In amdgpu_dm_connector_add_common_modes(), amdgpu_dm_create_common_mode()
is assigned to mode and is passed to drm_mode_probed_add() directly after
that. drm_mode_probed_add() passes &mode->head to list_add_tail(), and
there is a dereference of it in list_add_tail() without recoveries, which
could lead to NULL pointer dereference on failure of
amdgpu_dm_create_common_mode().

Fix this by adding a NULL check of mode.

This bug was found by a static analyzer.

Builds with 'make allyesconfig' show no new warnings,
and our static analyzer no longer warns about this code.

Fixes: e7b07cee ("drm/amd/display: Merge amdgpu_dm_types and amdgpu_dm")
Signed-off-by: NZhou Qingyang <zhou1615@umn.edu>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

In calculate_bandwidth(), the tag free_sclk and free_yclk are reversed,
which could lead to a memory leak of yclk.

Fix this bug by changing the location of free_sclk and free_yclk.

This bug was found by a static analyzer.

Builds with 'make allyesconfig' show no new warnings,
and our static analyzer no longer warns about this code.

Fixes: 2be8989d ("drm/amd/display/dc/calcs/dce_calcs: Move some large variables from the stack to the heap")
Signed-off-by: NZhou Qingyang <zhou1615@umn.edu>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Check IP versions rather than asic types.
Acked-by: NEvan Quan <evan.quan@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Extend secondary function handling for runtime pm beyond audio
to USB and UCSI.
Reviewed-by: NEvan Quan <evan.quan@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Seems more logical to enable runtime pm at the end of
the init sequence so we don't end up entering runtime
suspend before init is finished.
Reviewed-by: NEvan Quan <evan.quan@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

We need to set the APU flag from IP discovery before
we evaluate this code.
Acked-by: NEvan Quan <evan.quan@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Use the IP versions to set the APU flag when necessary.
Reviewed-by: NAaron Liu <aaron.liu@amd.com>
Acked-by: NEvan Quan <evan.quan@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Earlier chips only had two performance levels, but newer
ones potentially had more.  The message is harmless.  Drop the
message to avoid spamming the log.

Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/1874Reviewed-by: NEvan Quan <evan.quan@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[Why]
A porting error resulted in the stream assignment for the link
being retained without being released - a memory leak.

[How]
Fix the porting error by adding back the dc_stream_release() intended
as part of the original patch.

Fixes: 0bb24555 ("drm/amd/display: retain/release at proper places in link_enc assignment")
Signed-off-by: NNicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Reviewed-by: NHarry Wentland <harry.wentland@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[Why]
To help triage issues and coordinate driver/bios release dependency

[How]
Only enable the new Z9 interface when debug option is set, otherwise
treat Z10 only support case as Zstate disallowed.
Tested-by: NDaniel Wheeler <daniel.wheeler@amd.com>
Reviewed-by: NNicholas Kazlauskas <Nicholas.Kazlauskas@amd.com>
Acked-by: NRodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: NEric Yang <Eric.Yang2@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[Why]
psr_feature_enabled flag is dynamically updated, and sometimes when
zstate allow status is determined the flag has not been set to true yet
even on PSR enabled config, lid off/on is such a case, which will result
in zstate disabled even though PSR is supported.

[How]
Check the supported PSR version and the PSR disable status instead.
Tested-by: NDaniel Wheeler <daniel.wheeler@amd.com>
Reviewed-by: NNicholas Kazlauskas <Nicholas.Kazlauskas@amd.com>
Acked-by: NRodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: NEric Yang <Eric.Yang2@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[How & Why]
Disable physym clock when it's not in use.
Tested-by: NDaniel Wheeler <daniel.wheeler@amd.com>
Reviewed-by: NEric Yang <Eric.Yang2@amd.com>
Acked-by: NRodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: NDavid Galiffi <David.Galiffi@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[How & Why]
Updated procedure to match hardware programming guide.
Tested-by: NDaniel Wheeler <daniel.wheeler@amd.com>
Reviewed-by: NEric Yang <Eric.Yang2@amd.com>
Acked-by: NRodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: NDavid Galiffi <David.Galiffi@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[why]
There is a change previously to disallow DM to set dp drive setings when
stream is not present. The logic might not work well with DP PHY
complaince scenario with a PHY test fixture attachment. We need to make
the method allow DP link drive settings changes even without stream
attached to it.

