stable inclusion
from stable-v5.10.104
commit 6d4985b8a0bf716dba5ae2caefcd906e9ca3df03
bugzilla: https://gitee.com/openeuler/kernel/issues/I56XAC

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=6d4985b8a0bf716dba5ae2caefcd906e9ca3df03

--------------------------------

[ Upstream commit 5bfa685e ]

It appears that a read access to GIC[DR]_I[CS]PENDRn doesn't always
result in the pending interrupts being accurately reported if they are
mapped to a HW interrupt. This is particularily visible when acking
the timer interrupt and reading the GICR_ISPENDR1 register immediately
after, for example (the interrupt appears as not-pending while it really
is...).

This is because a HW interrupt has its 'active and pending state' kept
in the *physical* distributor, and not in the virtual one, as mandated
by the spec (this is what allows the direct deactivation). The virtual
distributor only caries the pending and active *states* (note the
plural, as these are two independent and non-overlapping states).

Fix it by reading the HW state back, either from the timer itself or
from the distributor if necessary.
Reported-by: NRicardo Koller <ricarkol@google.com>
Tested-by: NRicardo Koller <ricarkol@google.com>
Reviewed-by: NRicardo Koller <ricarkol@google.com>
Signed-off-by: NMarc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20220208123726.3604198-1-maz@kernel.orgSigned-off-by: NSasha Levin <sashal@kernel.org>
Signed-off-by: NYu Liao <liaoyu15@huawei.com>
Reviewed-by: NWei Li <liwei391@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

stable inclusion
from stable-v5.10.104
commit 5d4b00e053fc67d1517684050f7720978dc92c48
bugzilla: https://gitee.com/openeuler/kernel/issues/I56XAC

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=5d4b00e053fc67d1517684050f7720978dc92c48

--------------------------------

[ Upstream commit 37ef4c19 ]

Buttonpads are expected to map the INPUT_PROP_BUTTONPAD property bit
and the BTN_LEFT key bit.

As explained in the specification, where a device has a button type
value of 0 (click-pad) or 1 (pressure-pad) there should not be
discrete buttons:
https://docs.microsoft.com/en-us/windows-hardware/design/component-guidelines/touchpad-windows-precision-touchpad-collection#device-capabilities-feature-report

However, some drivers map the BTN_RIGHT and/or BTN_MIDDLE key bits even
though the device is a buttonpad and therefore does not have those
buttons.

This behavior has forced userspace applications like libinput to
implement different workarounds and quirks to detect buttonpads and
offer to the user the right set of features and configuration options.
For more information:
https://gitlab.freedesktop.org/libinput/libinput/-/merge_requests/726

In order to avoid this issue clear the BTN_RIGHT and BTN_MIDDLE key
bits when the input device is register if the INPUT_PROP_BUTTONPAD
property bit is set.

Notice that this change will not affect udev because it does not check
for buttons. See systemd/src/udev/udev-builtin-input_id.c.

List of known affected hardware:

 - Chuwi AeroBook Plus
 - Chuwi Gemibook
 - Framework Laptop
 - GPD Win Max
 - Huawei MateBook 2020
 - Prestigio Smartbook 141 C2
 - Purism Librem 14v1
 - StarLite Mk II   - AMI firmware
 - StarLite Mk II   - Coreboot firmware
 - StarLite Mk III  - AMI firmware
 - StarLite Mk III  - Coreboot firmware
 - StarLabTop Mk IV - AMI firmware
 - StarLabTop Mk IV - Coreboot firmware
 - StarBook Mk V
Acked-by: NPeter Hutterer <peter.hutterer@who-t.net>
Acked-by: NBenjamin Tissoires <benjamin.tissoires@redhat.com>
Acked-by: NJiri Kosina <jkosina@suse.cz>
Signed-off-by: NJosé Expósito <jose.exposito89@gmail.com>
Link: https://lore.kernel.org/r/20220208174806.17183-1-jose.exposito89@gmail.comSigned-off-by: NDmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: NSasha Levin <sashal@kernel.org>
Signed-off-by: NYu Liao <liaoyu15@huawei.com>
Reviewed-by: NWei Li <liwei391@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

stable inclusion
from stable-v5.10.104
commit 6e7015d982ee8defa4b45e652b177800bb38c213
bugzilla: https://gitee.com/openeuler/kernel/issues/I56XAC

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=6e7015d982ee8defa4b45e652b177800bb38c213

--------------------------------

[ Upstream commit 4e2a354e ]

The check done by regulator_late_cleanup() to detect whether a regulator
is on was inconsistent with the check done by _regulator_is_enabled().
While _regulator_is_enabled() takes the enable GPIO into account,
regulator_late_cleanup() was not doing that.

This resulted in a false positive, e.g. when a GPIO-controlled fixed
regulator was used, which was not enabled at boot time, e.g.

reg_disp_1v2: reg_disp_1v2 {
	compatible = "regulator-fixed";
	regulator-name = "display_1v2";
	regulator-min-microvolt = <1200000>;
	regulator-max-microvolt = <1200000>;
	gpio = <&tlmm 148 0>;
	enable-active-high;
};

Such regulator doesn't have an is_enabled() operation. Nevertheless
it's state can be determined based on the enable GPIO. The check in
regulator_late_cleanup() wrongly assumed that the regulator is on and
tried to disable it.
Signed-off-by: NOliver Barta <oliver.barta@aptiv.com>
Link: https://lore.kernel.org/r/20220208084645.8686-1-oliver.barta@aptiv.comSigned-off-by: NMark Brown <broonie@kernel.org>
Signed-off-by: NSasha Levin <sashal@kernel.org>
Signed-off-by: NYu Liao <liaoyu15@huawei.com>
Reviewed-by: NWei Li <liwei391@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

stable inclusion
from stable-v5.10.104
commit 467d664e5fff7a4069ab5fd2fad95773d3df39e9
bugzilla: https://gitee.com/openeuler/kernel/issues/I56XAC

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=467d664e5fff7a4069ab5fd2fad95773d3df39e9

--------------------------------

[ Upstream commit 4c33de06 ]

The current rt5682_jack_detect_handler() assumes the component
and card will always show up and implements an infinite usleep
loop waiting for them to show up.

This does not hold true if a codec interrupt (or other
event) occurs when the card is unbound. The codec driver's
remove  or shutdown functions cannot cancel the workqueue due
to the wait loop. As a result, code can either end up blocking
the workqueue, or hit a kernel oops when the card is freed.

Fix the issue by rescheduling the jack detect handler in
case the card is not ready. In case card never shows up,
the shutdown/remove/suspend calls can now cancel the detect
task.
Signed-off-by: NKai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: NBard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: NRanjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: NPierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: NPéter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: NShuming Fan <shumingf@realtek.com>
Link: https://lore.kernel.org/r/20220207153000.3452802-3-kai.vehmanen@linux.intel.comSigned-off-by: NMark Brown <broonie@kernel.org>
Signed-off-by: NSasha Levin <sashal@kernel.org>
Signed-off-by: NYu Liao <liaoyu15@huawei.com>
Reviewed-by: NWei Li <liwei391@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

stable inclusion
from stable-v5.10.104
commit 0b050b7a0d733526c34cd4cf1e42afee34efac5d
bugzilla: https://gitee.com/openeuler/kernel/issues/I56XAC

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=0b050b7a0d733526c34cd4cf1e42afee34efac5d

--------------------------------

[ Upstream commit a6d78661 ]

The current rt5668_jack_detect_handler() assumes the component
and card will always show up and implements an infinite usleep
loop waiting for them to show up.

This does not hold true if a codec interrupt (or other
event) occurs when the card is unbound. The codec driver's
remove  or shutdown functions cannot cancel the workqueue due
to the wait loop. As a result, code can either end up blocking
the workqueue, or hit a kernel oops when the card is freed.

