Auto-Hibern8 may be disabled by some vendors or sysfs in runtime even if
Auto-Hibern8 capability is supported by host. If Auto-Hibern8 capability is
supported by host but not actually enabled, Auto-Hibern8 error shall not
happen.

To fix this, provide a way to detect if Auto-Hibern8 is actually enabled
first, and bypass Auto-Hibern8 disabling case in
ufshcd_is_auto_hibern8_error().

Fixes: 82174440 ("scsi: ufs: Add error-handling of Auto-Hibernate")
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20200129105251.12466-4-stanley.chu@mediatek.comReviewed-by: NBean Huo <beanhuo@micron.com>
Reviewed-by: NAlim Akhtar <alim.akhtar@samsung.com>
Reviewed-by: NAsutosh Das <asutoshd@codeaurora.org>
Reviewed-by: NCan Guo <cang@codeaurora.org>
Signed-off-by: NStanley Chu <stanley.chu@mediatek.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

If system suspend or runtime suspend mode is configured as linkoff state,
phy can be powered off and reference clock can be gated in MediaTek
Chipsets.

At the same time, remove redundant reference clock control in suspend and
resume callbacks because such control can be well-handled in setup_clocks
callback.

Link: https://lore.kernel.org/r/20200129105251.12466-3-stanley.chu@mediatek.comReviewed-by: NAlim Akhtar <alim.akhtar@samsung.com>
Reviewed-by: NBean Huo <beanhuo@micron.com>
Signed-off-by: NStanley Chu <stanley.chu@mediatek.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

MediaTek Chipsets can enter proprietary UniPro low-power mode during
suspend while link is in hibern8 state. Make sure leaving low-power mode
before every link startup to prevent lockup in any possible error recovery
path.

At the same time, re-factor related funcitons to improve code readability.

Link: https://lore.kernel.org/r/20200129105251.12466-2-stanley.chu@mediatek.comReviewed-by: NAlim Akhtar <alim.akhtar@samsung.com>
Reviewed-by: NBean Huo <beanhuo@micron.com>
Signed-off-by: NStanley Chu <stanley.chu@mediatek.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

There is a spelling mistake in a pr_err message. Fix it.

Link: https://lore.kernel.org/r/20200122091250.2777221-1-colin.king@canonical.comSigned-off-by: NColin Ian King <colin.king@canonical.com>
Reviewed-by: NBean Huo <beanhuo@micron.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

According to Jedec standard UFS 3.0 and UFS 2.1 Spec, Maximum number of
logical units supported by the UFS device is indicated by parameter
bMaxNumberLU in Geometry Descriptor. This patch is to delete current hard
code macro definition of UFS_UPIU_MAX_GENERAL_LUN, and switch to use device
indicated number instead.

Link: https://lore.kernel.org/r/20200120130820.1737-9-huobean@gmail.comReviewed-by: NAsutosh Das <asutoshd@codeaurora.org>
Reviewed-by: NAlim Akhtar <alim.akhtar@samsung.com>
Signed-off-by: NBean Huo <beanhuo@micron.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

Add one new parameter max_lu_supported in struct ufs_dev_info, which will
be used to express exactly how many general LUs being supported by UFS
device, and initialize it during booting stage.  This patch also adds a new
function ufshcd_device_geo_params_init() for initialization of UFS device
geometry descriptor related parameters.

Link: https://lore.kernel.org/r/20200120130820.1737-8-huobean@gmail.comReviewed-by: NAsutosh Das <asutoshd@codeaurora.org>
Reviewed-by: NAlim Akhtar <alim.akhtar@samsung.com>
Signed-off-by: NBean Huo <beanhuo@micron.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

Without variable is_init_prefetch, the current logic can guarantee
ufshcd_init_icc_levels() will execute only once, delete it now.

Link: https://lore.kernel.org/r/20200120130820.1737-7-huobean@gmail.comReviewed-by: NAsutosh Das <asutoshd@codeaurora.org>
Signed-off-by: NBean Huo <beanhuo@micron.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

Delete ufshcd_read_power_desc() and ufshcd_read_device_desc(), directly
inline ufshcd_read_desc() into its callers.

Link: https://lore.kernel.org/r/20200120130820.1737-6-huobean@gmail.comReviewed-by: NAlim Akhtar <alim.akhtar@samsung.com>
Reviewed-by: NAsutosh Das <asutoshd@codeaurora.org>
Signed-off-by: NBean Huo <beanhuo@micron.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

ufshcd_get_max_pwr_mode() only need to be called once while booting, take
it out from ufshcd_probe_hba() and inline into ufshcd_device_params_init().

