In commit 4a3d6c6a ("libbpf: Reduce log level for custom section
names"), log level for messages for libbpf_attach_type_by_name() and
libbpf_prog_type_by_name() was downgraded from "info" to "debug". The
latter function, in particular, is used by bpftool when attempting to
load programs, and this change caused bpftool to exit with no hint or
error message when it fails to detect the type of the program to load
(unless "-d" option was provided).

To help users understand why bpftool fails to load the program, let's do
a second run of the function with log level in "debug" mode in case of
failure.

Before:

    # bpftool prog load sample_ret0.o /sys/fs/bpf/sample_ret0
    # echo $?
    255

Or really verbose with -d flag:

    # bpftool -d prog load sample_ret0.o /sys/fs/bpf/sample_ret0
    libbpf: loading sample_ret0.o
    libbpf: section(1) .strtab, size 134, link 0, flags 0, type=3
    libbpf: skip section(1) .strtab
    libbpf: section(2) .text, size 16, link 0, flags 6, type=1
    libbpf: found program .text
    libbpf: section(3) .debug_abbrev, size 55, link 0, flags 0, type=1
    libbpf: skip section(3) .debug_abbrev
    libbpf: section(4) .debug_info, size 75, link 0, flags 0, type=1
    libbpf: skip section(4) .debug_info
    libbpf: section(5) .rel.debug_info, size 32, link 14, flags 0, type=9
    libbpf: skip relo .rel.debug_info(5) for section(4)
    libbpf: section(6) .debug_str, size 150, link 0, flags 30, type=1
    libbpf: skip section(6) .debug_str
    libbpf: section(7) .BTF, size 155, link 0, flags 0, type=1
    libbpf: section(8) .BTF.ext, size 80, link 0, flags 0, type=1
    libbpf: section(9) .rel.BTF.ext, size 32, link 14, flags 0, type=9
    libbpf: skip relo .rel.BTF.ext(9) for section(8)
    libbpf: section(10) .debug_frame, size 40, link 0, flags 0, type=1
    libbpf: skip section(10) .debug_frame
    libbpf: section(11) .rel.debug_frame, size 16, link 14, flags 0, type=9
    libbpf: skip relo .rel.debug_frame(11) for section(10)
    libbpf: section(12) .debug_line, size 74, link 0, flags 0, type=1
    libbpf: skip section(12) .debug_line
    libbpf: section(13) .rel.debug_line, size 16, link 14, flags 0, type=9
    libbpf: skip relo .rel.debug_line(13) for section(12)
    libbpf: section(14) .symtab, size 96, link 1, flags 0, type=2
    libbpf: looking for externs among 4 symbols...
    libbpf: collected 0 externs total
    libbpf: failed to guess program type from ELF section '.text'
    libbpf: supported section(type) names are: socket sk_reuseport kprobe/ [...]

After:

    # bpftool prog load sample_ret0.o /sys/fs/bpf/sample_ret0
    libbpf: failed to guess program type from ELF section '.text'
    libbpf: supported section(type) names are: socket sk_reuseport kprobe/ [...]
Signed-off-by: NQuentin Monnet <quentin@isovalent.com>
Signed-off-by: NAlexei Starovoitov <ast@kernel.org>
Acked-by: NJohn Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/bpf/20200311021205.9755-1-quentin@isovalent.comSigned-off-by: NAlexei Starovoitov <ast@kernel.org>

Introduce new helper that reuses existing xdp perf_event output
implementation, but can be called from raw_tracepoint programs
that receive 'struct xdp_buff *' as a tracepoint argument.
Signed-off-by: NEelco Chaudron <echaudro@redhat.com>
Signed-off-by: NAlexei Starovoitov <ast@kernel.org>
Acked-by: NJohn Fastabend <john.fastabend@gmail.com>
Acked-by: NToke Høiland-Jørgensen <toke@redhat.com>
Link: https://lore.kernel.org/bpf/158348514556.2239.11050972434793741444.stgit@xdp-tutorial

Carlos Neira says:

====================
Currently bpf_get_current_pid_tgid(), is used to do pid filtering in bcc's
scripts but this helper returns the pid as seen by the root namespace which is
fine when a bcc script is not executed inside a container.
When the process of interest is inside a container, pid filtering will not work
if bpf_get_current_pid_tgid() is used.
This helper addresses this limitation returning the pid as it's seen by the current
namespace where the script is executing.

