: Vlad Yasevich <vyasevich@gmail.com> Cc: Neil Horman <nhorman@tuxdriver.com> Signed-off-by: NStefano Brivio <sbrivio@redhat.com> Acked-by: NMarcelo Ricardo Leitner <marcelo.leitner@gmail.com> Reviewed-by: NXin Long <lucien.xin@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Eric Dumazet 提交于
Two kfree_skb() should be consume_skb(), to be friend with drop monitor (perf record ... -e skb:kfree_skb) Signed-off-by: NEric Dumazet <edumazet@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Florian Fainelli 提交于
The first call of skb_put_padto() will free up the SKB on error, but we return NULL which tells dsa_slave_xmit() that the original SKB should be freed so this would lead to a double free here. The second skb_put_padto() already frees the passed sk_buff reference upon error, so calling kfree_skb() on it again is not necessary. Detected by CoverityScan, CID#1416687 ("USE_AFTER_FREE") Fixes: e71cb9e0 ("net: dsa: ksz: fix skb freeing") Signed-off-by: NFlorian Fainelli <f.fainelli@gmail.com> Reviewed-by: NWoojung Huh <Woojung.Huh@microchip.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Florian Fainelli 提交于
Rename skb_pad() into __skb_pad() and make it take a third argument: free_on_error which controls whether kfree_skb() should be called or not, skb_pad() directly makes use of it and passes true to preserve its existing behavior. Do exactly the same thing with __skb_put_padto() and skb_put_padto(). Suggested-by: NDavid Miller <davem@davemloft.net> Signed-off-by: NFlorian Fainelli <f.fainelli@gmail.com> Reviewed-by: NWoojung Huh <Woojung.Huh@microchip.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 23 8月, 2017 8 次提交
-
-
由 Jiri Pirko 提交于
tcf_chain_flush needs to be called with RTNL. However, on free_tcf-> tcf_action_goto_chain_fini-> tcf_chain_put-> tcf_chain_destroy-> tcf_chain_flush callpath, it is called without RTNL. This issue was notified by following warning: [ 155.599052] WARNING: suspicious RCU usage [ 155.603165] 4.13.0-rc5jiri+ #54 Not tainted [ 155.607456] ----------------------------- [ 155.611561] net/sched/cls_api.c:195 suspicious rcu_dereference_protected() usage! Since on this callpath, the chain is guaranteed to be already empty by check in tcf_chain_put, move the tcf_chain_flush call out and call it only where it is needed - into tcf_block_put. Fixes: db50514f ("net: sched: add termination action to allow goto chain") Signed-off-by: NJiri Pirko <jiri@mellanox.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Jiri Pirko 提交于
The goto_chain termination action takes a reference of a chain. In that case, there is an issue when block_put is called tcf_chain_destroy directly. The follo-up call of tcf_chain_put by goto_chain action free works with memory that is already freed. This was caught by kasan: [ 220.337908] BUG: KASAN: use-after-free in tcf_chain_put+0x1b/0x50 [ 220.344103] Read of size 4 at addr ffff88036d1f2cec by task systemd-journal/261 [ 220.353047] CPU: 0 PID: 261 Comm: systemd-journal Not tainted 4.13.0-rc5jiri+ #54 [ 220.360661] Hardware name: Mellanox Technologies Ltd. Mellanox switch/Mellanox x86 mezzanine board, BIOS 4.6.5 08/02/2016 [ 220.371784] Call Trace: [ 220.374290] <IRQ> [ 220.376355] dump_stack+0xd5/0x150 [ 220.391485] print_address_description+0x86/0x410 [ 220.396308] kasan_report+0x181/0x4c0 [ 220.415211] tcf_chain_put+0x1b/0x50 [ 220.418949] free_tcf+0x95/0xc0 So allow tcf_chain_destroy to be called multiple times, free only in case the reference count drops to 0. Fixes: 5bc17018 ("net: sched: introduce multichain support for filters") Signed-off-by: NJiri Pirko <jiri@mellanox.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Eric Dumazet 提交于
When peeking, if a bad csum is discovered, the skb is unlinked from the queue with __sk_queue_drop_skb and the peek operation restarted. __sk_queue_drop_skb only drops packets that match the queue head. This fails if the skb was found after the head, using SO_PEEK_OFF socket option. This causes an infinite loop. We MUST drop this problematic skb, and we can simply check if skb was already removed by another thread, by looking at skb->next : This pointer is set to NULL by the __skb_unlink() operation, that might have happened only under the spinlock protection. Many thanks to syzkaller team (and particularly Dmitry Vyukov who provided us nice C reproducers exhibiting the lockup) and Willem de Bruijn who provided first version for this patch and a test program. Fixes: 627d2d6b ("udp: enable MSG_PEEK at non-zero offset") Signed-off-by: NEric Dumazet <edumazet@google.com> Reported-by: NDmitry Vyukov <dvyukov@google.com> Cc: Willem de Bruijn <willemb@google.com> Acked-by: NPaolo Abeni <pabeni@redhat.com> Acked-by: NWillem de Bruijn <willemb@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Ying Xue 提交于
No matter whether a request is inserted into workqueue as a work item to cancel a subscription or to delete a subscription's subscriber asynchronously, the work items may be executed in different workers. As a result, it doesn't mean that one request which is raised prior to another request is definitely handled before the latter. By contrast, if the latter request is executed before the former request, below error may happen: [ 656.183644] BUG: spinlock bad magic on CPU#0, kworker/u8:0/12117 [ 656.184487] general protection fault: 0000 [#1] SMP [ 656.185160] Modules linked in: tipc ip6_udp_tunnel udp_tunnel 9pnet_virtio 9p 9pnet virtio_net virtio_pci virtio_ring virtio [last unloaded: ip6_udp_tunnel] [ 656.187003] CPU: 0 PID: 12117 Comm: kworker/u8:0 Not tainted 4.11.0-rc7+ #6 [ 656.187920] Hardware name: Bochs Bochs, BIOS Bochs 01/01/2011 [ 656.188690] Workqueue: tipc_rcv tipc_recv_work [tipc] [ 656.189371] task: ffff88003f5cec40 task.stack: ffffc90004448000 [ 656.190157] RIP: 0010:spin_bug+0xdd/0xf0 [ 656.190678] RSP: 0018:ffffc9000444bcb8 EFLAGS: 00010202 [ 656.191375] RAX: 0000000000000034 RBX: ffff88003f8d1388 RCX: 0000000000000000 [ 656.192321] RDX: ffff88003ba13708 RSI: ffff88003ba0cd08 RDI: ffff88003ba0cd08 [ 656.193265] RBP: ffffc9000444bcd0 R08: 0000000000000030 R09: 000000006b6b6b6b [ 656.194208] R10: ffff8800bde3e000 R11: 00000000000001b4 R12: 6b6b6b6b6b6b6b6b [ 656.195157] R13: ffffffff81a3ca64 R14: ffff88003f8d1388 R15: ffff88003f8d13a0 [ 656.196101] FS: 0000000000000000(0000) GS:ffff88003ba00000(0000) knlGS:0000000000000000 [ 656.197172] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 656.197935] CR2: 00007f0b3d2e6000 CR3: 000000003ef9e000 CR4: 00000000000006f0 [ 656.198873] Call Trace: [ 656.199210] do_raw_spin_lock+0x66/0xa0 [ 656.199735] _raw_spin_lock_bh+0x19/0x20 [ 656.200258] tipc_subscrb_subscrp_delete+0x28/0xf0 [tipc] [ 656.200990] tipc_subscrb_rcv_cb+0x45/0x260 [tipc] [ 656.201632] tipc_receive_from_sock+0xaf/0x100 [tipc] [ 656.202299] tipc_recv_work+0x2b/0x60 [tipc] [ 656.202872] process_one_work+0x157/0x420 [ 656.203404] worker_thread+0x69/0x4c0 [ 656.203898] kthread+0x138/0x170 [ 656.204328] ? process_one_work+0x420/0x420 [ 656.204889] ? kthread_create_on_node+0x40/0x40 [ 656.205527] ret_from_fork+0x29/0x40 [ 656.206012] Code: 48 8b 0c 25 00 c5 00 00 48 c7 c7 f0 24 a3 81 48 81 c1 f0 05 00 00 65 8b 15 61 ef f5 7e e8 9a 4c 09 00 4d 85 e4 44 8b 4b 08 74 92 <45> 8b 84 24 40 04 00 00 49 8d 8c 24 f0 05 00 00 eb 8d 90 0f 1f [ 656.208504] RIP: spin_bug+0xdd/0xf0 RSP: ffffc9000444bcb8 [ 656.209798] ---[ end trace e2a800e6eb0770be ]--- In above scenario, the request of deleting subscriber was performed earlier than the request of canceling a subscription although the latter was issued before the former, which means tipc_subscrb_delete() was called before tipc_subscrp_cancel(). As a result, when tipc_subscrb_subscrp_delete() called by tipc_subscrp_cancel() was executed to cancel a subscription, the subscription's subscriber refcnt had been decreased to 1. After tipc_subscrp_delete() where the subscriber was freed because its refcnt was decremented to zero, but the subscriber's lock had to be released, as a consequence, panic happened. By contrast, if we increase subscriber's refcnt before tipc_subscrb_subscrp_delete() is called in tipc_subscrp_cancel(), the panic issue can be avoided. Fixes: d094c4d5 ("tipc: add subscription refcount to avoid invalid delete") Reported-by: NParthasarathy Bhuvaragan <parthasarathy.bhuvaragan@ericsson.com> Signed-off-by: NYing Xue <ying.xue@windriver.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Parthasarathy Bhuvaragan 提交于