[how]
revert back to previous code in set drive setting function then add an
empty link_resource structure, then assign link resource based on
current link resource if link resource is allocated to the current pipe.
Tested-by: NDaniel Wheeler <daniel.wheeler@amd.com>
Reviewed-by: NWayne Lin <Wayne.Lin@amd.com>
Acked-by: NRodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: NWenjing Liu <wenjing.liu@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Tested-by: NDaniel Wheeler <daniel.wheeler@amd.com>
Acked-by: NRodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: NAric Cyr <aric.cyr@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

This version brings along the following fixes:

- Z9 improvements
- Clocks management adjustments
- Code cleanup
- Improve DSC and MST code
Tested-by: NDaniel Wheeler <daniel.wheeler@amd.com>
Acked-by: NRodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: NAric Cyr <aric.cyr@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[Why & How]
In order to easily test ilr by immediately reset the preferred training settings,
fix the code to disable skip_immediate_retrain.
Tested-by: NDaniel Wheeler <daniel.wheeler@amd.com>
Reviewed-by: NSolomon Chiu <solomon.chiu@amd.com>
Acked-by: NRodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: NWayne Lin <Wayne.Lin@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

- Add Scr8 for GPINT messaging between driver and fw
Tested-by: NDaniel Wheeler <daniel.wheeler@amd.com>
Acked-by: NRodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: NAnthony Koo <Anthony.Koo@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[why]
OnSetSourceContentAttribute it does not trigger an update for the VSC
with TF change.

[how]
In this call, create a new VSC infoPacket based on the new config, and
allow DisplayTarget decide if an update and pursuant passive flip is
necessary
Tested-by: NDaniel Wheeler <daniel.wheeler@amd.com>
Reviewed-by: NKrunoslav Kovac <Krunoslav.Kovac@amd.com>
Acked-by: NRodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: NReza Amini <Reza.Amini@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[why]
Due to bad hardware, the PHY repeater count in LTTPR cap is read as 0xFF
in some monitors while the LTTPR is actually present.

[how]
Remove PHY repeater counter check when configuring LTTPR mode.
Tested-by: NDaniel Wheeler <daniel.wheeler@amd.com>
Reviewed-by: NJun Lei <Jun.Lei@amd.com>
Acked-by: NRodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: NSung Joon Kim <sungkim@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[Why]
indirect register index/data pair may be used by multi-threads.  when it
happens, it would cause register access issue that is hard to trace.

[How]
Using cgs service, which provide a sync indirect reg access api.
Tested-by: NDaniel Wheeler <daniel.wheeler@amd.com>
Reviewed-by: NAric Cyr <Aric.Cyr@amd.com>
Acked-by: NRodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: NRoy Chan <roy.chan@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

DSC sequence for non virtual dpcd synaptics hub
Tested-by: NDaniel Wheeler <daniel.wheeler@amd.com>
Reviewed-by: NHersen Wu <hersenxs.wu@amd.com>
Acked-by: NRodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: NFangzhi Zuo <Jerry.Zuo@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Determine if DFP present and the type of downstream device
based on dsc_aux
Tested-by: NDaniel Wheeler <daniel.wheeler@amd.com>
Reviewed-by: NHersen Wu <hersenxs.wu@amd.com>
Acked-by: NRodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: NFangzhi Zuo <Jerry.Zuo@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Sequence to reset synaptics SDP fifo before enabling first stream
Tested-by: NDaniel Wheeler <daniel.wheeler@amd.com>
Reviewed-by: NHersen Wu <hersenxs.wu@amd.com>
Acked-by: NRodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: NFangzhi Zuo <Jerry.Zuo@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[Why/How]
We need to handle cable capabilities for cables that support cable ID.
The cable attributes are intersected with the verified link caps to
determine appropriate max link rate. After determining cable attributes
we update the DP receiver.
Tested-by: NDaniel Wheeler <daniel.wheeler@amd.com>
Reviewed-by: NWenjing Liu <Wenjing.Liu@amd.com>
Acked-by: NRodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: NGeorge Shen <George.Shen@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[Why]
If the DPCD caps specifies a PSR version newer than PSR_VERSION_1 then
we fallback to using PSR_VERSION_1 in amdgpu_dm_set_psr_caps.

This gets overriden with the raw DPCD value in amdgpu_dm_link_setup_psr,
which can result in DMCUB hanging if we pass in an unsupported PSR
version number.

[How]
Fix the hang by using link->psr_settings.psr_version directly during
amdgpu_dm_link_setup_psr.
Tested-by: NDaniel Wheeler <daniel.wheeler@amd.com>
Reviewed-by: NAnthony Koo <Anthony.Koo@amd.com>
Acked-by: NRodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: NNicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Prepare for future dm can have different implementation depends on the
return value.
Tested-by: NDaniel Wheeler <daniel.wheeler@amd.com>
Reviewed-by: NWenjing Liu <Wenjing.Liu@amd.com>
Acked-by: NRodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: NIan Chen <ian.chen@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[Why]
DMCUB will hang if we send a PSR unsupported set version command.

This can occur if we fall-through into the default case in the switch
statement for PSR version.

[How]
Add an unsupported check after the switch statement.
Tested-by: NDaniel Wheeler <daniel.wheeler@amd.com>
Reviewed-by: NAnthony Koo <Anthony.Koo@amd.com>
Acked-by: NRodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: NNicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[WHY?]
SKUs that contain an unused eDP connector will throw an error when no
display is connected.

