- 02 10月, 2018 4 次提交
-
-
由 Jian Shen 提交于
This patch adds switch for flow director with ethtool command Signed-off-by: NJian Shen <shenjian15@huawei.com> Signed-off-by: NPeng Li <lipeng321@huawei.com> Signed-off-by: NSalil Mehta <salil.mehta@huawei.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Jian Shen 提交于
This patch removes all flow director rules when unload hns3 driver. Signed-off-by: NJian Shen <shenjian15@huawei.com> Signed-off-by: NPeng Li <lipeng321@huawei.com> Signed-off-by: NSalil Mehta <salil.mehta@huawei.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Jian Shen 提交于
When doing reset, remove all entries in TCAM block, and keep flow director rules list. After finishing reset, restore all entries. Signed-off-by: NJian Shen <shenjian15@huawei.com> Signed-off-by: NPeng Li <lipeng321@huawei.com> Signed-off-by: NSalil Mehta <salil.mehta@huawei.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Jian Shen 提交于
Flow director is a new feature supported by hardware with revision 0x21. This patch adds flow direcor initialization for each PF. It queries flow director mode and tcam resource from firmware, selects tuples used for input key. Signed-off-by: NJian Shen <shenjian15@huawei.com> Signed-off-by: NPeng Li <lipeng321@huawei.com> Signed-off-by: NSalil Mehta <salil.mehta@huawei.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 29 9月, 2018 4 次提交
-
-
由 Huazhong Tan 提交于
The user's coal configuration will be lost after reset, so the tx_coal and rx_coal fields are added to the struct hns_nic_priv to save the coal configuration and used to restore the user's configuration after the reset is complete. Fixes: bb6b94a8 ("net: hns3: Add reset interface implementation in client") Signed-off-by: NHuazhong Tan <tanhuazhong@huawei.com> Signed-off-by: NYunsheng Lin <linyunsheng@huawei.com> Signed-off-by: NSalil Mehta <salil.mehta@huawei.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Huazhong Tan 提交于
The current hns3_get_max_available_channels returns the total number of queues for the device, which makes ethtool -L set the number of queues per channel queues incorrectly, so hns3_get_max_available_channels should return the maximum available number of queues per channel, depending on the total number of queues allocated and the hardware configurations. Signed-off-by: NHuazhong Tan <tanhuazhong@huawei.com> Signed-off-by: NYunsheng Lin <linyunsheng@huawei.com> Signed-off-by: NPeng Li <lipeng321@huawei.com> Signed-off-by: NSalil Mehta <salil.mehta@huawei.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Yunsheng Lin 提交于
Currently hns3_nic_change_mtu will try to down the netdev before setting mtu, and it does not up the netdev when the setting fails, which causes netdev not up problem. This patch fixes it by not returning when the setting fails. Fixes: a8e8b7ff ("net: hns3: Add support to change MTU in HNS3 hardware") Signed-off-by: NYunsheng Lin <linyunsheng@huawei.com> Signed-off-by: NPeng Li <lipeng321@huawei.com> Signed-off-by: NSalil Mehta <salil.mehta@huawei.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Peng Li 提交于
This patch adds support for sctp checksum offload. Signed-off-by: NFuyun Liang <liangfuyun1@huawei.com> Signed-off-by: NPeng Li <lipeng321@huawei.com> Signed-off-by: NSalil Mehta <salil.mehta@huawei.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 22 9月, 2018 4 次提交
-
-
由 Jian Shen 提交于
There are already multiple types packets statistics for error packets, it's unnecessary to print them, which may affect the rx performance if print too many. Signed-off-by: NJian Shen <shenjian15@huawei.com> Signed-off-by: NPeng Li <lipeng321@huawei.com> Signed-off-by: NSalil Mehta <salil.mehta@huawei.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Jian Shen 提交于