In commit, 139bb36f ("tipc: advance the time of deleting subscription from subscriber->subscrp_list"), we delete the subscription from the subscribers list and from nametable unconditionally. This leads to the following bug if the timer running tipc_subscrp_timeout() in another CPU accesses the subscription list after the subscription delete request. [39.570] general protection fault: 0000 [#1] SMP :: [39.574] task: ffffffff81c10540 task.stack: ffffffff81c00000 [39.575] RIP: 0010:tipc_subscrp_timeout+0x32/0x80 [tipc] [39.576] RSP: 0018:ffff88003ba03e90 EFLAGS: 00010282 [39.576] RAX: dead000000000200 RBX: ffff88003f0f3600 RCX: 0000000000000101 [39.577] RDX: dead000000000100 RSI: 0000000000000201 RDI: ffff88003f0d7948 [39.578] RBP: ffff88003ba03ea0 R08: 0000000000000001 R09: ffff88003ba03ef8 [39.579] R10: 000000000000014f R11: 0000000000000000 R12: ffff88003f0d7948 [39.580] R13: ffff88003f0f3618 R14: ffffffffa006c250 R15: ffff88003f0f3600 [39.581] FS: 0000000000000000(0000) GS:ffff88003ba00000(0000) knlGS:0000000000000000 [39.582] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [39.583] CR2: 00007f831c6e0714 CR3: 000000003d3b0000 CR4: 00000000000006f0 [39.584] Call Trace: [39.584] <IRQ> [39.585] call_timer_fn+0x3d/0x180 [39.585] ? tipc_subscrb_rcv_cb+0x260/0x260 [tipc] [39.586] run_timer_softirq+0x168/0x1f0 [39.586] ? sched_clock_cpu+0x16/0xc0 [39.587] __do_softirq+0x9b/0x2de [39.587] irq_exit+0x60/0x70 [39.588] smp_apic_timer_interrupt+0x3d/0x50 [39.588] apic_timer_interrupt+0x86/0x90 [39.589] RIP: 0010:default_idle+0x20/0xf0 [39.589] RSP: 0018:ffffffff81c03e58 EFLAGS: 00000246 ORIG_RAX: ffffffffffffff10 [39.590] RAX: 0000000000000000 RBX: ffffffff81c10540 RCX: 0000000000000000 [39.591] RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000000 [39.592] RBP: ffffffff81c03e68 R08: 0000000000000000 R09: 0000000000000000 [39.593] R10: ffffc90001cbbe00 R11: 0000000000000000 R12: 0000000000000000 [39.594] R13: ffffffff81c10540 R14: 0000000000000000 R15: 0000000000000000 [39.595] </IRQ> :: [39.603] RIP: tipc_subscrp_timeout+0x32/0x80 [tipc] RSP: ffff88003ba03e90 [39.604] ---[ end trace 79ce94b7216cb459 ]--- Fixes: 139bb36f ("tipc: advance the time of deleting subscription from subscriber->subscrp_list") Signed-off-by: NParthasarathy Bhuvaragan <parthasarathy.bhuvaragan@ericsson.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Florian Fainelli 提交于
skb_put_padto() will free the sk_buff passed as reference in case of errors, but we still need to check its return value and decide what to do. Detected by CoverityScan, CID#1416688 ("CHECKED_RETURN") Fixes: ee1c2797 ("net/hsr: Added support for HSR v1") Signed-off-by: NFlorian Fainelli <f.fainelli@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Wei Wang 提交于
We currently keep rt->rt6i_node pointing to the fib6_node for the route. And some functions make use of this pointer to dereference the fib6_node from rt structure, e.g. rt6_check(). However, as there is neither refcount nor rcu taken when dereferencing rt->rt6i_node, it could potentially cause crashes as rt->rt6i_node could be set to NULL by other CPUs when doing a route deletion. This patch introduces an rcu grace period before freeing fib6_node and makes sure the functions that dereference it takes rcu_read_lock(). Note: there is no "Fixes" tag because this bug was there in a very early stage. Signed-off-by: NWei Wang <weiwan@google.com> Acked-by: NEric Dumazet <edumazet@google.com> Acked-by: NMartin KaFai Lau <kafai@fb.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Stefano Brivio 提交于
A packet length of exactly IPV6_MAXPLEN is allowed, we should refuse parsing options only if the size is 64KiB or more. While at it, remove one extra variable and one assignment which were also introduced by the commit that introduced the size check. Checking the sum 'offset + len' and only later adding 'len' to 'offset' doesn't provide any advantage over directly summing to 'offset' and checking it. Fixes: 6399f1fa ("ipv6: avoid overflow of offset in ip6_find_1stfragopt") Signed-off-by: NStefano Brivio <sbrivio@redhat.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 21 8月, 2017 1 次提交
-
-
由 Wei Wang 提交于
In fib6_add(), it is possible that fib6_add_1() picks an intermediate node and sets the node's fn->leaf to NULL in order to add this new route. However, if fib6_add_rt2node() fails to add the new route for some reason, fn->leaf will be left as NULL and could potentially cause crash when fn->leaf is accessed in fib6_locate(). This patch makes sure fib6_repair_tree() is called to properly repair fn->leaf in the above failure case. Here is the syzkaller reported general protection fault in fib6_locate: kasan: CONFIG_KASAN_INLINE enabled kasan: GPF could be caused by NULL-ptr deref or user memory access general protection fault: 0000 [#1] SMP KASAN Modules linked in: CPU: 0 PID: 40937 Comm: syz-executor3 Not tainted Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 task: ffff8801d7d64100 ti: ffff8801d01a0000 task.ti: ffff8801d01a0000 RIP: 0010:[<ffffffff82a3e0e1>] [<ffffffff82a3e0e1>] __ipv6_prefix_equal64_half include/net/ipv6.h:475 [inline] RIP: 0010:[<ffffffff82a3e0e1>] [<ffffffff82a3e0e1>] ipv6_prefix_equal include/net/ipv6.h:492 [inline] RIP: 0010:[<ffffffff82a3e0e1>] [<ffffffff82a3e0e1>] fib6_locate_1 net/ipv6/ip6_fib.c:1210 [inline] RIP: 0010:[<ffffffff82a3e0e1>] [<ffffffff82a3e0e1>] fib6_locate+0x281/0x3c0 net/ipv6/ip6_fib.c:1233 RSP: 0018:ffff8801d01a36a8 EFLAGS: 00010202 RAX: 0000000000000020 RBX: ffff8801bc790e00 RCX: ffffc90002983000 RDX: 0000000000001219 RSI: ffff8801d01a37a0 RDI: 0000000000000100 RBP: ffff8801d01a36f0 R08: 00000000000000ff R09: 0000000000000000 R10: 0000000000000003 R11: 0000000000000000 R12: 0000000000000001 R13: dffffc0000000000 R14: ffff8801d01a37a0 R15: 0000000000000000 FS: 00007f6afd68c700(0000) GS:ffff8801db400000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00000000004c6340 CR3: 00000000ba41f000 CR4: 00000000001426f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Stack: ffff8801d01a37a8 ffff8801d01a3780 ffffed003a0346f5 0000000c82a23ea0 ffff8800b7bd7700 ffff8801d01a3780 ffff8800b6a1c940 ffffffff82a23ea0 ffff8801d01a3920 ffff8801d01a3748 ffffffff82a223d6 ffff8801d7d64988 Call Trace: [<ffffffff82a223d6>] ip6_route_del+0x106/0x570 net/ipv6/route.c:2109 [<ffffffff82a23f9d>] inet6_rtm_delroute+0xfd/0x100 net/ipv6/route.c:3075 [<ffffffff82621359>] rtnetlink_rcv_msg+0x549/0x7a0 net/core/rtnetlink.c:3450 [<ffffffff8274c1d1>] netlink_rcv_skb+0x141/0x370 net/netlink/af_netlink.c:2281 [<ffffffff82613ddf>] rtnetlink_rcv+0x2f/0x40 net/core/rtnetlink.c:3456 [<ffffffff8274ad38>] netlink_unicast_kernel net/netlink/af_netlink.c:1206 [inline] [<ffffffff8274ad38>] netlink_unicast+0x518/0x750 net/netlink/af_netlink.c:1232 [<ffffffff8274b83e>] netlink_sendmsg+0x8ce/0xc30 net/netlink/af_netlink.c:1778 [<ffffffff82564aff>] sock_sendmsg_nosec net/socket.c:609 [inline] [<ffffffff82564aff>] sock_sendmsg+0xcf/0x110 net/socket.c:619 [<ffffffff82564d62>] sock_write_iter+0x222/0x3a0 net/socket.c:834 [<ffffffff8178523d>] new_sync_write+0x1dd/0x2b0 fs/read_write.c:478 [<ffffffff817853f4>] __vfs_write+0xe4/0x110 fs/read_write.c:491 [<ffffffff81786c38>] vfs_write+0x178/0x4b0 fs/read_write.c:538 [<ffffffff817892a9>] SYSC_write fs/read_write.c:585 [inline] [<ffffffff817892a9>] SyS_write+0xd9/0x1b0 fs/read_write.c:577 [<ffffffff82c71e32>] entry_SYSCALL_64_fastpath+0x12/0x17 Note: there is no "Fixes" tag as this seems to be a bug introduced very early. Signed-off-by: NWei Wang <weiwan@google.com> Acked-by: NEric Dumazet <edumazet@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 19 8月, 2017 10 次提交
