commit 21fb9f0d ("Input: twl6040-vibra - use system workqueue")

says that it switches to use the system workqueue but it did neither

- remove the workqueue struct variable
- replace code to really use the system workqueue

Instead it calls queue_work() on uninitialized info->workqueue.

The result is a NULL pointer dereference in vibra_play().

Solution: use schedule_work
Signed-off-by: NH. Nikolaus Schaller <hns@goldelico.com>
Signed-off-by: NDmitry Torokhov <dmitry.torokhov@gmail.com>

The trigger delay algorithm that converts from microseconds to
the register value looks incorrect. According to most of the PMIC
documentation, the equation is

	delay (Seconds) = (1 / 1024) * 2 ^ (x + 4)

except for one case where the documentation looks to have a
formatting issue and the equation looks like

	delay (Seconds) = (1 / 1024) * 2 x + 4

Most likely this driver was written with the improper
documentation to begin with. According to the downstream sources
the valid delays are from 2 seconds to 1/64 second, and the
latter equation just doesn't make sense for that. Let's fix the
algorithm and the range check to match the documentation and the
downstream sources.
Reported-by: NBjorn Andersson <bjorn.andersson@linaro.org>
Fixes: 92d57a73 ("input: Add support for Qualcomm PMIC8XXX power key")
Signed-off-by: NStephen Boyd <sboyd@codeaurora.org>
Tested-by: NJohn Stultz <john.stultz@linaro.org>
Acked-by: NBjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: NDmitry Torokhov <dmitry.torokhov@gmail.com>

We shouldn't assign the parent device of the input_dev to be the
parent MFD device, because this will be used for devres which causes
input_unregister_device to run after the haptics device has been
removed, since it is itself a child of the MFD device. The default
of using the haptics device itself as the parent is correct.
Signed-off-by: NCharles Keepax <ckeepax@opensource.wolfsonmicro.com>
Signed-off-by: NDmitry Torokhov <dmitry.torokhov@gmail.com>

This explicitly states behavior we already use for some touchpads and
tablet devices.
Signed-off-by: NPeter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: NDmitry Torokhov <dmitry.torokhov@gmail.com>

This adds the VID/PID combination for the Xbox One version of the Mad
Catz FightStick TE 2.

The functionality that this provides is about on par with what the
Windows drivers for the stick manage to deliver.

What works:
- Digital stick
- 6 main buttons
- Xbox button
- The two buttons on the back
- The locking buttons (preventing accidental Xbox button press)

What doesn't work:
- Two of the main buttons (don't work on Windows either)
- The "Haptic" button setting does not have an effect (not sure if it
  works on Windows)

I added the MAP_TRIGGERS_TO_BUTTONS option but in my (limited) testing
there was no practical difference with or without. The FightStick does
not have triggers though so adding it makes sense.
Signed-off-by: NSilvan Jegen <s.jegen@gmail.com>
Signed-off-by: NDmitry Torokhov <dmitry.torokhov@gmail.com>

The gtco driver expects at least one valid endpoint. If given malicious
descriptors that specify 0 for the number of endpoints, it will crash in
the probe function. Ensure there is at least one endpoint on the interface
before using it.

Also let's fix a minor coding style issue.

The full correct report of this issue can be found in the public
Red Hat Bugzilla:

https://bugzilla.redhat.com/show_bug.cgi?id=1283385Reported-by: NRalf Spenneberg <ralf@spenneberg.net>
Signed-off-by: NVladis Dronov <vdronov@redhat.com>
Cc: stable@vger.kernel.org
Signed-off-by: NDmitry Torokhov <dmitry.torokhov@gmail.com>

During the initialisation the driver uses a buffer on the stack for DMA.
That violates the cache coherency rules. The fix is to allocate the buffer
with kmalloc().
Signed-off-by: NOliver Neukum <ONeukum@suse.com>
Signed-off-by: NDmitry Torokhov <dmitry.torokhov@gmail.com>

The ati_remote2 driver expects at least two interfaces with one
endpoint each. If given malicious descriptor that specify one
interface or no endpoints, it will crash in the probe function.
Ensure there is at least two interfaces and one endpoint for each
interface before using it.

