Update struct_ops selftests to always specify "struct_ops" section
prefix. Libbpf will require a proper BPF program type set in the next
patch, so this prevents tests breaking.
Signed-off-by: NAndrii Nakryiko <andrii@kernel.org>
Signed-off-by: NAlexei Starovoitov <ast@kernel.org>
Acked-by: NMartin KaFai Lau <kafai@fb.com>
Link: https://lore.kernel.org/bpf/20210914014733.2768-2-andrii@kernel.org

Allow kprobe tracepoint events creation through legacy interface, as the
kprobe dynamic PMUs support, used by default, was only created in v4.17.

Store legacy kprobe name in struct bpf_perf_link, instead of creating
a new "subclass" off of bpf_perf_link. This is ok as it's just two new
fields, which are also going to be reused for legacy uprobe support in
follow up patches.
Signed-off-by: NRafael David Tinoco <rafaeldtinoco@gmail.com>
Signed-off-by: NAndrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20210912064844.3181742-1-rafaeldtinoco@gmail.com

Turn previously auto-generated libbpf_version.h header into a normal
header file. This prevents various tricky Makefile integration issues,
simplifies the overall build process, but also allows to further extend
it with some more versioning-related APIs in the future.

To prevent accidental out-of-sync versions as defined by libbpf.map and
libbpf_version.h, Makefile checks their consistency at build time.

Simultaneously with this change bump libbpf.map to v0.6.

Also undo adding libbpf's output directory into include path for
kernel/bpf/preload, bpftool, and resolve_btfids, which is not necessary
because libbpf_version.h is just a normal header like any other.

Fixes: 0b46b755 ("libbpf: Add LIBBPF_DEPRECATED_SINCE macro for scheduling API deprecations")
Signed-off-by: NAndrii Nakryiko <andrii@kernel.org>
Signed-off-by: NAlexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20210913222309.3220849-1-andrii@kernel.org

The tailcall_3 test program uses bpf_tail_call_static() where the JIT
would patch a direct jump. Add a new tailcall_6 test program replicating
exactly the same test just ensuring that bpf_tail_call() uses a map
index where the verifier cannot make assumptions this time.

In other words, this will now cover both on x86-64 JIT, meaning, JIT
images with emit_bpf_tail_call_direct() emission as well as JIT images
with emit_bpf_tail_call_indirect() emission.

  # echo 1 > /proc/sys/net/core/bpf_jit_enable
  # ./test_progs -t tailcalls
  #136/1 tailcalls/tailcall_1:OK
  #136/2 tailcalls/tailcall_2:OK
  #136/3 tailcalls/tailcall_3:OK
  #136/4 tailcalls/tailcall_4:OK
  #136/5 tailcalls/tailcall_5:OK
  #136/6 tailcalls/tailcall_6:OK
  #136/7 tailcalls/tailcall_bpf2bpf_1:OK
  #136/8 tailcalls/tailcall_bpf2bpf_2:OK
  #136/9 tailcalls/tailcall_bpf2bpf_3:OK
  #136/10 tailcalls/tailcall_bpf2bpf_4:OK
  #136/11 tailcalls/tailcall_bpf2bpf_5:OK
  #136 tailcalls:OK
  Summary: 1/11 PASSED, 0 SKIPPED, 0 FAILED

  # echo 0 > /proc/sys/net/core/bpf_jit_enable
  # ./test_progs -t tailcalls
  #136/1 tailcalls/tailcall_1:OK
  #136/2 tailcalls/tailcall_2:OK
  #136/3 tailcalls/tailcall_3:OK
  #136/4 tailcalls/tailcall_4:OK
  #136/5 tailcalls/tailcall_5:OK
  #136/6 tailcalls/tailcall_6:OK
  [...]

For interpreter, the tailcall_1-6 tests are passing as well. The later
tailcall_bpf2bpf_* are failing due lack of bpf2bpf + tailcall support
in interpreter, so this is expected.

Also, manual inspection shows that both loaded programs from tailcall_3
and tailcall_6 test case emit the expected opcodes:

* tailcall_3 disasm, emit_bpf_tail_call_direct():

  [...]
   b:   push   %rax
   c:   push   %rbx
   d:   push   %r13
   f:   mov    %rdi,%rbx
  12:   movabs $0xffff8d3f5afb0200,%r13
  1c:   mov    %rbx,%rdi
  1f:   mov    %r13,%rsi
  22:   xor    %edx,%edx                 _
  24:   mov    -0x4(%rbp),%eax          |  limit check
  2a:   cmp    $0x20,%eax               |
  2d:   ja     0x0000000000000046       |
  2f:   add    $0x1,%eax                |
  32:   mov    %eax,-0x4(%rbp)          |_
  38:   nopl   0x0(%rax,%rax,1)
  3d:   pop    %r13
  3f:   pop    %rbx
  40:   pop    %rax
  41:   jmpq   0xffffffffffffe377
  [...]