Fix the issue by rescheduling the jack detect handler in
case the card is not ready. In case card never shows up,
the shutdown/remove/suspend calls can now cancel the detect
task.
Signed-off-by: NKai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: NBard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: NRanjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: NPierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: NPéter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: NShuming Fan <shumingf@realtek.com>
Link: https://lore.kernel.org/r/20220207153000.3452802-2-kai.vehmanen@linux.intel.comSigned-off-by: NMark Brown <broonie@kernel.org>
Signed-off-by: NSasha Levin <sashal@kernel.org>
Signed-off-by: NYu Liao <liaoyu15@huawei.com>
Reviewed-by: NWei Li <liwei391@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

stable inclusion
from stable-v5.10.104
commit 11956c6eeb5a29cdb0747fca6f0b8fb997a8aef2
bugzilla: https://gitee.com/openeuler/kernel/issues/I56XAC

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=11956c6eeb5a29cdb0747fca6f0b8fb997a8aef2

--------------------------------

[ Upstream commit 9495b9b3 ]

The CLKT register contains at poweron 0x40, which at our typical 100kHz
bus rate means .64ms. But there is no specified limit to how long devices
should be able to stretch the clocks, so just disable the timeout. We
still have a timeout wrapping the entire transfer.
Signed-off-by: NEric Anholt <eric@anholt.net>
Signed-off-by: NStefan Wahren <stefan.wahren@i2se.com>
BugLink: https://github.com/raspberrypi/linux/issues/3064Signed-off-by: NWolfram Sang <wsa@kernel.org>
Signed-off-by: NSasha Levin <sashal@kernel.org>
Signed-off-by: NYu Liao <liaoyu15@huawei.com>
Reviewed-by: NWei Li <liwei391@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

stable inclusion
from stable-v5.10.104
commit 13f0ea8d11934a017f5c353fa049a09de3c37ec0
bugzilla: https://gitee.com/openeuler/kernel/issues/I56XAC

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=13f0ea8d11934a017f5c353fa049a09de3c37ec0

--------------------------------

[ Upstream commit cacfddf8 ]

In mac80211_hwsim, the probe_req frame is created and sent while
scanning. It is sent with ieee80211_tx_info which is not initialized.
Uninitialized ieee80211_tx_info can cause problems when using
mac80211_hwsim with wmediumd. wmediumd checks the tx_rates field of
ieee80211_tx_info and doesn't relay probe_req frame to other clients
even if it is a broadcasting message.

Call ieee80211_tx_prepare_skb() to initialize ieee80211_tx_info for
the probe_req that is created by hw_scan_work in mac80211_hwsim.
Signed-off-by: NJaeMan Park <jaeman@google.com>
Link: https://lore.kernel.org/r/20220113060235.546107-1-jaeman@google.com
[fix memory leak]
Signed-off-by: NJohannes Berg <johannes.berg@intel.com>
Signed-off-by: NSasha Levin <sashal@kernel.org>
Signed-off-by: NYu Liao <liaoyu15@huawei.com>
Reviewed-by: NWei Li <liwei391@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

stable inclusion
from stable-v5.10.104
commit 46f6d66219b5d68854be1c53ce438d2112b2fe34
bugzilla: https://gitee.com/openeuler/kernel/issues/I56XAC

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=46f6d66219b5d68854be1c53ce438d2112b2fe34

--------------------------------

[ Upstream commit 42a79960 ]

Add IEEE80211_TX_STAT_NOACK_TRANSMITTED to tx_status flags to have proper
statistics for non-acked frames.
Signed-off-by: NBenjamin Beichler <benjamin.beichler@uni-rostock.de>
Link: https://lore.kernel.org/r/20220111221327.1499881-1-benjamin.beichler@uni-rostock.deSigned-off-by: NJohannes Berg <johannes.berg@intel.com>
Signed-off-by: NSasha Levin <sashal@kernel.org>
Signed-off-by: NYu Liao <liaoyu15@huawei.com>
Reviewed-by: NWei Li <liwei391@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

hulk inclusion
category: bugfix
bugzilla: 186819 https://gitee.com/openeuler/kernel/issues/I58L00

--------------------------------

The gic_arch_restore_irqs() depends on commit e7e6a881 ("arm64:
irqflags: fix incomplete save & restore"). While it is reverted in commit
2e680920 ("Revert "arm64: irqflags: fix incomplete save & restore""),
we should update the logic here too.

Currently the upper 32 bits of 'flags' is always zero, change to use
'GIC_PRIO_PSR_I_SET' to indicate the interrupt enabling status.

Fixes: abde6b94 ("stop_machine: mask pseudo nmi before running the callback")
Signed-off-by: NWei Li <liwei391@huawei.com>
Reviewed-by: NCheng Jian <cj.chengjian@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

mainline inclusion
from mainline-v5.18-rc6
commit b2d05756
category: bugfix
bugzilla: https://gitee.com/src-openeuler/kernel/issues/I57M5L
CVE: CVE-2022-1012

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=b2d057560b8107c633b39aabe517ff9d93f285e3

--------------------------------

SipHash replaced MD5 in secure_ipv{4,6}_port_ephemeral() via commit
7cd23e53 ("secure_seq: use SipHash in place of MD5"), but the output
remained truncated to 32-bit only. In order to exploit more bits from the
hash, let's make the functions return the full 64-bit of siphash_3u32().
We also make sure the port offset calculation in __inet_hash_connect()
remains done on 32-bit to avoid the need for div_u64_rem() and an extra
cost on 32-bit systems.

Cc: Jason A. Donenfeld <Jason@zx2c4.com>
Cc: Moshe Kol <moshe.kol@mail.huji.ac.il>
Cc: Yossi Gilad <yossi.gilad@mail.huji.ac.il>
Cc: Amit Klein <aksecurity@gmail.com>
Reviewed-by: NEric Dumazet <edumazet@google.com>
Signed-off-by: NWilly Tarreau <w@1wt.eu>
Signed-off-by: NJakub Kicinski <kuba@kernel.org>

Conflicts:
	net/ipv4/inet_hashtables.c
Signed-off-by: NBaisong Zhong <zhongbaisong@huawei.com>
Reviewed-by: NXiu Jianfeng <xiujianfeng@huawei.com>
Reviewed-by: NWei Yongjun <weiyongjun1@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

virt inclusion
category: bugfix
bugzilla: https://gitee.com/openeuler/kernel/issues/I573P1
CVE: NA

------------------------------

Some parameters in iommu_clear_dirty_log/vfio_iova_dirty_log_clear
have uncorrect type, which used in bitmap operations. In some cases,
it will cause data overflow.

Fixes: bbf3b39e (iommu: Introduce dirty log tracking framework)
Fixes: f1c9b9fa (vfio/iommu_type1: Add support for manual dirty log clear)
Signed-off-by: NKunkun Jiang <jiangkunkun@huawei.com>
Reviewed-by: NKeqian Zhu <zhukeqian1@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

stable inclusion
from stable-v5.10.102
commit 4f523f15e5d753ac055302bc29ca9677d6692eed
bugzilla: https://gitee.com/openeuler/kernel/issues/I575QT

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=4f523f15e5d753ac055302bc29ca9677d6692eed

--------------------------------

commit 0b0dff5b upstream.

Ipv6 flowlabels historically require a reservation before use.
Optionally in exclusive mode (e.g., user-private).

Commit 59c820b2 ("ipv6: elide flowlabel check if no exclusive
leases exist") introduced a fastpath that avoids this check when no
exclusive leases exist in the system, and thus any flowlabel use
will be granted.

That allows skipping the control operation to reserve a flowlabel
entirely. Though with a warning if the fast path fails:

  This is an optimization. Robust applications still have to revert to
  requesting leases if the fast path fails due to an exclusive lease.

Still, this is subtle. Better isolate network namespaces from each
other. Flowlabels are per-netns. Also record per-netns whether
exclusive leases are in use. Then behavior does not change based on
activity in other netns.

