Like capture of GuC interrupts while enabling GuC submission, release
them while disabling GuC submission.

Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Oscar Mateo <oscar.mateo@intel.com>
Reviewed-by: NChris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: NSagar Arun Kamble <sagar.a.kamble@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1489199821-6707-1-git-send-email-sagar.a.kamble@intel.comSigned-off-by: NChris Wilson <chris@chris-wilson.co.uk>

In order to ensure no missed interrupts we must first re-direct
the interrupts to GuC, and only then re-submit the requests to
be replayed after a GPU reset. Otherwise context switch can fire
before GuC has been set up to receive it triggering more hangs.

v2: Rebase.
Signed-off-by: NTvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Cc: Oscar Mateo <oscar.mateo@intel.com>
Cc: Sagar Arun Kamble <sagar.a.kamble@intel.com>
Cc: Arkadiusz Hiler <arkadiusz.hiler@intel.com>
Reviewed-by: NChris Wilson <chris@chris-wilson.co.uk>
Link: http://patchwork.freedesktop.org/patch/msgid/20170309132005.1317-1-tvrtko.ursulin@linux.intel.com

__i915_guc_submit may be, despite my assertion, called from outside of
an irq-safe spinlock so we need to use a full spin_lock_irqsave and not
cheat using a spin_lock. (The initial notify callback from the completed
fence is called before the spinlock is taken to wake up all waiters and
call their callbacks.)

[   48.166581] kernel BUG at drivers/gpu/drm/i915/i915_guc_submission.c:527!
[   48.166617] invalid opcode: 0000 [#1] PREEMPT SMP
[   48.166644] Modules linked in: i915 prime_numbers x86_pkg_temp_thermal intel_powerclamp coretemp crct10dif_pclmul crc32_pclmul ghash_clmulni_intel mei_me mei i2c_i801 netconsole i2c_hid [last unloaded: i915]
[   48.166733] CPU: 2 PID: 5 Comm: kworker/u8:0 Tainted: G     U          4.10.0nightly-170302-guc_scrub+ #19
[   48.166778] Hardware name:                  /NUC6i5SYB, BIOS SYSKLi35.86A.0054.2016.0930.1102 09/30/2016
[   48.166835] Workqueue: i915 __intel_autoenable_gt_powersave [i915]
[   48.166865] task: ffff88084ab7cf40 task.stack: ffffc90000064000
[   48.166921] RIP: 0010:__i915_guc_submit+0x1e6/0x2a0 [i915]
[   48.166953] RSP: 0018:ffffc90000067c80 EFLAGS: 00010202
[   48.166979] RAX: 0000000000000202 RBX: ffff8808465e0c68 RCX: 0000000000000201
[   48.167016] RDX: 0000000080000201 RSI: ffff88084ab7d798 RDI: ffff88082b8a8040
[   48.167054] RBP: ffffc90000067cd8 R08: 0000000000000001 R09: 0000000000000000
[   48.167085] R10: 0000000000000000 R11: 0000000000000000 R12: ffff88082b8a8148
[   48.167126] R13: 0000000000000000 R14: ffff88082f440000 R15: ffff88082e85e660
[   48.167156] FS:  0000000000000000(0000) GS:ffff88086ed00000(0000) knlGS:0000000000000000
[   48.167195] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[   48.167226] CR2: 000055862ffcdc2c CR3: 0000000001e0f000 CR4: 00000000003406e0
[   48.167257] Call Trace:
[   48.168112]  ? trace_hardirqs_on+0xd/0x10
[   48.168966]  ? _raw_spin_unlock_irqrestore+0x4a/0x80
[   48.169831]  i915_guc_submit+0x1a/0x20 [i915]
[   48.170680]  submit_notify+0x89/0xc0 [i915]
[   48.171512]  __i915_sw_fence_complete+0x175/0x220 [i915]
[   48.172340]  i915_sw_fence_complete+0x2a/0x50 [i915]
[   48.173158]  i915_sw_fence_commit+0x21/0x30 [i915]
[   48.173968]  __i915_add_request+0x238/0x530 [i915]
[   48.174764]  __intel_autoenable_gt_powersave+0x8b/0xb0 [i915]
[   48.175549]  process_one_work+0x218/0x690
[   48.176318]  ? process_one_work+0x197/0x690
[   48.177183]  worker_thread+0x4e/0x4a0
[   48.178039]  kthread+0x10c/0x140
[   48.178878]  ? process_one_work+0x690/0x690
[   48.179718]  ? kthread_create_on_node+0x40/0x40
[   48.180568]  ret_from_fork+0x31/0x40
[   48.181423] Code: 02 00 00 43 89 84 ae 50 11 00 00 e8 75 01 62 e1 48 83 c4 30 5b 41 5c 41 5d 41 5e 41 5f 5d c3 48 c1 e0 20 48 09 c2 49 89 d0 eb 82 <0f> 0b 0f 0b 0f 0b 0f 0b 0f 0b 0f 0b 49 c1 e8 20 44 89 43 34 4a
[   48.183336] RIP: __i915_guc_submit+0x1e6/0x2a0 [i915] RSP: ffffc90000067c80
Reported-by: NArkadiusz Hiler <arkadiusz.hiler@intel.com>
Fixes: 349ab919 ("drm/i915/guc: Make wq_lock irq-safe")
Fixes: 67b807a8 ("drm/i915: Delay disabling the user interrupt for breadcrumbs")
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Arkadiusz Hiler <arkadiusz.hiler@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170302145323.12886-1-chris@chris-wilson.co.ukReviewed-by: NTvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: NArkadiusz Hiler <arkadiusz.hiler@intel.com>
Tested-by: NArkadiusz Hiler <arkadiusz.hiler@intel.com>