* tailcall_6 disasm, emit_bpf_tail_call_indirect():

  [...]
  47:   movabs $0xffff8d3f59143a00,%rsi
  51:   mov    %edx,%edx
  53:   cmp    %edx,0x24(%rsi)
  56:   jbe    0x0000000000000093        _
  58:   mov    -0x4(%rbp),%eax          |  limit check
  5e:   cmp    $0x20,%eax               |
  61:   ja     0x0000000000000093       |
  63:   add    $0x1,%eax                |
  66:   mov    %eax,-0x4(%rbp)          |_
  6c:   mov    0x110(%rsi,%rdx,8),%rcx
  74:   test   %rcx,%rcx
  77:   je     0x0000000000000093
  79:   pop    %rax
  7a:   mov    0x30(%rcx),%rcx
  7e:   add    $0xb,%rcx
  82:   callq  0x000000000000008e
  87:   pause
  89:   lfence
  8c:   jmp    0x0000000000000087
  8e:   mov    %rcx,(%rsp)
  92:   retq
  [...]
Signed-off-by: NDaniel Borkmann <daniel@iogearbox.net>
Signed-off-by: NAlexei Starovoitov <ast@kernel.org>
Tested-by: NTiezhu Yang <yangtiezhu@loongson.cn>
Acked-by: NYonghong Song <yhs@fb.com>
Acked-by: NJohan Almbladh <johan.almbladh@anyfinetworks.com>
Acked-by: NPaul Chaignon <paul@cilium.io>
Link: https://lore.kernel.org/bpf/CAM1=_QRyRVCODcXo_Y6qOm1iT163HoiSj8U2pZ8Rj3hzMTT=HQ@mail.gmail.com
Link: https://lore.kernel.org/bpf/20210910091900.16119-1-daniel@iogearbox.net

Song Liu says:

====================

Changes v6 => v7:
1. Improve/fix intel_pmu_snapshot_branch_stack() logic. (Peter).

Changes v5 => v6:
1. Add local_irq_save/restore to intel_pmu_snapshot_branch_stack. (Peter)
2. Remove buf and size check in bpf_get_branch_snapshot, move flags check
   to later fo the function. (Peter, Andrii)
3. Revise comments for bpf_get_branch_snapshot in bpf.h (Andrii)

Changes v4 => v5:
1. Modify perf_snapshot_branch_stack_t to save some memcpy. (Andrii)
2. Minor fixes in selftests. (Andrii)

Changes v3 => v4:
1. Do not reshuffle intel_pmu_disable_all(). Use some inline to save LBR
   entries. (Peter)
2. Move static_call(perf_snapshot_branch_stack) to the helper. (Alexei)
3. Add argument flags to bpf_get_branch_snapshot. (Andrii)
4. Make MAX_BRANCH_SNAPSHOT an enum (Andrii). And rename it as
   PERF_MAX_BRANCH_SNAPSHOT
5. Make bpf_get_branch_snapshot similar to bpf_read_branch_records.
   (Andrii)
6. Move the test target function to bpf_testmod. Updated kallsyms_find_next
   to work properly with modules. (Andrii)

Changes v2 => v3:
1. Fix the use of static_call. (Peter)
2. Limit the use to perfmon version >= 2. (Peter)
3. Modify intel_pmu_snapshot_branch_stack() to use intel_pmu_disable_all
   and intel_pmu_enable_all().

Changes v1 => v2:
1. Rename the helper as bpf_get_branch_snapshot;
2. Fix/simplify the use of static_call;
3. Instead of percpu variables, let intel_pmu_snapshot_branch_stack output
   branch records to an output argument of type perf_branch_snapshot.

Branch stack can be very useful in understanding software events. For
example, when a long function, e.g. sys_perf_event_open, returns an errno,
it is not obvious why the function failed. Branch stack could provide very
helpful information in this type of scenarios.

This set adds support to read branch stack with a new BPF helper
bpf_get_branch_trace(). Currently, this is only supported in Intel systems.
It is also possible to support the same feaure for PowerPC.

The hardware that records the branch stace is not stopped automatically on
software events. Therefore, it is necessary to stop it in software soon.
Otherwise, the hardware buffers/registers will be flushed. One of the key
design consideration in this set is to minimize the number of branch record
entries between the event triggers and the hardware recorder is stopped.
Based on this goal, current design is different from the discussions in
original RFC [1]:
 1) Static call is used when supported, to save function pointer
    dereference;
 2) intel_pmu_lbr_disable_all is used instead of perf_pmu_disable(),
    because the latter uses about 10 entries before stopping LBR.

With current code, on Intel CPU, LBR is stopped after 7 branch entries
after fexit triggers:

ID: 0 from bpf_get_branch_snapshot+18 to intel_pmu_snapshot_branch_stack+0
ID: 1 from __brk_limit+477143934 to bpf_get_branch_snapshot+0
ID: 2 from __brk_limit+477192263 to __brk_limit+477143880  # trampoline
ID: 3 from __bpf_prog_enter+34 to __brk_limit+477192251
ID: 4 from migrate_disable+60 to __bpf_prog_enter+9
ID: 5 from __bpf_prog_enter+4 to migrate_disable+0
ID: 6 from bpf_testmod_loop_test+20 to __bpf_prog_enter+0
ID: 7 from bpf_testmod_loop_test+20 to bpf_testmod_loop_test+13
ID: 8 from bpf_testmod_loop_test+20 to bpf_testmod_loop_test+13
...