-
-
由 Xin Long 提交于
As we know in some target's checkentry it may dereference par.entryinfo to check entry stuff inside. But when sched action calls xt_check_target, par.entryinfo is set with NULL. It would cause kernel panic when calling some targets. It can be reproduce with: # tc qd add dev eth1 ingress handle ffff: # tc filter add dev eth1 parent ffff: u32 match u32 0 0 action xt \ -j ECN --ecn-tcp-remove It could also crash kernel when using target CLUSTERIP or TPROXY. By now there's no proper value for par.entryinfo in ipt_init_target, but it can not be set with NULL. This patch is to void all these panics by setting it with an ipt_entry obj with all members = 0. Note that this issue has been there since the very beginning. Signed-off-by: NXin Long <lucien.xin@gmail.com> Acked-by: NPablo Neira Ayuso <pablo@netfilter.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David Howells 提交于
rxrpc_service_prealloc_one() doesn't set the socket pointer on any new call it preallocates, but does add it to the rxrpc net namespace call list. This, however, causes rxrpc_put_call() to oops when the call is discarded when the socket is closed. rxrpc_put_call() needs the socket to be able to reach the namespace so that it can use a lock held therein. Fix this by setting a call's socket pointer immediately before discarding it. This can be triggered by unloading the kafs module, resulting in an oops like the following: BUG: unable to handle kernel NULL pointer dereference at 0000000000000030 IP: rxrpc_put_call+0x1e2/0x32d PGD 0 P4D 0 Oops: 0000 [#1] SMP Modules linked in: kafs(E-) CPU: 3 PID: 3037 Comm: rmmod Tainted: G E 4.12.0-fscache+ #213 Hardware name: ASUS All Series/H97-PLUS, BIOS 2306 10/09/2014 task: ffff8803fc92e2c0 task.stack: ffff8803fef74000 RIP: 0010:rxrpc_put_call+0x1e2/0x32d RSP: 0018:ffff8803fef77e08 EFLAGS: 00010282 RAX: 0000000000000000 RBX: ffff8803fab99ac0 RCX: 000000000000000f RDX: ffffffff81c50a40 RSI: 000000000000000c RDI: ffff8803fc92ea88 RBP: ffff8803fef77e30 R08: ffff8803fc87b941 R09: ffffffff82946d20 R10: ffff8803fef77d10 R11: 00000000000076fc R12: 0000000000000005 R13: ffff8803fab99c20 R14: 0000000000000001 R15: ffffffff816c6aee FS: 00007f915a059700(0000) GS:ffff88041fb80000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000030 CR3: 00000003fef39000 CR4: 00000000001406e0 Call Trace: rxrpc_discard_prealloc+0x325/0x341 rxrpc_listen+0xf9/0x146 kernel_listen+0xb/0xd afs_close_socket+0x3e/0x173 [kafs] afs_exit+0x1f/0x57 [kafs] SyS_delete_module+0x10f/0x19a do_syscall_64+0x8a/0x149 entry_SYSCALL64_slow_path+0x25/0x25 Fixes: 2baec2c3 ("rxrpc: Support network namespacing") Signed-off-by: NDavid Howells <dhowells@redhat.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Colin Ian King 提交于
list.dev has not been initialized and so the copy_to_user is copying data from the stack back to user space which is a potential information leak. Fix this ensuring all of list is initialized to zero. Detected by CoverityScan, CID#1357894 ("Uninitialized scalar variable") Signed-off-by: NColin Ian King <colin.king@canonical.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Neal Cardwell 提交于
In some situations tcp_send_loss_probe() can realize that it's unable to send a loss probe (TLP), and falls back to calling tcp_rearm_rto() to schedule an RTO timer. In such cases, sometimes tcp_rearm_rto() realizes that the RTO was eligible to fire immediately or at some point in the past (delta_us <= 0). Previously in such cases tcp_rearm_rto() was scheduling such "overdue" RTOs to happen at now + icsk_rto, which caused needless delays of hundreds of milliseconds (and non-linear behavior that made reproducible testing difficult). This commit changes the logic to schedule "overdue" RTOs ASAP, rather than at now + icsk_rto. Fixes: 6ba8a3b1 ("tcp: Tail loss probe (TLP)") Suggested-by: NYuchung Cheng <ycheng@google.com> Signed-off-by: NNeal Cardwell <ncardwell@google.com> Signed-off-by: NYuchung Cheng <ycheng@google.com> Signed-off-by: NEric Dumazet <edumazet@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Roopa Prabhu 提交于
Syzkaller hit 'general protection fault in fib_dump_info' bug on commit 4.13-rc5.. Guilty file: net/ipv4/fib_semantics.c kasan: GPF could be caused by NULL-ptr deref or user memory access general protection fault: 0000 [#1] SMP KASAN Modules linked in: CPU: 0 PID: 2808 Comm: syz-executor0 Not tainted 4.13.0-rc5 #1 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Ubuntu-1.8.2-1ubuntu1 04/01/2014 task: ffff880078562700 task.stack: ffff880078110000 RIP: 0010:fib_dump_info+0x388/0x1170 net/ipv4/fib_semantics.c:1314 RSP: 0018:ffff880078117010 EFLAGS: 00010206 RAX: dffffc0000000000 RBX: 00000000000000fe RCX: 0000000000000002 RDX: 0000000000000006 RSI: ffff880078117084 RDI: 0000000000000030 RBP: ffff880078117268 R08: 000000000000000c R09: ffff8800780d80c8 R10: 0000000058d629b4 R11: 0000000067fce681 R12: 0000000000000000 R13: ffff8800784bd540 R14: ffff8800780d80b5 R15: ffff8800780d80a4 FS: 00000000022fa940(0000) GS:ffff88007fc00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00000000004387d0 CR3: 0000000079135000 CR4: 00000000000006f0 Call Trace: inet_rtm_getroute+0xc89/0x1f50 net/ipv4/route.c:2766 rtnetlink_rcv_msg+0x288/0x680 net/core/rtnetlink.c:4217 netlink_rcv_skb+0x340/0x470 net/netlink/af_netlink.c:2397 rtnetlink_rcv+0x28/0x30 net/core/rtnetlink.c:4223 netlink_unicast_kernel net/netlink/af_netlink.c:1265 [inline] netlink_unicast+0x4c4/0x6e0 net/netlink/af_netlink.c:1291 netlink_sendmsg+0x8c4/0xca0 net/netlink/af_netlink.c:1854 sock_sendmsg_nosec net/socket.c:633 [inline] sock_sendmsg+0xca/0x110 net/socket.c:643 ___sys_sendmsg+0x779/0x8d0 net/socket.c:2035 __sys_sendmsg+0xd1/0x170 net/socket.c:2069 SYSC_sendmsg net/socket.c:2080 [inline] SyS_sendmsg+0x2d/0x50 net/socket.c:2076 entry_SYSCALL_64_fastpath+0x1a/0xa5 RIP: 0033:0x4512e9 RSP: 002b:00007ffc75584cc8 EFLAGS: 00000216 ORIG_RAX: 000000000000002e RAX: ffffffffffffffda RBX: 0000000000000002 RCX: 00000000004512e9 RDX: 0000000000000000 RSI: 0000000020f2cfc8 RDI: 0000000000000003 RBP: 000000000000000e R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000216 R12: fffffffffffffffe R13: 0000000000718000 R14: 0000000020c44ff0 R15: 0000000000000000 Code: 00 0f b6 8d ec fd ff ff 48 8b 85 f0 fd ff ff 88 48 17 48 8b 45 28 48 8d 78 30 48 b8 00 00 00 00 00 fc ff df 48 89 fa 48 c1 ea 03 <0f> b6 04 02 84 c0 74 08 3c 03 0f 8e cb 0c 00 00 48 8b 45 28 44 RIP: fib_dump_info+0x388/0x1170 net/ipv4/fib_semantics.c:1314 RSP: ffff880078117010 ---[ end trace 254a7af28348f88b ]--- This patch adds a res->fi NULL check. example run: $ip route get 0.0.0.0 iif virt1-0 broadcast 0.0.0.0 dev lo cache <local,brd> iif virt1-0 $ip route get 0.0.0.0 iif virt1-0 fibmatch RTNETLINK answers: No route to host Reported-by: Nidaifish <idaifish@gmail.com> Reported-by: NDmitry Vyukov <dvyukov@google.com> Fixes: b6179813 ("net: ipv4: RTM_GETROUTE: return matched fib result when requested") Signed-off-by: NRoopa Prabhu <roopa@cumulusnetworks.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Wei Wang 提交于
