EEH is not recovering in a reasonable amount of time on PPC during
e1000e_down().
Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: NJesse Brandeburg <jesse.brandeburg@intel.com>
Signed-off-by: NJeff Garzik <jgarzik@redhat.com>

EEH is not recovering in a reasonable amount of time on PPC during
igb_down().
Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: NJesse Brandeburg <jesse.brandeburg@intel.com>
Signed-off-by: NJeff Garzik <jgarzik@redhat.com>

EEh is not recovering in a resonable amount of time on PPC during
ixgbe_down().
Signed-off-by: NPaul Larson <pl@us.ibm.com>
Signed-off-by: NJesse Brandeburg <jesse.brandeburg@intel.com>
Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: NJeff Garzik <jgarzik@redhat.com>

On Rx FIFO overflow error, the controller consume a buffer descriptor
but currently the driver does not give it back to the controller.
This results unrecoverable 'Buffer List Exhausted' condition.  This
patch fix this problem by moving a "fbl_count--" line to proper place.
Signed-off-by: NAtsushi Nemoto <anemo@mba.ocn.ne.jp>
Signed-off-by: NJeff Garzik <jgarzik@redhat.com>

Call netif_carrier_off() before starting PHY device.  This is a
behavior before converting to generic PHY layer.
Signed-off-by: NAtsushi Nemoto <anemo@mba.ocn.ne.jp>
Signed-off-by: NJeff Garzik <jgarzik@redhat.com>

The documentation for intr_type module parameter of the s2io driver is
not consistent with the code. The comments in drivers/net/s2io.c are
OK, but Documentation/networking/s2io.txt is wrong.

Pointed out by Andrew Hecox.
Signed-off-by: NMichal Schmidt <mschmidt@redhat.com>
Signed-off-by: NJeff Garzik <jgarzik@redhat.com>

Rerouting should only happen in LOCAL_OUT, in INPUT its useless
since the packet has already chosen its final destination.

Noticed by Alexey Dobriyan <adobriyan@gmail.com>.
Signed-off-by: NPatrick McHardy <kaber@trash.net>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Alexey Dobriyan <adobriyan@gmail.com> writes:
> Subject: ICMP sockets destruction vs ICMP packets oops