Link: https://lore.kernel.org/r/20200120130820.1737-5-huobean@gmail.comReviewed-by: NStanley Chu <stanley.chu@mediatek.com>
Reviewed-by: NAsutosh Das <asutoshd@codeaurora.org>
Signed-off-by: NBean Huo <beanhuo@micron.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

This patch has two major non-functionality changes:

1. Take scanning host if-statement out from ufshcd_probe_hba(), and move
into a new added function ufshcd_add_lus().  In this new function
ufshcd_add_lus(), the main functionalitis include: ICC initialization, add
well-known LUs, devfreq initialization, UFS bsg probe and scsi host
scan. The reason for this change is that these functionalities only being
called during booting stage flow ufshcd_init()->ufshcd_async_scan(). In the
processes of error handling and power management ufshcd_suspend(),
ufshcd_resume(), ufshcd_probe_hba() being called, but these functionalitis
above metioned are not hit.

2. Move context of initialization of parameters associated with the UFS
device to a new added function ufshcd_device_params_init().  The reason of
this change is that all of these parameters are used by driver, but only
need to be initialized once when booting. Combine them into an integral
function, make them easier maintain.

Link: https://lore.kernel.org/r/20200120130820.1737-4-huobean@gmail.comReviewed-by: NAsutosh Das <asutoshd@codeaurora.org>
Signed-off-by: NBean Huo <beanhuo@micron.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

In consideration of UFS host driver uses parameters of struct ufs_dev_desc,
move its parameters to struct ufs_dev_info, delete struct ufs_dev_desc.

Link: https://lore.kernel.org/r/20200120130820.1737-3-huobean@gmail.comReviewed-by: NBart Van Assche <bvanassche@acm.org>
Reviewed-by: NAsutosh Das <asutoshd@codeaurora.org>
Reviewed-by: NAlim Akhtar <alim.akhtar@samsung.com>
Reviewed-by: NStanley Chu <stanley.chu@mediatek.com>
Signed-off-by: NBean Huo <beanhuo@micron.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

A non-zero error value likely being returned by ufshcd_scsi_add_wlus() in
case of failure of adding the WLs, but ufshcd_probe_hba() doesn't use this
value, and doesn't report this failure to upper caller.  This patch is to
fix this issue.

Fixes: 2a8fa600 ("ufs: manually add well known logical units")
Link: https://lore.kernel.org/r/20200120130820.1737-2-huobean@gmail.comReviewed-by: NAsutosh Das <asutoshd@codeaurora.org>
Reviewed-by: NAlim Akhtar <alim.akhtar@samsung.com>
Reviewed-by: NStanley Chu <stanley.chu@mediatek.com>
Signed-off-by: NBean Huo <beanhuo@micron.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

In MediaTek Chipsets, UniPro link and ufshci can enter proprietary
low-power mode while link is in hibern8 state.

Link: https://lore.kernel.org/r/20200117035108.19699-4-stanley.chu@mediatek.comReviewed-by: NAlim Akhtar <alim.akhtar@samsung.com>
Reviewed-by: NAsutosh Das <asutoshd@codeaurora.org>
Signed-off-by: NStanley Chu <stanley.chu@mediatek.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

Export below functions for vendor usage:

int ufshcd_hba_enable(struct ufs_hba *hba);
int ufshcd_make_hba_operational(struct ufs_hba *hba);
int ufshcd_uic_hibern8_exit(struct ufs_hba *hba);

Link: https://lore.kernel.org/r/20200117035108.19699-3-stanley.chu@mediatek.comReviewed-by: NAlim Akhtar <alim.akhtar@samsung.com>
Reviewed-by: NAsutosh Das <asutoshd@codeaurora.org>
Signed-off-by: NStanley Chu <stanley.chu@mediatek.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

Add dbg_register_dump variant vendor implementation in MediaTek UFS driver.

Link: https://lore.kernel.org/r/20200117035108.19699-2-stanley.chu@mediatek.comReviewed-by: NAlim Akhtar <alim.akhtar@samsung.com>
Signed-off-by: NStanley Chu <stanley.chu@mediatek.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

Add vendor-specific variant callback "apply_dev_quirks" to MediaTek UFS
driver.

