Since commit [e58aa3d2: genirq: Run irq handlers with interrupts disabled],
We run all interrupt handlers with interrupts disabled
and we even check and yell when an interrupt handler
returns with interrupts enabled (see commit [b738a50a:
genirq: Warn when handler enables interrupts]).

So now this flag is a NOOP and can be removed.
Signed-off-by: NYong Zhang <yong.zhang0@gmail.com>
Signed-off-by: NMatthew Garrett <mjg@redhat.com>

Add three new rfkill switches in this driver that are specific to
Pegatron Lucid tablet.
Please note that you might not need all three switches. For example if
you don't have a 3G module inside your tablet.

Also, on my device, the gpio for the wifi/bt module is connected to the
bluetooth line. Therefore to activate your wireless lan interface, you
need to use the "pega-bt" rfkill switch.

Finally, the rfkill switch only works before the wireless module is
loaded the first time. Unloading ath9k doesn't help, a reboot is
necessary.
Signed-off-by: NAnisse Astier <anisse@astier.eu>
Signed-off-by: NCorentin Chary <corentincj@iksaif.net>
Signed-off-by: NMatthew Garrett <mjg@redhat.com>

Signed-off-by: NAnisse Astier <anisse@astier.eu>
Signed-off-by: NCorentin Chary <corentin.chary@gmail.com>
Signed-off-by: NMatthew Garrett <mjg@redhat.com>

Signed-off-by: NCorentin Chary <corentin.chary@gmail.com>
Signed-off-by: NMatthew Garrett <mjg@redhat.com>

Signed-off-by: NCorentin Chary <corentin.chary@gmail.com>
Signed-off-by: NMatthew Garrett <mjg@redhat.com>

Support the built-in accelerometer on the Lucid tablets as a standard
3-axis input device.
Signed-off-by: NAndy Ross <andy.ross@windriver.com>
Signed-off-by: NCorentin Chary <corentin.chary@gmail.com>
Signed-off-by: NMatthew Garrett <mjg@redhat.com>

Signed-off-by: NAndy Ross <andy.ross@windriver.com>
Signed-off-by: NCorentin Chary <corentin.chary@gmail.com>
Signed-off-by: NMatthew Garrett <mjg@redhat.com>

my samsung laptop would be very happy if you add
these lines to the file drivers/platform/x86/samsung-laptop.c

Cc: stable <stable@kernel.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: NMatthew Garrett <mjg@redhat.com>

My DMI model is this:
>dmesg |grep DMI
[    0.000000] DMI present.
[    0.000000] DMI: SAMSUNG ELECTRONICS CO., LTD. SR700/SR700, BIOS
04SR 02/20/2008

adding dmi information of Samsung R700 laptops
This adds the dmi information of Samsungs R700 laptops.
Signed-off-by: NStefan Beller <stefanbeller@googlemail.com>
Cc: stable <stable@kernel.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: NMatthew Garrett <mjg@redhat.com>

Add the corrected axis-mapping for some HP laptops.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>
Signed-off-by: NMatthew Garrett <mjg@redhat.com>

New HP laptops assign a new PNP id "HPQ6000" for DriveGuard.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>
Signed-off-by: NMatthew Garrett <mjg@redhat.com>

We need to remove devices that we destroy from the list, otherwise
we'll crash if there are more than one "_WDG" methods in DSDT.

This fixes https://bugzilla.kernel.org/show_bug.cgi?id=32052Tested-by: NIlya Tumaykin <librarian_rus@yahoo.com>
Cc: stable@kernel.org
Signed-off-by: NDmitry Torokhov <dtor@mail.ru>
Acked-by: NCarlos Corbacho <carlos@strangeworlds.co.uk>
Signed-off-by: NMatthew Garrett <mjg@redhat.com>

Replaced by the one in debugfs.
Signed-off-by: NIke Panhc <ike.pan@canonical.com>
Signed-off-by: NMatthew Garrett <mjg@redhat.com>

Add two nodes in debugfs which shows cfg value and its meaning,
and status info read from VPC2004.
Signed-off-by: NIke Panhc <ike.pan@canonical.com>
Signed-off-by: NMatthew Garrett <mjg@redhat.com>

Novo key is the Lenovo define key on every ideapads, which has two
definition. Long press and short click. Driver will report
KEY_PROG1 on short click and KEY_PROG2 when long press.