The full disclosure: http://seclists.org/bugtraq/2016/Mar/90Reported-by: NRalf Spenneberg <ralf@spenneberg.net>
Signed-off-by: NVladis Dronov <vdronov@redhat.com>
Cc: stable@vger.kernel.org
Signed-off-by: NDmitry Torokhov <dmitry.torokhov@gmail.com>

Looks like the fimware 8.2 still has the extra buttons spurious release
bug.

Link: https://bugzilla.kernel.org/show_bug.cgi?id=114321
Cc: stable@vger.kernel.org
Signed-off-by: NBenjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: NDmitry Torokhov <dmitry.torokhov@gmail.com>

Originally the irq_mask member of rmi_function was a pointer. Then it was
switched to being a zero length array. However, the checks for a NULL
pointer where not removed.
Signed-off-by: NAndrew Duggan <aduggan@synaptics.com>
Signed-off-by: NDmitry Torokhov <dmitry.torokhov@gmail.com>

The Windows driver's settings dialog contains a visualization of the
regions for the hardware edge scrolling capability, which uses a
temporarily-enabled limited-resolution absolute mode.

This patch enables this during normal operation, and combines the
absolute packets with the existing relative packets to provide
accurate absolute position and touch reporting.

It also adds documentation for all known gesture packets and
initialization commands.
Reviewed-by: NChris Diamand <chris@diamand.org>
Signed-off-by: NRichard Pospesel <pospeselr@gmail.com>
Signed-off-by: NDmitry Torokhov <dmitry.torokhov@gmail.com>

A malicious device missing interface can make the driver oops.
Add sanity checking.
Signed-off-by: NOliver Neukum <ONeukum@suse.com>
CC: stable@vger.kernel.org
Signed-off-by: NDmitry Torokhov <dmitry.torokhov@gmail.com>

Add hw_version sysfs attribute for retrieving hardware information
from firmware.
Signed-off-by: NSangwon Jee <jeesw@melfas.com>
Signed-off-by: NDmitry Torokhov <dmitry.torokhov@gmail.com>

gcc-6.0 notices that the use of the property_entry in this file that
was recently introduced cannot work right, as we initialize the wrong
field:

raumfeld.c:387:3: error: the address of 'raumfeld_rotary_encoder_steps' will always evaluate as 'true' [-Werror=address]
   DEV_PROP_U32, 1, &raumfeld_rotary_encoder_steps, },
   ^~~~~~~~~~~~
raumfeld.c:389:3: error: the address of 'raumfeld_rotary_encoder_axis' will always evaluate as 'true' [-Werror=address]
   DEV_PROP_U32, 1, &raumfeld_rotary_encoder_axis, },
   ^~~~~~~~~~~~
raumfeld.c:391:3: error: the address of 'raumfeld_rotary_encoder_relative_axis' will always evaluate as 'true' [-Werror=address]
   DEV_PROP_U32, 1, &raumfeld_rotary_encoder_relative_axis, },
   ^~~~~~~~~~~~

The problem appears to stem from relying on an old definition of
'struct property', but it has changed several times since the code
could have last been correct.

This changes the code to use the PROPERTY_ENTRY_INTEGER() macro instead,
which works fine for the current definition and is a safer way of doing
the initialization.
Signed-off-by: NArnd Bergmann <arnd@arndb.de>
Fixes: a9e340dc ("Input: rotary_encoder - move away from platform data structure")
Signed-off-by: NDmitry Torokhov <dmitry.torokhov@gmail.com>

Merge with Linux 4.5 to get PROPERTY_ENTRY_INTEGER() that is needed to
fix pxa/raumfeld rotary encoder properties.

There is a typo so we have && instead of &.

Fixes: ff8f8370 ('Input: synaptics-rmi4 - add support for 2D sensors and F11')
Signed-off-by: NDan Carpenter <dan.carpenter@oracle.com>
Acked-by: NAndrew Duggan <aduggan@synaptics.com>
Signed-off-by: NDmitry Torokhov <dmitry.torokhov@gmail.com>

The powermate driver expects at least one valid USB endpoint in its
probe function.  If given malicious descriptors that specify 0 for
the number of endpoints, it will crash.  Validate the number of
endpoints on the interface before using them.