Cc: Alim Akhtar <alim.akhtar@samsung.com>
Cc: Asutosh Das <asutoshd@codeaurora.org>
Cc: Avri Altman <avri.altman@wdc.com>
Cc: Bart Van Assche <bvanassche@acm.org>
Cc: Bean Huo <beanhuo@micron.com>
Cc: Can Guo <cang@codeaurora.org>
Cc: Matthias Brugger <matthias.bgg@gmail.com>
Link: https://lore.kernel.org/r/1578726707-6596-3-git-send-email-stanley.chu@mediatek.comReviewed-by: NAvri Altman <avri.altman@wdc.com>
Reviewed-by: NBean Huo <beanhuo@micron.com>
Signed-off-by: NStanley Chu <stanley.chu@mediatek.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

Pass UFS device information to vendor-specific variant callback
"apply_dev_quirks" because some platform vendors need to know such
information to apply special handling or quirks in specific devices.

At the same time, modify existing vendor implementations according to the
new interface for those vendor drivers which will be built-in or built as a
module alone with UFS core driver.

[mkp: clarified commit desc]

Cc: Alim Akhtar <alim.akhtar@samsung.com>
Cc: Asutosh Das <asutoshd@codeaurora.org>
Cc: Avri Altman <avri.altman@wdc.com>
Cc: Bart Van Assche <bvanassche@acm.org>
Cc: Bean Huo <beanhuo@micron.com>
Cc: Can Guo <cang@codeaurora.org>
Cc: Matthias Brugger <matthias.bgg@gmail.com>
Link: https://lore.kernel.org/r/1578726707-6596-2-git-send-email-stanley.chu@mediatek.comReviewed-by: NAvri Altman <avri.altman@wdc.com>
Reviewed-by: NBean Huo <beanhuo@micron.com>
Signed-off-by: NStanley Chu <stanley.chu@mediatek.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

Remove "errors" word in output string by ufshcd_print_err_hist() since not
all printed targets are "errors". Sometimes they are just "events".

In addition, all events which can be treated as "errors" already have "err"
or "fail" words in their names.

Cc: Alim Akhtar <alim.akhtar@samsung.com>
Cc: Asutosh Das <asutoshd@codeaurora.org>
Cc: Avri Altman <avri.altman@wdc.com>
Cc: Bart Van Assche <bvanassche@acm.org>
Cc: Bean Huo <beanhuo@micron.com>
Cc: Can Guo <cang@codeaurora.org>
Cc: Matthias Brugger <matthias.bgg@gmail.com>
Link: https://lore.kernel.org/r/1578147968-30938-4-git-send-email-stanley.chu@mediatek.comReviewed-by: NBean Huo <beanhuo@micron.com>
Signed-off-by: NStanley Chu <stanley.chu@mediatek.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

Device reset history shall be also added for vendor's device reset variant
operation implementation.

Cc: Alim Akhtar <alim.akhtar@samsung.com>
Cc: Asutosh Das <asutoshd@codeaurora.org>
Cc: Avri Altman <avri.altman@wdc.com>
Cc: Bart Van Assche <bvanassche@acm.org>
Cc: Bean Huo <beanhuo@micron.com>
Cc: Can Guo <cang@codeaurora.org>
Cc: Matthias Brugger <matthias.bgg@gmail.com>
Link: https://lore.kernel.org/r/1578147968-30938-3-git-send-email-stanley.chu@mediatek.comReviewed-by: NBean Huo <beanhuo@micron.com>
Reviewed-by: NAsutosh Das <asutoshd@codeaurora.org>
Signed-off-by: NStanley Chu <stanley.chu@mediatek.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

Currently checking if an error history element is empty or not is by its
"value". In most cases, value is error code.

However this checking is not correct because some errors or events do not
specify any values in error history so values remain as 0, and this will
lead to incorrect empty checking.

Fix it by checking "timestamp" instead of "value" because timestamp will be
always assigned for all history elements

Cc: Alim Akhtar <alim.akhtar@samsung.com>
Cc: Asutosh Das <asutoshd@codeaurora.org>
Cc: Avri Altman <avri.altman@wdc.com>
Cc: Bart Van Assche <bvanassche@acm.org>
Cc: Bean Huo <beanhuo@micron.com>
Cc: Can Guo <cang@codeaurora.org>
Cc: Matthias Brugger <matthias.bgg@gmail.com>
Link: https://lore.kernel.org/r/1578147968-30938-2-git-send-email-stanley.chu@mediatek.comReviewed-by: NBean Huo <beanhuo@micron.com>
Signed-off-by: NStanley Chu <stanley.chu@mediatek.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

Enable clk-gating with customized delayed timer value in MediaTek Chipsets.