In the future different pid_ns files may belong to different devices, according to the
discussion between Eric Biederman and Yonghong in 2017 Linux plumbers conference.
To address that situation the helper requires inum and dev_t from /proc/self/ns/pid.
This helper has the same use cases as bpf_get_current_pid_tgid() as it can be
used to do pid filtering even inside a container.
====================
Signed-off-by: NAlexei Starovoitov <ast@kernel.org>

Self tests added for new helper bpf_get_ns_current_pid_tgid
Signed-off-by: NCarlos Neira <cneirabustos@gmail.com>
Signed-off-by: NAlexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20200304204157.58695-4-cneirabustos@gmail.com

New bpf helper bpf_get_ns_current_pid_tgid,
This helper will return pid and tgid from current task
which namespace matches dev_t and inode number provided,
this will allows us to instrument a process inside a container.
Signed-off-by: NCarlos Neira <cneirabustos@gmail.com>
Signed-off-by: NAlexei Starovoitov <ast@kernel.org>
Acked-by: NYonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/20200304204157.58695-3-cneirabustos@gmail.com

ns_match returns true if the namespace inode and dev_t matches the ones
provided by the caller.
Signed-off-by: NCarlos Neira <cneirabustos@gmail.com>
Signed-off-by: NAlexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20200304204157.58695-2-cneirabustos@gmail.com

Minor fixes for bash completion: addition of program name completion for
two subcommands, and correction for program test-runs and map pinning.

The completion for the following commands is fixed or improved:

    # bpftool prog run [TAB]
    # bpftool prog pin [TAB]
    # bpftool map pin [TAB]
    # bpftool net attach xdp name [TAB]
Signed-off-by: NQuentin Monnet <quentin@isovalent.com>
Signed-off-by: NDaniel Borkmann <daniel@iogearbox.net>
Acked-by: NMartin KaFai Lau <kafai@fb.com>
Link: https://lore.kernel.org/bpf/20200312184608.12050-3-quentin@isovalent.com

Documentation and interactive help for bpftool have always explained
that the regular handles for programs (id|name|tag|pinned) and maps
(id|name|pinned) can be passed to the utility when attempting to pin
objects (bpftool prog pin PROG / bpftool map pin MAP).

THIS IS A LIE!! The tool actually accepts only ids, as the parsing is
done in do_pin_any() in common.c instead of reusing the parsing
functions that have long been generic for program and map handles.

Instead of fixing the doc, fix the code. It is trivial to reuse the
generic parsing, and to simplify do_pin_any() in the process.

Do not accept to pin multiple objects at the same time with
prog_parse_fds() or map_parse_fds() (this would require a more complex
syntax for passing multiple sysfs paths and validating that they
correspond to the number of e.g. programs we find for a given name or
tag).
Signed-off-by: NQuentin Monnet <quentin@isovalent.com>
Signed-off-by: NDaniel Borkmann <daniel@iogearbox.net>
Acked-by: NMartin KaFai Lau <kafai@fb.com>
Link: https://lore.kernel.org/bpf/20200312184608.12050-2-quentin@isovalent.com

Needs for application BTF being present differs between user-space libbpf needs and kernel
needs. Currently, BTF is mandatory only in kernel only when BPF application is
using STRUCT_OPS. While libbpf itself relies more heavily on presense of BTF:
  - for BTF-defined maps;
  - for Kconfig externs;
  - for STRUCT_OPS as well.

Thus, checks for presence and validness of bpf_object's BPF needs to be
performed separately, which is patch does.