syzcaller reported the following use-after-free issue in rt6_select(): BUG: KASAN: use-after-free in rt6_select net/ipv6/route.c:755 [inline] at addr ffff8800bc6994e8 BUG: KASAN: use-after-free in ip6_pol_route.isra.46+0x1429/0x1470 net/ipv6/route.c:1084 at addr ffff8800bc6994e8 Read of size 4 by task syz-executor1/439628 CPU: 0 PID: 439628 Comm: syz-executor1 Not tainted 4.3.5+ #8 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 0000000000000000 ffff88018fe435b0 ffffffff81ca384d ffff8801d3588c00 ffff8800bc699380 ffff8800bc699500 dffffc0000000000 ffff8801d40a47c0 ffff88018fe435d8 ffffffff81735751 ffff88018fe43660 ffff8800bc699380 Call Trace: [<ffffffff81ca384d>] __dump_stack lib/dump_stack.c:15 [inline] [<ffffffff81ca384d>] dump_stack+0xc1/0x124 lib/dump_stack.c:51 sctp: [Deprecated]: syz-executor0 (pid 439615) Use of struct sctp_assoc_value in delayed_ack socket option. Use struct sctp_sack_info instead [<ffffffff81735751>] kasan_object_err+0x21/0x70 mm/kasan/report.c:158 [<ffffffff817359c4>] print_address_description mm/kasan/report.c:196 [inline] [<ffffffff817359c4>] kasan_report_error+0x1b4/0x4a0 mm/kasan/report.c:285 [<ffffffff81735d93>] kasan_report mm/kasan/report.c:305 [inline] [<ffffffff81735d93>] __asan_report_load4_noabort+0x43/0x50 mm/kasan/report.c:325 [<ffffffff82a28e39>] rt6_select net/ipv6/route.c:755 [inline] [<ffffffff82a28e39>] ip6_pol_route.isra.46+0x1429/0x1470 net/ipv6/route.c:1084 [<ffffffff82a28fb1>] ip6_pol_route_output+0x81/0xb0 net/ipv6/route.c:1203 [<ffffffff82ab0a50>] fib6_rule_action+0x1f0/0x680 net/ipv6/fib6_rules.c:95 [<ffffffff8265cbb6>] fib_rules_lookup+0x2a6/0x7a0 net/core/fib_rules.c:223 [<ffffffff82ab1430>] fib6_rule_lookup+0xd0/0x250 net/ipv6/fib6_rules.c:41 [<ffffffff82a22006>] ip6_route_output+0x1d6/0x2c0 net/ipv6/route.c:1224 [<ffffffff829e83d2>] ip6_dst_lookup_tail+0x4d2/0x890 net/ipv6/ip6_output.c:943 [<ffffffff829e889a>] ip6_dst_lookup_flow+0x9a/0x250 net/ipv6/ip6_output.c:1079 [<ffffffff82a9f7d8>] ip6_datagram_dst_update+0x538/0xd40 net/ipv6/datagram.c:91 [<ffffffff82aa0978>] __ip6_datagram_connect net/ipv6/datagram.c:251 [inline] [<ffffffff82aa0978>] ip6_datagram_connect+0x518/0xe50 net/ipv6/datagram.c:272 [<ffffffff82aa1313>] ip6_datagram_connect_v6_only+0x63/0x90 net/ipv6/datagram.c:284 [<ffffffff8292f790>] inet_dgram_connect+0x170/0x1f0 net/ipv4/af_inet.c:564 [<ffffffff82565547>] SYSC_connect+0x1a7/0x2f0 net/socket.c:1582 [<ffffffff8256a649>] SyS_connect+0x29/0x30 net/socket.c:1563 [<ffffffff82c72032>] entry_SYSCALL_64_fastpath+0x12/0x17 Object at ffff8800bc699380, in cache ip6_dst_cache size: 384 The root cause of it is that in fib6_add_rt2node(), when it replaces an existing route with the new one, it does not update fn->rr_ptr. This commit resets fn->rr_ptr to NULL when it points to a route which is replaced in fib6_add_rt2node(). Fixes: 27596472 ("ipv6: fix ECMP route replacement") Signed-off-by: NWei Wang <weiwan@google.com> Acked-by: NEric Dumazet <edumazet@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Alexander Potapenko 提交于
KMSAN reported use of uninitialized sctp_addr->v4.sin_addr.s_addr and sctp_addr->v6.sin6_scope_id in sctp_v6_cmp_addr() (see below). Make sure all fields of an IPv6 address are initialized, which guarantees that the IPv4 fields are also initialized. ================================================================== BUG: KMSAN: use of uninitialized memory in sctp_v6_cmp_addr+0x8d4/0x9f0 net/sctp/ipv6.c:517 CPU: 2 PID: 31056 Comm: syz-executor1 Not tainted 4.11.0-rc5+ #2944 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Bochs 01/01/2011 Call Trace: dump_stack+0x172/0x1c0 lib/dump_stack.c:42 is_logbuf_locked mm/kmsan/kmsan.c:59 [inline] kmsan_report+0x12a/0x180 mm/kmsan/kmsan.c:938 native_save_fl arch/x86/include/asm/irqflags.h:18 [inline] arch_local_save_flags arch/x86/include/asm/irqflags.h:72 [inline] arch_local_irq_save arch/x86/include/asm/irqflags.h:113 [inline] __msan_warning_32+0x61/0xb0 mm/kmsan/kmsan_instr.c:467 sctp_v6_cmp_addr+0x8d4/0x9f0 net/sctp/ipv6.c:517 sctp_v6_get_dst+0x8c7/0x1630 net/sctp/ipv6.c:290 sctp_transport_route+0x101/0x570 net/sctp/transport.c:292 sctp_assoc_add_peer+0x66d/0x16f0 net/sctp/associola.c:651 sctp_sendmsg+0x35a5/0x4f90 net/sctp/socket.c:1871 inet_sendmsg+0x498/0x670 net/ipv4/af_inet.c:762 sock_sendmsg_nosec net/socket.c:633 [inline] sock_sendmsg net/socket.c:643 [inline] SYSC_sendto+0x608/0x710 net/socket.c:1696 SyS_sendto+0x8a/0xb0 net/socket.c:1664 entry_SYSCALL_64_fastpath+0x13/0x94 RIP: 0033:0x44b479 RSP: 002b:00007f6213f21c08 EFLAGS: 00000286 ORIG_RAX: 000000000000002c RAX: ffffffffffffffda RBX: 0000000020000000 RCX: 000000000044b479 RDX: 0000000000000041 RSI: 0000000020edd000 RDI: 0000000000000006 RBP: 00000000007080a8 R08: 0000000020b85fe4 R09: 000000000000001c R10: 0000000000040005 R11: 0000000000000286 R12: 00000000ffffffff R13: 0000000000003760 R14: 00000000006e5820 R15: 0000000000ff8000 origin description: ----dst_saddr@sctp_v6_get_dst local variable created at: sk_fullsock include/net/sock.h:2321 [inline] inet6_sk include/linux/ipv6.h:309 [inline] sctp_v6_get_dst+0x91/0x1630 net/sctp/ipv6.c:241 sctp_transport_route+0x101/0x570 net/sctp/transport.c:292 ================================================================== BUG: KMSAN: use of uninitialized memory in sctp_v6_cmp_addr+0x8d4/0x9f0 net/sctp/ipv6.c:517 CPU: 2 PID: 31056 Comm: syz-executor1 Not tainted 4.11.0-rc5+ #2944 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Bochs 01/01/2011 Call Trace: dump_stack+0x172/0x1c0 lib/dump_stack.c:42 is_logbuf_locked mm/kmsan/kmsan.c:59 [inline] kmsan_report+0x12a/0x180 mm/kmsan/kmsan.c:938 native_save_fl arch/x86/include/asm/irqflags.h:18 [inline] arch_local_save_flags arch/x86/include/asm/irqflags.h:72 [inline] arch_local_irq_save arch/x86/include/asm/irqflags.h:113 [inline] __msan_warning_32+0x61/0xb0 mm/kmsan/kmsan_instr.c:467 sctp_v6_cmp_addr+0x8d4/0x9f0 net/sctp/ipv6.c:517 sctp_v6_get_dst+0x8c7/0x1630 net/sctp/ipv6.c:290 sctp_transport_route+0x101/0x570 net/sctp/transport.c:292 sctp_assoc_add_peer+0x66d/0x16f0 net/sctp/associola.c:651 sctp_sendmsg+0x35a5/0x4f90 net/sctp/socket.c:1871 inet_sendmsg+0x498/0x670 net/ipv4/af_inet.c:762 sock_sendmsg_nosec net/socket.c:633 [inline] sock_sendmsg net/socket.c:643 [inline] SYSC_sendto+0x608/0x710 net/socket.c:1696 SyS_sendto+0x8a/0xb0 net/socket.c:1664 entry_SYSCALL_64_fastpath+0x13/0x94 RIP: 0033:0x44b479 RSP: 002b:00007f6213f21c08 EFLAGS: 00000286 ORIG_RAX: 000000000000002c RAX: ffffffffffffffda RBX: 0000000020000000 RCX: 000000000044b479 RDX: 0000000000000041 RSI: 0000000020edd000 RDI: 0000000000000006 RBP: 00000000007080a8 R08: 0000000020b85fe4 R09: 000000000000001c R10: 0000000000040005 R11: 0000000000000286 R12: 00000000ffffffff R13: 0000000000003760 R14: 00000000006e5820 R15: 0000000000ff8000 origin description: ----dst_saddr@sctp_v6_get_dst local variable created at: sk_fullsock include/net/sock.h:2321 [inline] inet6_sk include/linux/ipv6.h:309 [inline] sctp_v6_get_dst+0x91/0x1630 net/sctp/ipv6.c:241 sctp_transport_route+0x101/0x570 net/sctp/transport.c:292 ================================================================== Signed-off-by: NAlexander Potapenko <glider@google.com> Reviewed-by: NXin Long <lucien.xin@gmail.com> Acked-by: NMarcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Eric Dumazet 提交于