Changes
  v2
    - wrap in IS_ENABLED(CONFIG_IPV6) to avoid breakage if disabled

Fixes: 59c820b2 ("ipv6: elide flowlabel check if no exclusive leases exist")
Link: https://lore.kernel.org/netdev/MWHPR2201MB1072BCCCFCE779E4094837ACD0329@MWHPR2201MB1072.namprd22.prod.outlook.com/Reported-by: NCongyu Liu <liu3101@purdue.edu>
Signed-off-by: NWillem de Bruijn <willemb@google.com>
Tested-by: NCongyu Liu <liu3101@purdue.edu>
Link: https://lore.kernel.org/r/20220215160037.1976072-1-willemdebruijn.kernel@gmail.comSigned-off-by: NJakub Kicinski <kuba@kernel.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: NWang Yufen <wangyufen@huawei.com>
Reviewed-by: NWei Yongjun <weiyongjun1@huawei.com>
Reviewed-by: NYue Haibing <yuehaibing@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

stable inclusion
from stable-v5.10.103
commit 78706b051a8a314b55f13bcef3351e7d8e974a88
bugzilla: https://gitee.com/openeuler/kernel/issues/I56NE7

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=78706b051a8a314b55f13bcef3351e7d8e974a88

--------------------------------

commit c94afc46 upstream.

memblock.{reserved,memory}.regions may be allocated using kmalloc() in
memblock_double_array(). Use kfree() to release these kmalloced regions
indicated by memblock_{reserved,memory}_in_slab.
Signed-off-by: NMiaohe Lin <linmiaohe@huawei.com>
Fixes: 3010f876 ("mm: discard memblock data later")
Signed-off-by: NMike Rapoport <rppt@linux.ibm.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: NYu Liao <liaoyu15@huawei.com>
Reviewed-by: NWei Li <liwei391@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

stable inclusion
from stable-v5.10.103
commit 4185b788d3adc9e66b5b9c959b91ae17b8488fc3
bugzilla: https://gitee.com/openeuler/kernel/issues/I56NE7

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=4185b788d3adc9e66b5b9c959b91ae17b8488fc3

--------------------------------

commit d1e972ac upstream.

The tegra186 GPIO driver makes the assumption that the pointer
returned by irq_data_get_irq_chip_data() is a pointer to a
tegra_gpio structure. Unfortunately, it is actually a pointer
to the inner gpio_chip structure, as mandated by the gpiolib
infrastructure. Nice try.

The saving grace is that the gpio_chip is the first member of
tegra_gpio, so the bug has gone undetected since... forever.

Fix it by performing a container_of() on the pointer. This results
in no additional code, and makes it possible to understand how
the whole thing works.

Fixes: 5b2b135a ("gpio: Add Tegra186 support")
Signed-off-by: NMarc Zyngier <maz@kernel.org>
Cc: Thierry Reding <treding@nvidia.com>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Link: https://lore.kernel.org/r/20220211093904.1112679-1-maz@kernel.orgSigned-off-by: NLinus Walleij <linus.walleij@linaro.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: NYu Liao <liaoyu15@huawei.com>
Reviewed-by: NWei Li <liwei391@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

stable inclusion
from stable-v5.10.103
commit bb2e0a77235a1b083a255c462cbacfb40def9a58
bugzilla: https://gitee.com/openeuler/kernel/issues/I56NE7

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=bb2e0a77235a1b083a255c462cbacfb40def9a58

--------------------------------

commit a2ab75b8 upstream.

In the current implementation the user may open a virtual tty which then
could fail to establish the underlying DLCI. The function gsmtty_open()
gets stuck in tty_port_block_til_ready() while waiting for a carrier rise.
This happens if the remote side fails to acknowledge the link establishment
request in time or completely. At some point gsm_dlci_close() is called
to abort the link establishment attempt. The function tries to inform the
associated virtual tty by performing a hangup. But the blocking loop within
tty_port_block_til_ready() is not informed about this event.
The patch proposed here fixes this by resetting the initialization state of
the virtual tty to ensure the loop exits and triggering it to make
tty_port_block_til_ready() return.

Fixes: e1eaea46 ("tty: n_gsm line discipline")
Cc: stable@vger.kernel.org
Signed-off-by: NDaniel Starke <daniel.starke@siemens.com>
Link: https://lore.kernel.org/r/20220218073123.2121-7-daniel.starke@siemens.comSigned-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: NYu Liao <liaoyu15@huawei.com>
Reviewed-by: NWei Li <liwei391@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

stable inclusion
from stable-v5.10.103
commit e4c8cb95d03543c721e7a1265253eda2ce1b8370
bugzilla: https://gitee.com/openeuler/kernel/issues/I56NE7

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=e4c8cb95d03543c721e7a1265253eda2ce1b8370

--------------------------------

commit c19d9354 upstream.

tty flow control is handled via gsmtty_throttle() and gsmtty_unthrottle().
Both functions propagate the outgoing hardware flow control state to the
remote side via MSC (modem status command) frames. The local state is taken
from the RTS (ready to send) flag of the tty. However, RTS gets mapped to
DTR (data terminal ready), which is wrong.
This patch corrects this by mapping RTS to RTS.

Fixes: e1eaea46 ("tty: n_gsm line discipline")
Cc: stable@vger.kernel.org
Signed-off-by: NDaniel Starke <daniel.starke@siemens.com>
Link: https://lore.kernel.org/r/20220218073123.2121-5-daniel.starke@siemens.comSigned-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: NYu Liao <liaoyu15@huawei.com>
Reviewed-by: NWei Li <liwei391@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

stable inclusion
from stable-v5.10.103
commit 1f0641dd0b6c60093825337563e1c9abec41757c
bugzilla: https://gitee.com/openeuler/kernel/issues/I56NE7

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=1f0641dd0b6c60093825337563e1c9abec41757c

--------------------------------

commit 96b169f0 upstream.

The here fixed commit made the tty hangup asynchronous to avoid a circular
locking warning. I could not reproduce this warning. Furthermore, due to
the asynchronous hangup the function call now gets queued up while the
underlying tty is being freed. Depending on the timing this results in a
NULL pointer access in the global work queue scheduler. To be precise in
process_one_work(). Therefore, the previous commit made the issue worse
which it tried to fix.

This patch fixes this by falling back to the old behavior which uses a
blocking tty hangup call before freeing up the associated tty.

Fixes: 7030082a ("tty: n_gsm: avoid recursive locking with async port hangup")
Cc: stable@vger.kernel.org
Signed-off-by: NDaniel Starke <daniel.starke@siemens.com>
Link: https://lore.kernel.org/r/20220218073123.2121-4-daniel.starke@siemens.comSigned-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: NYu Liao <liaoyu15@huawei.com>
Reviewed-by: NWei Li <liwei391@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

stable inclusion
from stable-v5.10.103
commit 1e35cb9e1271816035089d80b867e2662e3bee54
bugzilla: https://gitee.com/openeuler/kernel/issues/I56NE7

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=1e35cb9e1271816035089d80b867e2662e3bee54

--------------------------------

commit e3b7468f upstream.

Trying to open a DLCI by sending a SABM frame may fail with a timeout.
The link is closed on the initiator side without informing the responder
about this event. The responder assumes the link is open after sending a
UA frame to answer the SABM frame. The link gets stuck in a half open
state.

This patch fixes this by initiating the proper link termination procedure
after link setup timeout instead of silently closing it down.