Fixes: 53276446 ("libbpf: Relax check whether BTF is mandatory")
Reported-by: NMichal Rostecki <mrostecki@opensuse.org>
Signed-off-by: NAndrii Nakryiko <andriin@fb.com>
Signed-off-by: NDaniel Borkmann <daniel@iogearbox.net>
Acked-by: NMartin KaFai Lau <kafai@fb.com>
Cc: Quentin Monnet <quentin@isovalent.com>
Link: https://lore.kernel.org/bpf/20200312185033.736911-1-andriin@fb.com

These files are generated, so ignore them.
Signed-off-by: NSong Liu <songliubraving@fb.com>
Signed-off-by: NDaniel Borkmann <daniel@iogearbox.net>
Reviewed-by: NQuentin Monnet <quentin@isovalent.com>
Link: https://lore.kernel.org/bpf/20200312182332.3953408-4-songliubraving@fb.com

Add the dependency to libbpf, to fix build errors like:

  In file included from skeleton/profiler.bpf.c:5:
  .../bpf_helpers.h:5:10: fatal error: 'bpf_helper_defs.h' file not found
  #include "bpf_helper_defs.h"
           ^~~~~~~~~~~~~~~~~~~
  1 error generated.
  make: *** [skeleton/profiler.bpf.o] Error 1
  make: *** Waiting for unfinished jobs....

Fixes: 47c09d6a ("bpftool: Introduce "prog profile" command")
Suggested-by: NQuentin Monnet <quentin@isovalent.com>
Signed-off-by: NSong Liu <songliubraving@fb.com>
Signed-off-by: NDaniel Borkmann <daniel@iogearbox.net>
Reviewed-by: NQuentin Monnet <quentin@isovalent.com>
Acked-by: NJohn Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/bpf/20200312182332.3953408-3-songliubraving@fb.com

bpftool-prog-profile requires clang to generate BTF for global variables.
When compared with older clang, skip this command. This is achieved by
adding a new feature, clang-bpf-global-var, to tools/build/feature.
Signed-off-by: NSong Liu <songliubraving@fb.com>
Signed-off-by: NDaniel Borkmann <daniel@iogearbox.net>
Reviewed-by: NQuentin Monnet <quentin@isovalent.com>
Link: https://lore.kernel.org/bpf/20200312182332.3953408-2-songliubraving@fb.com

When compiling bpftool on a system where the /usr/include/asm symlink
doesn't exist (e.g. on an Ubuntu system without gcc-multilib installed),
the build fails with:

    CLANG    skeleton/profiler.bpf.o
  In file included from skeleton/profiler.bpf.c:4:
  In file included from /usr/include/linux/bpf.h:11:
  /usr/include/linux/types.h:5:10: fatal error: 'asm/types.h' file not found
  #include <asm/types.h>
           ^~~~~~~~~~~~~
  1 error generated.
  make: *** [Makefile:123: skeleton/profiler.bpf.o] Error 1

This indicates that the build is using linux/types.h from system headers
instead of source tree headers.

To fix this, adjust the clang search path to include the necessary
headers from tools/testing/selftests/bpf/include/uapi and
tools/include/uapi. Also use __bitwise__ instead of __bitwise in
skeleton/profiler.h to avoid clashing with the definition in
tools/testing/selftests/bpf/include/uapi/linux/types.h.
Signed-off-by: NTobias Klauser <tklauser@distanz.ch>
Signed-off-by: NDaniel Borkmann <daniel@iogearbox.net>
Reviewed-by: NQuentin Monnet <quentin@isovalent.com>
Link: https://lore.kernel.org/bpf/20200312130330.32239-1-tklauser@distanz.ch

Libbpf compiles and runs subset of selftests on each PR in its Github mirror
repository. To allow still building up-to-date selftests against outdated
kernel images, add back BPF_F_CURRENT_CPU definitions back.

N.B. BCC's runqslower version ([0]) doesn't need BPF_F_CURRENT_CPU due to use of
locally checked in vmlinux.h, generated against kernel with 1aae4bdd ("bpf:
Switch BPF UAPI #define constants used from BPF program side to enums")
applied.