syszkaller reported use-after-free in tipc [1] When msg->rep skb is freed, set the pointer to NULL, so that caller does not free it again. [1] ================================================================== BUG: KASAN: use-after-free in skb_push+0xd4/0xe0 net/core/skbuff.c:1466 Read of size 8 at addr ffff8801c6e71e90 by task syz-executor5/4115 CPU: 1 PID: 4115 Comm: syz-executor5 Not tainted 4.13.0-rc4+ #32 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: __dump_stack lib/dump_stack.c:16 [inline] dump_stack+0x194/0x257 lib/dump_stack.c:52 print_address_description+0x73/0x250 mm/kasan/report.c:252 kasan_report_error mm/kasan/report.c:351 [inline] kasan_report+0x24e/0x340 mm/kasan/report.c:409 __asan_report_load8_noabort+0x14/0x20 mm/kasan/report.c:430 skb_push+0xd4/0xe0 net/core/skbuff.c:1466 tipc_nl_compat_recv+0x833/0x18f0 net/tipc/netlink_compat.c:1209 genl_family_rcv_msg+0x7b7/0xfb0 net/netlink/genetlink.c:598 genl_rcv_msg+0xb2/0x140 net/netlink/genetlink.c:623 netlink_rcv_skb+0x216/0x440 net/netlink/af_netlink.c:2397 genl_rcv+0x28/0x40 net/netlink/genetlink.c:634 netlink_unicast_kernel net/netlink/af_netlink.c:1265 [inline] netlink_unicast+0x4e8/0x6f0 net/netlink/af_netlink.c:1291 netlink_sendmsg+0xa4a/0xe60 net/netlink/af_netlink.c:1854 sock_sendmsg_nosec net/socket.c:633 [inline] sock_sendmsg+0xca/0x110 net/socket.c:643 sock_write_iter+0x31a/0x5d0 net/socket.c:898 call_write_iter include/linux/fs.h:1743 [inline] new_sync_write fs/read_write.c:457 [inline] __vfs_write+0x684/0x970 fs/read_write.c:470 vfs_write+0x189/0x510 fs/read_write.c:518 SYSC_write fs/read_write.c:565 [inline] SyS_write+0xef/0x220 fs/read_write.c:557 entry_SYSCALL_64_fastpath+0x1f/0xbe RIP: 0033:0x4512e9 RSP: 002b:00007f3bc8184c08 EFLAGS: 00000216 ORIG_RAX: 0000000000000001 RAX: ffffffffffffffda RBX: 0000000000718000 RCX: 00000000004512e9 RDX: 0000000000000020 RSI: 0000000020fdb000 RDI: 0000000000000006 RBP: 0000000000000086 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000216 R12: 00000000004b5e76 R13: 00007f3bc8184b48 R14: 00000000004b5e86 R15: 0000000000000000 Allocated by task 4115: save_stack_trace+0x16/0x20 arch/x86/kernel/stacktrace.c:59 save_stack+0x43/0xd0 mm/kasan/kasan.c:447 set_track mm/kasan/kasan.c:459 [inline] kasan_kmalloc+0xad/0xe0 mm/kasan/kasan.c:551 kasan_slab_alloc+0x12/0x20 mm/kasan/kasan.c:489 kmem_cache_alloc_node+0x13d/0x750 mm/slab.c:3651 __alloc_skb+0xf1/0x740 net/core/skbuff.c:219 alloc_skb include/linux/skbuff.h:903 [inline] tipc_tlv_alloc+0x26/0xb0 net/tipc/netlink_compat.c:148 tipc_nl_compat_dumpit+0xf2/0x3c0 net/tipc/netlink_compat.c:248 tipc_nl_compat_handle net/tipc/netlink_compat.c:1130 [inline] tipc_nl_compat_recv+0x756/0x18f0 net/tipc/netlink_compat.c:1199 genl_family_rcv_msg+0x7b7/0xfb0 net/netlink/genetlink.c:598 genl_rcv_msg+0xb2/0x140 net/netlink/genetlink.c:623 netlink_rcv_skb+0x216/0x440 net/netlink/af_netlink.c:2397 genl_rcv+0x28/0x40 net/netlink/genetlink.c:634 netlink_unicast_kernel net/netlink/af_netlink.c:1265 [inline] netlink_unicast+0x4e8/0x6f0 net/netlink/af_netlink.c:1291 netlink_sendmsg+0xa4a/0xe60 net/netlink/af_netlink.c:1854 sock_sendmsg_nosec net/socket.c:633 [inline] sock_sendmsg+0xca/0x110 net/socket.c:643 sock_write_iter+0x31a/0x5d0 net/socket.c:898 call_write_iter include/linux/fs.h:1743 [inline] new_sync_write fs/read_write.c:457 [inline] __vfs_write+0x684/0x970 fs/read_write.c:470 vfs_write+0x189/0x510 fs/read_write.c:518 SYSC_write fs/read_write.c:565 [inline] SyS_write+0xef/0x220 fs/read_write.c:557 entry_SYSCALL_64_fastpath+0x1f/0xbe Freed by task 4115: save_stack_trace+0x16/0x20 arch/x86/kernel/stacktrace.c:59 save_stack+0x43/0xd0 mm/kasan/kasan.c:447 set_track mm/kasan/kasan.c:459 [inline] kasan_slab_free+0x71/0xc0 mm/kasan/kasan.c:524 __cache_free mm/slab.c:3503 [inline] kmem_cache_free+0x77/0x280 mm/slab.c:3763 kfree_skbmem+0x1a1/0x1d0 net/core/skbuff.c:622 __kfree_skb net/core/skbuff.c:682 [inline] kfree_skb+0x165/0x4c0 net/core/skbuff.c:699 tipc_nl_compat_dumpit+0x36a/0x3c0 net/tipc/netlink_compat.c:260 tipc_nl_compat_handle net/tipc/netlink_compat.c:1130 [inline] tipc_nl_compat_recv+0x756/0x18f0 net/tipc/netlink_compat.c:1199 genl_family_rcv_msg+0x7b7/0xfb0 net/netlink/genetlink.c:598 genl_rcv_msg+0xb2/0x140 net/netlink/genetlink.c:623 netlink_rcv_skb+0x216/0x440 net/netlink/af_netlink.c:2397 genl_rcv+0x28/0x40 net/netlink/genetlink.c:634 netlink_unicast_kernel net/netlink/af_netlink.c:1265 [inline] netlink_unicast+0x4e8/0x6f0 net/netlink/af_netlink.c:1291 netlink_sendmsg+0xa4a/0xe60 net/netlink/af_netlink.c:1854 sock_sendmsg_nosec net/socket.c:633 [inline] sock_sendmsg+0xca/0x110 net/socket.c:643 sock_write_iter+0x31a/0x5d0 net/socket.c:898 call_write_iter include/linux/fs.h:1743 [inline] new_sync_write fs/read_write.c:457 [inline] __vfs_write+0x684/0x970 fs/read_write.c:470 vfs_write+0x189/0x510 fs/read_write.c:518 SYSC_write fs/read_write.c:565 [inline] SyS_write+0xef/0x220 fs/read_write.c:557 entry_SYSCALL_64_fastpath+0x1f/0xbe The buggy address belongs to the object at ffff8801c6e71dc0 which belongs to the cache skbuff_head_cache of size 224 The buggy address is located 208 bytes inside of 224-byte region [ffff8801c6e71dc0, ffff8801c6e71ea0) The buggy address belongs to the page: page:ffffea00071b9c40 count:1 mapcount:0 mapping:ffff8801c6e71000 index:0x0 flags: 0x200000000000100(slab) raw: 0200000000000100 ffff8801c6e71000 0000000000000000 000000010000000c raw: ffffea0007224a20 ffff8801d98caf48 ffff8801d9e79040 0000000000000000 page dumped because: kasan: bad access detected Memory state around the buggy address: ffff8801c6e71d80: fc fc fc fc fc fc fc fc fb fb fb fb fb fb fb fb ffff8801c6e71e00: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb >ffff8801c6e71e80: fb fb fb fb fc fc fc fc fc fc fc fc fc fc fc fc ^ ffff8801c6e71f00: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc ffff8801c6e71f80: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc ================================================================== Signed-off-by: NEric Dumazet <edumazet@google.com> Reported-by: NDmitry Vyukov <dvyukov@google.com> Cc: Jon Maloy <jon.maloy@ericsson.com> Cc: Ying Xue <ying.xue@windriver.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Matthew Dawson 提交于
Due to commit e6afc8ac ("udp: remove headers from UDP packets before queueing"), when udp packets are being peeked the requested extra offset is always 0 as there is no need to skip the udp header. However, when the offset is 0 and the next skb is of length 0, it is only returned once. The behaviour can be seen with the following python script: from socket import *; f=socket(AF_INET6, SOCK_DGRAM | SOCK_NONBLOCK, 0); g=socket(AF_INET6, SOCK_DGRAM | SOCK_NONBLOCK, 0); f.bind(('::', 0)); addr=('::1', f.getsockname()[1]); g.sendto(b'', addr) g.sendto(b'b', addr) print(f.recvfrom(10, MSG_PEEK)); print(f.recvfrom(10, MSG_PEEK)); Where the expected output should be the empty string twice. Instead, make sk_peek_offset return negative values, and pass those values to __skb_try_recv_datagram/__skb_try_recv_from_queue. If the passed offset to __skb_try_recv_from_queue is negative, the checked skb is never skipped. __skb_try_recv_from_queue will then ensure the offset is reset back to 0 if a peek is requested without an offset, unless no packets are found. Also simplify the if condition in __skb_try_recv_from_queue. If _off is greater then 0, and off is greater then or equal to skb->len, then (_off || skb->len) must always be true assuming skb->len >= 0 is always true. Also remove a redundant check around a call to sk_peek_offset in af_unix.c, as it double checked if MSG_PEEK was set in the flags. V2: - Moved the negative fixup into __skb_try_recv_from_queue, and remove now redundant checks - Fix peeking in udp{,v6}_recvmsg to report the right value when the offset is 0 V3: - Marked new branch in __skb_try_recv_from_queue as unlikely. Signed-off-by: NMatthew Dawson <matthew@mjdsystems.ca> Acked-by: NWillem de Bruijn <willemb@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Jiri Pirko 提交于