A couple of operations, the flushes and the tracepoint, do not require
serialisation by client->wq_lock, so move them before we take it.
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170228112803.11646-3-chris@chris-wilson.co.ukReviewed-by: NTvrtko Ursulin <tvrtko.ursulin@intel.com>

Following the use of dma_fence_signal() from within our interrupt
handler, we need to make guc->wq_lock also irq-safe. This was done
previously as part of the guc scheduler patch (which also started
mixing our fences with the interrupt handler), but is now required to
fix the current guc submission backend.

v4: Document that __i915_guc_submit is always under an irq disabled
section
v5: Move wq_rsvd adjustment to its own function

Fixes: 67b807a8 ("drm/i915: Delay disabling the user interrupt for breadcrumbs")
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Reviewed-by: NMichal Wajdeczko <michal.wajdeczko@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170228112803.11646-2-chris@chris-wilson.co.ukReviewed-by: NTvrtko Ursulin <tvrtko.ursulin@intel.com>

Two new tracepoints placed at the call sites where requests are
actually passed to the GPU enable userspace to track engine
utilisation.

These tracepoints are only enabled when the
DRM_I915_LOW_LEVEL_TRACEPOINTS Kconfig option is enabled.

v2: Fix compilation with !CONFIG_DRM_I915_LOW_LEVEL_TRACEPOINTS.

v3: Name global seqno consistently across tracepoints.

v4: Remove port info from request out tracepoint. (Chris Wilson)
Signed-off-by: NTvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: NChris Wilson <chris@chris-wilson.co.uk>

With the introduce of i915_vma_instance() for obtaining the VMA
singleton for a (obj, vm, view) tuple, we can remove the
i915_vma_create() in favour of a single entry point. We do incur a
lookup onto an empty tree, but the i915_vma_create() were being called
infrequently and during initialisation, so the small overhead is
negligible.

v2: Drop the i915_ prefix from the now static vma_create() function
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: NJoonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170116152131.18089-4-chris@chris-wilson.co.uk

Rename some of the GuC fw loading code to make them more general. We
will utilise them for HuC loading as well.
     s/intel_guc_fw/intel_uc_fw/g
     s/GUC_FIRMWARE/INTEL_UC_FIRMWARE/g

Struct intel_guc_fw is renamed to intel_uc_fw. Prefix of tts members,
such as 'guc' or 'guc_fw' either is renamed to 'uc' or removed for
same purpose.

v2: rebased on top of nightly.
    reapplied the search/replace as upstream code as changed.
v3: removed G from messages in shared fw fetch function.
v4: rebased.Updated dev to dev_priv in intel_guc_setup(), guc_fw_getch()
and intel_guc_init().
v5: rebased. Remove uint32_t fw_type to patch 2. Add INTEL_ prefix for
fields in enum intel_uc_fw_status. Remove uc_dev field since its never
used.Rename uc_fw to just fw and guc_fw to fw to avoid redundency.
v6: rebased. Remove sections of code that were commented and no longer
required.
v7: rebased. Remove uc_fw_ prefix from path and obj fields
in intel_uc_fw struct as suggested by Michal.
v8: rebased. Add declaration of intel_guc_wopcm_size() in
this patch instead of patch 3.

Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Arkadiusz Hiler <arkadiusz.hiler@intel.com>
Signed-off-by: NAnusha Srivatsa <anusha.srivatsa@intel.com>
Signed-off-by: NAlex Dai <yu.dai@intel.com>
Signed-off-by: NPeter Antoine <peter.antoine@intel.com>
Reviewed-by: NArkadiusz Hiler <arkadiusz.hiler@intel.com>
Reviewed-by: NMichal Wajdeczko <michal.wajdeczko@intel.com>
Signed-off-by: NJani Nikula <jani.nikula@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1484356631-16139-2-git-send-email-anusha.srivatsa@intel.com

Functions supporting GuC logging capabilities were spread across
many files, with unnecessary exposures and mixed with unrelated
code. Dedicate file will make maintenance of all GuC functions
easier as more functions are coming to support GuC submissions.
Signed-off-by: NMichal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: NArkadiusz Hiler <arkadiusz.hiler@intel.com>
Signed-off-by: NTvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170113174157.104492-1-michal.wajdeczko@intel.com

Move the GuC invalidation of its ggtt TLB to where we perform the ggtt
modification rather than proliferate it into all the callers of the
insert (which may or may not in fact have to do the insertion).

v2: Just do the guc invalidate unconditionally, (afaict) it has no impact
without the guc loaded on gen8+
v3: Conditionally invalidate the guc - just in case that register has
not been validated for other modes.
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: NTvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170112110050.25333-1-chris@chris-wilson.co.uk

In order to silence sparse:

../drivers/gpu/drm/i915/i915_gpu_error.c:200:39: warning: Using plain integer as NULL pointer

add a helper to check whether we have sse4.1 and that the desired
alignment is valid for acceleration.

v2: Explain the macros and split the two use cases between
i915_has_memcpy_from_wc() and i915_can_memcpy_from_wc().
Reported-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: NTvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170106152013.24684-1-chris@chris-wilson.co.uk

Add an assertion to the plain i915_ggtt_offset() to double check that
any offset we hand to the GuC is outside of its unmappable ranges.
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20161224193146.4402-1-chris@chris-wilson.co.ukReviewed-by: NDaniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>

The requests conversion introduced a nasty bug where we could generate a
new request in the middle of constructing a request if we needed to idle
the system in order to evict space for a context. The request to idle
would be executed (and waited upon) before the current one, creating a
minor havoc in the seqno accounting, as we will consider the current
request to already be completed (prior to deferred seqno assignment) but
ring->last_retired_head would have been updated and still could allow
us to overwrite the current request before execution.

We also employed two different mechanisms to track the active context
until it was switched out. The legacy method allowed for waiting upon an
active context (it could forcibly evict any vma, including context's),
but the execlists method took a step backwards by pinning the vma for
the entire active lifespan of the context (the only way to evict was to
idle the entire GPU, not individual contexts). However, to circumvent
the tricky issue of locking (i.e. we cannot take struct_mutex at the
time of i915_gem_request_submit(), where we would want to move the
previous context onto the active tracker and unpin it), we take the
execlists approach and keep the contexts pinned until retirement.
The benefit of the execlists approach, more important for execlists than
legacy, was the reduction in work in pinning the context for each
request - as the context was kept pinned until idle, it could short
circuit the pinning for all active contexts.

We introduce new engine vfuncs to pin and unpin the context
respectively. The context is pinned at the start of the request, and
only unpinned when the following request is retired (this ensures that
the context is idle and coherent in main memory before we unpin it). We
move the engine->last_context tracking into the retirement itself
(rather than during request submission) in order to allow the submission
to be reordered or unwound without undue difficultly.

And finally an ulterior motive for unifying context handling was to
prepare for mock requests.

v2: Rename to last_retired_context, split out legacy_context tracking
for MI_SET_CONTEXT.
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: NTvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20161218153724.8439-3-chris@chris-wilson.co.uk

We usually use 'client' as identifier for the i915_guc_client.
For unknown reason, few functions were using 'gc' name.
Signed-off-by: NMichal Wajdeczko <michal.wajdeczko@intel.com>
Reviewed-by: NJoonas Lahtinen <joonas.lahtinen@linux.intel.com>
[joonas.lahtinen@linux.intel.com: Split two lines over 80]
Signed-off-by: NJoonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20161215195321.63804-1-michal.wajdeczko@intel.com

Like GEM init, GUC init, MOCS init and context creation.

Enables them to lose dev_priv locals.
Signed-off-by: NTvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: NChris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: NJoonas Lahtinen <joonas.lahtinen@linux.intel.com>

Makes all GEM object constructors consistent.

v2: Fix compilation in GVT code.
Signed-off-by: NTvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: NChris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> (v1)

Something I missed before sending off the partial series was that the
non-scheduler guc reset path was broken (in the full series, this is
pushed to the execlists reset handler). The issue is that after a reset,
we have to refill the GuC workqueues, which we do by resubmitting the
requests. However, if we already have submitted them, the fences within
them have already been used and triggering them again is an error.
Instead, just repopulate the guc workqueue.

