The ALC882 macpro and imac24 static configs can be transferred to the
auto-parser with the additional GPIO setup.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

In the commit [c3e837bb: ALSA: hda/realtek - Rewrite ALC882 acer-aspire-*
models with the auto-parser], the check of the model option got removed
mistakenly.  Re-added the board_config check again.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Remove unused variables.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

When the pin or the DAC doesn't support the stereo, create a mono
control instead of creating a stereo control blindly.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Now we can move the big acer-aspire-* static quirks to the auto-paresr
with some additional pin-configs and verbs.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

So far the driver creates the multi-io jacks only when a single output
jack, i.e. no multiple speakers are assigned.  This patch adds the
similar multi-io detection even with multiple speakers are assigned
primarily, so that 5.1-speakers + HP/mic/LI combination can work.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

We disabled the check of NO_PRESENCE bit of the default pin-config
in commit f4419172 temporarily.  One problem was that the first
implementation was wrong -- the bit after the shift must be checked.
However, this would still give many regressions on machines with broken
BIOS.  They set this bit wrongly even on active pins.

A workaround is to check whether all pins contain this bit.  As far as
I've checked, broken BIOSen set this bit on all pins, no matter whether
active or not.  In such a case, the driver should ignore this bit check.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

When freeing the vmaster master element, we should release slave-links
properly, not only assumig that slaves will be freed soon later.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

When a virtual mater control is created, the driver looks for slave
elements from the assigned card instance.  But this may include the
elements of other codecs when multiple codecs are on the same HD-audio
bus.  This works at the first time, but it'll give Oops when it's once
freed and re-created via reconfig sysfs.

This patch changes the element-look-up strategy to limit only to the
mixer elements of the same codec.
Reported-by: NDavid Henningsson <david.henningsson@canonical.com>
Cc: <stable@kernel.org>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Detection code improved by PCI SSID usage. VM optimization
now enabled only for known devcices (skip host devices forwarded
to VM by VT-d or same kind of technology).
For debug/troubleshooting purposes optimization can be
forced (on/off) by module parameter: "inside_vm" (boolean).

Known devices (PCI SSID):
1af4:1100: Reserved for KVM devices. Note this is not yet
           implemented for KVM's ICH/AC'97 emulation.
1ab8:xxxx: Parallels ICH/AC'97 emulated sound.

[ fixed a minor coding-style issue by tiwai]
Signed-off-by: NKonstantin Ozerkov <kozerkov@parallels.com>
Signed-off-by: NDenis V. Lunev <den@openvz.org>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

This is refactoring patch: preparation for add improved detection code.
Now all detection code placed in one place.
Signed-off-by: NKonstantin Ozerkov <kozerkov@parallels.com>
Signed-off-by: NDenis V. Lunev <den@openvz.org>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Now we're touching the desktop static configs for ALC88x codecs.
These are mostly OK with the auto-parser, but some models need careful
handling; ALC889 intel mobo requires the COEF setup, and W2JC needs
GPIO1 and COEF.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

All ALC882 targa-* models can be replaced with the auto-parser just
with the additional GPIO3 setup.  And it's generically applied to all
MSI boards unless other quirks are present.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

No, I'm not Mr. Monk, but can't resist...
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

The ALC882 model=acer-aspire requires the additional COEF setup.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

This quirk is anyway not used any more, so no problem to remove.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

This works well without any special handling with the auto-parser.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

These static configs are no longer needed by replacement with the
auto-parser.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Move these quitks to the auto-parser.  They just need some EAPD setups
in addition.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

These are working well with the auto-parser although they have
relatively complex setup.  Let's go forward.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Remove all ALC882 static configurations for all Lenovo and Haier-w66
quirks.  They work fine with the auto-parser now.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

These machines are working well with the auto-parser without static
configurations.  More diet.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

These models work fine with the auto-parser with the additional COEF
setup.  The iMac 7,1 (106b:3200) also uses the same quirk, so remove it
too.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Not only PCI SSIDs but also look through codec SSIDs for fix-up table
entries.  MacBook tend to give the same PCI SSID but unique codec SSIDs.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

The ASUS EEE1601 works almost fine with the auto-parser but the static
configuration has a certain specific COEF verb.  Add this to the fix-up
list so that we can drop the whole EEE1601 static config from
alc882_quirks.c.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

It works well with the auto-parser and the default BIOS setup.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Logitech HD Webcam c510 provide wrong mixer resolution.
Add it to "res = 384" quirk.
Signed-off-by: NAlexey Fisher <bug-track@fisher-privat.net>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Fix the not working internal mic on Dell Vostro 3500 laptop by introducing the
new model dell-vostro-3500.
Signed-off-by: NJulian Wollrath <jwollrath@web.de>
Cc: <stable@kernel.org>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

According to the bug reporter, model=auto is needed to make the
internal microphone work.

BugLink: https://bugs.launchpad.net/bugs/819699
Reported-by: Andrej (agno01)
Signed-off-by: NDavid Henningsson <david.henningsson@canonical.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

In the recent usb-audio driver, the initialization of volume ranges
may be delayed when the device doesn't respond well at the probing time.
But the volume quirks for certain devices are applied only in
mixer_ctl_feature_info() thus only at the very first probe and will be
missing when the volume range is initialized later.

This patch moves the volume quirk code to be always called from the
volume-range extraction (get_min_max()), so that the quirks are properly
applied in the later init time.
Reported-and-tested-by: NAlexey Fisher <bug-track@fisher-privat.net>
Cc: <stable@kernel.org>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Providing a pincfg fix for VAIO-TT with ALC889 codec to work with the
auto-parser, and drop the static configuration.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Now that model=ultra is supported well by the auto-parser, we can get rid
of the whole alc262_quirks.c and its related codes.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

A machine like Q1-ultra which has only a single HP but no mic-jack, we
can re-task the headhpone as an external mic jack.  This was done formerly
in ALC262 model=ultra quirk, and now the auto-parser supports this mode.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Now most of ALC262 stuff has been moved to the auto-parser, and no longer
need for keeping model=basic.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Both entries for ALC262 model=hippo work well with the auto-parser and
the default BIOS setup.  No static configs are needed, so drop them.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

This model (actually BenQ Joybook) works fine with the default auto-parser
and the BIOS setup.  Just drop the static quirks.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

It works well with the auto-parse and the default BIOS setup when an
additional COEF setup (for benq) is used.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

The conversion from ALC262 model=benq and model=benq-t31 static configs
to auto-parser requires the manual COEF setups for corresponding models.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>