  [0] https://github.com/iovisor/bcc/pull/2809

Fixes: 367d82f1 (" tools/runqslower: Drop copy/pasted BPF_F_CURRENT_CPU definiton")
Signed-off-by: NAndrii Nakryiko <andriin@fb.com>
Signed-off-by: NDaniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20200311043010.530620-1-andriin@fb.com

fmod_ret progs are emitted as:

start = __bpf_prog_enter();
call fmod_ret
*(u64 *)(rbp - 8) = rax
__bpf_prog_exit(, start);
test eax, eax
jne do_fexit

That 'test eax, eax' is working by accident. The compiler is free to use rax
inside __bpf_prog_exit() or inside functions that __bpf_prog_exit() is calling.
Which caused "test_progs -t modify_return" to sporadically fail depending on
compiler version and kconfig. Fix it by using 'cmp [rbp - 8], 0' instead of
'test eax, eax'.

Fixes: ae240823 ("bpf: Introduce BPF_MODIFY_RETURN")
Reported-by: NAndrii Nakryiko <andriin@fb.com>
Signed-off-by: NAlexei Starovoitov <ast@kernel.org>
Signed-off-by: NDaniel Borkmann <daniel@iogearbox.net>
Acked-by: NAndrii Nakryiko <andriin@fb.com>
Acked-by: NKP Singh <kpsingh@google.com>
Link: https://lore.kernel.org/bpf/20200311003906.3643037-1-ast@kernel.org

Add bpf_link_new_file() API for cases when we need to ensure anon_inode is
successfully created before we proceed with expensive BPF program attachment
procedure, which will require equally (if not more so) expensive and
potentially failing compensation detachment procedure just because anon_inode
creation failed. This API allows to simplify code by ensuring first that
anon_inode is created and after BPF program is attached proceed with
fd_install() that can't fail.

After anon_inode file is created, link can't be just kfree()'d anymore,
because its destruction will be performed by deferred file_operations->release
call. For this, bpf_link API required specifying two separate operations:
release() and dealloc(), former performing detachment only, while the latter
frees memory used by bpf_link itself. dealloc() needs to be specified, because
struct bpf_link is frequently embedded into link type-specific container
struct (e.g., struct bpf_raw_tp_link), so bpf_link itself doesn't know how to
properly free the memory. In case when anon_inode file was successfully
created, but subsequent BPF attachment failed, bpf_link needs to be marked as
"defunct", so that file's release() callback will perform only memory
deallocation, but no detachment.

Convert raw tracepoint and tracing attachment to new API and eliminate
detachment from error handling path.
Signed-off-by: NAndrii Nakryiko <andriin@fb.com>
Signed-off-by: NDaniel Borkmann <daniel@iogearbox.net>
Acked-by: NJohn Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/bpf/20200309231051.1270337-1-andriin@fb.com

_bpftool_get_map_names => _bpftool_get_prog_names for prog-attach|detach.

Fixes: 99f9863a ("bpftool: Match maps by name")
Signed-off-by: NSong Liu <songliubraving@fb.com>
Signed-off-by: NDaniel Borkmann <daniel@iogearbox.net>
Reviewed-by: NQuentin Monnet <quentin@isovalent.com>
Link: https://lore.kernel.org/bpf/20200309173218.2739965-5-songliubraving@fb.com

Add bash completion for "bpftool prog profile" command.
Signed-off-by: NSong Liu <songliubraving@fb.com>
Signed-off-by: NDaniel Borkmann <daniel@iogearbox.net>
Reviewed-by: NQuentin Monnet <quentin@isovalent.com>
Link: https://lore.kernel.org/bpf/20200309173218.2739965-4-songliubraving@fb.com

Add documentation for the new bpftool prog profile command.
Signed-off-by: NSong Liu <songliubraving@fb.com>
Signed-off-by: NDaniel Borkmann <daniel@iogearbox.net>
Reviewed-by: NQuentin Monnet <quentin@isovalent.com>
Link: https://lore.kernel.org/bpf/20200309173218.2739965-3-songliubraving@fb.com

With fentry/fexit programs, it is possible to profile BPF program with
hardware counters. Introduce bpftool "prog profile", which measures key
metrics of a BPF program.

bpftool prog profile command creates per-cpu perf events. Then it attaches
fentry/fexit programs to the target BPF program. The fentry program saves
perf event value to a map. The fexit program reads the perf event again,
and calculates the difference, which is the instructions/cycles used by
the target program.