On pre-install OS for ideapads there are application waiting for
the event and there is no such application for Linux yet, so I
think to report KEY_PROG is fine in anyway.

Also change the scancode from hex to decimal because they are
related to vpc bit in notify function which is in decimal.
Signed-off-by: NIke Panhc <ike.pan@canonical.com>
Signed-off-by: NMatthew Garrett <mjg@redhat.com>

This could save us a local variable.
Signed-off-by: NIke Panhc <ike.pan@canonical.com>
Signed-off-by: NMatthew Garrett <mjg@redhat.com>

Better then write hex number everywhere.
Signed-off-by: NIke Panhc <ike.pan@canonical.com>
Signed-off-by: NMatthew Garrett <mjg@redhat.com>

We need to save major device number to be able to use it for
unregister_chrdev() in ipc_module_exit().

ipc_module_init() must return 0 on success, not major device number.
Signed-off-by: NKirill A. Shutemov <kirill.shutemov@linux.intel.com>
Signed-off-by: NAlan Cox <alan@linux.intel.com>
Signed-off-by: NMatthew Garrett <mjg@redhat.com>

Signed-off-by: NIke Panhc <ike.pan@canonical.com>
Signed-off-by: NMatthew Garrett <mjg@redhat.com>

This patch avoid a page fault in the ideapad-laptop extras when
turning the backlight power on or off.
Signed-off-by: NRene Bolldorf <xsecute@googlemail.com>
Signed-off-by: NMatthew Garrett <mjg@redhat.com>

There will be better to check the wireless capability flag
(ACER_CAP_WIRELESS) before register wireless rfkill because maybe
the machine doesn't have wifi module or the module removed by user.

Tested on Acer Travelmate 8572
Tested on Acer Aspire 4739Z
Tested-by: NAceLan Kao <acelan.kao@canonical.com>
Cc: Carlos Corbacho <carlos@strangeworlds.co.uk>
Cc: Matthew Garrett <mjg@redhat.com>
Cc: Dmitry Torokhov <dtor@mail.ru>
Cc: Corentin Chary <corentincj@iksaif.net>
Cc: Thomas Renninger <trenn@suse.de>
Signed-off-by: NLee, Chun-Yi <jlee@suse.com>
Signed-off-by: NMatthew Garrett <mjg@redhat.com>

device_create returns &struct device pointer on success, or ERR_PTR() on error.
Thus if led_classdev_register fails, led_cdev->dev is always not NULL.

Thus to unregister a successful registered led_classdev, we should check
IS_ERR_OR_NULL macro for led_cdev->dev instead of checking if led_cdev->dev
is NULL or not.

we use IS_ERR_OR_NULL instead of IS_ERR because if we havn't call
led_classdev_register, the led_cdev->dev is NULL.
Signed-off-by: NAxel Lin <axel.lin@gmail.com>
Acked-by: NCorentin Chary <corentin.chary@gmail.com>
Signed-off-by: NMatthew Garrett <mjg@redhat.com>

This patch fixes wrong test for successful registered led_classdev,
and also fixes a leak due to missing led_classdev_unregister call
for asus->kbd_led in asus_wmi_led_exit.

device_create returns &struct device pointer on success, or ERR_PTR() on error.
Thus if led_classdev_register fails, led_cdev->dev is always not NULL.