The full report for this issue can be found here:
http://seclists.org/bugtraq/2016/Mar/85Reported-by: NRalf Spenneberg <ralf@spenneberg.net>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: NJosh Boyer <jwboyer@fedoraproject.org>
Signed-off-by: NDmitry Torokhov <dmitry.torokhov@gmail.com>

Pull MIPS fixes from Ralf Baechle:
 "Another round of MIPS fixes for 4.5:

   - Fix JZ4780 build with DEBUG_ZBOOT and MACH_JZ4780
   - Fix build with DEBUG_ZBOOT and MACH_JZ4780
   - Fix issue with uninitialised temp_foreign_map
   - Fix awk regex compile failure with certain versions of awk.  At
     this time, the sole user, ld-ifversion, is only used on MIPS"

* 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus:
  MIPS: smp.c: Fix uninitialised temp_foreign_map
  MIPS: Fix build error when SMP is used without GIC
  ld-version: Fix awk regex compile failure
  MIPS: Fix build with DEBUG_ZBOOT and MACH_JZ4780

When calculate_cpu_foreign_map() recalculates the cpu_foreign_map
cpumask it uses the local variable temp_foreign_map without initialising
it to zero. Since the calculation only ever sets bits in this cpumask
any existing bits at that memory location will remain set and find their
way into cpu_foreign_map too. This could potentially lead to cache
operations suboptimally doing smp calls to multiple VPEs in the same
core, even though the VPEs share primary caches.

Therefore initialise temp_foreign_map using cpumask_clear() before use.

Fixes: cccf34e9 ("MIPS: c-r4k: Fix cache flushing for MT cores")
Signed-off-by: NJames Hogan <james.hogan@imgtec.com>
Cc: Paul Burton <paul.burton@imgtec.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/12759/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

The MIPS_GIC_IPI should only be selected when MIPS_GIC is also
selected, otherwise it results in a compile error. smp-gic.c uses some
functions from include/linux/irqchip/mips-gic.h like
plat_ipi_call_int_xlate() which are only added to the header file when
MIPS_GIC is set. The Lantiq SoC does not use the GIC, but supports SMP.
The calls top the functions from smp-gic.c are already protected by
some #ifdefs

The first part of this was introduced in commit 72e20142 ("MIPS:
Move GIC IPI functions out of smp-cmp.c")
Signed-off-by: NHauke Mehrtens <hauke@hauke-m.de>
Cc: Paul Burton <paul.burton@imgtec.com>
Cc: stable@vger.kernel.org # v3.15+
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/12774/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

The ld-version.sh script fails on some versions of awk with the
following error, resulting in build failures for MIPS:

awk: scripts/ld-version.sh: line 4: regular expression compile failed (missing '(')

This is due to the regular expression ".*)", meant to strip off the
beginning of the ld version string up to the close bracket, however
brackets have a meaning in regular expressions, so lets escape it so
that awk doesn't expect a corresponding open bracket.

Fixes: ccbef167 ("Kbuild, lto: add ld-version and ld-ifversion ...")
Reported-by: NGeert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: NJames Hogan <james.hogan@imgtec.com>
Tested-by: NMichael S. Tsirkin <mst@redhat.com>
Acked-by: NMichael S. Tsirkin <mst@redhat.com>
Tested-by: NSudip Mukherjee <sudip.mukherjee@codethink.co.uk>
Cc: Michal Marek <mmarek@suse.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: linux-mips@linux-mips.org
Cc: linux-kbuild@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Cc: stable@vger.kernel.org # 4.4.x-
Patchwork: https://patchwork.linux-mips.org/patch/12838/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

Ingenic SoC declares ZBOOT support, but debug definitions are missing
for MACH_JZ4780 resulting in a build failure when DEBUG_ZBOOT is set.
The UART addresses are same as with JZ4740, so fix by covering JZ4780
with those as well.
Signed-off-by: NAaro Koskinen <aaro.koskinen@iki.fi>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/12830/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

Pull block merge fix from Jens Axboe.

This fixes the block segment counting bug and resulting sg overrun
reported by Kent Overstreet, introduced with the last block pull.

* 'for-linus' of git://git.kernel.dk/linux-block:
  block: don't optimize for non-cloned bio in bio_get_last_bvec()

Pull x86 fixes from Ingo Molnar:
 "This fixes 3 FPU handling related bugs, an EFI boot crash and a
  runtime warning.