For dma_mapping_error is unlikely happened, this patch adds unlikely for dma_mapping_error check. Signed-off-by: NJian Shen <shenjian15@huawei.com> Signed-off-by: NPeng Li <lipeng321@huawei.com> Signed-off-by: NSalil Mehta <salil.mehta@huawei.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Jian Shen 提交于
When nic down, it firstly calls netif_tx_stop_all_queues(), then calls napi_disable(). But napi_disable() will wait current napi_poll finish, it may call netif_tx_wake_queue(). This patch fixes it by add nic state checking. Fixes: 424eb834 ("net: hns3: Unified HNS3 {VF|PF} Ethernet Driver for hip08 SoC") Signed-off-by: NJian Shen <shenjian15@huawei.com> Signed-off-by: NPeng Li <lipeng321@huawei.com> Signed-off-by: NSalil Mehta <salil.mehta@huawei.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Jian Shen 提交于
There are a few "switch-case" codes missed handle for default case. For some abnormal case, it should return error code instead of return 0. Signed-off-by: NJian Shen <shenjian15@huawei.com> Signed-off-by: NPeng Li <lipeng321@huawei.com> Signed-off-by: NSalil Mehta <salil.mehta@huawei.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 20 9月, 2018 4 次提交
-
-
由 Xi Wang 提交于
This patch adds the .ndo_do_ioctl net_device_ops operation to support the PHY MII ioctl for PF driver. Fixes: 76ad4f0e ("net: hns3: Add support of HNS3 Ethernet Driver for hip08 SoC") Signed-off-by: NXi Wang <wangxi11@huawei.com> Signed-off-by: NPeng Li <lipeng321@huawei.com> Signed-off-by: NSalil Mehta <salil.mehta@huawei.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Peng Li 提交于
The the actual Tx work is minimal, driver can clean up as more Tx descriptors as possible in a irq. Signed-off-by: NPeng Li <lipeng321@huawei.com> Signed-off-by: NSalil Mehta <salil.mehta@huawei.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Peng Li 提交于
This patch adds unlikely for buf_num check. Signed-off-by: NPeng Li <lipeng321@huawei.com> Signed-off-by: NSalil Mehta <salil.mehta@huawei.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Peng Li 提交于
All irq will float to cpu0 if do not set irq affinity. This patch adds default irq affinity in hns3 driver, users can also change the irq affinity in OS. Signed-off-by: NPeng Li <lipeng321@huawei.com> Signed-off-by: NSalil Mehta <salil.mehta@huawei.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 04 9月, 2018 1 次提交
-
-
由 Yunsheng Lin 提交于
This patch implements shutdown ops in hns3 pci driver, which unloads the hns3 driver and set the power state to D3hot. Signed-off-by: NYunsheng Lin <linyunsheng@huawei.com> Signed-off-by: NPeng Li <lipeng321@huawei.com> Signed-off-by: NSalil Mehta <salil.mehta@huawei.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 23 8月, 2018 1 次提交
-
-
由 Huazhong Tan 提交于
'truesize' is supposed to be u32, not int, so fix it. Signed-off-by: NHuazhong tan <tanhuazhong@huawei.com> Signed-off-by: NSalil Mehta <salil.mehta@huawei.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 15 8月, 2018 3 次提交
-
-
由 Peng Li 提交于
Revision(0x20) HW does not support enabling or disabling individual netdev's HW_VLAN_CTAG_FILTER feature, and Revision(0x21) supports enabling or disabling individual netdev's HW_VLAN_CTAG_FILTER feature. Signed-off-by: NPeng Li <lipeng321@huawei.com> Signed-off-by: NSalil Mehta <salil.mehta@huawei.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Yunsheng Lin 提交于
The HNS3_RING_TX_RING_TC_REG register is used to map tx ring to specific tc, the tx queue to tc mapping is needed by the hardware to do the correct tx schedule. Signed-off-by: NYunsheng Lin <linyunsheng@huawei.com> Signed-off-by: NPeng Li <lipeng321@huawei.com> Signed-off-by: NSalil Mehta <salil.mehta@huawei.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Yunsheng Lin 提交于