Thus to unregister a successful registered led_classdev, we should check
(!IS_ERR_OR_NULL(asus->tpd_led.dev)) instead of (asus->tpd_led.dev).

we use IS_ERR_OR_NULL instead of IS_ERR because if we havn't call
led_classdev_register, the led_cdev->dev is NULL.
Signed-off-by: NAxel Lin <axel.lin@gmail.com>
Acked-by: NCorentin Chary <corentin.chary@gmail.com>
Signed-off-by: NMatthew Garrett <mjg@redhat.com>

device_create returns &struct device pointer on success, or ERR_PTR() on error.
Thus if led_classdev_register fails, led_cdev->dev is always not NULL.

If IS_ERR(eeepc->tpd_led.dev) is ture, it means led_classdev_register fails.
If (asus->tpd_led.dev) is NULL, it means we call eeepc_led_exit before
calling led_classdev_register for &eeepc->tpd_led.

We only want to call led_classdev_unregister for sucessfully registered
led_classdev, then we should check (!IS_ERR_OR_NULL(eeepc->tpd_led.dev)).
Signed-off-by: NAxel Lin <axel.lin@gmail.com>
Acked-by: NCorentin Chary <corentin.chary@gmail.com>
Signed-off-by: NMatthew Garrett <mjg@redhat.com>

Ambient light sensor for Pegatron Lucid.  Supports pre-existing
ls_switch sysfs interface to en/disable automatic control, and exports
the brightness from the device as "ls_value".
Signed-off-by: NAndy Ross <andy.ross@windriver.com>
Signed-off-by: NCorentin Chary <corentin.chary@gmail.com>
Signed-off-by: NMatthew Garrett <mjg@redhat.com>

Recognize the Pegatron Lucid tablets by their method signatures.
Signed-off-by: NAndy Ross <andy.ross@windriver.com>
Signed-off-by: NCorentin Chary <corentin.chary@gmail.com>
Signed-off-by: NMatthew Garrett <mjg@redhat.com>

This patch depends on the "Platform: Brightness quirk for samsung
laptop driver" patch from Jason Stubbs. This patch adds a check for an
initial brightness level of 0; if the level is 0, this patch changes
the brightness level to 1 before the driver attempts to detect the
brightness quirk.

The Samsung N150 netbook experiences the brightness quirk. Without
Jason's patch, the only brightness levels available on the N150 are 0,
1, and 8. This patch ensures that, when the initial brightness level
is 0, the samsang-laptop driver detects the brightness quirk on the
N150, thereby making brightness levels 0 through 8 available.
Signed-off-by: NJohn Serock <john.serock@gmail.com>
Acked-by: NJason Stubbs <jasonbstubbs@gmail.com>
Signed-off-by: NMatthew Garrett <mjg@redhat.com>

This quirk fixes the wlan rfkill status on this machine. Without
it, wlan is permanently soft blocked whenever acer-wmi is loaded.

BugLink: https://bugs.launchpad.net/bugs/857297Signed-off-by: NSeth Forshee <seth.forshee@canonical.com>
Reviewed-by: NLee, Chun-Yi <jlee@novell.com>
Signed-off-by: NMatthew Garrett <mjg@redhat.com>

This patch supports Dell laptop with Synaptics and Alps touchpad chip
that with LED to indicate the functionality of touchpad is disabled or
enabled.

The command for touchpad LED is 0x97, and the data 1 means turn on the
touchpad LED, 2 means turn it off.

BTW, I add dell_quirks to white list those machines that supports this
behavior, so that the code won't affect those who don't have a touchpad LED
machine.

We can easily to turn it on/off by
   echo 1 > /sys/class/leds/dell-laptop::touchpad/brightness
   echo 0 > /sys/class/leds/dell-laptop::touchpad/brightness
Signed-off-by: NAceLan Kao <acelan.kao@canonical.com>
Signed-off-by: NMatthew Garrett <mjg@redhat.com>

Event 0x82 is emitted whenever a backlight event happens (brightness
change, backlight on/off).  For instance, when display is switched
off after a timeout, event 0x82 is emitted, and along with it a keypress
which switches the display back on again.