  The EFI fix arrived late but I didn't want to delay it to after v4.5
  because the effects are pretty bad for the systems that are affected
  by it"

[ Actually, I don't think the EFI fix really matters yet, because we
  haven't switched to the separate EFI page tables in mainline yet ]

* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/efi: Fix boot crash by always mapping boot service regions into new EFI page tables
  x86/fpu: Fix eager-FPU handling on legacy FPU machines
  x86/delay: Avoid preemptible context checks in delay_mwaitx()
  x86/fpu: Revert ("x86/fpu: Disable AVX when eagerfpu is off")
  x86/fpu: Fix 'no387' regression

Pull SCSI target bug fix from Nicholas Bellinger:
 "Here is an outstanding target-core bug-fix for v4.5 code."

  This patch addresses a recent Task Management (TMR) regression related
  to larger set of multi-port LUN_RESET bug-fixes in v4.5-rc5.

  It drops a left-over target_put_sess_cmd() of se_cmd->cmd_kref within
  ABORT_TASK failure path, once a se_cmd descriptor has already
  completed posting response to fabric driver logic, and must be skipped
  during normal ABORT_TASK se_cmd->tag lookup"

* git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending:
  target: Drop incorrect ABORT_TASK put for completed commands

For !BIO_CLONED bio, we can use .bi_vcnt safely, but it
doesn't mean we can just simply return .bi_io_vec[.bi_vcnt - 1]
because the start postion may have been moved in the middle of
the bvec, such as splitting in the middle of bvec.

Fixes: 7bcd79ac(block: bio: introduce helpers to get the 1st and last bvec)
Cc: stable@vger.kernel.org
Reported-by: NKent Overstreet <kent.overstreet@gmail.com>
Signed-off-by: NMing Lei <ming.lei@canonical.com>
Signed-off-by: NJens Axboe <axboe@fb.com>

Some machines have EFI regions in page zero (physical address
0x00000000) and historically that region has been added to the e820
map via trim_bios_range(), and ultimately mapped into the kernel page
tables. It was not mapped via efi_map_regions() as one would expect.

Alexis reports that with the new separate EFI page tables some boot
services regions, such as page zero, are not mapped. This triggers an
oops during the SetVirtualAddressMap() runtime call.

For the EFI boot services quirk on x86 we need to memblock_reserve()
boot services regions until after SetVirtualAddressMap(). Doing that
while respecting the ownership of regions that may have already been
reserved by the kernel was the motivation behind this commit:

  7d68dc3f ("x86, efi: Do not reserve boot services regions within reserved areas")

That patch was merged at a time when the EFI runtime virtual mappings
were inserted into the kernel page tables as described above, and the
trick of setting ->numpages (and hence the region size) to zero to
track regions that should not be freed in efi_free_boot_services()
meant that we never mapped those regions in efi_map_regions(). Instead
we were relying solely on the existing kernel mappings.

Now that we have separate page tables we need to make sure the EFI
boot services regions are mapped correctly, even if someone else has
already called memblock_reserve(). Instead of stashing a tag in
->numpages, set the EFI_MEMORY_RUNTIME bit of ->attribute. Since it
generally makes no sense to mark a boot services region as required at
runtime, it's pretty much guaranteed the firmware will not have
already set this bit.

For the record, the specific circumstances under which Alexis
triggered this bug was that an EFI runtime driver on his machine was
responding to the EVT_SIGNAL_VIRTUAL_ADDRESS_CHANGE event during
SetVirtualAddressMap().

The event handler for this driver looks like this,

  sub rsp,0x28
  lea rdx,[rip+0x2445] # 0xaa948720
  mov ecx,0x4
  call func_aa9447c0  ; call to ConvertPointer(4, & 0xaa948720)
  mov r11,QWORD PTR [rip+0x2434] # 0xaa948720
  xor eax,eax
  mov BYTE PTR [r11+0x1],0x1
  add rsp,0x28
  ret

Which is pretty typical code for an EVT_SIGNAL_VIRTUAL_ADDRESS_CHANGE
handler. The "mov r11, QWORD PTR [rip+0x2424]" was the faulting
instruction because ConvertPointer() was being called to convert the
address 0x0000000000000000, which when converted is left unchanged and
remains 0x0000000000000000.

