- 14 9月, 2011 38 次提交
-
-
由 Arik Nemtsov 提交于
Check a STA is associated before regulating its PS-status in mac80211. Should never happen, so warn as a precaution. [Small cosmetic change wrt Kalle Valo's comment. -- Luca] Signed-off-by: NArik Nemtsov <arik@wizery.com> Signed-off-by: NLuciano Coelho <coelho@ti.com>
-
由 Arik Nemtsov 提交于
Dummy packets are currently only sent on the system_hlid link. The system_hlid link should never be filtered for PS (as it is not a STA link). Even so, for correctness, don't indicate dummy packets up. The skb does not belong to mac80211 and as such does not contain a correct skb->cb. Signed-off-by: NArik Nemtsov <arik@wizery.com> Signed-off-by: NLuciano Coelho <coelho@ti.com>
-
由 Luciano Coelho 提交于
For now, cfg80211 only support match sets with SSIDs, but in the future more parameters will be added. This patch ignores eventual matches that do not contain SSIDs in preparation for the future. This change also affects the case where broadcast SSIDs are used. Matching a broadcast SSID will match everything, so they can be ignored. Signed-off-by: NLuciano Coelho <coelho@ti.com>
-
由 Luciano Coelho 提交于
The latest firmware supports up to 16 SSIDs in the scheduled scan lists. Increase the number we report to cfg80211 and increase the min/max dwell time to 30 and 60 TUs respectively, because otherwise we don't have the time to send the probes for all SSIDs. Signed-off-by: NLuciano Coelho <coelho@ti.com>
-
由 Luciano Coelho 提交于
Implement support for filtering in scheduled scans. With this commit we now use the match sets passed by cfg80211 to filter on SSIDs. Due to the nature of the wl12xx firmware API, we don't allow SSIDs to be sent in the probe requests if they are not going to match any of the filters. Signed-off-by: NLuciano Coelho <coelho@ti.com>
-
由 Eliad Peller 提交于
Declare support for uapsd when working as AP, and set psd_type and sp_len whan a station is being added. Signed-off-by: NEliad Peller <eliad@wizery.com> Signed-off-by: NLuciano Coelho <coelho@ti.com>
-
由 Eliad Peller 提交于
simplify code by calling kstrtoul_from_user() (instead of copy_from_user() + kstrtoul()) Signed-off-by: NEliad Peller <eliad@wizery.com> Signed-off-by: NLuciano Coelho <coelho@ti.com>
-
由 Luciano Coelho 提交于
The driver now support HT properly, so we can always have HT enabled. Remove the WL12XX_HT configuration. Signed-off-by: NLuciano Coelho <coelho@ti.com>
-
由 Arik Nemtsov 提交于
The firmware only asks for one dummy packet at a time, but sometimes we are unable to provide it before a FW timer expires. When this happens, the FW will re-request the dummy packet. If a packet is still queued in the driver queues, do nothing in this case. This prevents spurious dummy packets from clogging up the VO AC. Signed-off-by: NArik Nemtsov <arik@wizery.com> Signed-off-by: NEliad Peller <eliad@wizery.com> Signed-off-by: NLuciano Coelho <coelho@ti.com>
-
由 Eliad Peller 提交于
Add wl12xx_acx_config_hangover() and respective conf values. This command configures how long the chip will stay awake after it was configured to enter psm. Signed-off-by: NEliad Peller <eliad@wizery.com> Signed-off-by: NLuciano Coelho <coelho@ti.com>
-
由 Eliad Peller 提交于
When scan completes, and we are not associated, we should start the dev role and ROC. however, we might already be in this situation (e.g. if we got disconnected during scan). check for it. Signed-off-by: NEliad Peller <eliad@wizery.com> Signed-off-by: NLuciano Coelho <coelho@ti.com>
-
由 Eliad Peller 提交于
When setting the WL1271_SCAN_OPT_PRIORITY_HIGH flag, the driver requests a scan *now*, and the fw doesn't enter psm before scanning, which in turn might cause packets loss. Signed-off-by: NEliad Peller <eliad@wizery.com> Signed-off-by: NLuciano Coelho <coelho@ti.com>
-
由 Eliad Peller 提交于
allow full connection recovery by dropping the beacon_loss notification. Signed-off-by: NEliad Peller <eliad@wizery.com> Signed-off-by: NLuciano Coelho <coelho@ti.com>
-
由 Eliad Peller 提交于
Allow enabling/disabling beacon_filtering by debugfs, in order to reduce the log size while debugging (beacon filtering is disabled by default in AP mode, as beacons are needed for ERP configuration). Signed-off-by: NEliad Peller <eliad@wizery.com> Signed-off-by: NLuciano Coelho <coelho@ti.com>
-
由 Eliad Peller 提交于
Crashing on recovery is useful for debugging, as a JTAG can be connected in order to investigate the current fw state. (otherwise, a reconfiguration will occur) Signed-off-by: NEliad Peller <eliad@wizery.com> Signed-off-by: NLuciano Coelho <coelho@ti.com>
-
由 Eliad Peller 提交于
Make it easier to match the driver log against a sniffer log. Signed-off-by: NEliad Peller <eliad@wizery.com> Signed-off-by: NLuciano Coelho <coelho@ti.com>
-
由 Eliad Peller 提交于
Add id param to the acx debug print (on wl1271_cmd_configure) Signed-off-by: NEliad Peller <eliad@wizery.com> Signed-off-by: NLuciano Coelho <coelho@ti.com>
-
由 Bill Jordan 提交于
In commit 9c204b46 (ath9k_hw: do not limit initial tx power to 20 dbm), setting of txpower was broken. This patch fixes it by initializing reg_pwr from the new power limit, not the previous value. Signed-off-by: NBill Jordan <bjordan@rajant.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Rafał Miłecki 提交于