This patch adds 0x82 to the event ignore list so that the display stays
off when it is automatically switched off.
Signed-off-by: NManuel Lauss <manuel.lauss@googlemail.com>
Signed-off-by: NMatthew Garrett <mjg@redhat.com>

Signed-off-by: NSeth Forshee <seth.forshee@canonical.com>
Signed-off-by: NMatthew Garrett <mjg@redhat.com>

Test for features up-front to determine whether or not they are
supported, and avoid creating devices and proc files for
unsupported features.
Signed-off-by: NSeth Forshee <seth.forshee@canonical.com>
Signed-off-by: NMatthew Garrett <mjg@redhat.com>

Some Toshiba models, notably those with the TOS1900 device, use
the SPFC method for HCI calls instead of GHCI. Test for this method
if GHCI isn't found, and if it exists use it for all HCI calls.
Signed-off-by: NAzael Avalos <coproscefalo@gmail.com>
Signed-off-by: NSeth Forshee <seth.forshee@canonical.com>
Signed-off-by: NMatthew Garrett <mjg@redhat.com>

Now that we're using an acpi driver we already have a handle to
the namespace of the HCI call, so there's no need to test various
paths to the HCI call or even be aware of the path at all.
Signed-off-by: NAzael Avalos <coproscefalo@gmail.com>
Signed-off-by: NSeth Forshee <seth.forshee@canonical.com>
Signed-off-by: NMatthew Garrett <mjg@redhat.com>

Many routines are returning success on failure, and those that are
indicating failure frequently return incorrect error codes. Fix
these up throughout the driver.
Signed-off-by: NSeth Forshee <seth.forshee@canonical.com>
Signed-off-by: NMatthew Garrett <mjg@redhat.com>

Changes toshiba_acpi to register an acpi driver and eliminates the
platform device it was using. Also eliminates most global
variables, moving them into toshiba_acpi_dev, along with some
other miscellaneous fixes and cleanup.
Signed-off-by: NAzael Avalos <coproscefalo@gmail.com>
Signed-off-by: NSeth Forshee <seth.forshee@canonical.com>
Signed-off-by: NMatthew Garrett <mjg@redhat.com>

This is a follow-up for commit 78a7539b, which didn't cover the
Samsung N220 laptop. With this backlight brightness works nicely
on the N220 netbook.
Signed-off-by: NRaul Gutierrez Segales <rgs@collabora.co.uk>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: NMatthew Garrett <mjg@redhat.com>

This patch just adds the DMI info for the samsung laptop driver to work with
the NC210/NC110. It needs the brightness quirk patch for proper support.
Signed-off-by: NJason Stubbs <jasonbstubbs@gmail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: NMatthew Garrett <mjg@redhat.com>

On some Samsung laptops the brightness regulation works slightly different.
All SABI commands except for set_brightness work as expected. The behaviour
of set_brightness is as follows:

- Setting a new brightness will only step one level toward the new brightness
  level. For example, setting a level of 5 when the current level is 2 will
  result in a brightness level of 3.
- A spurious KEY_BRIGHTNESS_UP or KEY_BRIGHTNESS_DOWN event is also generated
  along with the change in brightness.
- Neither of the above two issues occur when changing from/to brightness
  level 0.

This patch adds detection and a non-intrusive workaround for the above issues.
Signed-off-by: NJason Stubbs <jasonbstubbs@gmail.com>
Tested-by: NDavid Herrmann <dh.herrmann@googlemail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: NMatthew Garrett <mjg@redhat.com>

samsung_init() should not return success if not all devices are initialized.
Otherwise, samsung_exit() will dereference sdev NULL pointers and others.
Signed-off-by: NDavid Herrmann <dh.herrmann@googlemail.com>
Cc: stable <stable@kernel.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: NMatthew Garrett <mjg@redhat.com>