[1] https://lore.kernel.org/bpf/20210818012937.2522409-1-songliubraving@fb.com/
====================
Signed-off-by: NAlexei Starovoitov <ast@kernel.org>

This test uses bpf_get_branch_snapshot from a fexit program. The test uses
a target function (bpf_testmod_loop_test) and compares the record against
kallsyms. If there isn't enough record matching kallsyms, the test fails.
Signed-off-by: NSong Liu <songliubraving@fb.com>
Signed-off-by: NAlexei Starovoitov <ast@kernel.org>
Acked-by: NAndrii Nakryiko <andrii@kernel.org>
Acked-by: NJohn Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/bpf/20210910183352.3151445-4-songliubraving@fb.com

Introduce bpf_get_branch_snapshot(), which allows tracing pogram to get
branch trace from hardware (e.g. Intel LBR). To use the feature, the
user need to create perf_event with proper branch_record filtering
on each cpu, and then calls bpf_get_branch_snapshot in the bpf function.
On Intel CPUs, VLBR event (raw event 0x1b00) can be use for this.
Signed-off-by: NSong Liu <songliubraving@fb.com>
Signed-off-by: NAlexei Starovoitov <ast@kernel.org>
Acked-by: NJohn Fastabend <john.fastabend@gmail.com>
Acked-by: NAndrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20210910183352.3151445-3-songliubraving@fb.com

The typical way to access branch record (e.g. Intel LBR) is via hardware
perf_event. For CPUs with FREEZE_LBRS_ON_PMI support, PMI could capture
reliable LBR. On the other hand, LBR could also be useful in non-PMI
scenario. For example, in kretprobe or bpf fexit program, LBR could
provide a lot of information on what happened with the function. Add API
to use branch record for software use.

Note that, when the software event triggers, it is necessary to stop the
branch record hardware asap. Therefore, static_call is used to remove some
branch instructions in this process.
Suggested-by: NPeter Zijlstra <peterz@infradead.org>
Signed-off-by: NSong Liu <songliubraving@fb.com>
Signed-off-by: NAlexei Starovoitov <ast@kernel.org>
Acked-by: NJohn Fastabend <john.fastabend@gmail.com>
Acked-by: NAndrii Nakryiko <andrii@kernel.org>
Acked-by: NPeter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/bpf/20210910183352.3151445-2-songliubraving@fb.com

Analogous to the gso_segs selftests introduced in commit d9ff286a
("bpf: allow BPF programs access skb_shared_info->gso_segs field").
Signed-off-by: NVadim Fedorenko <vfedorenko@novek.ru>
Signed-off-by: NDaniel Borkmann <daniel@iogearbox.net>
Acked-by: NMartin KaFai Lau <kafai@fb.com>
Link: https://lore.kernel.org/bpf/20210909220409.8804-3-vfedorenko@novek.ru

BPF programs may want to know hardware timestamps if NIC supports
such timestamping.

Expose this data as hwtstamp field of __sk_buff the same way as
gso_segs/gso_size. This field could be accessed from the same
programs as tstamp field, but it's read-only field. Explicit test
to deny access to padding data is added to bpf_skb_is_valid_access.

Also update BPF_PROG_TEST_RUN tests of the feature.
Signed-off-by: NVadim Fedorenko <vfedorenko@novek.ru>
Signed-off-by: NDaniel Borkmann <daniel@iogearbox.net>
Acked-by: NMartin KaFai Lau <kafai@fb.com>
Link: https://lore.kernel.org/bpf/20210909220409.8804-2-vfedorenko@novek.ru

Magnus Karlsson says:

====================
This patch set facilitates adding new tests as well as describing
existing ones in the xsk selftests suite and adds 3 new test suites at
the end. The idea is to isolate the run-time that executes the test
from the actual implementation of the test. Today, implementing a test
amounts to adding test specific if-statements all around the run-time,
which is not scalable or amenable for reuse. This patch set instead
introduces a test specification that is the only thing that a test
fills in. The run-time then gets this specification and acts upon it
completely unaware of what test it is executing. This way, we can get
rid of all test specific if-statements from the run-time and the
implementation of the test can be contained in a single function. This
hopefully makes it easier to add tests and for users to understand
what the test accomplishes.

As a recap of what the run-time does: each test is based on the
run-time launching two threads and connecting a veth link between the
two threads. Each thread opens an AF_XDP socket on that veth interface
and one of them sends traffic that the other one receives and
validates. Each thread has its own umem. Note that this behavior is
not changed by this patch set.

A test specification consists of several items. Most importantly:

* Two packet streams. One for Tx thread that specifies what traffic to
  send and one for the Rx thread that specifies what that thread
  should receive. If it receives exactly what is specified, the test
  passes, otherwise it fails. A packet stream can also specify what
  buffers in the umem that should be used by the Rx and Tx threads.

* What kind of AF_XDP sockets it should create and bind to what
  interfaces

* How many times it should repeat the socket creation and destruction

* The name of the test

The interface for the test spec is the following:

void test_spec_init(struct test_spec *test, struct ifobject *ifobj_tx,
                    struct ifobject *ifobj_rx, enum test_mode mode);

/* Reset everything but the interface specifications and the mode */
void test_spec_reset(struct test_spec *test);

void test_spec_set_name(struct test_spec *test, const char *name);

Packet streams have the following interfaces:

struct pkt *pkt_stream_get_pkt(struct pkt_stream *pkt_stream, u32 pkt_nb)

struct pkt *pkt_stream_get_next_rx_pkt(struct pkt_stream *pkt_stream)

struct pkt_stream *pkt_stream_generate(struct xsk_umem_info *umem,
                                       u32 nb_pkts, u32 pkt_len);

void pkt_stream_delete(struct pkt_stream *pkt_stream);

struct pkt_stream *pkt_stream_clone(struct xsk_umem_info *umem,
                                    struct pkt_stream *pkt_stream);

