提交 cbf4b77a 编写于 作者: T Tvrtko Ursulin

drm/i915/guc: Fix request re-submission after reset

In order to ensure no missed interrupts we must first re-direct
the interrupts to GuC, and only then re-submit the requests to
be replayed after a GPU reset. Otherwise context switch can fire
before GuC has been set up to receive it triggering more hangs.

v2: Rebase.
Signed-off-by: NTvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Cc: Oscar Mateo <oscar.mateo@intel.com>
Cc: Sagar Arun Kamble <sagar.a.kamble@intel.com>
Cc: Arkadiusz Hiler <arkadiusz.hiler@intel.com>
Reviewed-by: NChris Wilson <chris@chris-wilson.co.uk>
Link: http://patchwork.freedesktop.org/patch/msgid/20170309132005.1317-1-tvrtko.ursulin@linux.intel.com
上级 7342a72c
......@@ -936,6 +936,26 @@ static void guc_reset_wq(struct i915_guc_client *client)
client->wq_tail = 0;
}
static void guc_interrupts_capture(struct drm_i915_private *dev_priv)
{
struct intel_engine_cs *engine;
enum intel_engine_id id;
int irqs;
/* tell all command streamers to forward interrupts (but not vblank) to GuC */
irqs = _MASKED_BIT_ENABLE(GFX_INTERRUPT_STEERING);
for_each_engine(engine, dev_priv, id)
I915_WRITE(RING_MODE_GEN7(engine), irqs);
/* route USER_INTERRUPT to Host, all others are sent to GuC. */
irqs = GT_RENDER_USER_INTERRUPT << GEN8_RCS_IRQ_SHIFT |
GT_RENDER_USER_INTERRUPT << GEN8_BCS_IRQ_SHIFT;
/* These three registers have the same bit definitions */
I915_WRITE(GUC_BCS_RCS_IER, ~irqs);
I915_WRITE(GUC_VCS2_VCS1_IER, ~irqs);
I915_WRITE(GUC_WD_VECS_IER, ~irqs);
}
int i915_guc_submission_enable(struct drm_i915_private *dev_priv)
{
struct intel_guc *guc = &dev_priv->guc;
......@@ -953,13 +973,17 @@ int i915_guc_submission_enable(struct drm_i915_private *dev_priv)
/* Take over from manual control of ELSP (execlists) */
for_each_engine(engine, dev_priv, id) {
const int wqi_size = sizeof(struct guc_wq_item);
struct drm_i915_gem_request *rq;
engine->submit_request = i915_guc_submit;
engine->schedule = NULL;
}
guc_interrupts_capture(dev_priv);
/* Replay the current set of previously submitted requests */
for_each_engine(engine, dev_priv, id) {
const int wqi_size = sizeof(struct guc_wq_item);
struct drm_i915_gem_request *rq;
/* Replay the current set of previously submitted requests */
spin_lock_irq(&engine->timeline->lock);
list_for_each_entry(rq, &engine->timeline->requests, link) {
guc_client_update_wq_rsvd(client, wqi_size);
......
......@@ -109,26 +109,6 @@ static void guc_interrupts_release(struct drm_i915_private *dev_priv)
I915_WRITE(GUC_WD_VECS_IER, 0);
}
static void guc_interrupts_capture(struct drm_i915_private *dev_priv)
{
struct intel_engine_cs *engine;
enum intel_engine_id id;
int irqs;
/* tell all command streamers to forward interrupts (but not vblank) to GuC */
irqs = _MASKED_BIT_ENABLE(GFX_INTERRUPT_STEERING);
for_each_engine(engine, dev_priv, id)
I915_WRITE(RING_MODE_GEN7(engine), irqs);
/* route USER_INTERRUPT to Host, all others are sent to GuC. */
irqs = GT_RENDER_USER_INTERRUPT << GEN8_RCS_IRQ_SHIFT |
GT_RENDER_USER_INTERRUPT << GEN8_BCS_IRQ_SHIFT;
/* These three registers have the same bit definitions */
I915_WRITE(GUC_BCS_RCS_IER, ~irqs);
I915_WRITE(GUC_VCS2_VCS1_IER, ~irqs);
I915_WRITE(GUC_WD_VECS_IER, ~irqs);
}
static u32 get_gttype(struct drm_i915_private *dev_priv)
{
/* XXX: GT type based on PCI device ID? field seems unused by fw */
......@@ -503,7 +483,6 @@ int intel_guc_setup(struct drm_i915_private *dev_priv)
err = i915_guc_submission_enable(dev_priv);
if (err)
goto fail;
guc_interrupts_capture(dev_priv);
}
DRM_INFO("GuC %s (firmware %s [version %u.%u])\n",
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册