The dereference before check is wrong and leads to an oops when p_filter_chain is NULL. The check needs to be done on the pointer to prevent NULL dereference. Fixes: f93e1cdc ("net/sched: fix filter flushing") Signed-off-by: NJiri Pirko <jiri@mellanox.com> Acked-by: NCong Wang <xiyou.wangcong@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 17 8月, 2017 4 次提交
-
-
由 Eric Dumazet 提交于
While working on yet another syzkaller report, I found that our IP_MAX_MTU enforcements were not properly done. gcc seems to reload dev->mtu for min(dev->mtu, IP_MAX_MTU), and final result can be bigger than IP_MAX_MTU :/ This is a problem because device mtu can be changed on other cpus or threads. While this patch does not fix the issue I am working on, it is probably worth addressing it. Signed-off-by: NEric Dumazet <edumazet@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Eric Dumazet 提交于
syszkaller team reported another problem in DCCP [1] Problem here is that the structure holding RTO timer (ccid2_hc_tx_rto_expire() handler) is freed too soon. We can not use del_timer_sync() to cancel the timer since this timer wants to grab socket lock (that would risk a dead lock) Solution is to defer the freeing of memory when all references to the socket were released. Socket timers do own a reference, so this should fix the issue. [1] ================================================================== BUG: KASAN: use-after-free in ccid2_hc_tx_rto_expire+0x51c/0x5c0 net/dccp/ccids/ccid2.c:144 Read of size 4 at addr ffff8801d2660540 by task kworker/u4:7/3365 CPU: 1 PID: 3365 Comm: kworker/u4:7 Not tainted 4.13.0-rc4+ #3 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Workqueue: events_unbound call_usermodehelper_exec_work Call Trace: <IRQ> __dump_stack lib/dump_stack.c:16 [inline] dump_stack+0x194/0x257 lib/dump_stack.c:52 print_address_description+0x73/0x250 mm/kasan/report.c:252 kasan_report_error mm/kasan/report.c:351 [inline] kasan_report+0x24e/0x340 mm/kasan/report.c:409 __asan_report_load4_noabort+0x14/0x20 mm/kasan/report.c:429 ccid2_hc_tx_rto_expire+0x51c/0x5c0 net/dccp/ccids/ccid2.c:144 call_timer_fn+0x233/0x830 kernel/time/timer.c:1268 expire_timers kernel/time/timer.c:1307 [inline] __run_timers+0x7fd/0xb90 kernel/time/timer.c:1601 run_timer_softirq+0x21/0x80 kernel/time/timer.c:1614 __do_softirq+0x2f5/0xba3 kernel/softirq.c:284 invoke_softirq kernel/softirq.c:364 [inline] irq_exit+0x1cc/0x200 kernel/softirq.c:405 exiting_irq arch/x86/include/asm/apic.h:638 [inline] smp_apic_timer_interrupt+0x76/0xa0 arch/x86/kernel/apic/apic.c:1044 apic_timer_interrupt+0x93/0xa0 arch/x86/entry/entry_64.S:702 RIP: 0010:arch_local_irq_enable arch/x86/include/asm/paravirt.h:824 [inline] RIP: 0010:__raw_write_unlock_irq include/linux/rwlock_api_smp.h:267 [inline] RIP: 0010:_raw_write_unlock_irq+0x56/0x70 kernel/locking/spinlock.c:343 RSP: 0018:ffff8801cd50eaa8 EFLAGS: 00000286 ORIG_RAX: ffffffffffffff10 RAX: dffffc0000000000 RBX: ffffffff85a090c0 RCX: 0000000000000006 RDX: 1ffffffff0b595f3 RSI: 1ffff1003962f989 RDI: ffffffff85acaf98 RBP: ffff8801cd50eab0 R08: 0000000000000001 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000000 R12: ffff8801cc96ea60 R13: dffffc0000000000 R14: ffff8801cc96e4c0 R15: ffff8801cc96e4c0 </IRQ> release_task+0xe9e/0x1a40 kernel/exit.c:220 wait_task_zombie kernel/exit.c:1162 [inline] wait_consider_task+0x29b8/0x33c0 kernel/exit.c:1389 do_wait_thread kernel/exit.c:1452 [inline] do_wait+0x441/0xa90 kernel/exit.c:1523 kernel_wait4+0x1f5/0x370 kernel/exit.c:1665 SYSC_wait4+0x134/0x140 kernel/exit.c:1677 SyS_wait4+0x2c/0x40 kernel/exit.c:1673 call_usermodehelper_exec_sync kernel/kmod.c:286 [inline] call_usermodehelper_exec_work+0x1a0/0x2c0 kernel/kmod.c:323 process_one_work+0xbf3/0x1bc0 kernel/workqueue.c:2097 worker_thread+0x223/0x1860 kernel/workqueue.c:2231 kthread+0x35e/0x430 kernel/kthread.c:231 ret_from_fork+0x2a/0x40 arch/x86/entry/entry_64.S:425 Allocated by task 21267: save_stack_trace+0x16/0x20 arch/x86/kernel/stacktrace.c:59 save_stack+0x43/0xd0 mm/kasan/kasan.c:447 set_track mm/kasan/kasan.c:459 [inline] kasan_kmalloc+0xad/0xe0 mm/kasan/kasan.c:551 kasan_slab_alloc+0x12/0x20 mm/kasan/kasan.c:489 kmem_cache_alloc+0x127/0x750 mm/slab.c:3561 ccid_new+0x20e/0x390 net/dccp/ccid.c:151 dccp_hdlr_ccid+0x27/0x140 net/dccp/feat.c:44 __dccp_feat_activate+0x142/0x2a0 net/dccp/feat.c:344 dccp_feat_activate_values+0x34e/0xa90 net/dccp/feat.c:1538 dccp_rcv_request_sent_state_process net/dccp/input.c:472 [inline] dccp_rcv_state_process+0xed1/0x1620 net/dccp/input.c:677 dccp_v4_do_rcv+0xeb/0x160 net/dccp/ipv4.c:679 sk_backlog_rcv include/net/sock.h:911 [inline] __release_sock+0x124/0x360 net/core/sock.c:2269 release_sock+0xa4/0x2a0 net/core/sock.c:2784 inet_wait_for_connect net/ipv4/af_inet.c:557 [inline] __inet_stream_connect+0x671/0xf00 net/ipv4/af_inet.c:643 inet_stream_connect+0x58/0xa0 net/ipv4/af_inet.c:682 SYSC_connect+0x204/0x470 net/socket.c:1642 SyS_connect+0x24/0x30 net/socket.c:1623 entry_SYSCALL_64_fastpath+0x1f/0xbe Freed by task 3049: save_stack_trace+0x16/0x20 arch/x86/kernel/stacktrace.c:59 save_stack+0x43/0xd0 mm/kasan/kasan.c:447 set_track mm/kasan/kasan.c:459 [inline] kasan_slab_free+0x71/0xc0 mm/kasan/kasan.c:524 __cache_free mm/slab.c:3503 [inline] kmem_cache_free+0x77/0x280 mm/slab.c:3763 ccid_hc_tx_delete+0xc5/0x100 net/dccp/ccid.c:190 dccp_destroy_sock+0x1d1/0x2b0 net/dccp/proto.c:225 inet_csk_destroy_sock+0x166/0x3f0 net/ipv4/inet_connection_sock.c:833 dccp_done+0xb7/0xd0 net/dccp/proto.c:145 dccp_time_wait+0x13d/0x300 net/dccp/minisocks.c:72 dccp_rcv_reset+0x1d1/0x5b0 net/dccp/input.c:160 dccp_rcv_state_process+0x8fc/0x1620 net/dccp/input.c:663 dccp_v4_do_rcv+0xeb/0x160 net/dccp/ipv4.c:679 sk_backlog_rcv include/net/sock.h:911 [inline] __sk_receive_skb+0x33e/0xc00 net/core/sock.c:521 dccp_v4_rcv+0xef1/0x1c00 net/dccp/ipv4.c:871 ip_local_deliver_finish+0x2e2/0xba0 net/ipv4/ip_input.c:216 NF_HOOK include/linux/netfilter.h:248 [inline] ip_local_deliver+0x1ce/0x6d0 net/ipv4/ip_input.c:257 dst_input include/net/dst.h:477 [inline] ip_rcv_finish+0x8db/0x19c0 net/ipv4/ip_input.c:397 NF_HOOK include/linux/netfilter.h:248 [inline] ip_rcv+0xc3f/0x17d0 net/ipv4/ip_input.c:488 __netif_receive_skb_core+0x19af/0x33d0 net/core/dev.c:4417 __netif_receive_skb+0x2c/0x1b0 net/core/dev.c:4455 process_backlog+0x203/0x740 net/core/dev.c:5130 napi_poll net/core/dev.c:5527 [inline] net_rx_action+0x792/0x1910 net/core/dev.c:5593 __do_softirq+0x2f5/0xba3 kernel/softirq.c:284 The buggy address belongs to the object at ffff8801d2660100 which belongs to the cache ccid2_hc_tx_sock of size 1240 The buggy address is located 1088 bytes inside of 1240-byte region [ffff8801d2660100, ffff8801d26605d8) The buggy address belongs to the page: page:ffffea0007499800 count:1 mapcount:0 mapping:ffff8801d2660100 index:0x0 compound_mapcount: 0 flags: 0x200000000008100(slab|head) raw: 0200000000008100 ffff8801d2660100 0000000000000000 0000000100000005 raw: ffffea00075271a0 ffffea0007538820 ffff8801d3aef9c0 0000000000000000 page dumped because: kasan: bad access detected Memory state around the buggy address: ffff8801d2660400: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ffff8801d2660480: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb >ffff8801d2660500: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ^ ffff8801d2660580: fb fb fb fb fb fb fb fb fb fb fb fc fc fc fc fc ffff8801d2660600: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc ================================================================== Signed-off-by: NEric Dumazet <edumazet@google.com> Reported-by: NDmitry Vyukov <dvyukov@google.com> Cc: Gerrit Renker <gerrit@erg.abdn.ac.uk> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Liping Zhang 提交于