Example input and output:

  ./bpftool prog profile id 337 duration 3 cycles instructions llc_misses

        4228 run_cnt
     3403698 cycles                                              (84.08%)
     3525294 instructions   #  1.04 insn per cycle               (84.05%)
          13 llc_misses     #  3.69 LLC misses per million isns  (83.50%)

This command measures cycles and instructions for BPF program with id
337 for 3 seconds. The program has triggered 4228 times. The rest of the
output is similar to perf-stat. In this example, the counters were only
counting ~84% of the time because of time multiplexing of perf counters.

Note that, this approach measures cycles and instructions in very small
increments. So the fentry/fexit programs introduce noticeable errors to
the measurement results.

The fentry/fexit programs are generated with BPF skeletons. Therefore, we
build bpftool twice. The first time _bpftool is built without skeletons.
Then, _bpftool is used to generate the skeletons. The second time, bpftool
is built with skeletons.
Signed-off-by: NSong Liu <songliubraving@fb.com>
Signed-off-by: NDaniel Borkmann <daniel@iogearbox.net>
Reviewed-by: NQuentin Monnet <quentin@isovalent.com>
Acked-by: NYonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/20200309173218.2739965-2-songliubraving@fb.com

Add Jakub and myself as maintainers for sockmap related code.
Signed-off-by: NLorenz Bauer <lmb@cloudflare.com>
Signed-off-by: NDaniel Borkmann <daniel@iogearbox.net>
Reviewed-by: NJakub Sitnicki <jakub@cloudflare.com>
Acked-by: NJohn Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/bpf/20200309111243.6982-13-lmb@cloudflare.com

Remove the guard that disables UDP tests now that sockmap
has support for them.
Signed-off-by: NLorenz Bauer <lmb@cloudflare.com>
Signed-off-by: NDaniel Borkmann <daniel@iogearbox.net>
Reviewed-by: NJakub Sitnicki <jakub@cloudflare.com>
Acked-by: NJohn Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/bpf/20200309111243.6982-12-lmb@cloudflare.com

Expand the TCP sockmap test suite to also check UDP sockets.
Signed-off-by: NJakub Sitnicki <jakub@cloudflare.com>
Signed-off-by: NLorenz Bauer <lmb@cloudflare.com>
Signed-off-by: NDaniel Borkmann <daniel@iogearbox.net>
Acked-by: NJohn Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/bpf/20200309111243.6982-11-lmb@cloudflare.com

Most tests for TCP sockmap can be adapted to UDP sockmap if the
listen call is skipped. Rename listen_loopback, etc. to socket_loopback
and skip listen() for SOCK_DGRAM.
Signed-off-by: NLorenz Bauer <lmb@cloudflare.com>
Signed-off-by: NDaniel Borkmann <daniel@iogearbox.net>
Reviewed-by: NJakub Sitnicki <jakub@cloudflare.com>
Acked-by: NJohn Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/bpf/20200309111243.6982-10-lmb@cloudflare.com

Allow adding hashed UDP sockets to sockmaps.
Signed-off-by: NLorenz Bauer <lmb@cloudflare.com>
Signed-off-by: NJakub Sitnicki <jakub@cloudflare.com>
Signed-off-by: NDaniel Borkmann <daniel@iogearbox.net>
Acked-by: NJohn Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/bpf/20200309111243.6982-9-lmb@cloudflare.com

Add basic psock hooks for UDP sockets. This allows adding and
removing sockets, as well as automatic removal on unhash and close.
Signed-off-by: NLorenz Bauer <lmb@cloudflare.com>
Signed-off-by: NJakub Sitnicki <jakub@cloudflare.com>
Signed-off-by: NDaniel Borkmann <daniel@iogearbox.net>
Acked-by: NJohn Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/bpf/20200309111243.6982-8-lmb@cloudflare.com