[  115.858560] [IGT] gem_busy: starting subtest hang-render
[  135.839867] [drm] GPU HANG: ecode 9:0:0xe757fefe, in gem_busy [1716], reason: Hang on render ring, action: reset
[  135.839902] drm/i915: Resetting chip after gpu hang
[  135.839957] [drm] RC6 on
[  135.858351] ------------[ cut here ]------------
[  135.858357] WARNING: CPU: 2 PID: 45 at drivers/gpu/drm/i915/i915_sw_fence.c:108 i915_sw_fence_complete+0x25/0x30
[  135.858357] Modules linked in: rfcomm bnep binfmt_misc nls_iso8859_1 input_leds snd_hda_codec_hdmi snd_hda_codec_realtek snd_hda_codec_generic snd_hda_intel snd_hda_codec snd_hda_core btusb btrtl snd_hwdep snd_pcm 8250_dw snd_seq_midi hid_lenovo snd_seq_midi_event snd_rawmidi iwlwifi x86_pkg_temp_thermal coretemp snd_seq crct10dif_pclmul snd_seq_device hci_uart snd_timer crc32_pclmul ghash_clmulni_intel idma64 aesni_intel virt_dma btbcm snd btqca aes_x86_64 btintel lrw cfg80211 bluetooth gf128mul glue_helper ablk_helper cryptd soundcore intel_lpss_pci intel_pch_thermal intel_lpss_acpi intel_lpss acpi_als mfd_core kfifo_buf acpi_pad industrialio autofs4 hid_plantronics usbhid dm_mirror dm_region_hash dm_log sdhci_pci ahci sdhci libahci i2c_hid hid
[  135.858389] CPU: 2 PID: 45 Comm: kworker/2:1 Tainted: G        W       4.9.0-rc4+ #238
[  135.858389] Hardware name:                  /NUC6i3SYB, BIOS SYSKLi35.86A.0024.2015.1027.2142 10/27/2015
[  135.858392] Workqueue: events_long i915_hangcheck_elapsed
[  135.858394]  ffffc900001bf9b8 ffffffff812bb238 0000000000000000 0000000000000000
[  135.858396]  ffffc900001bf9f8 ffffffff8104f621 0000006c00000000 ffff8808296137f8
[  135.858398]  0000000000000a00 ffff8808457a0000 ffff880845764e60 ffff880845760000
[  135.858399] Call Trace:
[  135.858403]  [<ffffffff812bb238>] dump_stack+0x4d/0x65
[  135.858405]  [<ffffffff8104f621>] __warn+0xc1/0xe0
[  135.858406]  [<ffffffff8104f748>] warn_slowpath_null+0x18/0x20
[  135.858408]  [<ffffffff813f8c15>] i915_sw_fence_complete+0x25/0x30
[  135.858410]  [<ffffffff813f8fad>] i915_sw_fence_commit+0xd/0x30
[  135.858412]  [<ffffffff8142e591>] __i915_gem_request_submit+0xe1/0xf0
[  135.858413]  [<ffffffff8142e5c8>] i915_gem_request_submit+0x28/0x40
[  135.858415]  [<ffffffff814433e7>] i915_guc_submit+0x47/0x210
[  135.858417]  [<ffffffff81443e98>] i915_guc_submission_enable+0x468/0x540
[  135.858419]  [<ffffffff81442495>] intel_guc_setup+0x715/0x810
[  135.858421]  [<ffffffff8142b6b4>] i915_gem_init_hw+0x114/0x2a0
[  135.858423]  [<ffffffff813eeaa8>] i915_reset+0xe8/0x120
[  135.858424]  [<ffffffff813f3937>] i915_reset_and_wakeup+0x157/0x180
[  135.858426]  [<ffffffff813f79db>] i915_handle_error+0x1ab/0x230
[  135.858428]  [<ffffffff812c760d>] ? scnprintf+0x4d/0x90
[  135.858430]  [<ffffffff81435985>] i915_hangcheck_elapsed+0x275/0x3d0
[  135.858432]  [<ffffffff810668cf>] process_one_work+0x12f/0x410
[  135.858433]  [<ffffffff81066bf3>] worker_thread+0x43/0x4d0
[  135.858435]  [<ffffffff81066bb0>] ? process_one_work+0x410/0x410
[  135.858436]  [<ffffffff81066bb0>] ? process_one_work+0x410/0x410
[  135.858438]  [<ffffffff8106bbb4>] kthread+0xd4/0xf0
[  135.858440]  [<ffffffff8106bae0>] ? kthread_park+0x60/0x60

v2: Only resubmit submitted requests
v3: Don't forget the pending requests have reserved space.