Fixes: e1eaea46 ("tty: n_gsm line discipline")
Cc: stable@vger.kernel.org
Signed-off-by: NDaniel Starke <daniel.starke@siemens.com>
Link: https://lore.kernel.org/r/20220218073123.2121-3-daniel.starke@siemens.comSigned-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: NYu Liao <liaoyu15@huawei.com>
Reviewed-by: NWei Li <liwei391@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

stable inclusion
from stable-v5.10.103
commit 90b47e617fb277173dd62df2f2d900ea42b7cefc
bugzilla: https://gitee.com/openeuler/kernel/issues/I56NE7

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=90b47e617fb277173dd62df2f2d900ea42b7cefc

--------------------------------

commit 737b0ef3 upstream.

n_gsm is based on the 3GPP 07.010 and its newer version is the 3GPP 27.010.
See https://portal.3gpp.org/desktopmodules/Specifications/SpecificationDetails.aspx?specificationId=1516
The changes from 07.010 to 27.010 are non-functional. Therefore, I refer to
the newer 27.010 here. Chapter 5.4.6.3.7 describes the encoding of the
control signal octet used by the MSC (modem status command). The same
encoding is also used in convergence layer type 2 as described in chapter
5.5.2. Table 7 and 24 both require the DV (data valid) bit to be set 1 for
outgoing control signal octets sent by the DTE (data terminal equipment),
i.e. for the initiator side.
Currently, the DV bit is only set if CD (carrier detect) is on, regardless
of the side.

This patch fixes this behavior by setting the DV bit on the initiator side
unconditionally.

Fixes: e1eaea46 ("tty: n_gsm line discipline")
Cc: stable@vger.kernel.org
Signed-off-by: NDaniel Starke <daniel.starke@siemens.com>
Link: https://lore.kernel.org/r/20220218073123.2121-1-daniel.starke@siemens.comSigned-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: NYu Liao <liaoyu15@huawei.com>
Reviewed-by: NWei Li <liwei391@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

stable inclusion
from stable-v5.10.103
commit 9e2dbc31e367d08ee299a0d8aeb498cb2e12a1c3
bugzilla: https://gitee.com/openeuler/kernel/issues/I56NE7

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=9e2dbc31e367d08ee299a0d8aeb498cb2e12a1c3

--------------------------------

commit 22e2100b upstream.

The trace_hardirqs_{on,off}() require the caller to setup frame pointer
properly. This because these two functions use macro 'CALLER_ADDR1' (aka.
__builtin_return_address(1)) to acquire caller info. If the $fp is used
for other purpose, the code generated this macro (as below) could trigger
memory access fault.

   0xffffffff8011510e <+80>:    ld      a1,-16(s0)
   0xffffffff80115112 <+84>:    ld      s2,-8(a1)  # <-- paging fault here

The oops message during booting if compiled with 'irqoff' tracer enabled:
[    0.039615][    T0] Unable to handle kernel NULL pointer dereference at virtual address 00000000000000f8
[    0.041925][    T0] Oops [#1]
[    0.042063][    T0] Modules linked in:
[    0.042864][    T0] CPU: 0 PID: 0 Comm: swapper/0 Not tainted 5.17.0-rc1-00233-g9a20c48d1ed2 #29
[    0.043568][    T0] Hardware name: riscv-virtio,qemu (DT)
[    0.044343][    T0] epc : trace_hardirqs_on+0x56/0xe2
[    0.044601][    T0]  ra : restore_all+0x12/0x6e
[    0.044721][    T0] epc : ffffffff80126a5c ra : ffffffff80003b94 sp : ffffffff81403db0
[    0.044801][    T0]  gp : ffffffff8163acd8 tp : ffffffff81414880 t0 : 0000000000000020
[    0.044882][    T0]  t1 : 0098968000000000 t2 : 0000000000000000 s0 : ffffffff81403de0
[    0.044967][    T0]  s1 : 0000000000000000 a0 : 0000000000000001 a1 : 0000000000000100
[    0.045046][    T0]  a2 : 0000000000000000 a3 : 0000000000000000 a4 : 0000000000000000
[    0.045124][    T0]  a5 : 0000000000000000 a6 : 0000000000000000 a7 : 0000000054494d45
[    0.045210][    T0]  s2 : ffffffff80003b94 s3 : ffffffff81a8f1b0 s4 : ffffffff80e27b50
[    0.045289][    T0]  s5 : ffffffff81414880 s6 : ffffffff8160fa00 s7 : 00000000800120e8
[    0.045389][    T0]  s8 : 0000000080013100 s9 : 000000000000007f s10: 0000000000000000
[    0.045474][    T0]  s11: 0000000000000000 t3 : 7fffffffffffffff t4 : 0000000000000000
[    0.045548][    T0]  t5 : 0000000000000000 t6 : ffffffff814aa368
[    0.045620][    T0] status: 0000000200000100 badaddr: 00000000000000f8 cause: 000000000000000d
[    0.046402][    T0] [<ffffffff80003b94>] restore_all+0x12/0x6e

This because the $fp(aka. $s0) register is not used as frame pointer in the
assembly entry code.

	resume_kernel:
		REG_L s0, TASK_TI_PREEMPT_COUNT(tp)
		bnez s0, restore_all
		REG_L s0, TASK_TI_FLAGS(tp)
                andi s0, s0, _TIF_NEED_RESCHED
                beqz s0, restore_all
                call preempt_schedule_irq
                j restore_all

To fix above issue, here we add one extra level wrapper for function
trace_hardirqs_{on,off}() so they can be safely called by low level entry
code.
Signed-off-by: NChangbin Du <changbin.du@gmail.com>
Fixes: 3c469798 ("riscv: Enable LOCKDEP_SUPPORT & fixup TRACE_IRQFLAGS_SUPPORT")
Cc: stable@vger.kernel.org
Signed-off-by: NPalmer Dabbelt <palmer@rivosinc.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: NYu Liao <liaoyu15@huawei.com>
Reviewed-by: NWei Li <liwei391@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

stable inclusion
from stable-v5.10.103
commit e098933866f9e1dd3ef4eebbe2e3d504f970f599
bugzilla: https://gitee.com/openeuler/kernel/issues/I56NE7

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=e098933866f9e1dd3ef4eebbe2e3d504f970f599

--------------------------------

commit 3abea10e upstream.

It is easy to hit the below memory leaks in my TigerLake platform:

unreferenced object 0xffff927c8b91dbc0 (size 32):
  comm "kworker/0:2", pid 112, jiffies 4294893323 (age 83.604s)
  hex dump (first 32 bytes):
    4e 41 4d 45 3d 49 4e 54 33 34 30 30 20 54 68 65  NAME=INT3400 The
    72 6d 61 6c 00 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b a5  rmal.kkkkkkkkkk.
  backtrace:
    [<ffffffff9c502c3e>] __kmalloc_track_caller+0x2fe/0x4a0
    [<ffffffff9c7b7c15>] kvasprintf+0x65/0xd0
    [<ffffffff9c7b7d6e>] kasprintf+0x4e/0x70
    [<ffffffffc04cb662>] int3400_notify+0x82/0x120 [int3400_thermal]
    [<ffffffff9c8b7358>] acpi_ev_notify_dispatch+0x54/0x71
    [<ffffffff9c88f1a7>] acpi_os_execute_deferred+0x17/0x30
    [<ffffffff9c2c2c0a>] process_one_work+0x21a/0x3f0
    [<ffffffff9c2c2e2a>] worker_thread+0x4a/0x3b0
    [<ffffffff9c2cb4dd>] kthread+0xfd/0x130
    [<ffffffff9c201c1f>] ret_from_fork+0x1f/0x30

Fix it by calling kfree() accordingly.

Fixes: 38e44da5 ("thermal: int3400_thermal: process "thermal table changed" event")
Signed-off-by: NChuansheng Liu <chuansheng.liu@intel.com>
Cc: 4.14+ <stable@vger.kernel.org> # 4.14+
Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: NYu Liao <liaoyu15@huawei.com>
Reviewed-by: NWei Li <liwei391@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

stable inclusion
from stable-v5.10.103
commit 5b1cef5798b4fd6e4fd5522e7b8a26248beeacaa
bugzilla: https://gitee.com/openeuler/kernel/issues/I56NE7

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=5b1cef5798b4fd6e4fd5522e7b8a26248beeacaa

--------------------------------

commit 22e9f710 upstream.

If the state is not idle then resolve_prepare_src() should immediately
fail and no change to global state should happen. However, it
unconditionally overwrites the src_addr trying to build a temporary any
address.

