Some of the places using this want the newline, but not all,
so remove the newline from it and generate it in the debugfs
files where it's desired.

The effect of this is not printing double newlines in debug
log messages.

Change-Id: Ia59b0abbef16b6783fcabc095c5fde16bd047a26
Signed-off-by: NJohannes Berg <johannes.berg@intel.com>
Signed-off-by: NLuca Coelho <luciano.coelho@intel.com>

There's no need for this to be exposed outside of the tx.c
file, make it static.

Change-Id: I41d40008311b108d0578bd2ec73c5477e700a839
Signed-off-by: NJohannes Berg <johannes.berg@intel.com>
Signed-off-by: NLuca Coelho <luciano.coelho@intel.com>

Start supporting API version 53 for 22000 series.

Change-Id: I5725e46394f3f53c3069723fd513cc53c7df383d
Signed-off-by: NLuca Coelho <luciano.coelho@intel.com>

This is used to initialize the default value, but refers back
to the value itself, essentially leading to a
	val = val
assignment at init time ... that's useless, remove it and use
_NODEF.

Change-Id: I725923016563c34ce2fa057bf7c12984e1041c49
Signed-off-by: NJohannes Berg <johannes.berg@intel.com>
Signed-off-by: NLuca Coelho <luciano.coelho@intel.com>

Now that YoYo is more mature, we can enable it by default, so we
collect data in the new way.

Change-Id: Ic1a147f935286b085ca8bdb248a7493b7c6341ea
Signed-off-by: NLuca Coelho <luciano.coelho@intel.com>

The FW changed the maximum number of scan offload profiles to 8 in new
APIs.  Support it by changing the scan_offload_profile_cfg struct to be
more dynamic, so we can reuse most of the code and only change size of
the profiles array.

Change-Id: I65210cf541af46e2675a8c764d5871f7f5b070d6
Signed-off-by: NTova Mussai <tova.mussai@intel.com>
Signed-off-by: NLuca Coelho <luciano.coelho@intel.com>

When we have an assert during D3 we want to dump the internal
buffer memory even if are we working in DRAM debug mode.  We should not
block dumping it.

Change-Id: I69aad2d4904c4f8bb653c61e8781a2e07780054f
Signed-off-by: NRotem Saado <rotem.saado@intel.com>
Signed-off-by: NLuca Coelho <luciano.coelho@intel.com>

We don't support the FPGA versions of this card combination anymore.
Remove the cfg mangling that tries to load it and all the relevant
structures.

Change-Id: I190652101afcab682cfba873d062992f11efca32
Signed-off-by: NLuca Coelho <luciano.coelho@intel.com>

We don't support QnJ HR STEP A anymore.  Remove the structures we used
for it.

Change-Id: I0dfd88232bdc8ff2dd9c4368b8ed9a0c40c86bc8
Signed-off-by: NLuca Coelho <luciano.coelho@intel.com>

A couple of SoCs, which can be recognized by PCI device IDs 0xA0F0 and
0x43F0, need a longer wait for the xtal to stabilize.  To handle this,
add a new trans_cfg structure for Qu devices with a larger
xtal_latency value and apply them to the devices recognized by these
IDs.  Also add a flag that allows us to inform the FW that the low
latency xtal should be used.

Change-Id: I8a14c6af45ea14d8e7f1ef38a589158f38d0c0ea
Signed-off-by: NLuca Coelho <luciano.coelho@intel.com>

This new command is mostly backwards compatible, with the exception
that the device_type element was changed into a bitmask.  The device
type bit remains the same (because we only had 0 and 1 anyway), but
when using v1 we can't set any other bits, because that would change
the integer.

Other than that, the struct remains the same and the driver can set
the device_type bit in both cases, but it can only set the low_latency
bit if VER_2 is used.

Change-Id: Ib68d4c821ebcce253b42ed0ea15881fb4e3e01da
Signed-off-by: NLuca Coelho <luciano.coelho@intel.com>

Add support for requesting trigger-based / non trigger-based
measurements.

Change-Id: Ib4d0c471da9c50d9981541a7f5926db384a0f7ce
Signed-off-by: NAvraham Stern <avraham.stern@intel.com>
Signed-off-by: NLuca Coelho <luciano.coelho@intel.com>

Now that we identify the correct cfgs with the new tables for Qu step
C and QuZ with Jf, we can remove the mangling we do later on.

Change-Id: Ic01ce67db147e897ad2424f0e05a70a00d2c620e
Signed-off-by: NLuca Coelho <luciano.coelho@intel.com>

All the QnJ devices have a similar matching to the other Qu devices,
but needs a different configuration.  Convert the QnJ devices to the
new table accordingly.

