A sufficiently-large number of USB serial devices causes a reference leak
when /proc/tty/drivers/usbserial is read.
Signed-Off-By: NMatthias Urlichs <smurf@smurf.noris.de>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

* 'audit.b28' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/audit-current:
  [PATCH] audit: AUDIT_PERM support
  [PATCH] audit: more syscall classes added
  [PATCH] syscall classes hookup for ppc and s390
  [PATCH] update audit rule change messages
  [PATCH] sanity check audit_buffer
  [PATCH] fix ppid bug in 2.6.18 kernel

* master.kernel.org:/pub/scm/linux/kernel/git/gregkh/usb-2.6:
  usbtouchscreen: fix ITM data reading
  USB: New device ID for ftdi_sio usb serial driver
  USB: Support for USB20SVGA-WH & USB20SVGA-DG
  USB: hid-core.c: fix duplicate USB_DEVICE_ID_GTCO_404

add support for AUDIT_PERM predicate
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

Make the audit message for implicit rule removal more informative.
Make the rule update message consistent with other messages.
Signed-off-by: NAmy Griffis <amy.griffis@hp.com>
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

Add sanity checks for NULL audit_buffer consistent with other
audit_log* routines.
Signed-off-by: NAmy Griffis <amy.griffis@hp.com>
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

Hello,

During some troubleshooting, I found that ppid was accidentally omitted from
the legacy rule section. This resulted in EINVAL for any rule with ppid sent
with AUDIT_ADD.
Signed-off-by: NSteve Grubb <sgrubb@redhat.com>
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

* master.kernel.org:/home/rmk/linux-2.6-mmc:
  [MMC] Always use a sector size of 512 bytes
  [MMC] Cleanup 385e3227
  [ARM] 3751/1: i.MX/MX1 SD/MMC use 512 bytes request for SCR read
  [MMC] Fix SD timeout calculation
  [MMC] constify mmc_host_ops

* master.kernel.org:/home/rmk/linux-2.6-arm:
  [ARM] 3778/1: S3C24XX: remove changelogs from include/asm-arm/arch-s3c2410 [simtec]
  [ARM] 3783/1: S3C2412: fix IRQ_EINT0 to IRQ_EINT3 handling
  [ARM] 3779/1: S3C24XX: remove changelogs from include/asm-arm/arch-s3c2410 [left]
  [ARM] 3777/1: S3C24XX:  remove changelogs from include/asm-arm/arch-s3c2410 [regs-*.h]
  [ARM] 3776/1: S3C24XX: remove changelogs from include/asm-arm/arch-s3c2410
  [ARM] 3775/1: S3C24XX: do not add same sysdev_driver to two classes
  [ARM] 3774/1: S3C24XX: SMDK2413 has two machine IDs
  [ARM] 3773/1: Add the HWCAP_VFP bit for the ARM926 CPUs
  [ARM] 3772/1: Fix compilation error in mach-ixp4xx/nslu2*
  [ARM] 3767/1: S3C24XX: remove changelog comments from arch/arm/mach-s3c2410
  [ARM] 3766/1: Fix typo in ARM _raw_read_trylock

* 'upstream-linus' of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/netdev-2.6:
  [PATCH] Fix dm9000 release_resource

* 'upstream-linus' of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/libata-dev:
  [PATCH] ata_piix: add map 01b for ICH7M
  [libata] sata_mv: errata check buglet fix

There are two changes here.  The first reverses the broken PCI_DEVICE
conversion back to the old format.  The second adds a missing PCI ID so
you can actually boot 2.6.18 on 2 month old VIA motherboards (right now
only 2.6.18-mm works).

