提交 4e5e2e25 编写于 作者: D Dave Airlie

drm: radeon add r300 TX_CNTL and verify bitblt packets

The Xgl on r300 doesn't work unless you add a verify bitblt function to the
DRM, and we need to pass TX_CNTL to flush texture caches.
Signed-off-by: NDave Airlie <airlied@linux.ie>
上级 91e3738e
......@@ -161,6 +161,7 @@ void r300_init_reg_flags(void)
ADD_RANGE(R300_VAP_PVS_CNTL_1, 3);
ADD_RANGE(R300_GB_ENABLE, 1);
ADD_RANGE(R300_GB_MSPOS0, 5);
ADD_RANGE(R300_TX_CNTL, 1);
ADD_RANGE(R300_TX_ENABLE, 1);
ADD_RANGE(0x4200, 4);
ADD_RANGE(0x4214, 1);
......@@ -489,6 +490,52 @@ static __inline__ int r300_emit_3d_load_vbpntr(drm_radeon_private_t *dev_priv,
return 0;
}
static __inline__ int r300_emit_bitblt_multi(drm_radeon_private_t *dev_priv,
drm_radeon_kcmd_buffer_t *cmdbuf)
{
u32 *cmd = (u32 *) cmdbuf->buf;
int count, ret;
RING_LOCALS;
count=(cmd[0]>>16) & 0x3fff;
if (cmd[0] & 0x8000) {
u32 offset;
if (cmd[1] & (RADEON_GMC_SRC_PITCH_OFFSET_CNTL
| RADEON_GMC_DST_PITCH_OFFSET_CNTL)) {
offset = cmd[2] << 10;
ret = r300_check_offset(dev_priv, offset);
if (ret)
{
DRM_ERROR("Invalid bitblt first offset is %08X\n", offset);
return DRM_ERR(EINVAL);
}
}
if ((cmd[1] & RADEON_GMC_SRC_PITCH_OFFSET_CNTL) &&
(cmd[1] & RADEON_GMC_DST_PITCH_OFFSET_CNTL)) {
offset = cmd[3] << 10;
ret = r300_check_offset(dev_priv, offset);
if (ret)
{
DRM_ERROR("Invalid bitblt second offset is %08X\n", offset);
return DRM_ERR(EINVAL);
}
}
}
BEGIN_RING(count+2);
OUT_RING(cmd[0]);
OUT_RING_TABLE((int *)(cmdbuf->buf + 4), count + 1);
ADVANCE_RING();
cmdbuf->buf += (count+2)*4;
cmdbuf->bufsz -= (count+2)*4;
return 0;
}
static __inline__ int r300_emit_raw_packet3(drm_radeon_private_t *dev_priv,
drm_radeon_kcmd_buffer_t *cmdbuf)
......@@ -527,6 +574,9 @@ static __inline__ int r300_emit_raw_packet3(drm_radeon_private_t *dev_priv,
case RADEON_3D_LOAD_VBPNTR: /* load vertex array pointers */
return r300_emit_3d_load_vbpntr(dev_priv, cmdbuf, header);
case RADEON_CNTL_BITBLT_MULTI:
return r300_emit_bitblt_multi(dev_priv, cmdbuf);
case RADEON_CP_3D_DRAW_IMMD_2: /* triggers drawing using in-packet vertex data */
case RADEON_CP_3D_DRAW_VBUF_2: /* triggers drawing of vertex buffers setup elsewhere */
case RADEON_CP_3D_DRAW_INDX_2: /* triggers drawing using indices to vertex buffer */
......
......@@ -451,6 +451,9 @@ I am fairly certain that they are correct unless stated otherwise in comments.
/* END */
/* gap */
/* Zero to flush caches. */
#define R300_TX_CNTL 0x4100
/* The upper enable bits are guessed, based on fglrx reported limits. */
#define R300_TX_ENABLE 0x4104
# define R300_TX_ENABLE_0 (1 << 0)
......
......@@ -90,9 +90,10 @@
* 1.19- Add support for gart table in FB memory and PCIE r300
* 1.20- Add support for r300 texrect
* 1.21- Add support for card type getparam
* 1.22- Add support for texture cache flushes (R300_TX_CNTL)
*/
#define DRIVER_MAJOR 1
#define DRIVER_MINOR 21
#define DRIVER_MINOR 22
#define DRIVER_PATCHLEVEL 0
/*
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册