The output of the oops trace gave the impression of a standard NULL
pointer dereference bug, but because we're accessing physical
addresses during ConvertPointer(), it wasn't. EFI boot services code
is stored at that address on Alexis' machine.
Reported-by: NAlexis Murzeau <amurzeau@gmail.com>
Signed-off-by: NMatt Fleming <matt@codeblueprint.co.uk>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Ben Hutchings <ben@decadent.org.uk>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Maarten Lankhorst <maarten.lankhorst@canonical.com>
Cc: Matthew Garrett <mjg59@srcf.ucam.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Raphael Hertzog <hertzog@debian.org>
Cc: Roger Shimizu <rogershimizu@gmail.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-efi@vger.kernel.org
Link: http://lkml.kernel.org/r/1457695163-29632-2-git-send-email-matt@codeblueprint.co.uk
Link: https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=815125Signed-off-by: NIngo Molnar <mingo@kernel.org>

i486 derived cores like Intel Quark support only the very old,
legacy x87 FPU (FSAVE/FRSTOR, CPUID bit FXSR is not set), and
our FPU code wasn't handling the saving and restoring there
properly in the 'eagerfpu' case.

So after we made eagerfpu the default for all CPU types:

  58122bf1 x86/fpu: Default eagerfpu=on on all CPUs

these old FPU designs broke. First, Andy Shevchenko reported a splat:

  WARNING: CPU: 0 PID: 823 at arch/x86/include/asm/fpu/internal.h:163 fpu__clear+0x8c/0x160

which was us trying to execute FXRSTOR on those machines even though
they don't support it.

After taking care of that, Bryan O'Donoghue reported that a simple FPU
test still failed because we weren't initializing the FPU state properly
on those machines.

Take care of all that.
Reported-and-tested-by: NBryan O'Donoghue <pure.logic@nexus-software.ie>
Reported-by: NAndy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: NBorislav Petkov <bp@suse.de>
Acked-by: NLinus Torvalds <torvalds@linux-foundation.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Quentin Casasnovas <quentin.casasnovas@oracle.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Yu-cheng <yu-cheng.yu@intel.com>
Link: http://lkml.kernel.org/r/20160311113206.GD4312@pd.tnicSigned-off-by: NIngo Molnar <mingo@kernel.org>

On error syscon_regmap_lookup_by_phandle() returns ERR_PTR() value,
which makes a check for NULL invalid and may lead to oops on error
path.
Signed-off-by: NVladimir Zapolskiy <vz@mleia.com>
Signed-off-by: NDmitry Torokhov <dmitry.torokhov@gmail.com>

Pull MTD fixes from Brian Norris:
 "Late MTD fix for v4.5:

   - A simple error code handling fix for the NAND ECC test; this was a
     regression in v4.5-rc1

   - A MAINTAINERS update, which might as well go in ASAP"

* tag 'for-linus-20160311' of git://git.infradead.org/linux-mtd:
  MAINTAINERS: add a maintainer for the NAND subsystem
  mtd: nand: tests: fix regression introduced in mtd_nandectest

Pull drm/i915 fixes from Dave Airlie:
 "Just two i915 regression fixes, that should be it from me"

* 'drm-fixes' of git://people.freedesktop.org/~airlied/linux:
  drm/i915: Actually retry with bit-banging after GMBUS timeout
  drm/i915: Fix bogus dig_port_map[] assignment for pre-HSW

When removing an element from the mempool, mark it as unpoisoned in KASAN
before verifying its contents for SLUB/SLAB debugging.  Otherwise KASAN
will flag the reads checking the element use-after-free writes as
use-after-free reads.
Signed-off-by: NMatthew Dawson <matthew@mjdsystems.ca>
Acked-by: NAndrey Ryabinin <aryabinin@virtuozzo.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Pull ARM SoC fixes from Olof Johansson:
 "Two more fixes for 4.5:

   - One is a fix for OMAP that is urgently needed to avoid DRA7xx chips
     from premature aging, by always keeping the Ethernet clock enabled.