We can take advantage of the fact that both callers of
sock_map_init_proto are holding a RCU read lock, and
have verified that psock is valid.
Signed-off-by: NLorenz Bauer <lmb@cloudflare.com>
Signed-off-by: NDaniel Borkmann <daniel@iogearbox.net>
Reviewed-by: NJakub Sitnicki <jakub@cloudflare.com>
Acked-by: NJohn Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/bpf/20200309111243.6982-7-lmb@cloudflare.com

The init, close and unhash handlers from TCP sockmap are generic,
and can be reused by UDP sockmap. Move the helpers into the sockmap code
base and expose them. This requires tcp_bpf_get_proto and tcp_bpf_clone to
be conditional on BPF_STREAM_PARSER.

The moved functions are unmodified, except that sk_psock_unlink is
renamed to sock_map_unlink to better match its behaviour.
Signed-off-by: NLorenz Bauer <lmb@cloudflare.com>
Signed-off-by: NDaniel Borkmann <daniel@iogearbox.net>
Reviewed-by: NJakub Sitnicki <jakub@cloudflare.com>
Acked-by: NJohn Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/bpf/20200309111243.6982-6-lmb@cloudflare.com

tcp_bpf.c is only included in the build if CONFIG_NET_SOCK_MSG is
selected. The declaration should therefore be guarded as such.
Signed-off-by: NLorenz Bauer <lmb@cloudflare.com>
Signed-off-by: NDaniel Borkmann <daniel@iogearbox.net>
Reviewed-by: NJakub Sitnicki <jakub@cloudflare.com>
Acked-by: NJohn Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/bpf/20200309111243.6982-5-lmb@cloudflare.com

We need to ensure that sk->sk_prot uses certain callbacks, so that
code that directly calls e.g. tcp_sendmsg in certain corner cases
works. To avoid spurious asserts, we must to do this only if
sk_psock_update_proto has not yet been called. The same invariants
apply for tcp_bpf_check_v6_needs_rebuild, so move the call as well.

Doing so allows us to merge tcp_bpf_init and tcp_bpf_reinit.
Signed-off-by: NLorenz Bauer <lmb@cloudflare.com>
Signed-off-by: NDaniel Borkmann <daniel@iogearbox.net>
Reviewed-by: NJakub Sitnicki <jakub@cloudflare.com>
Acked-by: NJohn Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/bpf/20200309111243.6982-4-lmb@cloudflare.com

Only update psock->saved_* if psock->sk_proto has not been initialized
yet. This allows us to get rid of tcp_bpf_reinit_sk_prot.
Signed-off-by: NLorenz Bauer <lmb@cloudflare.com>
Signed-off-by: NDaniel Borkmann <daniel@iogearbox.net>
Reviewed-by: NJakub Sitnicki <jakub@cloudflare.com>
Acked-by: NJohn Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/bpf/20200309111243.6982-3-lmb@cloudflare.com

The sock map code checks that a socket does not have an active upper
layer protocol before inserting it into the map. This requires casting
via inet_csk, which isn't valid for UDP sockets.

Guard checks for ULP by checking inet_sk(sk)->is_icsk first.
Signed-off-by: NLorenz Bauer <lmb@cloudflare.com>
Signed-off-by: NDaniel Borkmann <daniel@iogearbox.net>
Reviewed-by: NJakub Sitnicki <jakub@cloudflare.com>
Acked-by: NJohn Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/bpf/20200309111243.6982-2-lmb@cloudflare.com

test_run.o is not built when CONFIG_NET is not set and
bpf_prog_test_run_tracing being referenced in bpf_trace.o causes the
linker error:

ld: kernel/trace/bpf_trace.o:(.rodata+0x38): undefined reference to
 `bpf_prog_test_run_tracing'

Add a __weak function in bpf_trace.c to handle this.