> After icmp_sk_exit() nuked ICMP sockets, we get an interrupt.
> icmp_reply() wants ICMP socket.
>
> Steps to reproduce:
>
> 	launch shell in new netns
> 	move real NIC to netns
> 	setup routing
> 	ping -i 0
> 	exit from shell
>
> BUG: unable to handle kernel NULL pointer dereference at 0000000000000000
> IP: [<ffffffff803fce17>] icmp_sk+0x17/0x30
> PGD 17f3cd067 PUD 17f3ce067 PMD 0 
> Oops: 0000 [1] PREEMPT SMP DEBUG_PAGEALLOC
> CPU 0 
> Modules linked in: usblp usbcore
> Pid: 0, comm: swapper Not tainted 2.6.26-rc6-netns-ct #4
> RIP: 0010:[<ffffffff803fce17>]  [<ffffffff803fce17>] icmp_sk+0x17/0x30
> RSP: 0018:ffffffff8057fc30  EFLAGS: 00010286
> RAX: 0000000000000000 RBX: 0000000000000000 RCX: ffff81017c7db900
> RDX: 0000000000000034 RSI: ffff81017c7db900 RDI: ffff81017dc41800
> RBP: ffffffff8057fc40 R08: 0000000000000001 R09: 000000000000a815
> R10: 0000000000000000 R11: 0000000000000001 R12: ffffffff8057fd28
> R13: ffffffff8057fd00 R14: ffff81017c7db938 R15: ffff81017dc41800
> FS:  0000000000000000(0000) GS:ffffffff80525000(0000) knlGS:0000000000000000
> CS:  0010 DS: 0018 ES: 0018 CR0: 000000008005003b
> CR2: 0000000000000000 CR3: 000000017fcda000 CR4: 00000000000006e0
> DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
> DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
> Process swapper (pid: 0, threadinfo ffffffff8053a000, task ffffffff804fa4a0)
> Stack:  0000000000000000 ffff81017c7db900 ffffffff8057fcf0 ffffffff803fcfe4
>  ffffffff804faa38 0000000000000246 0000000000005a40 0000000000000246
>  000000000001ffff ffff81017dd68dc0 0000000000005a40 0000000055342436
> Call Trace:
>  <IRQ>  [<ffffffff803fcfe4>] icmp_reply+0x44/0x1e0
>  [<ffffffff803d3a0a>] ? ip_route_input+0x23a/0x1360
>  [<ffffffff803fd645>] icmp_echo+0x65/0x70
>  [<ffffffff803fd300>] icmp_rcv+0x180/0x1b0
>  [<ffffffff803d6d84>] ip_local_deliver+0xf4/0x1f0
>  [<ffffffff803d71bb>] ip_rcv+0x33b/0x650
>  [<ffffffff803bb16a>] netif_receive_skb+0x27a/0x340
>  [<ffffffff803be57d>] process_backlog+0x9d/0x100
>  [<ffffffff803bdd4d>] net_rx_action+0x18d/0x250
>  [<ffffffff80237be5>] __do_softirq+0x75/0x100
>  [<ffffffff8020c97c>] call_softirq+0x1c/0x30
>  [<ffffffff8020f085>] do_softirq+0x65/0xa0
>  [<ffffffff80237af7>] irq_exit+0x97/0xa0
>  [<ffffffff8020f198>] do_IRQ+0xa8/0x130
>  [<ffffffff80212ee0>] ? mwait_idle+0x0/0x60
>  [<ffffffff8020bc46>] ret_from_intr+0x0/0xf
>  <EOI>  [<ffffffff80212f2c>] ? mwait_idle+0x4c/0x60
>  [<ffffffff80212f23>] ? mwait_idle+0x43/0x60
>  [<ffffffff8020a217>] ? cpu_idle+0x57/0xa0
>  [<ffffffff8040f380>] ? rest_init+0x70/0x80
> Code: 10 5b 41 5c 41 5d 41 5e c9 c3 66 2e 0f 1f 84 00 00 00 00 00 55 48 89 e5 53
> 48 83 ec 08 48 8b 9f 78 01 00 00 e8 2b c7 f1 ff 89 c0 <48> 8b 04 c3 48 83 c4 08
> 5b c9 c3 66 66 66 66 66 2e 0f 1f 84 00
> RIP  [<ffffffff803fce17>] icmp_sk+0x17/0x30
>  RSP <ffffffff8057fc30>
> CR2: 0000000000000000
> ---[ end trace ea161157b76b33e8 ]---
> Kernel panic - not syncing: Aiee, killing interrupt handler!

Receiving packets while we are cleaning up a network namespace is a
racy proposition. It is possible when the packet arrives that we have
removed some but not all of the state we need to fully process it.  We
have the choice of either playing wack-a-mole with the cleanup routines
or simply dropping packets when we don't have a network namespace to
handle them.

Since the check looks inexpensive in netif_receive_skb let's just
drop the incoming packets.
Signed-off-by: NEric W. Biederman <ebiederm@xmission.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

As noticed by Gabriel Campana, the kmalloc() length arg
passed in by sctp_getsockopt_local_addrs_old() can overflow
if ->addr_num is large enough.

Therefore, enforce an appropriate limit.
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Fix warning:
drivers/net/pppoe.c: In function 'pppoe_recvmsg':
drivers/net/pppoe.c:945: warning: comparison of distinct pointer types lacks a cast
because skb->len is unsigned int and total_len is size_t
Signed-off-by: NStephen Hemminger <shemminger@vyatta.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

[ Based upon original report and patch by Karsten Keil.  Karsten
  has verified that this fixes the TAHI test case "ICMPv6 test
  v6LC.5.1.2 Part F". -DaveM ]
Signed-off-by: NYOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Remove the sticky Hop-by-Hop options header by calling setsockopt()
for IPV6_HOPOPTS with a zero option length, per RFC3542.

Routing header and Destination options header does the same as
Hop-by-Hop options header.
Signed-off-by: NShan Wei <shanwei@cn.fujitsu.com>
Acked-by: NYOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

When a driver rejects a frame in it's ->tx() callback, it must also
stop queues, otherwise mac80211 can go into a loop here. Detect this
situation and abort the loop after five retries, warning about the
driver bug.
Signed-off-by: NJohannes Berg <johannes@sipsolutions.net>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

genetlink has a circular locking dependency when dumping the registered
families:

- dump start:
genl_rcv()            : take genl_mutex
genl_rcv_msg()        : call netlink_dump_start() while holding genl_mutex
netlink_dump_start(),
netlink_dump()        : take nlk->cb_mutex
ctrl_dumpfamily()     : try to detect this case and not take genl_mutex a
                        second time

- dump continuance:
netlink_rcv()         : call netlink_dump
netlink_dump          : take nlk->cb_mutex
ctrl_dumpfamily()     : take genl_mutex

Register genl_lock as callback mutex with netlink to fix this. This slightly
widens an already existing module unload race, the genl ops used during the
dump might go away when the module is unloaded. Thomas Graf is working on a
seperate fix for this.
Signed-off-by: NPatrick McHardy <kaber@trash.net>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This reverts commit 608961a5.