It was not possible to guess the conditions from MMIO dumps. Take them from brcmsmac code. Signed-off-by: NRafał Miłecki <zajec5@gmail.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Rafał Miłecki 提交于
We've compared b43 with brcmsmac and took functions names from the later. Signed-off-by: NRafał Miłecki <zajec5@gmail.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Rafał Miłecki 提交于
Signed-off-by: NRafał Miłecki <zajec5@gmail.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Rafał Miłecki 提交于
This is not implemented in brcmsmac, but was noticed in (newer) wl. Can be workaround for some hardware bug. Signed-off-by: NRafał Miłecki <zajec5@gmail.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Rafał Miłecki 提交于
Signed-off-by: NRafał Miłecki <zajec5@gmail.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Rafał Miłecki 提交于
The biggest change is reversing order of reading 32-bit table value. MMIO dumps has shown it's done that way for LCN-PHY. Signed-off-by: NRafał Miłecki <zajec5@gmail.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 zero.lin 提交于
Signed-off-by: Nzero.lin <zero.lin@ralinktech.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Dan Carpenter 提交于
unsigned shorts and unsigned chars are never == -1. Signed-off-by: NDan Carpenter <error27@gmail.com> Signed-off-by: NWey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Dan Carpenter 提交于
"vif" is assigned twice. We can remove the first one. This silences a Smatch warning that "ctx" could be one step past the end of the priv->contexts[] array. Signed-off-by: NDan Carpenter <error27@gmail.com> Reviewed-by: NJohannes Berg <johannes@sipsolutions.net> Signed-off-by: NWey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Rajkumar Manoharan 提交于
Rx latecy to start signal(usec) of 11a is 41 not 37 and also corrected the rx delay in quarter rate. Signed-off-by: NRajkumar Manoharan <rmanohar@qca.qualcomm.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Yogesh Ashok Powar 提交于
Sequence of kmalloc/kzalloc and memcpy is replaced with kmemdup. Cc: Walter Harms <wharms@bfs.de> Signed-off-by: NYogesh Ashok Powar <yogeshp@marvell.com> Signed-off-by: NKiran Divekar <dkiran@marvell.com> Signed-off-by: NBing Zhao <bzhao@marvell.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Felix Fietkau 提交于
The commit "ath9k_hw: Fix exceed transmission burst-time of 5GHz" added a padding of 60 delimiters on the first subframe to work around an issue on AR9380, but it lacked the checks to prevent it from being applied to pre-AR9380, enterprise AR9380 or AR9580+ Signed-off-by: NFelix Fietkau <nbd@openwrt.org> Cc: Rajkumar Manoharan <rmanohar@qca.qualcomm.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Yogesh Ashok Powar 提交于
This will avoid mac80211 to trigger PS mode for connected station based on the PM bit of incoming frames. AP firmware is capable of handling such frames and buffering TX frames destined to the stations that are in PS mode. Signed-off-by: NYogesh Ashok Powar <yogeshp@marvell.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Felix Fietkau 提交于
The previous register used in these initvals was probably accidentally copied over from the AR9100 values. Signed-off-by: NFelix Fietkau <nbd@openwrt.org> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Felix Fietkau 提交于
It was used for the defunct 'turbo' mode which was never implemented in the driver. Saves ~7.5k uncompressed Signed-off-by: NFelix Fietkau <nbd@openwrt.org> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Rafał Miłecki 提交于
Signed-off-by: NRafał Miłecki <zajec5@gmail.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Rafał Miłecki 提交于
Switching is not fully implemented yet, prepare place for the code. Signed-off-by: NRafał Miłecki <zajec5@gmail.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Rafał Miłecki 提交于
Signed-off-by: NRafał Miłecki <zajec5@gmail.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Rafał Miłecki 提交于
Signed-off-by: NRafał Miłecki <zajec5@gmail.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Felix Fietkau 提交于
It is only used to workaround interoperability issues related to longer delays in receiving the block ack, so it is not necessary to apply it to the CTS exchange. Should improve throughput slightly, especially when there are lots of retransmissions. Signed-off-by: NFelix Fietkau <nbd@openwrt.org> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
- 31 8月, 2011 2 次提交
-
-
由 Greg Dietsche 提交于
this comment refers to some code that was removed. Signed-off-by: NGreg Dietsche <Gregory.Dietsche@cuw.edu> Signed-off-by: NWey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Felix Fietkau 提交于
With sequence number and buffer allocation deferred to when they're needed for the first time, it becomes much easier to start dropping packets from the tid queue if necessary, e.g. when latency suddenly increases. This can lead to some future improvements in buffer management for better latency. Signed-off-by: NFelix Fietkau <nbd@openwrt.org> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-