Change-Id: If236ef3d0da3e605a3379922818f5897e0affd7e
Signed-off-by: NLuca Coelho <luciano.coelho@intel.com>

Add new generic iwl_trans structures for these devices and apply the
correct cfg depending on the device characteristics.

Since we have to match Qu with IWL_CONFIG_ANY, we also need to move
the Hr devices to the new table, but for now we keep matching on PCI
device and subsystem device IDs.

Change-Id: I14e9146a99621ff11ce50bc746a4b88af508fee0
Signed-off-by: NLuca Coelho <luciano.coelho@intel.com>

We need to use different firmware versions for different HW steps with
certain devices.  Prepare for this differentiation by adding HW step
to the new device table.

Change-Id: Ib1afb7b0c89e9dc2d26e6d32ea19e978c17ba1dd
Signed-off-by: NLuca Coelho <luciano.coelho@intel.com>

After the refactoring, a few extern declarations were accidentally
left in the iwl-config.h file.  Remove them

Change-Id: I79745e440ed5a0a90db61b0daaae374ecef09e86
Signed-off-by: NLuca Coelho <luciano.coelho@intel.com>

These values are selected based on the PCI device ID, so the decision
to use them can be made early.  By moving them to the trans_cfg, we
avoid duplicating the large cfg structs for small pieces of
data (sometimes a single boolean).  This will also allow us to make
more decisions based on, for instance, the SoC type in used.

The trans_cfg concept changes a bit, because previously it was used
only to boot the device before reading further characteristics and now
it also contains more data that is associated with the device ID.

Change-Id: Ib71b07ea9e322eb74571dc5e8aa58f17eece5c9c
Signed-off-by: NLuca Coelho <luciano.coelho@intel.com>

We shouldn't do this just for HT/VHT, but be future-proof
and also check for HE.

Change-Id: Icaeff714c00a773681dbfee72558afd1c7121c5d
Signed-off-by: NJohannes Berg <johannes.berg@intel.com>
Signed-off-by: NLuca Coelho <luciano.coelho@intel.com>

The iwl9560_2ac_cfg struct is used for PNJ devices and the
configuration is the same as iwl9260_2ac_cfg, so we can remove the
former to avoid redundancy.

Change-Id: I17ac1802f00bd80006930b922a9fc21df60e3c16
Signed-off-by: NLuca Coelho <luciano.coelho@intel.com>

That closing brace for the switch statement is misplaced, fix it.

Change-Id: I39af135a9e3fc64337d2cced43a70cb48fe3b9c1
Signed-off-by: NJohannes Berg <johannes.berg@intel.com>
Signed-off-by: NLuca Coelho <luciano.coelho@intel.com>

Modify adaptive dwell number of APs override API
Instead of using channel to index mapping, add the adaptive dwell
override parameters as part of the configuration per channel in the scan
request command.

Support 2 different override values and use them as follows:
1. 10 APs for friendly GO channels in p2p scan.
2. 2 APs for social channels in p2p scan.

Change-Id: I3b461108abf2306c3d054099112f2c3afce1cc92
Signed-off-by: NShahar S Matityahu <shahar.s.matityahu@intel.com>
Signed-off-by: NLuca Coelho <luciano.coelho@intel.com>

We'll need this data in the future, pass the values.

Change-Id: Iaeff50716e783f5c0bcea86ca1c93ada1560525e
Signed-off-by: NJohannes Berg <johannes.berg@intel.com>
Signed-off-by: NLuca Coelho <luciano.coelho@intel.com>

Add the read_config32 op to allow dumping the config space when
needed.

Change-Id: Ib2d254a38a4bfb95dcc3d04eec91781827a0c623
Signed-off-by: NLuca Coelho <luciano.coelho@intel.com>

Add a new region type that allows us to dump the PCI config space.
This is mostly the same as dumping a memory region, but reading from
the device's config space instead.

In order to make this generic and independent of the trans type, we
make a function called iwl_dump_ini_config_iter() that calls a new op
in the transport to read its config space.

Change-Id: I15151bddf589f13b0e0a45c28b96bbcd73bcfdeb
Signed-off-by: NLuca Coelho <luciano.coelho@intel.com>

Some devices require longer time to stabilize the power and XTAL.
This is especially true for devices integrated in the SoC.  Add
support for a new firmware API that allows the driver to set the
latency value accordingly.

