提交 25da1f86 编写于 作者: T Takashi Iwai

ALSA: hda/realtek - Drop ALC882 model=acer quirk

This quirk is anyway not used any more, so no problem to remove.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>
上级 b3ca3bf5
......@@ -24,7 +24,6 @@ enum {
ALC883_TARGA_DIG,
ALC883_TARGA_2ch_DIG,
ALC883_TARGA_8ch_DIG,
ALC883_ACER,
ALC883_ACER_ASPIRE,
ALC888_ACER_ASPIRE_4930G,
ALC888_ACER_ASPIRE_6530G,
......@@ -2089,7 +2088,6 @@ static const char * const alc882_models[ALC882_MODEL_LAST] = {
[ALC883_TARGA_DIG] = "targa-dig",
[ALC883_TARGA_2ch_DIG] = "targa-2ch-dig",
[ALC883_TARGA_8ch_DIG] = "targa-8ch-dig",
[ALC883_ACER] = "acer",
[ALC883_ACER_ASPIRE] = "acer-aspire",
[ALC888_ACER_ASPIRE_4930G] = "acer-aspire-4930g",
[ALC888_ACER_ASPIRE_6530G] = "acer-aspire-6530g",
......@@ -2127,10 +2125,6 @@ static const struct snd_pci_quirk alc882_cfg_tbl[] = {
ALC888_ACER_ASPIRE_6530G),
SND_PCI_QUIRK(0x1025, 0x0142, "Acer Aspire 7730G",
ALC888_ACER_ASPIRE_7730G),
/* default Acer -- disabled as it causes more problems.
* model=auto should work fine now
*/
/* SND_PCI_QUIRK_VENDOR(0x1025, "Acer laptop", ALC883_ACER), */
SND_PCI_QUIRK(0x103c, 0x2a3d, "HP Pavilion", ALC883_6ST_DIG),
SND_PCI_QUIRK(0x103c, 0x2a61, "HP Nettle", ALC883_6ST_DIG),
......@@ -2524,20 +2518,6 @@ static const struct alc_config_preset alc882_presets[] = {
.setup = alc882_targa_setup,
.init_hook = alc882_targa_automute,
},
[ALC883_ACER] = {
.mixers = { alc883_base_mixer },
/* On TravelMate laptops, GPIO 0 enables the internal speaker
* and the headphone jack. Turn this on and rely on the
* standard mute methods whenever the user wants to turn
* these outputs off.
*/
.init_verbs = { alc883_init_verbs, alc880_gpio1_init_verbs },
.num_dacs = ARRAY_SIZE(alc883_dac_nids),
.dac_nids = alc883_dac_nids,
.num_channel_mode = ARRAY_SIZE(alc883_3ST_2ch_modes),
.channel_mode = alc883_3ST_2ch_modes,
.input_mux = &alc883_capture_source,
},
[ALC883_ACER_ASPIRE] = {
.mixers = { alc883_acer_aspire_mixer },
.init_verbs = { alc883_init_verbs, alc883_acer_eapd_verbs },
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册