   - The other solves a I/O memory layout issue on Armada, where SROM
     and PCI memory windows were conflicting in some configurations"

* tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc:
  ARM: mvebu: fix overlap of Crypto SRAM with PCIe memory window
  ARM: dts: dra7: do not gate cpsw clock due to errata i877
  ARM: OMAP2+: hwmod: Introduce ti,no-idle dt property

Pull media fix from Mauro Carvalho Chehab:
 "One last time fix: It adds a code that prevents some media tools like
  media-ctl to hide some entities that have their IDs out of the range
  expected by those apps"

* tag 'media/v4.5-5' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media:
  [media] media-device: map new functions into old types for legacy API

When the Crypto SRAM mappings were added to the Device Tree files
describing the Armada XP boards in commit c466d997 ("ARM: mvebu:
define crypto SRAM ranges for all armada-xp boards"), the fact that
those mappings were overlaping with the PCIe memory aperture was
overlooked. Due to this, we currently have for all Armada XP platforms
a situation that looks like this:

Memory mapping on Armada XP boards with internal registers at
0xf1000000:

 - 0x00000000 -> 0xf0000000	3.75G 	RAM
 - 0xf0000000 -> 0xf1000000	16M	NOR flashes (AXP GP / AXP DB)
 - 0xf1000000 -> 0xf1100000	1M	internal registers
 - 0xf8000000 -> 0xffe0000	126M	PCIe memory aperture
 - 0xf8100000 -> 0xf8110000	64KB	Crypto SRAM #0	=> OVERLAPS WITH PCIE !
 - 0xf8110000 -> 0xf8120000	64KB	Crypto SRAM #1	=> OVERLAPS WITH PCIE !
 - 0xffe00000 -> 0xfff00000	1M	PCIe I/O aperture
 - 0xfff0000  -> 0xffffffff	1M	BootROM

The overlap means that when PCIe devices are added, depending on their
memory window needs, they might or might not be mapped into the
physical address space. Indeed, they will not be mapped if the area
allocated in the PCIe memory aperture by the PCI core overlaps with
one of the Crypto SRAM. Typically, a Intel IGB PCIe NIC that needs 8MB
of PCIe memory will see its PCIe memory window allocated from
0xf80000000 for 8MB, which overlaps with the Crypto SRAM windows. Due
to this, the PCIe window is not created, and any attempt to access the
PCIe window makes the kernel explode:

[    3.302213] igb: Copyright (c) 2007-2014 Intel Corporation.
[    3.307841] pci 0000:00:09.0: enabling device (0140 -> 0143)
[    3.313539] mvebu_mbus: cannot add window '4:f8', conflicts with another window
[    3.320870] mvebu-pcie soc:pcie-controller: Could not create MBus window at [mem 0xf8000000-0xf87fffff]: -22
[    3.330811] Unhandled fault: external abort on non-linefetch (0x1008) at 0xf08c0018

This problem does not occur on Armada 370 boards, because we use the
following memory mapping (for boards that have internal registers at
0xf1000000):

 - 0x00000000 -> 0xf0000000	3.75G 	RAM
 - 0xf0000000 -> 0xf1000000	16M	NOR flashes (AXP GP / AXP DB)
 - 0xf1000000 -> 0xf1100000	1M	internal registers
 - 0xf1100000 -> 0xf1110000	64KB	Crypto SRAM #0 => OK !
 - 0xf8000000 -> 0xffe0000	126M	PCIe memory
 - 0xffe00000 -> 0xfff00000	1M	PCIe I/O
 - 0xfff0000  -> 0xffffffff	1M	BootROM

Obviously, the solution is to align the location of the Crypto SRAM
mappings of Armada XP to be similar with the ones on Armada 370, i.e
have them between the "internal registers" area and the beginning of
the PCIe aperture.

However, we have a special case with the OpenBlocks AX3-4 platform,
which has a 128 MB NOR flash. Currently, this NOR flash is mapped from
0xf0000000 to 0xf8000000. This is possible because on OpenBlocks
AX3-4, the internal registers are not at 0xf1000000. And this explains
why the Crypto SRAM mappings were not configured at the same place on
Armada XP.

Hence, the solution is two-fold:

 (1) Move the NOR flash mapping on Armada XP OpenBlocks AX3-4 from
     0xe8000000 to 0xf0000000. This frees the 0xf0000000 ->
     0xf80000000 space.

 (2) Move the Crypto SRAM mappings on Armada XP to be similar to
     Armada 370 (except of course that Armada XP has two Crypto SRAM
     and not one).