For instance if the state is already RDMA_CM_LISTEN then this will corrupt
the src_addr and would cause the test in cma_cancel_operation():

           if (cma_any_addr(cma_src_addr(id_priv)) && !id_priv->cma_dev)

Which would manifest as this trace from syzkaller:

  BUG: KASAN: use-after-free in __list_add_valid+0x93/0xa0 lib/list_debug.c:26
  Read of size 8 at addr ffff8881546491e0 by task syz-executor.1/32204

  CPU: 1 PID: 32204 Comm: syz-executor.1 Not tainted 5.12.0-rc8-syzkaller #0
  Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
  Call Trace:
   __dump_stack lib/dump_stack.c:79 [inline]
   dump_stack+0x141/0x1d7 lib/dump_stack.c:120
   print_address_description.constprop.0.cold+0x5b/0x2f8 mm/kasan/report.c:232
   __kasan_report mm/kasan/report.c:399 [inline]
   kasan_report.cold+0x7c/0xd8 mm/kasan/report.c:416
   __list_add_valid+0x93/0xa0 lib/list_debug.c:26
   __list_add include/linux/list.h:67 [inline]
   list_add_tail include/linux/list.h:100 [inline]
   cma_listen_on_all drivers/infiniband/core/cma.c:2557 [inline]
   rdma_listen+0x787/0xe00 drivers/infiniband/core/cma.c:3751
   ucma_listen+0x16a/0x210 drivers/infiniband/core/ucma.c:1102
   ucma_write+0x259/0x350 drivers/infiniband/core/ucma.c:1732
   vfs_write+0x28e/0xa30 fs/read_write.c:603
   ksys_write+0x1ee/0x250 fs/read_write.c:658
   do_syscall_64+0x2d/0x70 arch/x86/entry/common.c:46
   entry_SYSCALL_64_after_hwframe+0x44/0xae

This is indicating that an rdma_id_private was destroyed without doing
cma_cancel_listens().

Instead of trying to re-use the src_addr memory to indirectly create an
any address derived from the dst build one explicitly on the stack and
bind to that as any other normal flow would do. rdma_bind_addr() will copy
it over the src_addr once it knows the state is valid.

This is similar to commit bc0bdc5a ("RDMA/cma: Do not change
route.addr.src_addr.ss_family")

Link: https://lore.kernel.org/r/0-v2-e975c8fd9ef2+11e-syz_cma_srcaddr_jgg@nvidia.com
Cc: stable@vger.kernel.org
Fixes: 732d41c5 ("RDMA/cma: Make the locking for automatic state transition more clear")
Reported-by: syzbot+c94a3675a626f6333d74@syzkaller.appspotmail.com
Reviewed-by: NLeon Romanovsky <leonro@nvidia.com>
Signed-off-by: NJason Gunthorpe <jgg@nvidia.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: NYu Liao <liaoyu15@huawei.com>
Reviewed-by: NWei Li <liwei391@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

stable inclusion
from stable-v5.10.103
commit 8fe4da55246ac3cff5947485f466e5537c5bc294
bugzilla: https://gitee.com/openeuler/kernel/issues/I56NE7

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=8fe4da55246ac3cff5947485f466e5537c5bc294

--------------------------------

commit d8f7a548 upstream.

When unbinding/binding a driver with DMA mapped memory, the DMA map is
not freed before the driver is reloaded. This leads to a memory leak
when the DMA map is overwritten when reprobing the driver.

This can be reproduced with a platform driver having a dma-range:

dummy {
	...
	#address-cells = <0x2>;
	#size-cells = <0x2>;
	ranges;
	dma-ranges = <...>;
	...
};

and then unbinding/binding it:

~# echo soc:dummy >/sys/bus/platform/drivers/<driver>/unbind

DMA map object 0xffffff800b0ae540 still being held by &pdev->dev

~# echo soc:dummy >/sys/bus/platform/drivers/<driver>/bind
~# echo scan > /sys/kernel/debug/kmemleak
~# cat /sys/kernel/debug/kmemleak
unreferenced object 0xffffff800b0ae540 (size 64):
  comm "sh", pid 833, jiffies 4295174550 (age 2535.352s)
  hex dump (first 32 bytes):
    00 00 00 80 00 00 00 00 00 00 00 00 00 00 00 00  ................
    00 00 00 80 00 00 00 00 00 00 00 80 00 00 00 00  ................
  backtrace:
    [<ffffffefd1694708>] create_object.isra.0+0x108/0x344
    [<ffffffefd1d1a850>] kmemleak_alloc+0x8c/0xd0
    [<ffffffefd167e2d0>] __kmalloc+0x440/0x6f0
    [<ffffffefd1a960a4>] of_dma_get_range+0x124/0x220
    [<ffffffefd1a8ce90>] of_dma_configure_id+0x40/0x2d0
    [<ffffffefd198b68c>] platform_dma_configure+0x5c/0xa4
    [<ffffffefd198846c>] really_probe+0x8c/0x514
    [<ffffffefd1988990>] __driver_probe_device+0x9c/0x19c
    [<ffffffefd1988cd8>] device_driver_attach+0x54/0xbc
    [<ffffffefd1986634>] bind_store+0xc4/0x120
    [<ffffffefd19856e0>] drv_attr_store+0x30/0x44
    [<ffffffefd173c9b0>] sysfs_kf_write+0x50/0x60
    [<ffffffefd173c1c4>] kernfs_fop_write_iter+0x124/0x1b4
    [<ffffffefd16a013c>] new_sync_write+0xdc/0x160
    [<ffffffefd16a256c>] vfs_write+0x23c/0x2a0
    [<ffffffefd16a2758>] ksys_write+0x64/0xec

To prevent this we should free the dma_range_map when the device is
released.

Fixes: e0d07278 ("dma-mapping: introduce DMA range map, supplanting dma_pfn_offset")
Cc: stable <stable@vger.kernel.org>
Suggested-by: NRob Herring <robh@kernel.org>
Reviewed-by: NRob Herring <robh@kernel.org>
Signed-off-by: NMårten Lindahl <marten.lindahl@axis.com>
Link: https://lore.kernel.org/r/20220216094128.4025861-1-marten.lindahl@axis.comSigned-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: NYu Liao <liaoyu15@huawei.com>
Reviewed-by: NWei Li <liwei391@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

stable inclusion
from stable-v5.10.103
commit 214824764308ae9b3dc0a99e369ef9a68af05923
bugzilla: https://gitee.com/openeuler/kernel/issues/I56NE7

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=214824764308ae9b3dc0a99e369ef9a68af05923

--------------------------------

commit 243a1dd7 upstream.

The -ENODEV return value from xhci_check_args() is incorrectly changed
to -EINVAL in a couple places before propagated further.

xhci_check_args() returns 4 types of value, -ENODEV, -EINVAL, 1 and 0.
xhci_urb_enqueue and xhci_check_streams_endpoint return -EINVAL if
the return value of xhci_check_args <= 0.
This causes problems for example r8152_submit_rx, calling usb_submit_urb
in drivers/net/usb/r8152.c.
r8152_submit_rx will never get -ENODEV after submiting an urb when xHC
is halted because xhci_urb_enqueue returns -EINVAL in the very beginning.

[commit message and header edit -Mathias]

Fixes: 203a8661 ("xhci: Avoid NULL pointer deref when host dies.")
Cc: stable@vger.kernel.org
Signed-off-by: NHongyu Xie <xiehongyu1@kylinos.cn>
Signed-off-by: NMathias Nyman <mathias.nyman@linux.intel.com>
Link: https://lore.kernel.org/r/20220215123320.1253947-3-mathias.nyman@linux.intel.comSigned-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: NYu Liao <liaoyu15@huawei.com>
Reviewed-by: NWei Li <liwei391@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

stable inclusion
from stable-v5.10.103
commit 0b0a229da1f22f04b356b8ede564d95e046137b4
bugzilla: https://gitee.com/openeuler/kernel/issues/I56NE7

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=0b0a229da1f22f04b356b8ede564d95e046137b4

--------------------------------

commit 8b328f80 upstream.