For sw_flow_actions, the actions_len only represents the kernel part's size, and when we dump the actions to the userspace, we will do the convertions, so it's true size may become bigger than the actions_len. But unfortunately, for OVS_PACKET_ATTR_ACTIONS, we use the actions_len to alloc the skbuff, so the user_skb's size may become insufficient and oops will happen like this: skbuff: skb_over_panic: text:ffffffff8148fabf len:1749 put:157 head: ffff881300f39000 data:ffff881300f39000 tail:0x6d5 end:0x6c0 dev:<NULL> ------------[ cut here ]------------ kernel BUG at net/core/skbuff.c:129! [...] Call Trace: <IRQ> [<ffffffff8148be82>] skb_put+0x43/0x44 [<ffffffff8148fabf>] skb_zerocopy+0x6c/0x1f4 [<ffffffffa0290d36>] queue_userspace_packet+0x3a3/0x448 [openvswitch] [<ffffffffa0292023>] ovs_dp_upcall+0x30/0x5c [openvswitch] [<ffffffffa028d435>] output_userspace+0x132/0x158 [openvswitch] [<ffffffffa01e6890>] ? ip6_rcv_finish+0x74/0x77 [ipv6] [<ffffffffa028e277>] do_execute_actions+0xcc1/0xdc8 [openvswitch] [<ffffffffa028e3f2>] ovs_execute_actions+0x74/0x106 [openvswitch] [<ffffffffa0292130>] ovs_dp_process_packet+0xe1/0xfd [openvswitch] [<ffffffffa0292b77>] ? key_extract+0x63c/0x8d5 [openvswitch] [<ffffffffa029848b>] ovs_vport_receive+0xa1/0xc3 [openvswitch] [...] Also we can find that the actions_len is much little than the orig_len: crash> struct sw_flow_actions 0xffff8812f539d000 struct sw_flow_actions { rcu = { next = 0xffff8812f5398800, func = 0xffffe3b00035db32 }, orig_len = 1384, actions_len = 592, actions = 0xffff8812f539d01c } So as a quick fix, use the orig_len instead of the actions_len to alloc the user_skb. Last, this oops happened on our system running a relative old kernel, but the same risk still exists on the mainline, since we use the wrong actions_len from the beginning. Fixes: ccea7445 ("openvswitch: include datapath actions with sampled-packet upcall to userspace") Cc: Neil McKee <neil.mckee@inmon.com> Signed-off-by: NLiping Zhang <zlpnobody@gmail.com> Acked-by: NPravin B Shelar <pshelar@ovn.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David Ahern 提交于
Anuradha reported that statically added groups for interfaces enslaved to a VRF device were not persisting. The problem is that igmp queries and reports need to use the data in the in_dev for the real ingress device rather than the VRF device. Update igmp_rcv accordingly. Fixes: e58e4159 ("net: Enable support for VRF with ipv4 multicast") Reported-by: NAnuradha Karuppiah <anuradhak@cumulusnetworks.com> Signed-off-by: NDavid Ahern <dsahern@gmail.com> Reviewed-by: NNikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 16 8月, 2017 5 次提交
-
-
由 Konstantin Khlebnikov 提交于
It was added in commit e57a784d ("pkt_sched: set root qdisc before change() in attach_default_qdiscs()") to hide duplicates from "tc qdisc show" for incative deivices. After 59cc1f61 ("net: sched: convert qdisc linked list to hashtable") it triggered when classful qdisc is added to inactive device because default qdiscs are added before switching root qdisc. Anyway after commit ea327469 ("net: sched: avoid duplicates in qdisc dump") duplicates are filtered right in dumper. Signed-off-by: NKonstantin Khlebnikov <khlebnikov@yandex-team.ru> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Konstantin Khlebnikov 提交于
When sfq_enqueue() drops head packet or packet from another queue it have to update backlog at upper qdiscs too. Fixes: 2ccccf5f ("net_sched: update hierarchical backlog too") Signed-off-by: NKonstantin Khlebnikov <khlebnikov@yandex-team.ru> Acked-by: NEric Dumazet <edumazet@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Konstantin Khlebnikov 提交于
Traffic filters could keep direct pointers to classes in classful qdisc, thus qdisc destruction first removes all filters before freeing classes. Class destruction methods also tries to free attached filters but now this isn't safe because tcf_block_put() unlike to tcf_destroy_chain() cannot be called second time. This patch set class->block to NULL after first tcf_block_put() and turn second call into no-op. Fixes: 6529eaba ("net: sched: introduce tcf block infractructure") Signed-off-by: NKonstantin Khlebnikov <khlebnikov@yandex-team.ru> Acked-by: NJiri Pirko <jiri@mellanox.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Eric Dumazet 提交于
If fi->fib_metrics could not be allocated in fib_create_info() we attempt to dereference a NULL pointer in free_fib_info_rcu() : m = fi->fib_metrics; if (m != &dst_default_metrics && atomic_dec_and_test(&m->refcnt)) kfree(m); Before my recent patch, we used to call kfree(NULL) and nothing wrong happened. Instead of using RCU to defer freeing while we are under memory stress, it seems better to take immediate action. This was reported by syzkaller team. Fixes: 3fb07daf ("ipv4: add reference counting to metrics") Signed-off-by: NEric Dumazet <edumazet@google.com> Reported-by: NDmitry Vyukov <dvyukov@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Eric Dumazet 提交于
Based on a syzkaller report [1], I found that a per cpu allocation failure in snmp6_alloc_dev() would then lead to NULL dereference in ip6_route_dev_notify(). It seems this is a very old bug, thus no Fixes tag in this submission. Let's add in6_dev_put_clear() helper, as we will probably use it elsewhere (once available/present in net-next) [1] kasan: CONFIG_KASAN_INLINE enabled kasan: GPF could be caused by NULL-ptr deref or user memory access general protection fault: 0000 [#1] SMP KASAN Dumping ftrace buffer: (ftrace buffer empty) Modules linked in: CPU: 1 PID: 17294 Comm: syz-executor6 Not tainted 4.13.0-rc2+ #10 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 task: ffff88019f456680 task.stack: ffff8801c6e58000 RIP: 0010:__read_once_size include/linux/compiler.h:250 [inline] RIP: 0010:atomic_read arch/x86/include/asm/atomic.h:26 [inline] RIP: 0010:refcount_sub_and_test+0x7d/0x1b0 lib/refcount.c:178 RSP: 0018:ffff8801c6e5f1b0 EFLAGS: 00010202 RAX: 0000000000000037 RBX: dffffc0000000000 RCX: ffffc90005d25000 RDX: ffff8801c6e5f218 RSI: ffffffff82342bbf RDI: 0000000000000001 RBP: ffff8801c6e5f240 R08: 0000000000000001 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000000 R12: 1ffff10038dcbe37 R13: 0000000000000006 R14: 0000000000000001 R15: 00000000000001b8 FS: 00007f21e0429700(0000) GS:ffff8801dc100000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000001ddbc22000 CR3: 00000001d632b000 CR4: 00000000001426e0 DR0: 0000000020000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000600 Call Trace: refcount_dec_and_test+0x1a/0x20 lib/refcount.c:211 in6_dev_put include/net/addrconf.h:335 [inline] ip6_route_dev_notify+0x1c9/0x4a0 net/ipv6/route.c:3732 notifier_call_chain+0x136/0x2c0 kernel/notifier.c:93 __raw_notifier_call_chain kernel/notifier.c:394 [inline] raw_notifier_call_chain+0x2d/0x40 kernel/notifier.c:401 call_netdevice_notifiers_info+0x51/0x90 net/core/dev.c:1678 call_netdevice_notifiers net/core/dev.c:1694 [inline] rollback_registered_many+0x91c/0xe80 net/core/dev.c:7107 rollback_registered+0x1be/0x3c0 net/core/dev.c:7149 register_netdevice+0xbcd/0xee0 net/core/dev.c:7587 register_netdev+0x1a/0x30 net/core/dev.c:7669 loopback_net_init+0x76/0x160 drivers/net/loopback.c:214 ops_init+0x10a/0x570 net/core/net_namespace.c:118 setup_net+0x313/0x710 net/core/net_namespace.c:294 copy_net_ns+0x27c/0x580 net/core/net_namespace.c:418 create_new_namespaces+0x425/0x880 kernel/nsproxy.c:107 unshare_nsproxy_namespaces+0xae/0x1e0 kernel/nsproxy.c:206 SYSC_unshare kernel/fork.c:2347 [inline] SyS_unshare+0x653/0xfa0 kernel/fork.c:2297 entry_SYSCALL_64_fastpath+0x1f/0xbe RIP: 0033:0x4512c9 RSP: 002b:00007f21e0428c08 EFLAGS: 00000216 ORIG_RAX: 0000000000000110 RAX: ffffffffffffffda RBX: 0000000000718150 RCX: 00000000004512c9 RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000062020200 RBP: 0000000000000086 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000216 R12: 00000000004b973d R13: 00000000ffffffff R14: 000000002001d000 R15: 00000000000002dd Code: 50 2b 34 82 c7 00 f1 f1 f1 f1 c7 40 04 04 f2 f2 f2 c7 40 08 f3 f3 f3 f3 e8 a1 43 39 ff 4c 89 f8 48 8b 95 70 ff ff ff 48 c1 e8 03 <0f> b6 0c 18 4c 89 f8 83 e0 07 83 c0 03 38 c8 7c 08 84 c9 0f 85 RIP: __read_once_size include/linux/compiler.h:250 [inline] RSP: ffff8801c6e5f1b0 RIP: atomic_read arch/x86/include/asm/atomic.h:26 [inline] RSP: ffff8801c6e5f1b0 RIP: refcount_sub_and_test+0x7d/0x1b0 lib/refcount.c:178 RSP: ffff8801c6e5f1b0 ---[ end trace e441d046c6410d31 ]--- Signed-off-by: NEric Dumazet <edumazet@google.com> Reported-by: NDmitry Vyukov <dvyukov@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 15 8月, 2017 5 次提交