Fixes: d55ac5bf ("drm/i915: Defer transfer onto execution timeline to actual hw submission")
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: NTvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20161129121024.22650-6-chris@chris-wilson.co.uk

In order to avoid some complexity in trying to reconstruct the
workqueues across reset, remember them instead. The issue comes when we
have to handle a reset between request allocation and submission, the
request has reserved space in the wq, but is not in any list so we fail
to restore the reserved space. By keeping the execbuf client intact
across the reset, we also keep the reservations.
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: NTvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20161129121024.22650-5-chris@chris-wilson.co.uk

Set the initial value of the doorbell cookie from the client.
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: NTvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20161129121024.22650-4-chris@chris-wilson.co.uk

The client->cookie is a shadow of the doorbell->cookie value, so rename
it to indicate its association with the doorbell, like the doorbell id
and offset.
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: NTvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20161129121024.22650-3-chris@chris-wilson.co.uk

Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Michal Winiarski <michal.winiarski@intel.com>
Signed-off-by: NArkadiusz Hiler <arkadiusz.hiler@intel.com>
Reviewed-by: NChris Wilson <chris@chris-wilson.co.uk>
Link: http://patchwork.freedesktop.org/patch/msgid/1480096777-12573-6-git-send-email-arkadiusz.hiler@intel.comSigned-off-by: NChris Wilson <chris@chris-wilson.co.uk>

send_mutex is used to serialise communication with GuC via
intel_guc_send().

Since functions that utilize it are no longer limited to submission,
initialization should be handled as a part of general setup.

v2: move initialization to *_early()

Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Michal Winiarski <michal.winiarski@intel.com>
Signed-off-by: NArkadiusz Hiler <arkadiusz.hiler@intel.com>
Reviewed-by: NChris Wilson <chris@chris-wilson.co.uk>
Link: http://patchwork.freedesktop.org/patch/msgid/1480096777-12573-5-git-send-email-arkadiusz.hiler@intel.comSigned-off-by: NChris Wilson <chris@chris-wilson.co.uk>

guc_send(), guc_recv() and related functions were introduced in the
i915_guc_submission.c and their scope was limited only to that file.

Those are not submission specific though.
This patch moves moves them to intel_uc.c with intel_ prefix added.

v2: rename intel_guc_log_* functions and clean up intel_guc_send usages

Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Michal Winiarski <michal.winiarski@intel.com>
Signed-off-by: NArkadiusz Hiler <arkadiusz.hiler@intel.com>
Reviewed-by: NChris Wilson <chris@chris-wilson.co.uk>
Link: http://patchwork.freedesktop.org/patch/msgid/1480096777-12573-4-git-send-email-arkadiusz.hiler@intel.comSigned-off-by: NChris Wilson <chris@chris-wilson.co.uk>

To facilitate code reorganization we are renaming everything that
contains guc2host or host2guc.

host2guc_action() and host2guc_action_response() become guc_send()
and guc_recv() respectively.

Other host2guc_*() functions become simply guc_*().

Other entities are renamed basing on context they appear in:
 - HOST2GUC_ACTIONS_&           become INTEL_GUC_ACTION_*
 - HOST2GUC_{INTERRUPT,TRIGGER} become GUC_SEND_{INTERRUPT,TRIGGER}
 - GUC2HOST_STATUS_*            become INTEL_GUC_STATUS_*
 - GUC2HOST_MSG_*               become INTEL_GUC_RECV_MSG_*
 - action_lock                 becomes send_mutex

v2: drop unnecessary backslashes and use BIT() instead of '<<'
v3: shortened enum names and INTEL_GUC_STATUS_*

Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Michal Winiarski <michal.winiarski@intel.com>
Signed-off-by: NArkadiusz Hiler <arkadiusz.hiler@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1480096777-12573-3-git-send-email-arkadiusz.hiler@intel.comReviewed-by: NChris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>

GuC is not the only one micro controller we have.

There are also HuC and DMC.

Making the file more general will help with code organization.

Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Michal Winiarski <michal.winiarski@intel.com>
Signed-off-by: NArkadiusz Hiler <arkadiusz.hiler@intel.com>
Reviewed-by: NChris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Link: http://patchwork.freedesktop.org/patch/msgid/1480096777-12573-2-git-send-email-arkadiusz.hiler@intel.com

Track the priority of each request and use it to determine the order in
which we submit requests to the hardware via execlists.

The priority of the request is determined by the user (eventually via
the context) but may be overridden at any time by the driver. When we set
the priority of the request, we bump the priority of all of its
dependencies to match - so that a high priority drawing operation is not
stuck behind a background task.

When the request is ready to execute (i.e. we have signaled the submit
fence following completion of all its dependencies, including third
party fences), we put the request into a priority sorted rbtree to be
submitted to the hardware. If the request is higher priority than all
pending requests, it will be submitted on the next context-switch
interrupt as soon as the hardware has completed the current request. We
do not currently preempt any current execution to immediately run a very
high priority request, at least not yet.