The problem is that the mac80211 stack not only needs to be able to
muck with the link-level headers, it also might need to mangle all of
the packet data if doing sw wireless encryption.

This fixes kernel bugzilla #10903.  Thanks to Didier Raboud (for the
bugzilla report), Andrew Prince (for bisecting), Johannes Berg (for
bringing this bisection analysis to my attention), and Ilpo (for
trying to analyze this purely from the TCP side).

In 2.6.27 we can take another stab at this, by using something like
skb_cow_data() when the TX path of mac80211 ends up with a non-NULL
tx->key.  The ESP protocol code in the IPSEC stack can be used as a
model for implementation.
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The unix_dgram_sendmsg routine implements a (somewhat crude)
form of receiver-imposed flow control by comparing the length of the
receive queue of the 'peer socket' with the max_ack_backlog value
stored in the corresponding sock structure, either blocking
the thread which caused the send-routine to be called or returning
EAGAIN. This routine is used by both SOCK_DGRAM and SOCK_SEQPACKET
sockets. The poll-implementation for these socket types is
datagram_poll from core/datagram.c. A socket is deemed to be writeable
by this routine when the memory presently consumed by datagrams
owned by it is less than the configured socket send buffer size. This
is always wrong for connected PF_UNIX non-stream sockets when the
abovementioned receive queue is currently considered to be full.
'poll' will then return, indicating that the socket is writeable, but
a subsequent write result in EAGAIN, effectively causing an
(usual) application to 'poll for writeability by repeated send request
with O_NONBLOCK set' until it has consumed its time quantum.

The change below uses a suitably modified variant of the datagram_poll
routines for both type of PF_UNIX sockets, which tests if the
recv-queue of the peer a socket is connected to is presently
considered to be 'full' as part of the 'is this socket
writeable'-checking code. The socket being polled is additionally
put onto the peer_wait wait queue associated with its peer, because the
unix_dgram_sendmsg routine does a wake up on this queue after a
datagram was received and the 'other wakeup call' is done implicitly
as part of skb destruction, meaning, a process blocked in poll
because of a full peer receive queue could otherwise sleep forever
if no datagram owned by its socket was already sitting on this queue.
Among this change is a small (inline) helper routine named
'unix_recvq_full', which consolidates the actual testing code (in three
different places) into a single location.
Signed-off-by: NRainer Weikusat <rweikusat@mssgmbh.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

By default, tun.c running in TUN_TUN_DEV mode will set the protocol of
packet to IPv4 if TUN_NO_PI is set. My program failed to work when I
assumed that the driver will check the first nibble of packet,
determine IP version and set the appropriate protocol.
Signed-off-by: NAng Way Chuang <wcang@nav6.org>
Acked-by: NMax Krasnyansky <maxk@qualcomm.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The atl1 driver tries to determine the MAC address thusly:

	- If an EEPROM exists, read the MAC address from EEPROM and
	  validate it.
	- If an EEPROM doesn't exist, try to read a MAC address from
	  SPI flash.
	- If that fails, try to read a MAC address directly from the
	  MAC Station Address register.
	- If that fails, assign a random MAC address provided by the
	  kernel.

We now have a report of a system fitted with an EEPROM containing all
zeros where we expect the MAC address to be, and we currently handle
this as an error condition.  Turns out, on this system the BIOS writes
a valid MAC address to the NIC's MAC Station Address register, but we
never try to read it because we return an error when we find the all-
zeros address in EEPROM.

This patch relaxes the error check and continues looking for a MAC
address even if it finds an illegal one in EEPROM.
Signed-off-by: NRadu Cristescu <advantis@gmx.net>
Signed-off-by: NJay Cliburn <jacliburn@bellsouth.net>
Signed-off-by: NJeff Garzik <jgarzik@redhat.com>

Keep enc28j60 chips in low-power mode when they're not in use.
At typically 120 mA, these chips run hot even when idle; this
low power mode cuts that power usage by a factor of around 100.