When HCE(Host Controller Error) is set, it means an internal
error condition has been detected. Software needs to re-initialize
the HC, so add this check in xhci resume.

Cc: stable@vger.kernel.org
Signed-off-by: NPuma Hsu <pumahsu@google.com>
Signed-off-by: NMathias Nyman <mathias.nyman@linux.intel.com>
Link: https://lore.kernel.org/r/20220215123320.1253947-2-mathias.nyman@linux.intel.comSigned-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: NYu Liao <liaoyu15@huawei.com>
Reviewed-by: NWei Li <liwei391@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

stable inclusion
from stable-v5.10.103
commit 328faee6d4099de2e8d9dc18ded9ea31f62b5b5f
bugzilla: https://gitee.com/openeuler/kernel/issues/I56NE7

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=328faee6d4099de2e8d9dc18ded9ea31f62b5b5f

--------------------------------

commit 84918a89 upstream.

The interrupt service routine registered for the gadget is a primary
handler which mask the interrupt source and a threaded handler which
handles the source of the interrupt. Since the threaded handler is
voluntary threaded, the IRQ-core does not disable bottom halves before
invoke the handler like it does for the forced-threaded handler.

Due to changes in networking it became visible that a network gadget's
completions handler may schedule a softirq which remains unprocessed.
The gadget's completion handler is usually invoked either in hard-IRQ or
soft-IRQ context. In this context it is enough to just raise the softirq
because the softirq itself will be handled once that context is left.
In the case of the voluntary threaded handler, there is nothing that
will process pending softirqs. Which means it remain queued until
another random interrupt (on this CPU) fires and handles it on its exit
path or another thread locks and unlocks a lock with the bh suffix.
Worst case is that the CPU goes idle and the NOHZ complains about
unhandled softirqs.

Disable bottom halves before acquiring the lock (and disabling
interrupts) and enable them after dropping the lock. This ensures that
any pending softirqs will handled right away.

Link: https://lkml.kernel.org/r/c2a64979-73d1-2c22-e048-c275c9f81558@samsung.com
Fixes: e5f68b4a ("Revert "usb: dwc3: gadget: remove unnecessary _irqsave()"")
Cc: stable <stable@kernel.org>
Reported-by: NMarek Szyprowski <m.szyprowski@samsung.com>
Tested-by: NMarek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: NSebastian Andrzej Siewior <bigeasy@linutronix.de>
Link: https://lore.kernel.org/r/Yg/YPejVQH3KkRVd@linutronix.deSigned-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: NYu Liao <liaoyu15@huawei.com>
Reviewed-by: NWei Li <liwei391@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

stable inclusion
from stable-v5.10.103
commit e57bdee8661e7233f18e9a37a5c926da19db5e7b
bugzilla: https://gitee.com/openeuler/kernel/issues/I56NE7

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=e57bdee8661e7233f18e9a37a5c926da19db5e7b

--------------------------------

commit 62e3f0af upstream.

When the Bay Trail phy GPIO mappings where added cs and reset were swapped,
this did not cause any issues sofar, because sofar they were always driven
high/low at the same time.

Note the new mapping has been verified both in /sys/kernel/debug/gpio
output on Android factory images on multiple devices, as well as in
the schematics for some devices.

Fixes: 5741022c ("usb: dwc3: pci: Add GPIO lookup table on platforms without ACPI GPIO resources")
Cc: stable <stable@vger.kernel.org>
Signed-off-by: NHans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20220213130524.18748-3-hdegoede@redhat.comSigned-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: NYu Liao <liaoyu15@huawei.com>
Reviewed-by: NWei Li <liwei391@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

stable inclusion
from stable-v5.10.103
commit 99b2425d9178b0939ac000893c5d889d63f5234d
bugzilla: https://gitee.com/openeuler/kernel/issues/I56NE7

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=99b2425d9178b0939ac000893c5d889d63f5234d

--------------------------------

commit 32fde843 upstream.

When the gadget driver hasn't been (yet) configured, and the cable is
connected to a HOST, the SFTDISCON gets cleared unconditionally, so the
HOST tries to enumerate it.
At the host side, this can result in a stuck USB port or worse. When
getting lucky, some dmesg can be observed at the host side:
 new high-speed USB device number ...
 device descriptor read/64, error -110

Fix it in drd, by checking the enabled flag before calling
dwc2_hsotg_core_connect(). It will be called later, once configured,
by the normal flow:
- udc_bind_to_driver
 - usb_gadget_connect
   - dwc2_hsotg_pullup
     - dwc2_hsotg_core_connect

Fixes: 17f93402 ("usb: dwc2: override PHY input signals with usb role switch support")
Cc: stable <stable@vger.kernel.org>
Signed-off-by: NFabrice Gasnier <fabrice.gasnier@foss.st.com>
Link: https://lore.kernel.org/r/1644999135-13478-1-git-send-email-fabrice.gasnier@foss.st.comSigned-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: NYu Liao <liaoyu15@huawei.com>
Reviewed-by: NWei Li <liwei391@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

stable inclusion
from stable-v5.10.103
commit c7866880377b73a809e6f08852b0b05452ab6296
bugzilla: https://gitee.com/openeuler/kernel/issues/I56NE7

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=c7866880377b73a809e6f08852b0b05452ab6296

--------------------------------

commit cfc4442c upstream.

Add support for the following Telit LE910R1 compositions:

0x701a: rndis, tty, tty, tty
0x701b: ecm, tty, tty, tty
0x9201: tty
Signed-off-by: NDaniele Palmas <dnlplm@gmail.com>
Link: https://lore.kernel.org/r/20220218134552.4051-1-dnlplm@gmail.com
Cc: stable@vger.kernel.org
Signed-off-by: NJohan Hovold <johan@kernel.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: NYu Liao <liaoyu15@huawei.com>
Reviewed-by: NWei Li <liwei391@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

stable inclusion
from stable-v5.10.103
commit 220ba174f192dee88cff9ba24b2de912225d4d5d
bugzilla: https://gitee.com/openeuler/kernel/issues/I56NE7

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=220ba174f192dee88cff9ba24b2de912225d4d5d

--------------------------------

commit 6ecb3f0b upstream.

Dell DW5829e same as DW5821e except CAT level.
DW5821e supports CAT16 but DW5829e supports CAT9.
There are 2 types product of DW5829e: normal and eSIM.
So we will add 2 PID for DW5829e.
And for each PID, it support MBIM or RMNET.
Let's see test evidence as below:

DW5829e MBIM mode:
T:  Bus=04 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#=  4 Spd=5000 MxCh= 0
D:  Ver= 3.10 Cls=ef(misc ) Sub=02 Prot=01 MxPS= 9 #Cfgs=  2
P:  Vendor=413c ProdID=81e6 Rev=03.18
S:  Manufacturer=Dell Inc.
S:  Product=DW5829e Snapdragon X20 LTE
S:  SerialNumber=0123456789ABCDEF
C:  #Ifs= 7 Cfg#= 2 Atr=a0 MxPwr=896mA
I:  If#=0x0 Alt= 0 #EPs= 1 Cls=02(commc) Sub=0e Prot=00 Driver=cdc_mbim
I:  If#=0x1 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=02 Driver=cdc_mbim
I:  If#=0x2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
I:  If#=0x3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
I:  If#=0x4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
I:  If#=0x5 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option
I:  If#=0x6 Alt= 0 #EPs= 1 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none)