/* Replaces all packets in the stream*/
void pkt_stream_replace(struct test_spec *test, u32 nb_pkts, u32 pkt_len);

/* Replaces every other packet in the stream */
void pkt_stream_replace_half(struct test_spec *test, u32 pkt_len, u32 offset);

/* For creating custom made packet streams */
void pkt_stream_generate_custom(struct test_spec *test, struct pkt *pkts,
                                u32 nb_pkts);

/* Restores the default packet stream */
void pkt_stream_restore_default(struct test_spec *test);

A test can then then in the most basic case described like this
(provided the test specification has been created before calling the
function):

static bool testapp_aligned(struct test_spec *test)
{
        test_spec_set_name(test, "RUN_TO_COMPLETION");
        testapp_validate_traffic(test);
}

Running the same test in unaligned mode would then look like this:

static bool testapp_unaligned(struct test_spec *test)
{
        if (!hugepages_present(test->ifobj_tx)) {
                ksft_test_result_skip("No 2M huge pages present.\n");
                return false;
        }

        test_spec_set_name(test, "UNALIGNED_MODE");
        test->ifobj_tx->umem->unaligned_mode = true;
        test->ifobj_rx->umem->unaligned_mode = true;
        /* Let half of the packets straddle a buffer boundrary */
        pkt_stream_replace_half(test, PKT_SIZE,
                                XSK_UMEM__DEFAULT_FRAME_SIZE - 32);
	/* Populate fill ring with addresses in the packet stream */
        test->ifobj_rx->pkt_stream->use_addr_for_fill = true;
        testapp_validate_traffic(test);

        pkt_stream_restore_default(test);
	return true;
}

3 of the last 4 patches in the set add 3 new test suites, one for
unaligned mode, one for testing the rejection of tricky invalid
descriptors plus the acceptance of some valid ones in the Tx ring, and
one for testing 2K frame sizes (the default is 4K).

What is left to do for follow-up patches:

* Convert the statistics tests to the new framework.

* Implement a way of registering new tests without having the enum
  test_type. Once this has been done (together with the previous
  bullet), all the test types can be dropped from the header
  file. This means that we should be able to add tests by just writing
  a single function with a new test specification, which is one of the
  goals.

* Introduce functions for manipulating parts of the test or interface
  spec instead of direct manipulations such as
  test->ifobj_rx->pkt_stream->use_addr_for_fill = true; which is kind
  of awkward.

* Move the run-time and its interface to its own .c and .h files. Then
  we can have all the tests in a separate file.

* Better error reporting if a test fails. Today it does not state what
  test fails and might not continue execute the rest of the tests due
  to this failure. Failures are not propagated upwards through the
  functions so a failed test will also be a passed test, which messes
  up the stats counting. This needs to be changed.

* Add option to run specific test instead of all of them

* Introduce pacing of sent packets so that they are never dropped
  by the receiver even if it is stalled for some reason. If you run
  the current tests on a heavily loaded system, they might fail in SKB
  mode due to packets being dropped by the driver on Tx. Though I have
  never seen it, it might happen.

v1 -> v2:

* Fixed a number of spelling errors [Maciej]
* Fixed use after free bug in pkt_stream_replace() [Maciej]
* pkt_stream_set -> pkt_stream_generate_custom [Maciej]
* Fixed formatting problem in testapp_invalid_desc() [Maciej]
====================
Signed-off-by: NDaniel Borkmann <daniel@iogearbox.net>

Add tests for 2K frame size. Both a standard send and receive test and
one testing for invalid descriptors when the frame size is 2K.
Signed-off-by: NMagnus Karlsson <magnus.karlsson@intel.com>
Signed-off-by: NDaniel Borkmann <daniel@iogearbox.net>
Acked-by: NMaciej Fijalkowski <maciej.fijalkowski@intel.com>
Link: https://lore.kernel.org/bpf/20210907071928.9750-21-magnus.karlsson@gmail.com

Add tests for invalid xsk descriptors in the Tx ring. A number of
handcrafted nasty invalid descriptors are created and submitted to the
tx ring to check that they are validated correctly. Corner case valid
ones are also sent. The tests are run for both aligned and unaligned
mode.

pkt_stream_set() is introduced to be able to create a hand-crafted
packet stream where every single packet is specified in detail.
Signed-off-by: NMagnus Karlsson <magnus.karlsson@intel.com>
Signed-off-by: NDaniel Borkmann <daniel@iogearbox.net>
Acked-by: NMaciej Fijalkowski <maciej.fijalkowski@intel.com>
Link: https://lore.kernel.org/bpf/20210907071928.9750-20-magnus.karlsson@gmail.com

Eliminate a test specific if-statement for the RX_FILL_EMTPY stats
test that is present in the test runner. We can do this as we now have
the use_addr_for_fill option. Just create and empty Rx packet stream
and indicated that the test runner should use the addresses in that to
populate the fill ring. As there are no packets in the stream, the
fill ring will be empty and we will get the error stats that we want
to test.
Signed-off-by: NMagnus Karlsson <magnus.karlsson@intel.com>
Signed-off-by: NDaniel Borkmann <daniel@iogearbox.net>
Acked-by: NMaciej Fijalkowski <maciej.fijalkowski@intel.com>
Link: https://lore.kernel.org/bpf/20210907071928.9750-19-magnus.karlsson@gmail.com

Add a test for unaligned mode in which packet buffers can be placed
anywhere within the umem. Some packets are made to straddle page
boundaries in order to check for correctness. On the Tx side, buffers
are now allocated according to the addresses found in the packet
stream. Thus, the placement of buffers can be controlled with the
boolean use_addr_for_fill in the packet stream.