There is no HNS3_RING_TX_RING_BD_LEN_REG register according to UM, so this patch removes it. Signed-off-by: NYunsheng Lin <linyunsheng@huawei.com> Signed-off-by: NPeng Li <lipeng321@huawei.com> Signed-off-by: NSalil Mehta <salil.mehta@huawei.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 08 8月, 2018 1 次提交
-
-
由 Gustavo A. R. Silva 提交于
In preparation to enabling -Wimplicit-fallthrough, mark switch cases where we are expecting to fall through. Addresses-Coverity-ID: 114789 ("Missing break in switch") Signed-off-by: NGustavo A. R. Silva <gustavo@embeddedor.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 04 8月, 2018 1 次提交
-
-
由 Jian Shen 提交于
The msix number for vf is different, depends on the max vf number. Futherly if the vf supports roce, the offset of msix is not fixed. It's incorrect to fix the msix number to 33. This patch fixes it by querying the msix number from firmware, and adjusting it with roce support. Fixes: e2cb1dec ("net: hns3: Add HNS3 VF HCL(Hardware Compatibility Layer) Support") Signed-off-by: NJian Shen <shenjian15@huawei.com> Signed-off-by: NPeng Li <lipeng321@huawei.com> Signed-off-by: NSalil Mehta <salil.mehta@huawei.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 21 7月, 2018 2 次提交
-
-
由 Jian Shen 提交于
Add the SPDX identifiers to HNS3 PF driver. Signed-off-by: NJian Shen <shenjian15@huawei.com> Signed-off-by: NPeng Li <lipeng321@huawei.com> Signed-off-by: NSalil Mehta <salil.mehta@huawei.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Jian Shen 提交于
The input parameter "dev" of hns3_irq_handle() is indeed used as a tqp vector, it is misleadin. The struct member "flag" is used to indicate ring type, so rename it. Signed-off-by: NJian Shen <shenjian15@huawei.com> Signed-off-by: NPeng Li <lipeng321@huawei.com> Signed-off-by: NSalil Mehta <salil.mehta@huawei.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 17 7月, 2018 3 次提交
-
-
由 Yunsheng Lin 提交于
handle->reset_level is assigned to HNAE3_NONE_RESET when client is initialized, if a tx timeout happens right after initialization, then handle->reset_level is not resetted to HNAE3_FUNC_RESET in hclge_reset_event, which will cause reset event not properly handled problem. This patch fixes it by setting handle->reset_level properly when client is initialized. Fixes: 6d4c3981 ("net: hns3: Changes to make enet watchdog timeout func common for PF/VF") Signed-off-by: NYunsheng Lin <linyunsheng@huawei.com> Signed-off-by: NPeng Li <lipeng321@huawei.com> Signed-off-by: NSalil Mehta <salil.mehta@huawei.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Huazhong Tan 提交于
The configuration of the ring will be used to reinitialize the ring after the hardware reset is completed. So we should not release and reacquire this configuration during reset. Fixes: bb6b94a8 ("net: hns3: Add reset interface implementation in client") Signed-off-by: NHuazhong Tan <tanhuazhong@huawei.com> Signed-off-by: NPeng Li <lipeng321@huawei.com> Signed-off-by: NSalil Mehta <salil.mehta@huawei.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Huazhong Tan 提交于
When doing reset, netdev has not been brought up is not an error, it means that we do not need do the stop operation, so just return zero. Fixes: 76ad4f0e ("net: hns3: Add support of HNS3 Ethernet Driver for hip08 SoC") Signed-off-by: NHuazhong Tan <tanhuazhong@huawei.com> Signed-off-by: NPeng Li <lipeng321@huawei.com> Signed-off-by: NSalil Mehta <salil.mehta@huawei.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 07 7月, 2018 2 次提交
-
-
由 Yunsheng Lin 提交于