DW5829e RMNET mode:
T:  Bus=04 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#=  5 Spd=5000 MxCh= 0
D:  Ver= 3.10 Cls=ef(misc ) Sub=02 Prot=01 MxPS= 9 #Cfgs=  1
P:  Vendor=413c ProdID=81e6 Rev=03.18
S:  Manufacturer=Dell Inc.
S:  Product=DW5829e Snapdragon X20 LTE
S:  SerialNumber=0123456789ABCDEF
C:  #Ifs= 6 Cfg#= 1 Atr=a0 MxPwr=896mA
I:  If#=0x0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=qmi_wwan
I:  If#=0x1 Alt= 0 #EPs= 1 Cls=03(HID  ) Sub=00 Prot=00 Driver=usbhid
I:  If#=0x2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
I:  If#=0x3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
I:  If#=0x4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
I:  If#=0x5 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option

DW5829e-eSIM MBIM mode:
T:  Bus=04 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#=  6 Spd=5000 MxCh= 0
D:  Ver= 3.10 Cls=ef(misc ) Sub=02 Prot=01 MxPS= 9 #Cfgs=  2
P:  Vendor=413c ProdID=81e4 Rev=03.18
S:  Manufacturer=Dell Inc.
S:  Product=DW5829e-eSIM Snapdragon X20 LTE
S:  SerialNumber=0123456789ABCDEF
C:  #Ifs= 7 Cfg#= 2 Atr=a0 MxPwr=896mA
I:  If#=0x0 Alt= 0 #EPs= 1 Cls=02(commc) Sub=0e Prot=00 Driver=cdc_mbim
I:  If#=0x1 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=02 Driver=cdc_mbim
I:  If#=0x2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
I:  If#=0x3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
I:  If#=0x4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
I:  If#=0x5 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option
I:  If#=0x6 Alt= 0 #EPs= 1 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none)

DW5829e-eSIM RMNET mode:
T:  Bus=04 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#=  7 Spd=5000 MxCh= 0
D:  Ver= 3.10 Cls=ef(misc ) Sub=02 Prot=01 MxPS= 9 #Cfgs=  1
P:  Vendor=413c ProdID=81e4 Rev=03.18
S:  Manufacturer=Dell Inc.
S:  Product=DW5829e-eSIM Snapdragon X20 LTE
S:  SerialNumber=0123456789ABCDEF
C:  #Ifs= 6 Cfg#= 1 Atr=a0 MxPwr=896mA
I:  If#=0x0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=qmi_wwan
I:  If#=0x1 Alt= 0 #EPs= 1 Cls=03(HID  ) Sub=00 Prot=00 Driver=usbhid
I:  If#=0x2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
I:  If#=0x3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
I:  If#=0x4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
I:  If#=0x5 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option

BTW, the interface 0x6 of MBIM mode is GNSS port, which not same as NMEA
port. So it's banned from serial option driver.
The remaining interfaces 0x2-0x5 are: MODEM, MODEM, NMEA, DIAG.
Signed-off-by: NSlark Xiao <slark_xiao@163.com>
Link: https://lore.kernel.org/r/20220214021401.6264-1-slark_xiao@163.com
[ johan: drop unnecessary reservation of interface 1 ]
Cc: stable@vger.kernel.org
Signed-off-by: NJohan Hovold <johan@kernel.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: NYu Liao <liaoyu15@huawei.com>
Reviewed-by: NWei Li <liwei391@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

stable inclusion
from stable-v5.10.103
commit 3a1dd56e566fa71419da2c145a6850e63f17fbf0
bugzilla: https://gitee.com/openeuler/kernel/issues/I56NE7

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=3a1dd56e566fa71419da2c145a6850e63f17fbf0

--------------------------------

commit 851e99eb upstream.

Al Viro brought it to my attention that the dentries may not be filled
when the parse_options() is called, causing the call to set_gid() to
possibly crash. It should only be called if parse_options() succeeds
totally anyway.

He suggested the logical place to do the update is in apply_options().

Link: https://lore.kernel.org/all/20220225165219.737025658@goodmis.org/
Link: https://lkml.kernel.org/r/20220225153426.1c4cab6b@gandalf.local.home

Cc: stable@vger.kernel.org
Acked-by: NAl Viro <viro@zeniv.linux.org.uk>
Reported-by: NAl Viro <viro@zeniv.linux.org.uk>
Fixes: 48b27b6b ("tracefs: Set all files to the same group ownership as the mount option")
Signed-off-by: NSteven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: NYu Liao <liaoyu15@huawei.com>
Reviewed-by: NWei Li <liwei391@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

stable inclusion
from stable-v5.10.103
commit 4ce247af3f30078d5b97554f1ae6200a0222c15a
bugzilla: https://gitee.com/openeuler/kernel/issues/I56NE7

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=4ce247af3f30078d5b97554f1ae6200a0222c15a

--------------------------------

commit aaaba1c8 upstream.

There's no lock for rndis response list. It could cause list corruption
if there're two different list_add at the same time like below.
It's better to add in rndis_add_response / rndis_free_response
/ rndis_get_next_response to prevent any race condition on response list.

[  361.894299] [1:   irq/191-dwc3:16979] list_add corruption.
next->prev should be prev (ffffff80651764d0),
but was ffffff883dc36f80. (next=ffffff80651764d0).

[  361.904380] [1:   irq/191-dwc3:16979] Call trace:
[  361.904391] [1:   irq/191-dwc3:16979]  __list_add_valid+0x74/0x90
[  361.904401] [1:   irq/191-dwc3:16979]  rndis_msg_parser+0x168/0x8c0
[  361.904409] [1:   irq/191-dwc3:16979]  rndis_command_complete+0x24/0x84
[  361.904417] [1:   irq/191-dwc3:16979]  usb_gadget_giveback_request+0x20/0xe4
[  361.904426] [1:   irq/191-dwc3:16979]  dwc3_gadget_giveback+0x44/0x60
[  361.904434] [1:   irq/191-dwc3:16979]  dwc3_ep0_complete_data+0x1e8/0x3a0
[  361.904442] [1:   irq/191-dwc3:16979]  dwc3_ep0_interrupt+0x29c/0x3dc
[  361.904450] [1:   irq/191-dwc3:16979]  dwc3_process_event_entry+0x78/0x6cc
[  361.904457] [1:   irq/191-dwc3:16979]  dwc3_process_event_buf+0xa0/0x1ec
[  361.904465] [1:   irq/191-dwc3:16979]  dwc3_thread_interrupt+0x34/0x5c

Fixes: f6281af9 ("usb: gadget: rndis: use list_for_each_entry_safe")
Cc: stable <stable@kernel.org>
Signed-off-by: NDaehwan Jung <dh10.jung@samsung.com>
Link: https://lore.kernel.org/r/1645507768-77687-1-git-send-email-dh10.jung@samsung.comSigned-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: NYu Liao <liaoyu15@huawei.com>
Reviewed-by: NWei Li <liwei391@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

stable inclusion
from stable-v5.10.103
commit ddc254fc8873b3517aeaa6859f78d7fb949866f4
bugzilla: https://gitee.com/openeuler/kernel/issues/I56NE7

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=ddc254fc8873b3517aeaa6859f78d7fb949866f4

--------------------------------

commit 198a7ebd upstream.

This reverts commit 46ee4abb.

CH341 has Product ID 0x5512 in EPP/MEM mode which is used for
I2C/SPI/GPIO interfaces. In asynchronous serial interface mode
CH341 has PID 0x5523 which is already in the table.

Mode is selected by corresponding jumper setting.
Signed-off-by: NDmytro Bagrii <dimich.dmb@gmail.com>
Link: https://lore.kernel.org/r/20220210164137.4376-1-dimich.dmb@gmail.com
Link: https://lore.kernel.org/r/YJ0OCS/sh+1ifD/q@hovoldconsulting.com
Cc: stable@vger.kernel.org
Signed-off-by: NJohan Hovold <johan@kernel.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: NYu Liao <liaoyu15@huawei.com>
Reviewed-by: NWei Li <liwei391@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

stable inclusion
from stable-v5.10.103
commit d3fce1b6bd95d6c90b92df41d72e3db6be63fbd5
bugzilla: https://gitee.com/openeuler/kernel/issues/I56NE7

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=d3fce1b6bd95d6c90b92df41d72e3db6be63fbd5

--------------------------------

commit 8d093e02 upstream.