One new pkt_stream interface is introduced: pkt_stream_replace_half()
that replaces every other packet in the default packet stream with the
specified new packet. The constant DEFAULT_OFFSET is also
introduced. It specifies at what offset from the start of a chunk a Tx
packet is placed by the sending thread. This is just to be able to
test that it is possible to send packets at an offset not equal to
zero.
Signed-off-by: NMagnus Karlsson <magnus.karlsson@intel.com>
Signed-off-by: NDaniel Borkmann <daniel@iogearbox.net>
Acked-by: NMaciej Fijalkowski <maciej.fijalkowski@intel.com>
Link: https://lore.kernel.org/bpf/20210907071928.9750-18-magnus.karlsson@gmail.com

Introduce the concept of a default packet stream that is the set of
packets sent by most tests. Then add the ability to replace it for a
test that would like to send or receive something else through the use
of the function pkt_stream_replace() and then restored with
pkt_stream_restore_default(). These are then used to convert the
STAT_TEST_TX_INVALID to use these new APIs.
Signed-off-by: NMagnus Karlsson <magnus.karlsson@intel.com>
Signed-off-by: NDaniel Borkmann <daniel@iogearbox.net>
Acked-by: NMaciej Fijalkowski <maciej.fijalkowski@intel.com>
Link: https://lore.kernel.org/bpf/20210907071928.9750-17-magnus.karlsson@gmail.com

Allow for invalid packets to be sent. These are verified by the Rx
thread not to be received. Or put in another way, if they are
received, the test will fail. This feature will be used to eliminate
an if statement for a stats test and will also be used by other tests
in later patches. The previous code could only deal with valid
packets.
Signed-off-by: NMagnus Karlsson <magnus.karlsson@intel.com>
Signed-off-by: NDaniel Borkmann <daniel@iogearbox.net>
Acked-by: NMaciej Fijalkowski <maciej.fijalkowski@intel.com>
Link: https://lore.kernel.org/bpf/20210907071928.9750-16-magnus.karlsson@gmail.com

Remove the MAX_SOCKS define as it always will be one for the forseable
future and the code does not work for any other case anyway.
Signed-off-by: NMagnus Karlsson <magnus.karlsson@intel.com>
Signed-off-by: NDaniel Borkmann <daniel@iogearbox.net>
Acked-by: NMaciej Fijalkowski <maciej.fijalkowski@intel.com>
Link: https://lore.kernel.org/bpf/20210907071928.9750-15-magnus.karlsson@gmail.com

Make the pthread_t variables local scope instead of global. No reason
for them to be global.
Signed-off-by: NMagnus Karlsson <magnus.karlsson@intel.com>
Signed-off-by: NDaniel Borkmann <daniel@iogearbox.net>
Acked-by: NMaciej Fijalkowski <maciej.fijalkowski@intel.com>
Link: https://lore.kernel.org/bpf/20210907071928.9750-14-magnus.karlsson@gmail.com

Make xdp_flags and bind_flags local instead of global by moving them
into the interface object. These flags decide if the socket should be
created in SKB mode or in DRV mode and therefore they are sticky and
will survive a test_spec_reset. Since every test is first run in SKB
mode then in DRV mode, this change only happens once. With this
change, the configured_mode global variable can also be
erradicated. The first test_spec_init() also becomes superfluous and
can be eliminated.
Signed-off-by: NMagnus Karlsson <magnus.karlsson@intel.com>
Signed-off-by: NDaniel Borkmann <daniel@iogearbox.net>
Acked-by: NMaciej Fijalkowski <maciej.fijalkowski@intel.com>
Link: https://lore.kernel.org/bpf/20210907071928.9750-13-magnus.karlsson@gmail.com

Add the ability in the test specification to specify numbers of
sockets to create. The default is one socket. This is then used to
remove test specific if-statements around the bpf_res tests.
Signed-off-by: NMagnus Karlsson <magnus.karlsson@intel.com>
Signed-off-by: NDaniel Borkmann <daniel@iogearbox.net>
Acked-by: NMaciej Fijalkowski <maciej.fijalkowski@intel.com>
Link: https://lore.kernel.org/bpf/20210907071928.9750-12-magnus.karlsson@gmail.com

Replace the second_step global variable with a test specification
variable called total_steps that a test can be set to indicate how
many times the packet stream should be sent without reinitializing any
sockets. This eliminates test specific code in the test runner around
the bidirectional test.