One more limitation, is that this is first implementation is for
execlists only so currently limited to gen8/gen9.

v2: Replace recursive priority inheritance bumping with an iterative
depth-first search list.
v3: list_next_entry() for walking lists
v4: Explain how the dfs solves the recursion problem with PI.
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: NTvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20161114204105.29171-8-chris@chris-wilson.co.uk

Defer the transfer from the client's timeline onto the execution
timeline from the point of readiness to the point of actual submission.
For example, in execlists, a request is finally submitted to hardware
when the hardware is ready, and only put onto the hardware queue when
the request is ready. By deferring the transfer, we ensure that the
timeline is maintained in retirement order if we decide to queue the
requests onto the hardware in a different order than fifo.

v2: Rebased onto distinct global/user timeline lock classes.
v3: Play with the position of the spin_lock().
v4: Nesting finally resolved with distinct sw_fence lock classes.
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: NTvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20161114204105.29171-4-chris@chris-wilson.co.uk

Use i915_gem_object_pin_map() for the guc client's lifetime to replace
the peristent kmap + frequent kmap_atomic with a permanent vmapping.
This avoids taking the obj->mm.lock mutex whilst inside irq context
later.

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=98571
Fixes: 96d77634 ("drm/i915: Use a radixtree for random access...");
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Link: http://patchwork.freedesktop.org/patch/msgid/20161102175051.29163-9-chris@chris-wilson.co.ukReviewed-by: NTvrtko Ursulin <tvrtko.ursulin@intel.com>

Though we will have multiple timelines, we still have a single timeline
of execution. This we can use to provide an execution and retirement order
of requests. This keeps tracking execution of requests simple, and vital
for preserving a single waiter (i.e. so that we can order the waiters so
that only the earliest to wakeup need be woken). To accomplish this we
distinguish the seqno used to order requests per-context (external) and
that used internally for execution.
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: NJoonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20161028125858.23563-26-chris@chris-wilson.co.uk

Our timelines are more than just a seqno. They also provide an ordered
list of requests to be executed. Due to the restriction of handling
individual address spaces, we are limited to a timeline per address
space but we use a fence context per engine within.

Our first step to introducing independent timelines per context (i.e. to
allow each context to have a queue of requests to execute that have a
defined set of dependencies on other requests) is to provide a timeline
abstraction for the global execution queue.
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: NJoonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20161028125858.23563-23-chris@chris-wilson.co.uk

Driver accesses the ringbuffer pages, via GMADR BAR, if the pages are
pinned in mappable aperture portion of GGTT and for ringbuffer pages
allocated from Stolen memory, access can only be done through GMADR BAR.
In case of GuC based submission, updates done in ringbuffer via GMADR
may not get committed to memory by the time the Command streamer starts
reading them, resulting in fetching of stale data.

For Host based submission, such problem is not there as the write to Ring
Tail or ELSP register happens from the Host side prior to submission.
Access to any GFX register from CPU side goes to GTTMMADR BAR and Hw already
enforces the ordering between outstanding GMADR writes & new GTTMADR access.
MMIO writes from GuC side do not go to GTTMMADR BAR as GuC communication to
registers within GT is contained within GT, so ordering is not enforced
resulting in a race, which can manifest in form of a hang.

To ensure the flush of in-flight GMADR writes, a POSTING READ is done to
GuC register prior to doorbell ring.
There is already a similar WA in i915_gem_object_flush_gtt_write_domain(),
which takes care of GMADR writes from User space to GEM buffers, but not the
ringbuffer writes from KMD.
This WA is needed on all recent HW.

v2:
- Use POSTING_READ_FW instead of POSTING_READ as GuC register do not lie
  in any forcewake domain range and so the overhead of spinlock & search
  in the forcewake table is avoidable. (Chris)

Cc: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: NSagar Arun Kamble <sagar.a.kamble@intel.com>
Signed-off-by: NAkash Goel <akash.goel@intel.com>
Reviewed-by: NChris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Link: http://patchwork.freedesktop.org/patch/msgid/1477413323-1880-1-git-send-email-akash.goel@intel.com

The GuC log buffer flush work item has to do a register access to send the
ack to GuC and this work item, if not synced before suspend, can potentially
get executed after the GFX device is suspended. This work item function uses
rpm get/put calls around the Hw access, which covers the rpm suspend case
but for system suspend a sync would be required as kernel can potentially
schedule the work items even after some devices, including GFX, have been
put to suspend. But sync has to be done only for the system suspend case,
as sync along with rpm get/put can cause a deadlock for rpm suspend path.
To have the sync, but like a NOOP, for rpm suspend path also this work
item could have been queued from the irq handler only when the device is
runtime active & kept active while that work item is pending or getting
executed but an interrupt can come even after the device is out of use and
so can potentially lead to missing of this work item.