Change-Id: I6829a46b89e4e701f80a0e4033f4dd41ee44ed12
Signed-off-by: NShahar S Matityahu <shahar.s.matityahu@intel.com>
Signed-off-by: NLuca Coelho <luciano.coelho@intel.com>

Move the AX200 devices to the new table and add the appropriate cfg
struct and strings.
Signed-off-by: NLuca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20200309091348.fdfa5f31b8b1.Idfd28829d9f3820de06d3bba8fa66048b8d0d0b0@changeid

These entries are decided at runtime using the new parameters now, so
they are not needed in the macro that is reused in the configs.
Signed-off-by: NLuca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20200309091348.3387a6c8fdbe.I98284457f26c5695754964b28f0257a7dc7c6b1c@changeid

These devices can now also be fully differentiated by using the new
parameters.  Move them all to the new table format.
Signed-off-by: NLuca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20200309091348.11c65d195677.I8faf50b325282df4892520a3b21fbdedabbb64f0@changeid

All the pu devices can now be differentiated using the new
parameters, so move them all to the new tables accordingly.

This also includes removal of a few deprecated IDs and redundant cfg
structs.
Signed-off-by: NLuca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20200309091348.e7dc61e665f3.I44dcf9195bb8cc9e8c8e3e87182e9185c819a99d@changeid

These devices don't exist anymore, so remove them from the tables.
Signed-off-by: NLuca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20200309091348.fef62aa45887.I302e32b7cfff7da0d920547fae60ad9f2296e052@changeid

The 9260-1x1 device can be differentiated using the PCI device ID.
There is a single occurrence of this device, so continue relying on
the device and subsystem device IDs.

The name of this device was incorrect, so add a new string
specifically for it.
Signed-off-by: NLuca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20200309091348.4d74e1be7cac.Id27bd9c878b73cb771691cbe6082fd40e079b44d@changeid

TH1 devices can now be fully differentiated by using the device
parameters we have (particularly the RF_TYPE).  Start using these
parameters instead of hardcoding to specific subsystem device IDs.

This also fixes the name of one of the TH1 devices that was
erroneously using the 9260 struct and renames 9160 to 9162.
Signed-off-by: NLuca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20200309091348.18d4304b5454.Ib168d186da88393e9ec46f0fca523edb48d9138e@changeid

These devices can be differentiated depending on the RF type and RF
ID.  Change them to use these instead of relying on the subsystem
device IDs.

This also fixes some names that were not including 160MHz (as they
should).
Signed-off-by: NLuca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20200309091348.345de1efb3ec.Ib9221027a955188ea7c1ffca8a45bccd6c1e6a13@changeid

Pu, PnJ and Th devices have different combinations of PCI ID, MAC ID
and RF IDs.  Use these to differentiate them and choose the correct
configuration.

This also includes a change from using soc cfg's for 0x2526
devices (PnJ/Th), which was incorrect.
Signed-off-by: NLuca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20200309091348.602bb33528cf.I3acacb07c69ed063c7f1ca78f2dce9b7b4ef3946@changeid

Devices that also include a GNSS module have different names, so add a
new device option to differentiate them, according to the values we
have in the modules section of the subsystem device ID.

Additionally, convert the two applicable devices to use this value
instead of hardcoded subsystem IDs.
Signed-off-by: NLuca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20200309091348.1f958e558d05.I45492bb57cbbeb4cc0ec84313bade4def7377a27@changeid

Add MAC ID, RF ID and the bit that tells us whether the device can
handle 160MHz bandwidth to the device struct.

This allows us to chose the correct structure and string depending on
these parameters.  Do so for all the 0x2526 devices we already moved
to the new table.
Signed-off-by: NLuca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20200309091348.a6bef6ee8fe1.I01f7a6f49aa60d2d61633a8a8b859015681eac5b@changeid

All the 0x2526 devices are now in the new table, so we can start
reusing configurations and adding the strings independently to all of
them, reusing them when possible.
Signed-off-by: NLuca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20200309091348.88e3d47c42a8.I1bd37ae0d0f9f79732f03badf84d7d063993b73e@changeid

Now that we have the strings separate from the rest, we can move the
remaining 0x2526 devices to the new table in preparation to reuse the
configs.
Signed-off-by: NLuca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20200309091348.a7998f8d7507.I4be8776edb8c30416efc184c66f11add5eed06de@changeid

Since snprintf() returns the would-be-output size instead of the
actual output size, the succeeding calls may go beyond the given
buffer limit.  Fix it by replacing with scnprintf().

Cc: Stanislav Yakovlev <stas.yakovlev@gmail.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>
Signed-off-by: NKalle Valo <kvalo@codeaurora.org>