The total_steps variable is 1 by default as most tests only need a
single round of packets.
Signed-off-by: NMagnus Karlsson <magnus.karlsson@intel.com>
Signed-off-by: NDaniel Borkmann <daniel@iogearbox.net>
Acked-by: NMaciej Fijalkowski <maciej.fijalkowski@intel.com>
Link: https://lore.kernel.org/bpf/20210907071928.9750-11-magnus.karlsson@gmail.com

Introduce rx_on and tx_on in the ifobject so that we can describe if
the thread should create a socket with only tx, rx, or both. This
eliminates some test specific if statements from the code. We can also
eliminate the flow vector structure now as this is fully specified
by the tx_on and rx_on variables.
Signed-off-by: NMagnus Karlsson <magnus.karlsson@intel.com>
Signed-off-by: NDaniel Borkmann <daniel@iogearbox.net>
Acked-by: NMaciej Fijalkowski <maciej.fijalkowski@intel.com>
Link: https://lore.kernel.org/bpf/20210907071928.9750-10-magnus.karlsson@gmail.com

Add a use_poll option to the ifobject so that we do not need to use a
test specific if-statement in the test runner.
Signed-off-by: NMagnus Karlsson <magnus.karlsson@intel.com>
Signed-off-by: NDaniel Borkmann <daniel@iogearbox.net>
Acked-by: NMaciej Fijalkowski <maciej.fijalkowski@intel.com>
Link: https://lore.kernel.org/bpf/20210907071928.9750-9-magnus.karlsson@gmail.com

Introduce the test name in the test specification. This so we can set
the name locally in the test function and simplify the logic for
printing out test results.
Signed-off-by: NMagnus Karlsson <magnus.karlsson@intel.com>
Signed-off-by: NDaniel Borkmann <daniel@iogearbox.net>
Acked-by: NMaciej Fijalkowski <maciej.fijalkowski@intel.com>
Link: https://lore.kernel.org/bpf/20210907071928.9750-8-magnus.karlsson@gmail.com

Make the frame size configurable instead of it being hard coded to a
default. This is a property of the umem and will make it possible to
implement tests for different umem frame sizes in a later patch.
Signed-off-by: NMagnus Karlsson <magnus.karlsson@intel.com>
Signed-off-by: NDaniel Borkmann <daniel@iogearbox.net>
Acked-by: NMaciej Fijalkowski <maciej.fijalkowski@intel.com>
Link: https://lore.kernel.org/bpf/20210907071928.9750-7-magnus.karlsson@gmail.com

Move the global variable rxqsize to struct xsk_socket_info as it
describes the size of a ring in that struct. By default, it is set to
the size dictated by libbpf.
Signed-off-by: NMagnus Karlsson <magnus.karlsson@intel.com>
Signed-off-by: NDaniel Borkmann <daniel@iogearbox.net>
Acked-by: NMaciej Fijalkowski <maciej.fijalkowski@intel.com>
Link: https://lore.kernel.org/bpf/20210907071928.9750-6-magnus.karlsson@gmail.com

Move the global variables num_frames and frame_headroom to struct
xsk_umem_info. They describe properties of the umem so no reason for
them to be global.
Signed-off-by: NMagnus Karlsson <magnus.karlsson@intel.com>
Signed-off-by: NDaniel Borkmann <daniel@iogearbox.net>
Acked-by: NMaciej Fijalkowski <maciej.fijalkowski@intel.com>
Link: https://lore.kernel.org/bpf/20210907071928.9750-5-magnus.karlsson@gmail.com

Introduce a test specification to be able to concisely describe a
test. Currently, a test is implemented by sprinkling test specific if
statements here and there, which is not scalable or easy to
understand. The end goal with this patch set is to come to the point
in which a test is completely specified by a test specification that
can easily be constructed in a single function so that new tests can
be added without too much trouble. This test specification will be run
by a test runner that has no idea about tests. It just executes the
what test specification states.

This patch introduces the test specification and, as a start, puts the
two interface objects in there, one containing the packet stream to be
sent and the other one the packet stream that is supposed to be
received for a test to pass. The global variables containing these can
then be eliminated. The following patches will convert each existing
test into a test specification and add the needed fields into it and
the functionality in the test runner that act on the test
specification. At the end, the test runner should contain no test
specific code and each test should be described in a single simple
function.
Signed-off-by: NMagnus Karlsson <magnus.karlsson@intel.com>
Signed-off-by: NDaniel Borkmann <daniel@iogearbox.net>
Acked-by: NMaciej Fijalkowski <maciej.fijalkowski@intel.com>
Link: https://lore.kernel.org/bpf/20210907071928.9750-4-magnus.karlsson@gmail.com

Introduce a typedef of the thread function so this can be passed to
init_iface() in order to simplify that function.
Signed-off-by: NMagnus Karlsson <magnus.karlsson@intel.com>
Signed-off-by: NDaniel Borkmann <daniel@iogearbox.net>
Acked-by: NMaciej Fijalkowski <maciej.fijalkowski@intel.com>
Link: https://lore.kernel.org/bpf/20210907071928.9750-3-magnus.karlsson@gmail.com

Simplify the xsk_info and umem_info allocation by allocating them
upfront in an array, instead of allocating an array of pointers to
future creations of these. Allocating them upfront also has the
advantage that configuration information can be stored in these
structures instead of relying on global variables. With the previous
structure, xsk_info and umem_info were created too late to be able to
store most configuration information. This will be used to eliminate
most global variables in later patches in this series.
Signed-off-by: NMagnus Karlsson <magnus.karlsson@intel.com>
Signed-off-by: NDaniel Borkmann <daniel@iogearbox.net>
Acked-by: NMaciej Fijalkowski <maciej.fijalkowski@intel.com>
Link: https://lore.kernel.org/bpf/20210907071928.9750-2-magnus.karlsson@gmail.com

Introduce a macro LIBBPF_DEPRECATED_SINCE(major, minor, message) to prepare
the deprecation of two API functions. This macro marks functions as deprecated
when libbpf's version reaches the values passed as an argument.