By marking the workqueue, dedicated for handling GuC log buffer flush
interrupts, as freezable we don't have to bother about flushing of this
work item from the suspend hooks, the pending work item if any will be
either executed before the suspend or scheduled later on resume. This way
the handling of log buffer flush work item can be kept same between system
suspend & rpm suspend.
Suggested-by: NImre Deak <imre.deak@intel.com>
Cc: Imre Deak <imre.deak@intel.com>
Signed-off-by: NAkash Goel <akash.goel@intel.com>
Reviewed-by: NImre Deak <imre.deak@intel.com>
Signed-off-by: NTvrtko Ursulin <tvrtko.ursulin@intel.com>

As per the current i915 Driver load sequence, debugfs registration is done
at the end and so the relay channel debugfs file is also created after that
but the GuC firmware is loaded much earlier in the sequence.
As a result Driver could miss capturing the boot-time logs of GuC firmware
if there are flush interrupts from the GuC side.
Relay has a provision to support early logging where initially only relay
channel can be created, to have buffers for storing logs, and later on
channel can be associated with a debugfs file at appropriate time.
Have availed that, which allows Driver to capture boot time logs also,
which can be collected once Userspace comes up.

v2:
- Remove the couple of FIXMEs, as now the relay channel will be created
  early before enabling the flush interrupts, so no possibility of relay
  channel pointer being modified & read at the same time from 2 different
  execution contexts.
- Rebase.

v3:
- Add a comment to justiy setting 'is_global' before the NULL check on the
  parent directory dentry pointer.
Suggested-by: NChris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: NAkash Goel <akash.goel@intel.com>
Reviewed-by: NTvrtko Ursulin <tvrtko.ursulin@intel.com>
Signed-off-by: NTvrtko Ursulin <tvrtko.ursulin@intel.com>

To ensure that we always get the up-to-date data from log buffer, its
better to access the buffer through an uncached CPU mapping. Also the way
buffer is accessed from GuC & Host side, manually doing cache flush may
not be effective always if cached CPU mapping is used. In order to avoid
any performance drop & have fast reads from the GuC log buffer, used SSE4.1
movntdqa based memcpy function i915_memcpy_from_wc, as copying using
movntqda from WC type memory is almost as fast as reading from WB memory.
This way log buffer sampling time will not get increased and so would be
able to deal with the flush interrupt storm when GuC is generating logs at
a very high rate.
Ideally SSE 4.1 should be present on all chipsets supporting GuC based
submisssions, but if not then logging will not be enabled.

v2: Rebase.

v3: Squash the WC type vmalloc mapping patch with this patch. (Chris)
Suggested-by: NChris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: NAkash Goel <akash.goel@intel.com>
Reviewed-by: NTvrtko Ursulin <tvrtko.ursulin@intel.com>
Signed-off-by: NTvrtko Ursulin <tvrtko.ursulin@intel.com>

This patch provides debugfs interface i915_guc_output_control for
on the fly enabling/disabling of logging in GuC firmware and controlling
the verbosity level of logs.
The value written to the file, should have bit 0 set to enable logging and
bits 4-7 should contain the verbosity info.

v2: Add a forceful flush, to collect left over logs, on disabling logging.
    Useful for Validation.

v3: Besides minor cleanup, implement read method for the debugfs file and
    set the guc_log_level to -1 when logging is disabled. (Tvrtko)

v4: Minor cleanup & rebase. (Tvrtko)

v5:
- Lock struct_mutex after the NULL check for guc log buffer vma. (Chris)
- Rebase.
Signed-off-by: NSagar Arun Kamble <sagar.a.kamble@intel.com>
Signed-off-by: NAkash Goel <akash.goel@intel.com>
Reviewed-by: NTvrtko Ursulin <tvrtko.ursulin@intel.com>
Signed-off-by: NTvrtko Ursulin <tvrtko.ursulin@intel.com>

GuC firmware sends a flush interrupt to Host when the log buffer is half
full and at that time only it updates the log buffer state.
But in certain cases, as described below, it could be useful to have all
that even when log buffer is only partially full. For that there is a force
log buffer flush Host2GuC action supported by GuC firmware.