Hardware only support tcp/udp/sctp l4 checksum offload, but the driver currently tell hardware to do l4 checksum offlad when l3 is IPv4 or IPv6, which may cause checksumm error. This patch fixes it by only enabling the l4 offload when l4 is tcp/udp/sctp. Fixes: 76ad4f0e ("net: hns3: Add support of HNS3 Ethernet Driver for hip08 SoC") Signed-off-by: NYunsheng Lin <linyunsheng@huawei.com> Signed-off-by: NPeng Li <lipeng321@huawei.com> Signed-off-by: NSalil Mehta <salil.mehta@huawei.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Yunsheng Lin 提交于
Currently, tc related configuration is not setup when the netdev is first up, which cause the stack only using tc 0 problem. This patch fixes it by setting the tc related configuration using the info from NCL_CONFIG when netdev is first up. Fixes: 76ad4f0e ("net: hns3: Add support of HNS3 Ethernet Driver for hip08 SoC") Signed-off-by: NYunsheng Lin <linyunsheng@huawei.com> Signed-off-by: NPeng Li <lipeng321@huawei.com> Signed-off-by: NSalil Mehta <salil.mehta@huawei.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 04 7月, 2018 1 次提交
-
-
由 Colin Ian King 提交于
Variable 'protocol' is being assigned but is never used hence it is redundant and can be removed. Cleans up clang warning: warning: variable 'protocol' set but not used [-Wunused-but-set-variable] Signed-off-by: NColin Ian King <colin.king@canonical.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 02 7月, 2018 2 次提交
-
-
由 Peng Li 提交于
For consistency, prefix hnae_ should be modified to hnae3_. Signed-off-by: NPeng Li <lipeng321@huawei.com> Signed-off-by: NHuazhong Tan <tanhuazhong@huawei.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Huazhong Tan 提交于
Reference to Documentation/DMA-API-HOWTO.txt, Streaming DMA mappings which are usually mapped for one DMA transfer, Network card DMA ring descriptors should use Consistent DMA mappings. Signed-off-by: NHuazhong Tan <tanhuazhong@huawei.com> Signed-off-by: NPeng Li <lipeng321@huawei.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 29 6月, 2018 3 次提交
-
-
由 Peng Li 提交于
The interface h->ae_algo->ops->put_vector is called in both hns3_nic_dealloc_vector_data and hns3_nic_uninit_vector_data in hns3_client_uninit, this will cause vector freed twice. This patch remove the Redundant put_vector to make vector freed only once. Signed-off-by: NPeng Li <lipeng321@huawei.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Peng Li 提交于
The first bd of a packet is invalid and invalid ring head for tx IRQ is not offen, they may occur when there is error, Add unlikely for error check branch is better for performance. Signed-off-by: NPeng Li <lipeng321@huawei.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Peng Li 提交于
HW supports UDP, TCP and SCTP packets checksum for both ipv4 and ipv6, but do not support other type packets checksum for ipv4 or ipv6. Signed-off-by: NPeng Li <lipeng321@huawei.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 13 6月, 2018 1 次提交
-
-
由 Kees Cook 提交于
The devm_kzalloc() function has a 2-factor argument form, devm_kcalloc(). This patch replaces cases of: devm_kzalloc(handle, a * b, gfp) with: devm_kcalloc(handle, a * b, gfp) as well as handling cases of: devm_kzalloc(handle, a * b * c, gfp) with: devm_kzalloc(handle, array3_size(a, b, c), gfp) as it's slightly less ugly than: devm_kcalloc(handle, array_size(a, b), c, gfp) This does, however, attempt to ignore constant size factors like: devm_kzalloc(handle, 4 * 1024, gfp) though any constants defined via macros get caught up in the conversion. Any factors with a sizeof() of "unsigned char", "char", and "u8" were dropped, since they're redundant. Some manual whitespace fixes were needed in this patch, as Coccinelle really liked to write "=devm_kcalloc..." instead of "= devm_kcalloc...". The Coccinelle script used for this was: // Fix redundant parens around sizeof(). @@ expression HANDLE; type TYPE; expression THING, E; @@ ( devm_kzalloc(HANDLE, - (sizeof(TYPE)) * E + sizeof(TYPE) * E , ...) | devm_kzalloc(HANDLE, - (sizeof(THING)) * E + sizeof(THING) * E , ...) ) // Drop single-byte sizes and redundant parens. @@ expression HANDLE; expression COUNT; typedef u8; typedef __u8; @@ ( devm_kzalloc(HANDLE, - sizeof(u8) * (COUNT) + COUNT , ...) | devm_kzalloc(HANDLE, - sizeof(__u8) * (COUNT) + COUNT , ...) | devm_kzalloc(HANDLE, - sizeof(char) * (COUNT) + COUNT , ...) | devm_kzalloc(HANDLE, - sizeof(unsigned char) * (COUNT) + COUNT , ...) | devm_kzalloc(HANDLE, - sizeof(u8) * COUNT + COUNT , ...) | devm_kzalloc(HANDLE, - sizeof(__u8) * COUNT + COUNT , ...) | devm_kzalloc(HANDLE, - sizeof(char) * COUNT + COUNT , ...) | devm_kzalloc(HANDLE, - sizeof(unsigned char) * COUNT + COUNT , ...) ) // 2-factor product with sizeof(type/expression) and identifier or constant. @@ expression HANDLE; type TYPE; expression THING; identifier COUNT_ID; constant COUNT_CONST; @@ ( - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(TYPE) * (COUNT_ID) + COUNT_ID, sizeof(TYPE) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(TYPE) * COUNT_ID + COUNT_ID, sizeof(TYPE) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(TYPE) * (COUNT_CONST) + COUNT_CONST, sizeof(TYPE) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(TYPE) * COUNT_CONST + COUNT_CONST, sizeof(TYPE) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(THING) * (COUNT_ID) + COUNT_ID, sizeof(THING) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(THING) * COUNT_ID + COUNT_ID, sizeof(THING) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(THING) * (COUNT_CONST) + COUNT_CONST, sizeof(THING) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(THING) * COUNT_CONST + COUNT_CONST, sizeof(THING) , ...) ) // 2-factor product, only identifiers. @@ expression HANDLE; identifier SIZE, COUNT; @@ - devm_kzalloc + devm_kcalloc (HANDLE, - SIZE * COUNT + COUNT, SIZE , ...) // 3-factor product with 1 sizeof(type) or sizeof(expression), with // redundant parens removed. @@ expression HANDLE; expression THING; identifier STRIDE, COUNT; type TYPE; @@ ( devm_kzalloc(HANDLE, - sizeof(TYPE) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | devm_kzalloc(HANDLE, - sizeof(TYPE) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | devm_kzalloc(HANDLE, - sizeof(TYPE) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | devm_kzalloc(HANDLE, - sizeof(TYPE) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | devm_kzalloc(HANDLE, - sizeof(THING) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | devm_kzalloc(HANDLE, - sizeof(THING) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | devm_kzalloc(HANDLE, - sizeof(THING) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | devm_kzalloc(HANDLE, - sizeof(THING) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) ) // 3-factor product with 2 sizeof(variable), with redundant parens removed. @@ expression HANDLE; expression THING1, THING2; identifier COUNT; type TYPE1, TYPE2; @@ ( devm_kzalloc(HANDLE, - sizeof(TYPE1) * sizeof(TYPE2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | devm_kzalloc(HANDLE, - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | devm_kzalloc(HANDLE, - sizeof(THING1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | devm_kzalloc(HANDLE, - sizeof(THING1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | devm_kzalloc(HANDLE, - sizeof(TYPE1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) | devm_kzalloc(HANDLE, - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) ) // 3-factor product, only identifiers, with redundant parens removed. @@ expression HANDLE; identifier STRIDE, SIZE, COUNT; @@ ( devm_kzalloc(HANDLE, - (COUNT) * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | devm_kzalloc(HANDLE, - COUNT * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | devm_kzalloc(HANDLE, - COUNT * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | devm_kzalloc(HANDLE, - (COUNT) * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | devm_kzalloc(HANDLE, - COUNT * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | devm_kzalloc(HANDLE, - (COUNT) * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | devm_kzalloc(HANDLE, - (COUNT) * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | devm_kzalloc(HANDLE, - COUNT * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) ) // Any remaining multi-factor products, first at least 3-factor products, // when they're not all constants... @@ expression HANDLE; expression E1, E2, E3; constant C1, C2, C3; @@ ( devm_kzalloc(HANDLE, C1 * C2 * C3, ...) | devm_kzalloc(HANDLE, - (E1) * E2 * E3 + array3_size(E1, E2, E3) , ...) | devm_kzalloc(HANDLE, - (E1) * (E2) * E3 + array3_size(E1, E2, E3) , ...) | devm_kzalloc(HANDLE, - (E1) * (E2) * (E3) + array3_size(E1, E2, E3) , ...) | devm_kzalloc(HANDLE, - E1 * E2 * E3 + array3_size(E1, E2, E3) , ...) ) // And then all remaining 2 factors products when they're not all constants, // keeping sizeof() as the second factor argument. @@ expression HANDLE; expression THING, E1, E2; type TYPE; constant C1, C2, C3; @@ ( devm_kzalloc(HANDLE, sizeof(THING) * C2, ...) | devm_kzalloc(HANDLE, sizeof(TYPE) * C2, ...) | devm_kzalloc(HANDLE, C1 * C2 * C3, ...) | devm_kzalloc(HANDLE, C1 * C2, ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(TYPE) * (E2) + E2, sizeof(TYPE) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(TYPE) * E2 + E2, sizeof(TYPE) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(THING) * (E2) + E2, sizeof(THING) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(THING) * E2 + E2, sizeof(THING) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - (E1) * E2 + E1, E2 , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - (E1) * (E2) + E1, E2 , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - E1 * E2 + E1, E2 , ...) ) Signed-off-by: NKees Cook <keescook@chromium.org>
-
- 02 6月, 2018 3 次提交
-
-
由 Xi Wang 提交于
In the current process, the multicast MAC is added to both MAC_VLAN table and MTA table, this will reduce the utilization of the resource. This patch improves the process of adding multicast MAC address, the new process starts using the MTA table to add multicast MAC after the MAC_VLAN table is full, and the MTA is disable if it is no longer used. Signed-off-by: NXi Wang <wangxi11@huawei.com> Reviewed-by: NJian Shen <shenjian15@huawei.com> Signed-off-by: NPeng Li <lipeng321@huawei.com> Signed-off-by: NSalil Mehta <salil.mehta@huawei.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Yunsheng Lin 提交于
when skb->encapsulation is 0, skb->ip_summed is CHECKSUM_PARTIAL and it is udp packet, which has a dest port as the IANA assigned. the hardware is expected to do the checksum offload, but the hardware will not do the checksum offload when udp dest port is 4789. This patch fixes it by doing the checksum in software. Fixes: 76ad4f0e ("net: hns3: Add support of HNS3 Ethernet Driver for hip08 SoC") Signed-off-by: NYunsheng Lin <linyunsheng@huawei.com> Signed-off-by: NPeng Li <lipeng321@huawei.com> Signed-off-by: NSalil Mehta <salil.mehta@huawei.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Jian Shen 提交于
When doing function reset or insmod hns3 dirver after rmmod, the entries of mac vlan table are not cleared, which may cause init mac address failed. This patch fixes it by clearing the old mac address when doing function reset or rmmod hns3 driver. Fixes: 76ad4f0e ("net: hns3: Add support of HNS3 Ethernet Driver for hip08 SoC") Signed-off-by: NJian Shen <shenjian15@huawei.com> Signed-off-by: NPeng Li <lipeng321@huawei.com> Signed-off-by: NSalil Mehta <salil.mehta@huawei.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-