As part of this change libbpf_version.h header is added with recorded major
(LIBBPF_MAJOR_VERSION) and minor (LIBBPF_MINOR_VERSION) libbpf version macros.
They are now part of libbpf public API and can be relied upon by user code.
libbpf_version.h is installed system-wide along other libbpf public headers.

Due to this new build-time auto-generated header, in-kernel applications
relying on libbpf (resolve_btfids, bpftool, bpf_preload) are updated to
include libbpf's output directory as part of a list of include search paths.
Better fix would be to use libbpf's make_install target to install public API
headers, but that clean up is left out as a future improvement. The build
changes were tested by building kernel (with KBUILD_OUTPUT and O= specified
explicitly), bpftool, libbpf, selftests/bpf, and resolve_btfids builds. No
problems were detected.

Note that because of the constraints of the C preprocessor we have to write
a few lines of macro magic for each version used to prepare deprecation (0.6
for now).

Also, use LIBBPF_DEPRECATED_SINCE() to schedule deprecation of
btf__get_from_id() and btf__load(), which are replaced by
btf__load_from_kernel_by_id() and btf__load_into_kernel(), respectively,
starting from future libbpf v0.6. This is part of libbpf 1.0 effort ([0]).

  [0] Closes: https://github.com/libbpf/libbpf/issues/278Co-developed-by: NQuentin Monnet <quentin@isovalent.com>
Co-developed-by: NAndrii Nakryiko <andrii@kernel.org>
Signed-off-by: NQuentin Monnet <quentin@isovalent.com>
Signed-off-by: NAndrii Nakryiko <andrii@kernel.org>
Signed-off-by: NDaniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20210908213226.1871016-1-andrii@kernel.org

After updating to binutils 2.35, the build began to fail with an
assembler error. A bug was opened on the Red Hat Bugzilla a few days
later for the same issue.

Work around the problem by using the new `symver` attribute (introduced
in GCC 10) as needed instead of assembler directives.

This addresses Red Hat ([0]) and OpenSUSE ([1]) bug reports, as well as libbpf
issue ([2]).

  [0]: https://bugzilla.redhat.com/show_bug.cgi?id=1863059
  [1]: https://bugzilla.opensuse.org/show_bug.cgi?id=1188749
  [2]: Closes: https://github.com/libbpf/libbpf/issues/338Co-developed-by: NPatrick McCarty <patrick.mccarty@intel.com>
Co-developed-by: NMichal Suchanek <msuchanek@suse.de>
Signed-off-by: NPatrick McCarty <patrick.mccarty@intel.com>
Signed-off-by: NMichal Suchanek <msuchanek@suse.de>
Signed-off-by: NAndrii Nakryiko <andrii@kernel.org>
Signed-off-by: NAlexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20210907221023.2660953-1-andrii@kernel.org

Matt Smith says:

====================

This patch series changes the type of bpf_object_skeleton->data
to const void * and provides a helper method X__elf_bytes(size_t *sz)
for accessing the raw binary data of the compiled embedded BPF object.

The type change enforces the previously implied behavior of immutability
for this field while casting it to (void *) before assignment allows
for compiling with previous versions of the libbpf headers without
compiler warnings.

The helper method allows easier access to the BPF binary object data
and is leveraged to populate the skeleton field.  The inclusion of
this helper method will allow users to get access to the data without
needing to populate an entire skeleton first.

Checks are added in the third patch to validate the behavior of the
added method
====================
Signed-off-by: NAndrii Nakryiko <andrii@kernel.org>

This patch adds two checks for the X__elf_bytes BPF skeleton helper
method. The first asserts that the pointer returned from the helper
method is valid, the second asserts that the provided size pointer is
set.
Signed-off-by: NMatt Smith <alastorze@fb.com>
Signed-off-by: NAndrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20210901194439.3853238-4-alastorze@fb.com

This adds a skeleton method X__elf_bytes() which returns the binary data of
the compiled and embedded BPF object file. It additionally sets the size of
the return data to the provided size_t pointer argument.

The assignment to s->data is cast to void * to ensure no warning is issued if
compiled with a previous version of libbpf where the bpf_object_skeleton field
is void * instead of const void *
Signed-off-by: NMatt Smith <alastorze@fb.com>
Signed-off-by: NAndrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20210901194439.3853238-3-alastorze@fb.com

This change was necessary to enforce the implied contract
that bpf_object_skeleton->data should not be mutated.  The data
will be cast to `void *` during assignment to handle the case
where a user is compiling with older libbpf headers to avoid
a compiler warning of `const void *` data being cast to `void *`
Signed-off-by: NMatt Smith <alastorze@fb.com>
Signed-off-by: NAndrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20210901194439.3853238-2-alastorze@fb.com

If libbpf encounters an ELF file that has been stripped of its symbol
table, it will crash in bpf_object__add_programs() when trying to
dereference the obj->efile.symbols pointer.