For Validation requirements, a forceful flush is needed to collect the
left over logs on disabling logging. The same can be done before proceeding
with GPU/GuC reset as there could be some data in log buffer which is yet
to be captured and those logs would be particularly useful to understand
that why the reset was initiated.
Signed-off-by: NSagar Arun Kamble <sagar.a.kamble@intel.com>
Signed-off-by: NAkash Goel <akash.goel@intel.com>
Reviewed-by: NTvrtko Ursulin <tvrtko.ursulin@intel.com>
Signed-off-by: NTvrtko Ursulin <tvrtko.ursulin@intel.com>

GuC firmware sends an interrupt to flush the log buffer when it becomes
half full, so Driver doesn't really need to sample the complete buffer
and can just copy only the newly written data by GuC into the local
buffer, i.e. as per the read & write pointer values.
Moreover the flush interrupt would generally come for one type of log
buffer, when it becomes half full, so at that time the other 2 types of
log buffer would comparatively have much lesser unread data in them.
In case of overflow reported by GuC, Driver do need to copy the entire
buffer as the whole buffer would contain the unread data.

v2: Rebase.

v3: Fix the blooper of doing the copy twice. (Tvrtko)

v4: Add curlies for 'else' case also, matching the 'if'. (Tvrtko)
Signed-off-by: NAkash Goel <akash.goel@intel.com>
Reviewed-by: NTvrtko Ursulin <tvrtko.ursulin@intel.com>
Signed-off-by: NTvrtko Ursulin <tvrtko.ursulin@intel.com>

GuC firmware sends an interrupt to flush the log buffer when it
becomes half full. GuC firmware also tracks how many times the
buffer overflowed.
It would be useful to maintain a statistics of how many flush
interrupts were received and for which type of log buffer,
along with the overflow count of each buffer type.
Augmented i915_log_info debugfs to report back these statistics.

v2:
- Update the logic to detect multiple overflows between the 2
  flush interrupts and also log a message for overflow (Tvrtko)
- Track the number of times there was no free sub buffer to capture
  the GuC log buffer. (Tvrtko)

v3:
- Fix the printf field width for overflow counter, set it to 10 as per the
  max value of u32, which takes 10 digits in decimal form. (Tvrtko)

v4:
- Move the log buffer overflow handling to a new function for better
  readability. (Tvrtko)
Signed-off-by: NAkash Goel <akash.goel@intel.com>
Reviewed-by: NTvrtko Ursulin <tvrtko.ursulin@intel.com>
Signed-off-by: NTvrtko Ursulin <tvrtko.ursulin@intel.com>

With the addition of new Host2GuC actions related to GuC logging, there
is a need of a lock to serialize them, as they can execute concurrently
with each other and also with other existing actions.

v2: Use mutex in place of spinlock to serialize, as sleep can happen
    while waiting for the action's response from GuC. (Tvrtko)

v3: To conform to the general rules, acquire mutex before taking the
    forcewake. (Tvrtko)
Signed-off-by: NAkash Goel <akash.goel@intel.com>
Reviewed-by: NTvrtko Ursulin <tvrtko.ursulin@intel.com>
Signed-off-by: NTvrtko Ursulin <tvrtko.ursulin@intel.com>

Added a new debugfs interface '/sys/kernel/debug/dri/guc_log' for the
User to capture GuC firmware logs. Availed relay framework to implement
the interface, where Driver will have to just use a relay API to store
snapshots of the GuC log buffer in the buffer managed by relay.
The snapshot will be taken when GuC firmware sends a log buffer flush
interrupt and up to four snapshots could be stored in the relay buffer.
The relay buffer will be operated in a mode where it will overwrite the
data not yet collected by User.
Besides mmap method, through which User can directly access the relay
buffer contents, relay also supports the 'poll' method. Through the 'poll'
call on log file, User can come to know whenever a new snapshot of the
log buffer is taken by Driver, so can run in tandem with the Driver and
capture the logs in a sustained/streaming manner, without any loss of data.

v2: Defer the creation of relay channel & associated debugfs file, as
    debugfs setup is now done at the end of i915 Driver load. (Chris)

v3:
- Switch to no-overwrite mode for relay.
- Fix the relay sub buffer switching sequence.

v4:
- Update i915 Kconfig to select RELAY config. (TvrtKo)
- Log a message when there is no sub buffer available to capture
  the GuC log buffer. (Tvrtko)
- Increase the number of relay sub buffers to 8 from 4, to have
  sufficient buffering for boot time logs

v5:
- Fix the alignment, indentation issues and some minor cleanup. (Tvrtko)
- Update the comment to elaborate on why a relay channel has to be
  associated with the debugfs file. (Tvrtko)

v6:
- Move the write to 'is_global' after the NULL check on parent directory
  dentry pointer. (Tvrtko)

v7: Add a BUG_ON to validate relay buffer allocation size. (Chris)

Testcase: igt/tools/intel_guc_logger
Suggested-by: NChris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: NSourab Gupta <sourab.gupta@intel.com>
Signed-off-by: NAkash Goel <akash.goel@intel.com>
Reviewed-by: NTvrtko Ursulin <tvrtko.ursulin@intel.com>
Signed-off-by: NTvrtko Ursulin <tvrtko.ursulin@intel.com>