CC'd to Jeff to check the PCI ident but its a) in several distro kernels
and b) in 2.6.18-mm [twice ??]
Signed-off-by: NAlan Cox <alan@redhat.com>
Cc: Jeff Garzik <jeff@garzik.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

dm9000_release_board calls release_resource with the platform resource
instead of the requested resource:

db->addr_res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
db->addr_req = request_mem_region(db->addr_res->start, i, pdev->name);

dm9000_release_board:

if (db->addr_res != NULL) {
release_resource(db->addr_res);
kfree(db->addr_req);

With this behavior the kernel will crash on the second removal. The
attached patch fix this problem.
Signed-off-by: NDirk Opfer <Dirk@Opfer-Online.de>
Signed-off-by: NJeff Garzik <jeff@garzik.org>

Although the document says otherwise, some ich7m uses map 01b.  This
patch adds separate map DB for ICH7M and adds map entry for 01b.

This was spotted on an ASUS laptop by Jonathan Dieter.
Signed-off-by: NTejun Heo <htejun@gmail.com>
Cc: Jonathan Dieter <jdieter@gmail.com>
Signed-off-by: NJeff Garzik <jeff@garzik.org>

Fix a buglet; the errata check below this code is assuming the value in
the sstatus variable is what was pulled out of the SCR_STATUS register.
However, the status checks in the timeout loop clobber everything
but the first 4 bits of sstatus, so the errata checks are invalid.

This patch changes it to not clobber SStatus.
Signed-off-by: NAndres Salomon <dilinger@debian.org>
Signed-off-by: NJeff Garzik <jeff@garzik.org>

Patch from Ben Dooks

Remove changelog entries from include/asm-arm/arch-s3c2410
for all simtec .h files  as these are irrelevant with
version control.
Signed-off-by: NBen Dooks <ben-linux@fluff.org>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

Patch from Ben Dooks

The IRQ_EINT0 through IRQ_EINT3 handling has changed
on the S3C2412 from the previous SoCs in the range,
and thus we need to add code to handle this.

The changes come about due to these IRQs being
displayed in two different registers, and needing to
be acked and masked in both.
Signed-off-by: NBen Dooks <ben-linux@fluff.org>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

Patch from Ben Dooks

Remove the last of the hangelogs from
include/asm-arm/arch-s3c2410, as this information
is available from the revision control system
Signed-off-by: NBen Dooks <ben-linux@fluff.org>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

Patch from Ben Dooks

Remove changelog entries from include/asm-arm/arch-s3c2410
for all regs-*.h as these are irrelevant with version control
Signed-off-by: NBen Dooks <ben-linux@fluff.org>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

Patch from Ben Dooks

Remove changelog entries from include/asm-arm/arch-s3c2410
as these are irrelevant with version control
Signed-off-by: NBen Dooks <ben-linux@fluff.org>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

Patch from Ben Dooks

The s3c244x-irq.c code makes the mistake of adding
the same drive to two different sys-classes. This
causes the class lists to become corrupted and the
suspend code to OOPS.
Signed-off-by: NBen Dooks <ben-linux@fluff.org>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

The sn_cpu_init() is required for cpu initialization on SN platforms.
Change __init to __cpuinit so that the function is not freed with init code/data.
Signed-off-by: NJack Steiner <steiner@sgi.com>
Signed-off-by: NTony Luck <tony.luck@intel.com>

The SN PROM uses the register stack in the slave loop. The contents
must be preserved for the OS to return to the slave loop via offlining
a cpu or for kexec. A 'flushrs" is needed to force the stack to be written
to memory prior to changing bspstore.
Signed-off-by: NJack Steiner <steiner@sgi.com>
Signed-off-by: NTony Luck <tony.luck@intel.com>

The syscalls set/get_robust_list must not be wired up until
futex_atomic_cmpxchg_inatomic is implemented.  Otherwise the kernel will
hang in handle_futex_death.
Signed-off-by: NAndreas Schwab <schwab@suse.de>
Signed-off-by: NTony Luck <tony.luck@intel.com>

Fix a bug in sys_perfmonctl() whereby it was not correctly
decrementing the file descriptor reference count.
Signed-off-by: Nstephane eranian <eranian@hpl.hp.com>
Signed-off-by: NTony Luck <tony.luck@intel.com>

The logic in nfs_direct_read_schedule and nfs_direct_write_schedule can
allow data->npages to be one larger than rpages.  This causes a page
pointer to be written beyond the end of the pagevec in nfs_read_data (or
nfs_write_data).

