This inits the card pipes in the kernel and lets userspace getparam
the correct setup.
Signed-off-by: NDave Airlie <airlied@redhat.com>

Signed-off-by: NDave Airlie <airlied@redhat.com>

We only support RS480 (AMD based IGP) at the moment not
RS400 (Intel based IGP) ones.
Signed-off-by: NDave Airlie <airlied@redhat.com>

Signed-off-by: NDave Airlie <airlied@redhat.com>

Signed-off-by: NDave Airlie <airlied@redhat.com>

This reverts commit ac741ab7.

Okay this looks like wasn't as fully baked as I'd led myself to believe.

Revert for now for further baking.
Signed-off-by: NDave Airlie <airlied@redhat.com>

Other Authors: Michel Dänzer <michel@tungstengraphics.com>
mga: Ian Romanick <idr@us.ibm.com>
via: Thomas Hellstrom <thomas-at-tungstengraphics-dot-com>

This re-works the DRM internals to provide a better interface for drivers
to expose vblank on multiple crtcs.

It also includes work done by Michel on making i915 triple buffering and pageflipping work properly.
Signed-off-by: NDave Airlie <airlied@redhat.com>

This adds support for configuring the RS690 GART.
Signed-off-by: NDave Airlie <airlied@redhat.com>

This adds CP support for the r500 series of chips, and allows
accel 2D support on these chips with a new radeon driver.
Signed-off-by: NDave Airlie <airlied@redhat.com>

Signed-off-by: NDave Airlie <airlied@linux.ie>

As DRM_DEBUG macro already prints out the __FUNCTION__ string (see
drivers/char/drm/drmP.h), it is not worth doing this again. At some
other places the ending "\n" was added.

airlied:- I cleaned up a few that this patch missed also
Signed-off-by: NDave Airlie <airlied@linux.ie>

Signed-off-by: NDave Airlie <airlied@linux.ie>

This code relied on the CPU and GPU address for the aperture being the same,
On some r5xx hardware I was playing with I noticed that this isn't always true.
This fixes issues seen on some r400 cards. (bugs.freedesktop.org 9957)
Signed-off-by: NDave Airlie <airlied@redhat.com>

The data is now in kernel space, copied in/out as appropriate according to t
This results in DRM_COPY_{TO,FROM}_USER going away, and error paths to deal
with those failures.  This also means that XFree86 4.2.0 support for i810 DR
is lost.
Signed-off-by: NDave Airlie <airlied@linux.ie>

As a fallout, replace filp storage with file_priv storage for "unique
identifier of a client" all over the DRM.  There is a 1:1 mapping, so this
should be a noop.  This could be a minor performance improvement, as everyth
on Linux dereferenced filp to get file_priv anyway, while only the mmap ioct
went the other direction.
Signed-off-by: NDave Airlie <airlied@linux.ie>

Signed-off-by: NDave Airlie <airlied@linux.ie>

Signed-off-by: NDave Airlie <airlied@linux.ie>

some drivers still todo.
Signed-off-by: NDave Airlie <airlied@linux.ie>

This moves a bunch of typedefs into a !defined __KERNEL__ to keep userspace
API compatiblity, it changes all internal usages to structs/enum/unions.
Signed-off-by: NDave Airlie <airlied@linux.ie>

This adds support for CRTC2 vblank on radeon similiar to the i915.
Signed-off-by: NDave Airlie <airlied@linux.ie>

There can still be other contexts that may use page flipping later on, so do
just unilaterally 'clean it up', which could lead to the wrong page being
displayed, e.g. when running 3D apps with a GLX compositing manager such as
compiz using page flipping.
Signed-off-by: NDave Airlie <airlied@linux.ie>

radeon: make PCI GART aperture size variable, but making table size variable
    This is precursor to getting a TTM backend for this stuff, and also
    allows the PCI table to be allocated at fb 0
radeon: add support for reverse engineered xpress200m

    The IGPGART setup code was traced using mmio-trace on fglrx by myself
    and Phillip Ezolt <phillipezolt@gmail.com> on dri-devel.

    This code doesn't let the 3D driver work properly as the card has no
    vertex shader support.