Fix this by erroring out of bpf_object__elf_collect() if it is not able
able to find the symbol table.

v2:
  - Move check into bpf_object__elf_collect() and add nice error message

Fixes: 6245947c ("libbpf: Allow gaps in BPF program sections to support overriden weak functions")
Signed-off-by: NToke Høiland-Jørgensen <toke@redhat.com>
Signed-off-by: NAndrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20210901114812.204720-1-toke@redhat.com

bpf_prog_test_run_xattr takes a struct __sk_buff, but did not permit
that __skbuff to include an nonzero ingress_ifindex.

This patch updates to allow ingress_ifindex, convert the __sk_buff field to
sk_buff (skb_iif) and back, and tests that the value is present from on BPF
program side. The test sets an unlikely distinct value for ingress_ifindex
(11) from ifindex (1), which is in line with the rest of the synthetic field
tests.

Adding this support allows testing BPF that operates differently on
incoming and outgoing skbs by discriminating on this field.
Signed-off-by: NNeil Spring <ntspring@fb.com>
Signed-off-by: NAndrii Nakryiko <andrii@kernel.org>
Acked-by: NJohn Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/bpf/20210831033356.1459316-1-ntspring@fb.com

Merge tag 'perf-tools-for-v5.15-2021-09-04' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux

Pull perf tool updates from Arnaldo Carvalho de Melo:
 "New features:

   - Improvements for the flamegraph python script, including:
       - Display perf.data header
       - Display PIDs of user stacks
       - Added option to change color scheme
       - Default to blue/green color scheme to improve accessibility
       - Correctly identify kernel stacks when debuginfo is available

   - Improvements for 'perf bench futex':
       - Add --mlockall parameter
       - Add --broadcast and --pi to the 'requeue' sub benchmark

   - Add support for PMU aliases.

   - Introduce an ARM Coresight ETE decoder.

   - Add a 'perf bench' entry for evlist open/close operations, to help
     quantify improvements with multithreading 'perf record'.

   - Allow reporting the [un]throttle PERF_RECORD_ meta event in 'perf
     script's python scripting.

   - Add a 'perf test' entry for PMU aliases.

   - Add a 'perf test' entry for 'perf record/perf report/perf script'
     pipe mode.

  Fixes:

   - perf script dlfilter (API for filtering via dynamically loaded
     shared object introduced in v5.14) fixes and a 'perf test' entry
     for it.

   - Fix get_current_dir_name() compilation on Android.

   - Fix issues with asciidoc and double dashes uses.

   - Fix memory leaks in the BTF handling code.

   - Fix leftover problems in the Documentation from the infrastructure
     originally lifted from the git codebase.

   - Fix *probe_vfs_getname.sh 'perf test' failures.

   - Handle fd gaps in 'perf test's test__dso_data_reopen().

   - Make sure to show disasembly warnings for 'perf annotate --stdio'.

   - Fix output from pipe to file and vice-versa in 'perf
     record/report/script'.

   - Correct 'perf data -h' output.

   - Fix wrong comm in system-wide mode with 'perf record --delay'.

   - Do not allow --for-each-cgroup without cpu in 'perf stat'

   - Make 'perf test --skip' work on shell tests.

   - Fix libperf's verbose printing.

  Misc improvements:

   - Preparatory patches for multithreading various 'perf record' phases
     (synthesizing, opening, recording, etc).

   - Add sparse context/locking annotations in compiler-types.h, also to
     help with the multithreading effort.

   - Optimize the generation of the arch specific erno tables used in
     'perf trace'.

   - Optimize libperf's perf_cpu_map__max().

   - Improve ARM's CoreSight warnings.

   - Report collisions in AUX records.

   - Improve warnings for the LLVM 'perf test' entry.

   - Improve the PMU events 'perf test' codebase.

   - perf test: Do not compare overheads in the zstd comp test

   - Better support annotation on ARM.

   - Update 'perf trace's cmd string table to decode sys_bpf() first
     arg.

  Vendor events:

   - Add JSON events and metrics for Intel's Ice Lake, Tiger Lake and
     Elhart Lake.

   - Update JSON eventsand metrics for Intel's Cascade Lake and Sky Lake
     servers.

  Hardware tracing:

   - Improvements for the ARM hardware tracing auxtrace support"

* tag 'perf-tools-for-v5.15-2021-09-04' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux: (130 commits)
  perf tests: Add test for PMU aliases
  perf pmu: Add PMU alias support
  perf session: Report collisions in AUX records
  perf script python: Allow reporting the [un]throttle PERF_RECORD_ meta event
  perf build: Report failure for testing feature libopencsd
  perf cs-etm: Show a warning for an unknown magic number
  perf cs-etm: Print the decoder name
  perf cs-etm: Create ETE decoder
  perf cs-etm: Update OpenCSD decoder for ETE
  perf cs-etm: Fix typo
  perf cs-etm: Save TRCDEVARCH register
  perf cs-etm: Refactor out ETMv4 header saving
  perf cs-etm: Initialise architecture based on TRCIDR1
  perf cs-etm: Refactor initialisation of decoder params.
  tools build: Fix feature detect clean for out of source builds
  perf evlist: Add evlist__for_each_entry_from() macro
  perf evsel: Handle precise_ip fallback in evsel__open_cpu()
  perf evsel: Move bpf_counter__install_pe() to success path in evsel__open_cpu()
  perf evsel: Move test_attr__open() to success path in evsel__open_cpu()
  perf evsel: Move ignore_missing_thread() to fallback code
  ...