After this patch, the memory mapping on Armada XP boards with
registers at 0xf1 is:

 - 0x00000000 -> 0xf0000000	3.75G 	RAM
 - 0xf0000000 -> 0xf1000000	16M	NOR flashes (AXP GP / AXP DB)
 - 0xf1000000 -> 0xf1100000	1M	internal registers
 - 0xf1100000 -> 0xf1110000	64KB	Crypto SRAM #0
 - 0xf1110000 -> 0xf1120000	64KB	Crypto SRAM #1
 - 0xf8000000 -> 0xffe0000	126M	PCIe memory
 - 0xffe00000 -> 0xfff00000	1M	PCIe I/O
 - 0xfff0000  -> 0xffffffff	1M	BootROM

And the memory mapping for the special case of the OpenBlocks AX3-4
(internal registers at 0xd0000000, NOR of 128 MB):

 - 0x00000000 -> 0xc0000000	3G 	RAM
 - 0xd0000000 -> 0xd1000000	1M	internal registers
 - 0xe800000  -> 0xf0000000	128M	NOR flash
 - 0xf1100000 -> 0xf1110000	64KB	Crypto SRAM #0
 - 0xf1110000 -> 0xf1120000	64KB	Crypto SRAM #1
 - 0xf8000000 -> 0xffe0000	126M	PCIe memory
 - 0xffe00000 -> 0xfff00000	1M	PCIe I/O
 - 0xfff0000  -> 0xffffffff	1M	BootROM

Fixes: c466d997 ("ARM: mvebu: define crypto SRAM ranges for all armada-xp boards")
Reported-by: NPhil Sutter <phil@nwl.cc>
Cc: Phil Sutter <phil@nwl.cc>
Cc: <stable@vger.kernel.org>
Signed-off-by: NThomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: NGregory CLEMENT <gregory.clement@free-electrons.com>
Signed-off-by: NOlof Johansson <olof@lixom.net>

Pull dmaengine fixes from Vinod Koul:
 "Two fixes showed up in last few days, and they should be included in
  4.5.  Summary:

  Two more late fixes to drivers, nothing major here:

   - A memory leak fix in fsdma unmap the dma descriptors on freeup

   - A fix in xdmac driver for residue calculation of dma descriptor"

* tag 'dmaengine-fix-4.5' of git://git.infradead.org/users/vkoul/slave-dma:
  dmaengine: at_xdmac: fix residue computation
  dmaengine: fsldma: fix memory leak

Pull power management and ACPI fixes from Rafael Wysocki:
 "Two more fixes for issues introduced recently, one in the generic
  device properties framework and one in ACPICA.

  Specifics:

   - Revert a recent ACPICA commit that has been reverted upstream,
     because it caused problems to happen on user systems and the
     problem it attempted to address will not be relevant any more after
     upcoming ACPI specification changes (Bob Moore).

   - Fix crash in the generic device properties framework introduced by
     a recent change that forgot to check pointers against error values
     in addition to checking them against NULL (Heikki Krogerus)"

* tag 'pm+acpi-4.5-final' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  device property: fwnode->secondary may contain ERR_PTR(-ENODEV)
  ACPICA: Revert "Parser: Fix for SuperName method invocation"

Pull xfs fixes from Dave Chinner:
 "This is a fix for a regression introduced in 4.5-rc1 by the new torn
  log write detection code.  The regression only affects people moving a
  clean filesystem between machines/kernels of different architecture
  (such as changing between 32 bit and 64 bit kernels), but this is the
  recommended (and only!) safe way to migrate a filesystem between
  architectures so we really need to ensure it works.

  The changes are larger than I'd prefer right at the end of the release
  cycle, but the majority of the change is just factoring code to enable
  the detection of a clean log at the correct time to avoid this issue.

  Changes:

   - Only perform torn log write detection on dirty logs.  This prevents
     failures being detected due to a clean filesystem being moved
     between machines or kernels of different architectures (e.g.  32 ->
     64 bit, BE -> LE, etc).  This fixes a regression introduced by the
     torn log write detection in 4.5-rc1"

* tag 'xfs-for-linus-4.5-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/dgc/linux-xfs:
  xfs: only run torn log write detection on dirty logs
  xfs: refactor in-core log state update to helper
  xfs: refactor unmount record detection into helper
  xfs: separate log head record discovery from verification

Pull vfs fixes from Al Viro:
 "A couple of fixes: Fix for my dumb braino in ncpfs and a long-standing
  breakage on recovery from failed rename() in jffs2"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
  jffs2: reduce the breakage on recovery from halfway failed rename()
  ncpfs: fix a braino in OOM handling in ncp_fill_cache()