-
-
由 Eric Dumazet 提交于
Filtering the ACK packet was not put at the right place. At this place, we already allocated a child and put it into accept queue. We absolutely need to call tcp_child_process() to release its spinlock, or we will deadlock at accept() or close() time. Found by syzkaller team (Thanks a lot !) Fixes: 8fac365f ("tcp: Add a tcp_filter hook before handle ack packet") Signed-off-by: NEric Dumazet <edumazet@google.com> Reported-by: NDmitry Vyukov <dvyukov@google.com> Cc: Chenbo Feng <fengc@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Eric Dumazet 提交于
syzkaller reported that DCCP could have a non empty write queue at dismantle time. WARNING: CPU: 1 PID: 2953 at net/core/stream.c:199 sk_stream_kill_queues+0x3ce/0x520 net/core/stream.c:199 Kernel panic - not syncing: panic_on_warn set ... CPU: 1 PID: 2953 Comm: syz-executor0 Not tainted 4.13.0-rc4+ #2 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: __dump_stack lib/dump_stack.c:16 [inline] dump_stack+0x194/0x257 lib/dump_stack.c:52 panic+0x1e4/0x417 kernel/panic.c:180 __warn+0x1c4/0x1d9 kernel/panic.c:541 report_bug+0x211/0x2d0 lib/bug.c:183 fixup_bug+0x40/0x90 arch/x86/kernel/traps.c:190 do_trap_no_signal arch/x86/kernel/traps.c:224 [inline] do_trap+0x260/0x390 arch/x86/kernel/traps.c:273 do_error_trap+0x120/0x390 arch/x86/kernel/traps.c:310 do_invalid_op+0x1b/0x20 arch/x86/kernel/traps.c:323 invalid_op+0x1e/0x30 arch/x86/entry/entry_64.S:846 RIP: 0010:sk_stream_kill_queues+0x3ce/0x520 net/core/stream.c:199 RSP: 0018:ffff8801d182f108 EFLAGS: 00010297 RAX: ffff8801d1144140 RBX: ffff8801d13cb280 RCX: 0000000000000000 RDX: 0000000000000000 RSI: ffffffff85137b00 RDI: ffff8801d13cb280 RBP: ffff8801d182f148 R08: 0000000000000001 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000000 R12: ffff8801d13cb4d0 R13: ffff8801d13cb3b8 R14: ffff8801d13cb300 R15: ffff8801d13cb3b8 inet_csk_destroy_sock+0x175/0x3f0 net/ipv4/inet_connection_sock.c:835 dccp_close+0x84d/0xc10 net/dccp/proto.c:1067 inet_release+0xed/0x1c0 net/ipv4/af_inet.c:425 sock_release+0x8d/0x1e0 net/socket.c:597 sock_close+0x16/0x20 net/socket.c:1126 __fput+0x327/0x7e0 fs/file_table.c:210 ____fput+0x15/0x20 fs/file_table.c:246 task_work_run+0x18a/0x260 kernel/task_work.c:116 exit_task_work include/linux/task_work.h:21 [inline] do_exit+0xa32/0x1b10 kernel/exit.c:865 do_group_exit+0x149/0x400 kernel/exit.c:969 get_signal+0x7e8/0x17e0 kernel/signal.c:2330 do_signal+0x94/0x1ee0 arch/x86/kernel/signal.c:808 exit_to_usermode_loop+0x21c/0x2d0 arch/x86/entry/common.c:157 prepare_exit_to_usermode arch/x86/entry/common.c:194 [inline] syscall_return_slowpath+0x3a7/0x450 arch/x86/entry/common.c:263 Signed-off-by: NEric Dumazet <edumazet@google.com> Reported-by: NDmitry Vyukov <dvyukov@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Wei Wang 提交于
When a dst is created by addrconf_dst_alloc() for a host route or an anycast route, dst->dev points to loopback dev while rt6->rt6i_idev points to a real device. When the real device goes down, the current cleanup code only checks for dst->dev and assumes rt6->rt6i_idev->dev is the same. This causes the refcount leak on the real device in the above situation. This patch makes sure to always release the refcount taken on rt6->rt6i_idev during dst_dev_put(). Fixes: 587fea74 ("ipv6: mark DST_NOGC and remove the operation of dst_free()") Reported-by: NJohn Stultz <john.stultz@linaro.org> Tested-by: NJohn Stultz <john.stultz@linaro.org> Tested-by: NMartin KaFai Lau <kafai@fb.com> Signed-off-by: NWei Wang <weiwan@google.com> Signed-off-by: NMartin KaFai Lau <kafai@fb.com> Acked-by: NDavid Ahern <dsahern@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Eric Dumazet 提交于
pfkey_broadcast() might be called from non process contexts, we can not use GFP_KERNEL in these cases [1]. This patch partially reverts commit ba51b6be ("net: Fix RCU splat in af_key"), only keeping the GFP_ATOMIC forcing under rcu_read_lock() section. [1] : syzkaller reported : in_atomic(): 1, irqs_disabled(): 0, pid: 2932, name: syzkaller183439 3 locks held by syzkaller183439/2932: #0: (&net->xfrm.xfrm_cfg_mutex){+.+.+.}, at: [<ffffffff83b43888>] pfkey_sendmsg+0x4c8/0x9f0 net/key/af_key.c:3649 #1: (&pfk->dump_lock){+.+.+.}, at: [<ffffffff83b467f6>] pfkey_do_dump+0x76/0x3f0 net/key/af_key.c:293 #2: (&(&net->xfrm.xfrm_policy_lock)->rlock){+...+.}, at: [<ffffffff83957632>] spin_lock_bh include/linux/spinlock.h:304 [inline] #2: (&(&net->xfrm.xfrm_policy_lock)->rlock){+...+.}, at: [<ffffffff83957632>] xfrm_policy_walk+0x192/0xa30 net/xfrm/xfrm_policy.c:1028 CPU: 0 PID: 2932 Comm: syzkaller183439 Not tainted 4.13.0-rc4+ #24 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: __dump_stack lib/dump_stack.c:16 [inline] dump_stack+0x194/0x257 lib/dump_stack.c:52 ___might_sleep+0x2b2/0x470 kernel/sched/core.c:5994 __might_sleep+0x95/0x190 kernel/sched/core.c:5947 slab_pre_alloc_hook mm/slab.h:416 [inline] slab_alloc mm/slab.c:3383 [inline] kmem_cache_alloc+0x24b/0x6e0 mm/slab.c:3559 skb_clone+0x1a0/0x400 net/core/skbuff.c:1037 pfkey_broadcast_one+0x4b2/0x6f0 net/key/af_key.c:207 pfkey_broadcast+0x4ba/0x770 net/key/af_key.c:281 dump_sp+0x3d6/0x500 net/key/af_key.c:2685 xfrm_policy_walk+0x2f1/0xa30 net/xfrm/xfrm_policy.c:1042 pfkey_dump_sp+0x42/0x50 net/key/af_key.c:2695 pfkey_do_dump+0xaa/0x3f0 net/key/af_key.c:299 pfkey_spddump+0x1a0/0x210 net/key/af_key.c:2722 pfkey_process+0x606/0x710 net/key/af_key.c:2814 pfkey_sendmsg+0x4d6/0x9f0 net/key/af_key.c:3650 sock_sendmsg_nosec net/socket.c:633 [inline] sock_sendmsg+0xca/0x110 net/socket.c:643 ___sys_sendmsg+0x755/0x890 net/socket.c:2035 __sys_sendmsg+0xe5/0x210 net/socket.c:2069 SYSC_sendmsg net/socket.c:2080 [inline] SyS_sendmsg+0x2d/0x50 net/socket.c:2076 entry_SYSCALL_64_fastpath+0x1f/0xbe RIP: 0033:0x445d79 RSP: 002b:00007f32447c1dc8 EFLAGS: 00000202 ORIG_RAX: 000000000000002e RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 0000000000445d79 RDX: 0000000000000000 RSI: 000000002023dfc8 RDI: 0000000000000008 RBP: 0000000000000086 R08: 00007f32447c2700 R09: 00007f32447c2700 R10: 00007f32447c2700 R11: 0000000000000202 R12: 0000000000000000 R13: 00007ffe33edec4f R14: 00007f32447c29c0 R15: 0000000000000000 Fixes: ba51b6be ("net: Fix RCU splat in af_key") Signed-off-by: NEric Dumazet <edumazet@google.com> Reported-by: NDmitry Vyukov <dvyukov@google.com> Cc: David Ahern <dsa@cumulusnetworks.com> Acked-by: NDavid Ahern <dsahern@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Sabrina Dubroca 提交于
__tcp_ulp_find_autoload returns tcp_ulp_ops after taking a reference on the module. Then, if ->init fails, tcp_set_ulp propagates the error but nothing releases that reference. Fixes: 734942cc ("tcp: ULP infrastructure") Signed-off-by: NSabrina Dubroca <sd@queasysnail.net> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-