    Thanks to Matthew Garrett + Ubuntu for providing me some hardware to do this
    work on.
Signed-off-by: NDave Airlie <airlied@linux.ie>

Replace r300_check_offset() with generic radeon_check_offset(), which doesn't
reject valid offsets when the framebuffer area is at the very end of the card's
32 bit address space. Make radeon_check_and_fixup_offset() use
radeon_check_offset() as well.

This fixes https://bugs.freedesktop.org/show_bug.cgi?id=7697 .

This takes up two more ring buffer entries per rectangle blitted but makes sure
the blit is performed top to bottom, reducing the likelyhood of tearing.
Signed-off-by: NDave Airlie <airlied@linux.ie>

Signed-off-by: NDave Airlie <airlied@linux.ie>

this applies some minor cleanups for the radeon driver, to use the
3D flush and reset the AGP flags on X recycle
Signed-off-by: NDave Airlie <airlied@linux.ie>

The latter seems to be a read-only mirror of the former.
Signed-off-by: NDave Airlie <airlied@linux.ie>

When writeback isn't used, actually disable it in the hardware.

Not doing this might waste bus bandwidth or even cause memory corruption or
system crashes on systems that check bus transfers. No such incident has been
reported though.
Signed-off-by: NDave Airlie <airlied@linux.ie>

Add support for r200 vertex programs (R200_EMIT_VAP_PVS_CNTL, and new
packet type for making it possible to address whole tcl vector space
and have a larger count)

From: Roland Scheidegger (DRM CVS)
Signed-off-by: NDave Airlie <airlied@linux.ie>

Do a tcl state flush before accessing tcl vector space. This fixes some
more problems with flickering (bug #6637). drm may not be appropriate
place for this, since doing that flush there might both be overkill and
insufficient in some cases. However, it's hard to figure out when that
flush is needed, so this has to suffice. There does not seem to be a
performance penalty associated with it.

From: Roland Scheidegger (DRM CVS)
Signed-off-by: NDave Airlie <airlied@linux.ie>

This adds all the r300 and r400 PCI ids from DRM CVS, it also
makes these cards only initialise when the new xorg driver is
used, as otherwise the DRM can cause lockups.
Signed-off-by: NDave Airlie <airlied@linux.ie>

This is the start of some work from Roland Scheidegger to align
the X DDX pci ids and the drm ones, however we don't want to put
r300 ids in the kernel just yet, they destabilise a few machines.

From: Roland Scheidegger (via DRM CVS)
Signed-off-by: NDave Airlie <airlied@linux.ie>

From: Aapo Tahkola (via DRM CVS)
Signed-off-by: NDave Airlie <airlied@linux.ie>

This code reworks the radeon memory map so it works better
for newer r300 chips and for a lot of older PCI chips.

It really requires a new X driver in order to take advantage of this code.

From: Ben Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: NDave Airlie <airlied@linux.ie>

The Xgl on r300 doesn't work unless you add a verify bitblt function to the
DRM, and we need to pass TX_CNTL to flush texture caches.
Signed-off-by: NDave Airlie <airlied@linux.ie>

this snuck back in, in the last merge.
Signed-off-by: NDave Airlie <airlied@linux.ie>

This patch pull in a lot of changes from CVS to the main core DRM,
and updates the radeon driver to 1.21.0 that supports r300 texrect
and radeon card type ioctl.
Signed-off-by: NDave Airlie <airlied@linux.ie>

This finally fixes the radeon memory mapping bug that was incorrectly
fixed by the previous patch.  This time, we use the actual vram size as
the size to calculate how far to move the AGP aperture from the
framebuffer in card's memory space.

If there are still issues with this patch, they are due to bugs in the X
driver that I'm working on fixing too.
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Mark M. Hoffman <mhoffman@lightlink.com>
Cc: Paul Mackerras <paulus@samba.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

We memset the structure across opens except for the flags. The correct
fix is more intrusive but this should fix a problem with bad iounmaps
seen on AGP radeons acting like PCI ones.
Signed-off-by: NDave Airlie <airlied@linux.ie>

This simplifies the sysfs code for the drm and add a dri_library_name
attribute which can be used by a userspace app to figure out which
library to load.

From: Jon Smirl <jonsmirl@gmail.com>
Signed-off-by: NDave Airlie <airlied@linux.ie>