Cc: Alim Akhtar <alim.akhtar@samsung.com>
Cc: Avri Altman <avri.altman@wdc.com>
Cc: Bart Van Assche <bvanassche@acm.org>
Cc: Bean Huo <beanhuo@micron.com>
Cc: Can Guo <cang@codeaurora.org>
Cc: Florian Fainelli <f.fainelli@gmail.com>
Cc: Matthias Brugger <matthias.bgg@gmail.com>
Link: https://lore.kernel.org/r/1577683950-1702-7-git-send-email-stanley.chu@mediatek.comReviewed-by: NAlim Akhtar <alim.akhtar@samsung.com>
Signed-off-by: NStanley Chu <stanley.chu@mediatek.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

Configure customized auto-hibern8 timer in MediaTek Chipsets.

Cc: Alim Akhtar <alim.akhtar@samsung.com>
Cc: Avri Altman <avri.altman@wdc.com>
Cc: Bart Van Assche <bvanassche@acm.org>
Cc: Bean Huo <beanhuo@micron.com>
Cc: Can Guo <cang@codeaurora.org>
Cc: Florian Fainelli <f.fainelli@gmail.com>
Cc: Matthias Brugger <matthias.bgg@gmail.com>
Link: https://lore.kernel.org/r/1577683950-1702-6-git-send-email-stanley.chu@mediatek.comReviewed-by: NAlim Akhtar <alim.akhtar@samsung.com>
Signed-off-by: NStanley Chu <stanley.chu@mediatek.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

Export ufshcd_auto_hibern8_update to allow vendors to use common interface
to customize auto-hibernate timer.

Cc: Alim Akhtar <alim.akhtar@samsung.com>
Cc: Avri Altman <avri.altman@wdc.com>
Cc: Bart Van Assche <bvanassche@acm.org>
Cc: Bean Huo <beanhuo@micron.com>
Cc: Can Guo <cang@codeaurora.org>
Cc: Florian Fainelli <f.fainelli@gmail.com>
Cc: Matthias Brugger <matthias.bgg@gmail.com>
Link: https://lore.kernel.org/r/1577683950-1702-5-git-send-email-stanley.chu@mediatek.comReviewed-by: NAsutosh Das <asutoshd@codeaurora.org>
Reviewed-by: NAlim Akhtar <alim.akhtar@samsung.com>
Signed-off-by: NStanley Chu <stanley.chu@mediatek.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

Introduce reference clock control in MediaTek Chipset in order to disable
it if it is not necessary by UFS device to save system power.

Currently reference clock can be disabled during system suspend, runtime
suspend and clock-gating after link enters hibernate state.

Cc: Alim Akhtar <alim.akhtar@samsung.com>
Cc: Avri Altman <avri.altman@wdc.com>
Cc: Bart Van Assche <bvanassche@acm.org>
Cc: Bean Huo <beanhuo@micron.com>
Cc: Can Guo <cang@codeaurora.org>
Cc: Florian Fainelli <f.fainelli@gmail.com>
Cc: Matthias Brugger <matthias.bgg@gmail.com>
Link: https://lore.kernel.org/r/1577683950-1702-4-git-send-email-stanley.chu@mediatek.comReviewed-by: NAlim Akhtar <alim.akhtar@samsung.com>
Signed-off-by: NStanley Chu <stanley.chu@mediatek.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

Add device reset vops implementation in MediaTek UFS driver.

Cc: Alim Akhtar <alim.akhtar@samsung.com>
Cc: Avri Altman <avri.altman@wdc.com>
Cc: Bart Van Assche <bvanassche@acm.org>
Cc: Bean Huo <beanhuo@micron.com>
Cc: Can Guo <cang@codeaurora.org>
Cc: Florian Fainelli <f.fainelli@gmail.com>
Cc: Matthias Brugger <matthias.bgg@gmail.com>
Link: https://lore.kernel.org/r/1577683950-1702-3-git-send-email-stanley.chu@mediatek.comReviewed-by: NAvri Altman <avri.altman@wdc.com>
Signed-off-by: NStanley Chu <stanley.chu@mediatek.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

This patch corrects the SPDX License Identifier style in header file
related to UFS Host Controller. It assigns explicit block comment to the
SPDX License Identifier.