This version provides a generic routine to poll a register until
its masked value equals some value ... e.g. bit set or cleared.
It's basically what the previous wait_phy_ready() did, but this
version is generalized to support the handshaking needed to
enter and exit low power mode.
Signed-off-by: NDavid Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: NClaudio Lanconelli <lanconelli.claudio@eptar.com>
Signed-off-by: NJeff Garzik <jgarzik@redhat.com>

Minor bugfixes to the enc28j60 driver ... wrong section marking,
indentation, and bogus use of spi_bus_type.
Signed-off-by: NDavid Brownell <dbrownell@users.sourceforge.net>
Acked-by: NClaudio Lanconelli <lanconelli.claudio@eptar.com>
Signed-off-by: NJeff Garzik <jgarzik@redhat.com>

Missed one pci id for 88E8040T.
Signed-off-by: NStephen Hemminger <shemminger@vyatta.com>
Signed-off-by: NJeff Garzik <jgarzik@redhat.com>

Downloading firmware in pci probe allows recovery in case of
firmware failure by reloading the driver.

Also reduced delays in firmware load.
Signed-off-by: NDhananjay Phadke <dhananjay@netxen.com>
Signed-off-by: NJeff Garzik <jgarzik@redhat.com>

o Remove unnecessary debug prints and functions.
o Explicitly specify pci class (0x020000) to avoid enabling
  management function.
Signed-off-by: NDhananjay Phadke <dhananjay@netxen.com>
Signed-off-by: NJeff Garzik <jgarzik@redhat.com>

Store physical port number in netxen_adapter structure.
Signed-off-by: NDhananjay Phadke <dhananjay@netxen.com>
Signed-off-by: NJeff Garzik <jgarzik@redhat.com>

This fixes a the issue where logical port number is set incorrectly
for HP blade mezz cards.
Signed-off-by: NDhananjay Phadke <dhananjay@netxen.com>
Signed-off-by: NJeff Garzik <jgarzik@redhat.com>

The ibm_newemac driver requires ether_crc to be defined.  Apparently it is
possible to generate a .config without CONFIG_CRC32 set which causes the
following link errors if IBM_NEW_EMAC is selected:

  LD      .tmp_vmlinux1
drivers/built-in.o: In function `emac_hash_mc':
core.c:(.text+0x2f524): undefined reference to `crc32_le'
core.c:(.text+0x2f528): undefined reference to `bitrev32'
make: *** [.tmp_vmlinux1] Error 1

This patch has IBM_NEW_EMAC select CRC32 so we don't hit this error.
Signed-off-by: NJosh Boyer <jwboyer@linux.vnet.ibm.com>
Signed-off-by: NJeff Garzik <jgarzik@redhat.com>

When generating the ip header for the transformed packet we just copy
the frag_off field of the ip header from the original packet to the ip
header of the new generated packet. If we receive a packet as a chain
of fragments, all but the last of the new generated packets have the
IP_MF flag set. We have to mask the frag_off field to only keep the
IP_DF flag from the original packet. This got lost with git commit
36cf9acf ("[IPSEC]: Separate
inner/outer mode processing on output")
Signed-off-by: NSteffen Klassert <steffen.klassert@secunet.com>
Acked-by: NHerbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The H.245 helper is not registered/unregistered, but assigned to
connections manually from the Q.931 helper. This means on unload
existing expectations and connections using the helper are not
cleaned up, leading to the following oops on module unload:

CPU 0 Unable to handle kernel paging request at virtual address c00a6828, epc == 802224dc, ra == 801d4e7c
Oops[#1]:
Cpu 0
$ 0   : 00000000 00000000 00000004 c00a67f0
$ 4   : 802a5ad0 81657e00 00000000 00000000
$ 8   : 00000008 801461c8 00000000 80570050
$12   : 819b0280 819b04b0 00000006 00000000
$16   : 802a5a60 80000000 80b46000 80321010
$20   : 00000000 00000004 802a5ad0 00000001
$24   : 00000000 802257a8
$28   : 802a4000 802a59e8 00000004 801d4e7c
Hi    : 0000000b
Lo    : 00506320
epc   : 802224dc ip_conntrack_help+0x38/0x74     Tainted: P
ra    : 801d4e7c nf_iterate+0xbc/0x130
Status: 1000f403    KERNEL EXL IE
Cause : 00800008
BadVA : c00a6828
PrId  : 00019374
Modules linked in: ip_nat_pptp ip_conntrack_pptp ath_pktlog wlan_acl wlan_wep wlan_tkip wlan_ccmp wlan_xauth ath_pci ath_dev ath_dfs ath_rate_atheros wlan ath_hal ip_nat_tftp ip_conntrack_tftp ip_nat_ftp ip_conntrack_ftp pppoe ppp_async ppp_deflate ppp_mppe pppox ppp_generic slhc
Process swapper (pid: 0, threadinfo=802a4000, task=802a6000)
Stack : 801e7d98 00000004 802a5a60 80000000 801d4e7c 801d4e7c 802a5ad0 00000004
        00000000 00000000 801e7d98 00000000 00000004 802a5ad0 00000000 00000010
        801e7d98 80b46000 802a5a60 80320000 80000000 801d4f8c 802a5b00 00000002
        80063834 00000000 80b46000 802a5a60 801e7d98 80000000 802ba854 00000000
        81a02180 80b7e260 81a021b0 819b0000 819b0000 80570056 00000000 00000001
        ...
Call Trace:
 [<801e7d98>] ip_finish_output+0x0/0x23c
 [<801d4e7c>] nf_iterate+0xbc/0x130
 [<801d4e7c>] nf_iterate+0xbc/0x130
 [<801e7d98>] ip_finish_output+0x0/0x23c
 [<801e7d98>] ip_finish_output+0x0/0x23c
 [<801d4f8c>] nf_hook_slow+0x9c/0x1a4

One way to fix this would be to split helper cleanup from the unregistration
function and invoke it for the H.245 helper, but since ctnetlink needs to be
able to find the helper for synchonization purposes, a better fix is to
register it normally and make sure its not assigned to connections during
helper lookup. The missing l3num initialization is enough for this, this
patch changes it to use AF_UNSPEC to make it more explicit though.
Reported-by: Nliannan <liannan@twsz.com>
Signed-off-by: NPatrick McHardy <kaber@trash.net>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Properly free h323_buffer when helper registration fails.
Signed-off-by: NPatrick McHardy <kaber@trash.net>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Fix three ct_extend/NAT extension related races:

- When cleaning up the extension area and removing it from the bysource hash,
  the nat->ct pointer must not be set to NULL since it may still be used in
  a RCU read side

- When replacing a NAT extension area in the bysource hash, the nat->ct
  pointer must be assigned before performing the replacement

- When reallocating extension storage in ct_extend, the old memory must
  not be freed immediately since it may still be used by a RCU read side

Possibly fixes https://bugzilla.redhat.com/show_bug.cgi?id=449315
and/or http://bugzilla.kernel.org/show_bug.cgi?id=10875Signed-off-by: NPatrick McHardy <kaber@trash.net>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Signed-off-by: NChas Williams <chas@cmf.nrl.navy.mil>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

From: "Robert T. Johnson" <rtjohnso@eecs.berkeley.edu>
Signed-off-by: NChas Williams <chas@cmf.nrl.navy.mil>

From: Eric Kinzie <ekinzie@cmf.nrl.navy.mil>
Signed-off-by: NChas Williams <chas@cmf.nrl.navy.mil>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Signed-off-by: NChas Williams <chas@cmf.nrl.navy.mil>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This causes the suni driver to oops if you try to use sonetdiag to get
the statistics. Also add the corresponding phy->stop call to fix another
oops if you try to remove the module.
Signed-off-by: NJorge Boncompte [DTI2] <jorge@dti2.net>
Signed-off-by: NChas Williams <chas@cmf.nrl.navy.mil>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Signed-off-by: NJorge Boncompte [DTI2] <jorge@dti2.net>
Signed-off-by: NChas Williams <chas@cmf.nrl.navy.mil>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

It happens that if a packet arrives in a VC between the call to open it on
the hardware and the call to change the backend to br2684, br2684_regvcc
processes the packet and oopses dereferencing skb->dev because it is
NULL before the call to br2684_push().
Signed-off-by: NJorge Boncompte [DTI2] <jorge@dti2.net>
Signed-off-by: NChas Williams <chas@cmf.nrl.navy.mil>

1) Remove ICMP_MIN_LENGTH, as it is unused.

2) Remove unneeded tcp_v4_send_check() declaration.
Signed-off-by: NRami Rosen <ramirose@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

I just noticed "cat /proc/net/raw" was buggy, missing '\n' separators.

I believe this was introduced by commit 8cd850ef 
([RAW]: Cleanup IPv4 raw_seq_show.)

This trivial patch restores correct behavior, and applies to current 
Linus tree (should also be applied to stable tree as well.)
Signed-off-by: NEric Dumazet <dada1@cosmosbay.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>