The HPT371 chip physically has only one channel, the secondary one,
however the primary channel registers do exist! Thus we have to
manually disable the non-existing channel if the BIOS hasn't done this
already. Similarly to the pata_hpt3x2n driver, always disable the
primary channel.

Fixes: 669a5db4 ("[libata] Add a bunch of PATA drivers.")
Cc: stable@vger.kernel.org
Signed-off-by: NSergey Shtylyov <s.shtylyov@omp.ru>
Signed-off-by: NDamien Le Moal <damien.lemoal@opensource.wdc.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: NYu Liao <liaoyu15@huawei.com>
Reviewed-by: NWei Li <liwei391@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

stable inclusion
from stable-v5.10.103
commit 18701d8afaa1c609b3cbf7c63ef5423ab2c8d252
bugzilla: https://gitee.com/openeuler/kernel/issues/I56NE7

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=18701d8afaa1c609b3cbf7c63ef5423ab2c8d252

--------------------------------

commit eebb0f4e upstream.

UART drivers are meant to use the port spinlock within certain
methods, to protect against reentrancy. The sc16is7xx driver does
very little locking, presumably because when added it triggers
"scheduling while atomic" errors. This is due to the use of mutexes
within the regmap abstraction layer, and the mutex implementation's
habit of sleeping the current thread while waiting for access.
Unfortunately this lack of interlocking can lead to corruption of
outbound data, which occurs when the buffer used for I2C transmission
is used simultaneously by two threads - a work queue thread running
sc16is7xx_tx_proc, and an IRQ thread in sc16is7xx_port_irq, both
of which can call sc16is7xx_handle_tx.

An earlier patch added efr_lock, a mutex that controls access to the
EFR register. This mutex is already claimed in the IRQ handler, and
all that is required is to claim the same mutex in sc16is7xx_tx_proc.

See: https://github.com/raspberrypi/linux/issues/4885

Fixes: 6393ff1c ("sc16is7xx: Use threaded IRQ")
Cc: stable <stable@vger.kernel.org>
Signed-off-by: NPhil Elwell <phil@raspberrypi.com>
Link: https://lore.kernel.org/r/20220216160802.1026013-1-phil@raspberrypi.comSigned-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: NYu Liao <liaoyu15@huawei.com>
Reviewed-by: NWei Li <liwei391@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

stable inclusion
from stable-v5.10.103
commit d5ddd7343adf7bfbe8b702eddb112446f2b0ad8c
bugzilla: https://gitee.com/openeuler/kernel/issues/I56NE7

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=d5ddd7343adf7bfbe8b702eddb112446f2b0ad8c

--------------------------------

commit 632fe0bb upstream.

The pm_runtime_enable will increase power disable depth.
If the probe fails, we should use pm_runtime_disable() to balance
pm_runtime_enable(). In the PM Runtime docs:
    Drivers in ->remove() callback should undo the runtime PM changes done
    in ->probe(). Usually this means calling pm_runtime_disable(),
    pm_runtime_dont_use_autosuspend() etc.
We should do this in error handling.

Fix this problem for the following drivers: bmc150, bmg160, kmx61,
kxcj-1013, mma9551, mma9553.

Fixes: 7d0ead5c ("iio: Reconcile operation order between iio_register/unregister and pm functions")
Signed-off-by: NMiaoqian Lin <linmq006@gmail.com>
Reviewed-by: NAndy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20220106112309.16879-1-linmq006@gmail.com
Cc: <Stable@vger.kernel.org>
Signed-off-by: NJonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: NYu Liao <liaoyu15@huawei.com>
Reviewed-by: NWei Li <liwei391@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

stable inclusion
from stable-v5.10.103
commit eabcc609cb8accf16a5c53fd9b91a827854b1ca9
bugzilla: https://gitee.com/openeuler/kernel/issues/I56NE7

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=eabcc609cb8accf16a5c53fd9b91a827854b1ca9

--------------------------------

commit ea85bf90 upstream.

We need to wait for sensor settling time (~ 3/ODR) before reading data
in st_lsm6dsx_read_oneshot routine in order to avoid corrupted samples.

Fixes: 290a6ce1 ("iio: imu: add support to lsm6dsx driver")
Reported-by: NMario Tesi <mario.tesi@st.com>
Tested-by: NMario Tesi <mario.tesi@st.com>
Signed-off-by: NLorenzo Bianconi <lorenzo@kernel.org>
Link: https://lore.kernel.org/r/b41ebda5535895298716c76d939f9f165fcd2d13.1644098120.git.lorenzo@kernel.org
Cc: <Stable@vger.kernel.org>
Signed-off-by: NJonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: NYu Liao <liaoyu15@huawei.com>
Reviewed-by: NWei Li <liwei391@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

stable inclusion
from stable-v5.10.103
commit b8d411a96227cf182061c4761d77c96615b515c7
bugzilla: https://gitee.com/openeuler/kernel/issues/I56NE7

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=b8d411a96227cf182061c4761d77c96615b515c7

--------------------------------

commit 0e33d15f upstream.

According to page 90 of the datasheet [1], AIN_BUFP is bit 6 and
AIN_BUFM is bit 5 of the CONFIG_0 -> CONFIG_7 registers.

Fix the mask used for setting these bits.

[1]: https://www.analog.com/media/en/technical-documentation/data-sheets/ad7124-8.pdf

Fixes: 0eaecea6 ("iio: adc: ad7124: Add buffered input support")
Signed-off-by: NCosmin Tanislav <cosmin.tanislav@analog.com>
Link: https://lore.kernel.org/r/20220112200036.694490-1-cosmin.tanislav@analog.com
Cc: <Stable@vger.kernel.org>
Signed-off-by: NJonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: NYu Liao <liaoyu15@huawei.com>
Reviewed-by: NWei Li <liwei391@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

stable inclusion
from stable-v5.10.103
commit 1aa12ecfdcbafebc218910ec47acf6262e600cf5
bugzilla: https://gitee.com/openeuler/kernel/issues/I56NE7

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=1aa12ecfdcbafebc218910ec47acf6262e600cf5

--------------------------------

commit e0a2e37f upstream.

If iio_device_register() fails, a previous ioremap() is left unbalanced.

Update the error handling path and add the missing iounmap() call, as
already done in the remove function.

Fixes: 74aeac4d ("iio: adc: Add MEN 16z188 ADC driver")
Signed-off-by: NChristophe JAILLET <christophe.jaillet@wanadoo.fr>
Link: https://lore.kernel.org/r/320fc777863880247c2aff4a9d1a54ba69abf080.1643445149.git.christophe.jaillet@wanadoo.fr
Cc: <Stable@vger.kernel.org>
Signed-off-by: NJonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: NYu Liao <liaoyu15@huawei.com>
Reviewed-by: NWei Li <liwei391@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

stable inclusion
from stable-v5.10.103
commit afbeee13beb5f0e7b88b7ca80278dec6f5eea584
bugzilla: https://gitee.com/openeuler/kernel/issues/I56NE7

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=afbeee13beb5f0e7b88b7ca80278dec6f5eea584

--------------------------------

commit 302e9edd upstream.

If a trigger is set on an event to disable or enable tracing within an
instance, then tracing should be disabled or enabled in the instance and
not at the top level, which is confusing to users.

Link: https://lkml.kernel.org/r/20220223223837.14f94ec3@rorschach.local.home

Cc: stable@vger.kernel.org
Fixes: ae63b31e ("tracing: Separate out trace events from global variables")
Tested-by: NDaniel Bristot de Oliveira <bristot@kernel.org>
Reviewed-by: NTom Zanussi <zanussi@kernel.org>
Signed-off-by: NSteven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: NYu Liao <liaoyu15@huawei.com>
Reviewed-by: NWei Li <liwei391@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>