Changes made by using a script provided by Joe Perches here:
https://lkml.org/lkml/2019/2/7/46.

Link: https://lore.kernel.org/r/5ca6287665fe52d8f40062e0eab8561d2b7a5b40.1577511720.git.nishadkamdar@gmail.comSuggested-by: NJoe Perches <joe@perches.com>
Signed-off-by: NNishad Kamdar <nishadkamdar@gmail.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

The UFS SCSI timeout handler was needed to compensate that
ufshcd_queuecommand() could return SCSI_MLQUEUE_HOST_BUSY for a long
time. Commit a276c19e3e98 ("scsi: ufs: Avoid busy-waiting by eliminating
tag conflicts") fixed this so the timeout handler is no longer necessary.

See also commit f550c65b ("scsi: ufs: implement scsi host timeout handler").

Cc: Bean Huo <beanhuo@micron.com>
Cc: Can Guo <cang@codeaurora.org>
Cc: Avri Altman <avri.altman@wdc.com>
Cc: Stanley Chu <stanley.chu@mediatek.com>
Cc: Tomas Winkler <tomas.winkler@intel.com>
Link: https://lore.kernel.org/r/20191224220248.30138-7-bvanassche@acm.orgReviewed-by: NCan Guo <cang@codeaurora.org>
Reviewed-by: NAlim Akhtar <alim.akhtar@samsung.com>
Signed-off-by: NBart Van Assche <bvanassche@acm.org>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

Starting execution of a command before tracing a command may cause the
completion handler to free data while it is being traced. Fix this race by
tracing a command before it is submitted.

Cc: Bean Huo <beanhuo@micron.com>
Cc: Can Guo <cang@codeaurora.org>
Cc: Avri Altman <avri.altman@wdc.com>
Cc: Stanley Chu <stanley.chu@mediatek.com>
Cc: Tomas Winkler <tomas.winkler@intel.com>
Link: https://lore.kernel.org/r/20191224220248.30138-5-bvanassche@acm.orgReviewed-by: NAlim Akhtar <alim.akhtar@samsung.com>
Signed-off-by: NBart Van Assche <bvanassche@acm.org>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

Since the lrbp->cmd expression occurs multiple times, introduce a new local
variable to hold that pointer. This patch does not change any
functionality.

Cc: Bean Huo <beanhuo@micron.com>
Cc: Can Guo <cang@codeaurora.org>
Cc: Avri Altman <avri.altman@wdc.com>
Cc: Stanley Chu <stanley.chu@mediatek.com>
Cc: Tomas Winkler <tomas.winkler@intel.com>
Link: https://lore.kernel.org/r/20191224220248.30138-4-bvanassche@acm.orgReviewed-by: NStanley Chu <stanley.chu@mediatek.com>
Reviewed-by: NCan Guo <cang@codeaurora.org>
Signed-off-by: NBart Van Assche <bvanassche@acm.org>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

Since the lrbp->cmd expression occurs multiple times, introduce a new local
variable to hold that pointer. This patch does not change any
functionality.

Cc: Bean Huo <beanhuo@micron.com>
Cc: Can Guo <cang@codeaurora.org>
Cc: Avri Altman <avri.altman@wdc.com>
Cc: Stanley Chu <stanley.chu@mediatek.com>
Cc: Tomas Winkler <tomas.winkler@intel.com>
Link: https://lore.kernel.org/r/20191224220248.30138-3-bvanassche@acm.orgReviewed-by: NStanley Chu <stanley.chu@mediatek.com>
Reviewed-by: NCan Guo <cang@codeaurora.org>
Reviewed-by: NAlim Akhtar <alim.akhtar@samsung.com>
Signed-off-by: NBart Van Assche <bvanassche@acm.org>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

Remove a space that occurs after a tab.

Cc: Bean Huo <beanhuo@micron.com>
Cc: Can Guo <cang@codeaurora.org>
Cc: Avri Altman <avri.altman@wdc.com>
Cc: Stanley Chu <stanley.chu@mediatek.com>
Cc: Tomas Winkler <tomas.winkler@intel.com>
Link: https://lore.kernel.org/r/20191224220248.30138-2-bvanassche@acm.orgReviewed-by: NStanley Chu <stanley.chu@mediatek.com>
Reviewed-by: NCan Guo <cang@codeaurora.org>
Reviewed-by: NAlim Akhar <alim.akhtar@samsung.com>
Signed-off-by: NBart Van Assche <bvanassche@acm.org>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

We already have ufshcd_vops_dbg_register_dump() thus all
"hba->vops->dbg_register_dump" references can be replaced by it.