Fixes: da00d2f1 ("bpf: Add test ops for BPF_PROG_TYPE_TRACING")
Signed-off-by: NKP Singh <kpsingh@google.com>
Reported-by: NRandy Dunlap <rdunlap@infradead.org>
Acked-by: NRandy Dunlap <rdunlap@infradead.org>
Signed-off-by: NAlexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20200305220127.29109-1-kpsingh@chromium.org

While well intentioned, checking CAP_MAC_ADMIN for attaching
BPF_MODIFY_RETURN tracing programs to "security_" functions is not
necessary as tracing BPF programs already require CAP_SYS_ADMIN.

Fixes: 6ba43b76 ("bpf: Attachment verification for BPF_MODIFY_RETURN")
Signed-off-by: NKP Singh <kpsingh@google.com>
Signed-off-by: NAlexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20200305204955.31123-1-kpsingh@chromium.org

Add a new entry for the 32-bit RISC-V JIT to MAINTAINERS and change
mailing list to netdev and bpf following the guidelines from
commit e42da4c6 ("docs/bpf: Update bpf development Q/A file").
Signed-off-by: NXi Wang <xi.wang@gmail.com>
Signed-off-by: NLuke Nelson <luke.r.nels@gmail.com>
Signed-off-by: NDaniel Borkmann <daniel@iogearbox.net>
Reviewed-by: NBjörn Töpel <bjorn.topel@gmail.com>
Acked-by: NBjörn Töpel <bjorn.topel@gmail.com>
Link: https://lore.kernel.org/bpf/20200305050207.4159-5-luke.r.nels@gmail.com

Update filter.txt and admin-guide to mention the BPF JIT for RV32G.
Co-developed-by: NXi Wang <xi.wang@gmail.com>
Signed-off-by: NXi Wang <xi.wang@gmail.com>
Signed-off-by: NLuke Nelson <luke.r.nels@gmail.com>
Signed-off-by: NDaniel Borkmann <daniel@iogearbox.net>
Reviewed-by: NBjörn Töpel <bjorn.topel@gmail.com>
Acked-by: NBjörn Töpel <bjorn.topel@gmail.com>
Link: https://lore.kernel.org/bpf/20200305050207.4159-4-luke.r.nels@gmail.com

This is an eBPF JIT for RV32G, adapted from the JIT for RV64G and
the 32-bit ARM JIT.

There are two main changes required for this to work compared to
the RV64 JIT.

First, eBPF registers are 64-bit, while RV32G registers are 32-bit.
BPF registers either map directly to 2 RISC-V registers, or reside
in stack scratch space and are saved and restored when used.

Second, many 64-bit ALU operations do not trivially map to 32-bit
operations. Operations that move bits between high and low words,
such as ADD, LSH, MUL, and others must emulate the 64-bit behavior
in terms of 32-bit instructions.

This patch also makes related changes to bpf_jit.h, such
as adding RISC-V instructions required by the RV32 JIT.

Supported features:

The RV32 JIT supports the same features and instructions as the
RV64 JIT, with the following exceptions:

- ALU64 DIV/MOD: Requires loops to implement on 32-bit hardware.

- BPF_XADD | BPF_DW: There's no 8-byte atomic instruction in RV32.

These features are also unsupported on other BPF JITs for 32-bit
architectures.

Testing:

- lib/test_bpf.c
test_bpf: Summary: 378 PASSED, 0 FAILED, [349/366 JIT'ed]
test_bpf: test_skb_segment: Summary: 2 PASSED, 0 FAILED

The tests that are not JITed are all due to use of 64-bit div/mod
or 64-bit xadd.

- tools/testing/selftests/bpf/test_verifier.c
Summary: 1415 PASSED, 122 SKIPPED, 43 FAILED

Tested both with and without BPF JIT hardening.

This is the same set of tests that pass using the BPF interpreter
with the JIT disabled.

Verification and synthesis:

We developed the RV32 JIT using our automated verification tool,
Serval. We have used Serval in the past to verify patches to the
RV64 JIT. We also used Serval to superoptimize the resulting code
through program synthesis.