[HOW?]
Change error to a warning.
Tested-by: NDaniel Wheeler <daniel.wheeler@amd.com>
Reviewed-by: NMartin Leung <Martin.Leung@amd.com>
Acked-by: NRodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: NDillon Varone <divarone@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Implement handling for escape call to query the MCLK switch support for
the current display config.
Tested-by: NDaniel Wheeler <daniel.wheeler@amd.com>
Reviewed-by: NJun Lei <Jun.Lei@amd.com>
Acked-by: NRodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: NAlvin Lee <Alvin.Lee2@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[Why & How]
Increase width of some variables to avoid comparing integers of
different widths
Tested-by: NDaniel Wheeler <daniel.wheeler@amd.com>
Reviewed-by: NAnthony Koo <Anthony.Koo@amd.com>
Acked-by: NRodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: NJosip Pavic <Josip.Pavic@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[Why]
Link encoders are created based on its engine ID. The position of a link
encoder in an array could be null since it didn't be allocated.  Current
matching logic didn't consider this situation and could get null
encoder.

[How]
To add null encoder check to make the matching logic can go to next to
get a valid one.
Tested-by: NDaniel Wheeler <daniel.wheeler@amd.com>
Reviewed-by: NAric Cyr <Aric.Cyr@amd.com>
Acked-by: NRodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: NMartin Tsai <martin.tsai@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[Why]
Currently, when we're tentatively detecting link configuration under mst
case, we will wrongly notify a none existing stream sink to drm layer.

It's due to we'll call amdgpu_dm_update_connector_after_detect() within
dm_helpers_read_local_edid() to update connector when we're still under
tentative detection procedure.

[How]
dm_helpers_read_local_edid() was designed to do "read" only. Don't
update drm connector status when we're still under detection process.
Tested-by: NDaniel Wheeler <daniel.wheeler@amd.com>
Reviewed-by: NRodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: NWayne Lin <Wayne.Lin@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[why]
There is a recent refactor that contains a typo to cause set throttled
vcp size skipped for dpia link. The change is to fix this typo so it won't cause
black screen
Tested-by: NDaniel Wheeler <daniel.wheeler@amd.com>
Reviewed-by: NJun Lei <Jun.Lei@amd.com>
Acked-by: NWayne Lin <wayne.lin@amd.com>
Signed-off-by: NWenjing Liu <wenjing.liu@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[why]
This is internal to dc so we don't have to add a prefix to indicate it
is dc link_hwss instead someone else link_hwss.
Tested-by: NDaniel Wheeler <daniel.wheeler@amd.com>
Reviewed-by: NAric Cyr <Aric.Cyr@amd.com>
Acked-by: NRodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: NWenjing Liu <wenjing.liu@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[why]
as we add more link_hwss we are making a generic way to determine which type
of link_hwss we should use.
Later on we may think of introduce a link policy layer. it could be a thin layer
that decide the type of link_hwss we use. So instead of passing in link and link_res
we can just pass in link_policy and swtich based on link_policy->get_link_hwss_type.
Tested-by: NDaniel Wheeler <daniel.wheeler@amd.com>
Reviewed-by: NAric Cyr <Aric.Cyr@amd.com>
Acked-by: NRodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: NWenjing Liu <wenjing.liu@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[why]
Current we have hundreds of if/else or switch statement to check
encoder type in dc_link level. The reason is because depending
on the type of encoder dc_link needs to perform similar programming
task but with different encoder interfaces. The story is to abstract
these interfaces so dc_link can just perform the programming task
without knowing the detail of which encoder it's dealing with.
Tested-by: NDaniel Wheeler <daniel.wheeler@amd.com>
Reviewed-by: NAric Cyr <Aric.Cyr@amd.com>
Acked-by: NRodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: NWenjing Liu <wenjing.liu@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[Why & How]
DCN guard is not necessary for DP2.x relevant logic.
Drop them.

v2: squash in fix for misplaced #endif (Alex)
Tested-by: NDaniel Wheeler <daniel.wheeler@amd.com>
Reviewed-by: NRodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Reviewed-by: NJerry Zuo <Jerry.Zuo@amd.com>
Acked-by: NRodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: NWenjing Liu <wenjing.liu@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[Why]
According to the USB4 specification, FEC and DSC should be disabled
when a USB4 DPIA operates in TBT3 compatibility mode.

[How]
Upon detecting that a USB4 DPIA is connected to a device that is known
to operate in TBT3 mode, disable FEC and DSC support if they have been
reported by the TBT3 device.
Tested-by: NDaniel Wheeler <daniel.wheeler@amd.com>
Reviewed-by: NMeenakshikumar Somasundaram <Meenakshikumar.Somasundaram@amd.com>
Acked-by: NRodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: NJimmy Kizito <Jimmy.Kizito@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[why]
dc_link_detect_helper has multiple purpose:
1. Detect link and local sink.
2. Verify link capability by performing detection link training.
3. Start mst topology discovery and if succeeded fails the current interface.

This is difficult to maintain as item 2 has become more destructive to current
dc state. The change is to decouple these sequences to its own functions.
Eventually only item 2 is a destructive method and we will redesign this
sequence with a more unified policy across different encoder types.
Tested-by: NDaniel Wheeler <daniel.wheeler@amd.com>
Reviewed-by: NChris Park <Chris.Park@amd.com>
Acked-by: NRodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: NWenjing Liu <wenjing.liu@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>