Link: https://lore.kernel.org/r/1577192466-20762-3-git-send-email-stanley.chu@mediatek.comReviewed-by: NBart Van Assche <bvanassche@acm.org>
Reviewed-by: NCan Guo <cang@codeaurora.org>
Reviewed-by: NAlim Akhtar <alim.akhtar@samsung.com>
Signed-off-by: NStanley Chu <stanley.chu@mediatek.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

Currently UFS driver has ufshcd_scsi_block_requests() with reference
counter mechanism to avoid possible racing of blocking and unblocking
requests flow. Unify all users in UFS driver to use the same function.

Link: https://lore.kernel.org/r/1577192466-20762-2-git-send-email-stanley.chu@mediatek.comReviewed-by: NCan Guo <cang@codeaurora.org>
Reviewed-by: NBart Van Assche <bvanassche@acm.org>
Reviewed-by: NAlim Akhtar <alim.akhtar@samsung.com>
Signed-off-by: NStanley Chu <stanley.chu@mediatek.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

Attach power off hook to Cadence UFS driver.

Link: https://lore.kernel.org/r/1576491432-631-1-git-send-email-sheebab@cadence.comReviewed-by: NAvri Altman <avri.altman@wdc.com>
Reviewed-by: NAlim Akhtar <alim.akhtar@samsung.com>
Signed-off-by: NSheeba B <sheebab@cadence.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

Similar to suspend, ufshcd interrupt can be disabled since there won't be
any host controller transaction expected till clocks ungated.

Link: https://lore.kernel.org/r/1575721321-8071-3-git-send-email-stanley.chu@mediatek.comReviewed-by: NAsutosh Das <asutoshd@codeaurora.org>
Reviewed-by: NAvri Altman <avri.altman@wdc.com>
Signed-off-by: NStanley Chu <stanley.chu@mediatek.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

During suspend flow, interrupt shall be disabled before disabling clocks to
avoid potential system hang due to accessing host registers after host
clocks are disabled.

For example, if an interrupt comes with IRQF_IRQPOLL flag configured with
the misrouted interrupt recovery feature enabled, ufshcd ISR may be
triggered even if nothing shall be done for UFS. In this case, system hang
may happen if UFS interrupt status register is accessed with host clocks
disabled.

Link: https://lore.kernel.org/r/1575721321-8071-2-git-send-email-stanley.chu@mediatek.comReviewed-by: NAvri Altman <avri.altman@wdc.com>
Signed-off-by: NStanley Chu <stanley.chu@mediatek.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

We know that "check_for_bkops" is non-zero on this side of the || because
it was checked on the other side.

Link: https://lore.kernel.org/r/20191213104935.wgpq2epaz6zh5zus@kili.mountainReviewed-by: NBart Van Assche <bvanassche@acm.org>
Reviewed-by: NAvri Altman <avri.altman@wdc.com>
Signed-off-by: NDan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

We introduced a few new error paths, but we can't return directly, we first
have to unlock "hba->clk_scaling_lock" first.

Fixes: a276c19e3e98 ("scsi: ufs: Avoid busy-waiting by eliminating tag conflicts")
Link: https://lore.kernel.org/r/20191213104828.7i64cpoof26rc4fw@kili.mountainReviewed-by: NBart Van Assche <bvanassche@acm.org>
Signed-off-by: NDan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

Backup L4 attributes duirng manual hibern8 entry and restore the L4
attributes on manual hibern8 exit as per JESD220C.

Link: https://lore.kernel.org/r/1575606303-10917-1-git-send-email-sheebab@cadence.comReviewed-by: NAlim Akhtar <alim.akhtar@samsung.com>
Tested-by: NVignesh Raghavendra <vigneshr@ti.com>
Signed-off-by: NSheeba B <sheebab@cadence.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

Since ufshcd irq resource is allocated with the device resource management
aware IRQ request implementation, we don't really need to free up irq
during suspend, disabling it during suspend and reenabling it during resume
should be good enough.

Link: https://lore.kernel.org/r/0101016ed3d69793-22918f99-23bf-495d-8a36-a9c108d1cbce-000000@us-west-2.amazonses.comReviewed-by: NStanley Chu <stanley.chu@mediatek.com>
Signed-off-by: NCan Guo <cang@codeaurora.org>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>