Fix this by making nfs_(read|write)_alloc() calculate the size of the
pagevec array, and initialise data->npages.

Also get rid of the redundant argument to nfs_commit_alloc().
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
Cc: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

If a CPU faults this page into pagetables after invalidate_mapping_pages()
checked page_mapped(), invalidate_complete_page() will still proceed to remove
the page from pagecache.  This leaves the page-faulting process with a
detached page.  If it was MAP_SHARED then file data loss will ensue.

Fix that up by checking the page's refcount after taking tree_lock.

Cc: Nick Piggin <nickpiggin@yahoo.com.au>
Cc: Hugh Dickins <hugh@veritas.com>
Cc: <stable@kernel.org>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

It has been reported that ext3_getblk() is not doing the right thing and
triggering following WARN():

BUG: warning at fs/ext3/inode.c:1016/ext3_getblk()
 <c01c5140> ext3_getblk+0x98/0x2a6  <c03b2806> md_wakeup_thread+0x26/0x2a
 <c01c536d> ext3_bread+0x1f/0x88  <c01cedf9> ext3_quota_read+0x136/0x1ae
 <c018b683> v1_read_dqblk+0x61/0xac  <c0188f32> dquot_acquire+0xf6/0x107
 <c01ceaba> ext3_acquire_dquot+0x46/0x68  <c01897d4> dqget+0x155/0x1e7
 <c018a97b> dquot_transfer+0x3e0/0x3e9  <c016fe52> dput+0x23/0x13e
 <c01c7986> ext3_setattr+0xc3/0x240  <c0120f66> current_fs_time+0x52/0x6a
 <c017320e> notify_change+0x2bd/0x30d  <c0159246> chown_common+0x9c/0xc5
 <c02a222c> strncpy_from_user+0x3b/0x68  <c0167fe6> do_path_lookup+0xdf/0x266
 <c016841b> __user_walk_fd+0x44/0x5a  <c01592b9> sys_chown+0x4a/0x55
 <c015a43c> vfs_write+0xe7/0x13c  <c01695d4> sys_mkdir+0x1f/0x23
 <c0102a97> syscall_call+0x7/0xb

Looking at the code, it looks like it's not handle HOLE correctly.  It ends
up returning -EIO.  Here is the patch to fix it.

If we really want to be paranoid, we can allow return values 0 (HOLE), 1
(we asked for one block) and return -EIO for more than 1 block.  But I
really don't see a reason for doing it - all we need is the block# here.
(doesn't matter how many blocks are mapped).

ext3_get_blocks_handle() returns number of blocks it mapped.  It returns 0
in case of HOLE.  ext3_getblk() should handle HOLE properly (currently its
dumping warning stack and returning -EIO).
Signed-off-by: NBadari Pulavarty <pbadari@us.ibm.com>
Acked-by: NMingming Cao <cmm@us.ibm.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

New SiS south bridge device ID is 0x966.

Next coming product will be 0x968. (Will be released in Q4, this year)

We don't make any updates to the IDE controller.
Signed-off-by: NDavid Wang <touch@sis.com>
Cc: Jeff Garzik <jeff@garzik.org>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Not that it passes allmodconfig without it...
Signed-off-by: NAlexey Dobriyan <adobriyan@gmail.com>
Cc: Paul Mundt <lethal@linux-sh.org>
Cc: Kazumoto Kojima <kkojima@rr.iij4u.or.jp>
Cc: Mark Haverkamp <markh@osdl.org>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Sergey Vlasov reported that his "FUJITSU MCC3064AP, ATAPI OPTICAL drive"
pops up as UNKNOWN in /proc/ide/*/media .