You can find the tool and a guide to the approach and results here:
https://github.com/uw-unsat/serval-bpf/tree/rv32-jit-v5Co-developed-by: NXi Wang <xi.wang@gmail.com>
Signed-off-by: NXi Wang <xi.wang@gmail.com>
Signed-off-by: NLuke Nelson <luke.r.nels@gmail.com>
Signed-off-by: NDaniel Borkmann <daniel@iogearbox.net>
Reviewed-by: NBjörn Töpel <bjorn.topel@gmail.com>
Acked-by: NBjörn Töpel <bjorn.topel@gmail.com>
Link: https://lore.kernel.org/bpf/20200305050207.4159-3-luke.r.nels@gmail.com

This patch factors out code that can be used by both the RV64 and RV32
BPF JITs to a common bpf_jit.h and bpf_jit_core.c.

Move struct definitions and macro-like functions to header. Rename
rv_sb_insn/rv_uj_insn to rv_b_insn/rv_j_insn to match the RISC-V
specification.

Move reusable functions emit_body() and bpf_int_jit_compile() to
bpf_jit_core.c with minor simplifications. Rename emit_insn() and
build_{prologue,epilogue}() to be prefixed with "bpf_jit_" as they are
no longer static.

Rename bpf_jit_comp.c to bpf_jit_comp64.c to be more explicit.
Co-developed-by: NXi Wang <xi.wang@gmail.com>
Signed-off-by: NXi Wang <xi.wang@gmail.com>
Signed-off-by: NLuke Nelson <luke.r.nels@gmail.com>
Signed-off-by: NDaniel Borkmann <daniel@iogearbox.net>
Reviewed-by: NBjörn Töpel <bjorn.topel@gmail.com>
Acked-by: NBjörn Töpel <bjorn.topel@gmail.com>
Link: https://lore.kernel.org/bpf/20200305050207.4159-2-luke.r.nels@gmail.com

KP Singh says:

====================
v3 -> v4:

* Fix a memory leak noticed by Daniel.

v2 -> v3:

* bpf_trampoline_update_progs -> bpf_trampoline_get_progs + const
  qualification.
* Typos in commit messages.
* Added Andrii's Acks.

v1 -> v2:

* Adressed Andrii's feedback.
* Fixed a bug that Alexei noticed about nop generation.
* Rebase.

This was brought up in the KRSI v4 discussion and found to be useful
both for security and tracing programs.

  https://lore.kernel.org/bpf/20200225193108.GB22391@chromium.org/

The modify_return programs are allowed for security hooks (with an
extra CAP_MAC_ADMIN check) and functions whitelisted for error
injection (ALLOW_ERROR_INJECTION).

The "security_" check is expected to be cleaned up with the KRSI patch
series.

Here is an example of how a fmod_ret program behaves:

int func_to_be_attached(int a, int b)
{  <--- do_fentry

do_fmod_ret:
   <update ret by calling fmod_ret>
   if (ret != 0)
        goto do_fexit;

original_function:

    <side_effects_happen_here>

}  <--- do_fexit

ALLOW_ERROR_INJECTION(func_to_be_attached, ERRNO)

The fmod_ret program attached to this function can be defined as:

SEC("fmod_ret/func_to_be_attached")
int BPF_PROG(func_name, int a, int b, int ret)
{
        // This will skip the original function logic.
        return -1;
}
====================
Signed-off-by: NAlexei Starovoitov <ast@kernel.org>

Test for two scenarios:

  * When the fmod_ret program returns 0, the original function should
    be called along with fentry and fexit programs.
  * When the fmod_ret program returns a non-zero value, the original
    function should not be called, no side effect should be observed and
    fentry and fexit programs should be called.

The result from the kernel function call and whether a side-effect is
observed is returned via the retval attr of the BPF_PROG_TEST_RUN (bpf)
syscall.
Signed-off-by: NKP Singh <kpsingh@google.com>
Signed-off-by: NAlexei Starovoitov <ast@kernel.org>
Acked-by: NAndrii Nakryiko <andriin@fb.com>
Acked-by: NDaniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20200304191853.1529-8-kpsingh@chromium.org