Closes #4145.
Signed-off-by: NAlexey Dobriyan <adobriyan@gmail.com>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

The current implementation of futex_lock_pi returns -ERESTART_RESTARTBLOCK
in case that the lock operation has been interrupted by a signal.  This
results in a return of -EINTR to userspace in case there is an handler for
the signal.  This is wrong, because userspace expects that the lock
function does not return in any case of signal delivery.

This was not caught by my insufficient test case, but triggered a nasty
userspace problem in an high load application scenario.  Unfortunately also
glibc does not check for this invalid return value.

Using -ERSTARTNOINTR makes sure, that the interrupted syscall is restarted.
 The restart block related code can be safely removed, as the possible
timeout argument is an absolute time value.
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
Acked-by: NIngo Molnar <mingo@elte.hu>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

This prevents cross-region mappings on IA64 and SPARC which could lead
to system crash.  They were correctly trapped for normal mmap() calls,
but not for the kernel internal calls generated by executable loading.

This code just moves the architecture-specific cross-region checks into
an arch-specific "arch_mmap_check()" macro, and defines that for the
architectures that needed it (ia64, sparc and sparc64).

Architectures that don't have any special requirements can just ignore
the new cross-region check, since the mmap() code will just notice on
its own when the macro isn't defined.
Signed-off-by: NPavel Emelianov <xemul@openvz.org>
Signed-off-by: NKirill Korotaev <dev@openvz.org>
Acked-by: NDavid Miller <davem@davemloft.net>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
[ Cleaned up to not affect architectures that don't need it ]
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

From: Kai Lindhom <megantti@gmail.com>
Signed-off-by: NDaniel Ritz <daniel.ritz@gmx.ch>
Acked-by: NDmitry Torokhov <dtor@mail.ru>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

The patch adds a new device ID for the Gamma Scout Geiger counter
device.
Signed-off-by: NRalf Schlatterbeck <rsc@runtux.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

This patch is support USB20SVGA-WH & USB20SVGA-DG of the sisusb device.
As for this device, Device ID is different according to the color of the
product.  A blue device is supported. However, a green, white device is
not supported.

http://www.lubic.jp/uv_method.html ( Japanese only ) .

Green, white USB20SVGA comes to work by applying the patch .
And, it  be able to use three USB20SVGA( Blue , Green , White ).
Signed-off-by: NNobuhiro Iwamatsu <hemamu@t-base.ne.jp>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

On Fri, Sep 01, 2006 at 01:58:18AM -0700, Andrew Morton wrote:
>...
> Changes since 2.6.18-rc4-mm3:
>...
> +gregkh-usb-hid-core.c-adds-all-gtco-calcomp-digitizers-and-interwrite-school-products-to-blacklist.patch
>...
>  USB tree updates.
>...

The GNU C compiler spotted the following bug:

<--  snip  -->

...
  CC      drivers/usb/input/hid-core.o
/home/bunk/linux/kernel-2.6/linux-2.6.18-rc5-mm1/drivers/usb/input/hid-core.c:1446:1: warning: "USB_DEVICE_ID_GTCO_404" redefined
/home/bunk/linux/kernel-2.6/linux-2.6.18-rc5-mm1/drivers/usb/input/hid-core.c:1445:1: warning: this is the location of the previous definition
...

<--  snip  -->

This patch fixes this cut'n'paste error.
Signed-off-by: NAdrian Bunk <bunk@stusta.de>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Both MMC and SD specifications specify (although a bit unclearly in
the MMC case) that a sector size of 512 bytes must always be
supported by the card.

Cards can report larger "native" size than this, and cards >= 2 GB
even must do so. Most other readers use 512 bytes even for these
cards. We should do the same to be compatible.
Signed-off-by: NPierre Ossman <drzeus@drzeus.cx>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>