Add a single-vendor config for vt8500. We can't enable WM8750 in
multi_v7_defconfig since it's a v6-based device, but it's still valuable
to have an in-tree defconfig that is suitable for the hardware.

This is based on multi_v7_defconfig and can be tweaked over time. It
gets us off the ground for now. Naming it vt8500_v6_v7 similar to i.MX
since there are v5-based vt8500 chips as well.
Signed-off-by: NOlof Johansson <olof@lixom.net>
Acked-by: NTony Prisk <linux@prisktech.co.nz>

This patch (re)adds ARCH_BCM_MOBILE option to bcm_defconfig which was
accidentally removed by commit 2d58b265 ('ARM: bcm_defconfig: Run
"make savedefconfig"')
Signed-off-by: NChristian Daudt <bcm@fixthebug.org>
Signed-off-by: NOlof Johansson <olof@lixom.net>

Several of the options in bcm_defconfig have gotten out of date so
regenerate it with "make savedefconfig" to keep things fresh.
Signed-off-by: NTim Kryger <tim.kryger@linaro.org>
Reviewed-by: NMatt Porter <matt.porter@linaro.org>

Currently ARCH_BCM has been used for Broadcom
Mobile V7 based SoCs. In order to allow other Broadcom
SoCs to also use mach-bcm directory and files, this patch
renames the original ARCH_BCM to ARCH_BCM_MOBILE, and
uses ARCH_BCM to define any Broadcom chip residing
in mach-bcm directory.
Signed-off-by: NChristian Daudt <bcm@fixthebug.org>
Acked-by: NOlof Johansson <olof@lixom.net>

Changes from v2:
 - switch ARCH_MULTIPLATFORM from select to depends
 - remove 'default y' from BCM_MOBILE

Changes from v1:
 - fix alpha ordering in dts/Makefile
 - break into 4 patches for separate subsys

Convert ep93xx to use the OHCI platform driver and remove the
ohci-ep93xx bus glue driver.

Enable CONFIG_OHCI_HCD_PLATFORM in the ep93xx_defconfig so that USB
is still enabled by default on the EP93xx platform.
Signed-off-by: NH Hartley Sweeten <hsweeten@visionengravers.com>
Acked-by: NAlan Stern <stern@rowland.harvard.edu>
Cc: Ryan Mallon <rmallon@gmail.com>
Cc: Lennert Buytenhek <kernel@wantstofly.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Olof Johansson <olof@lixom.net>
Cc: Russell King <linux@arm.linux.org.uk>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

This patch enables all drivers and alike to make defconfig-ed
kernels use Versatile Express specific features, like power
management services (PSCI, MCPM with drivers for DCCSB on
Fast Models and SPC on TC2), CMA for frame buffer allocation,
all virtio device drivers (for QEMU, KVM tools and Fast Models),
MTD physmap drivers with squashfs and UBIFS for flash,
I2C master, regulator and hwmon drivers and LEDs support with
most useful triggers. The maximum amount of CPUs has been
increased to 8 to facilitate big.Little systems.
Signed-off-by: NPawel Moll <pawel.moll@arm.com>
Signed-off-by: NOlof Johansson <olof@lixom.net>

This patch updates the Versatile Express defconfig to a level
which makes it possible to run a defconfig-ed kernel work
on the board and in QEMU with modern userspace. It does:

- update cmdline to contain "console=ttyAMA0" only
- enable devtmpfs filesystem
- enable voltage regulator support
- enable ext4 filesystem
- disable low level debug and early printk
Signed-off-by: NFathi Boudra <fathi.boudra@linaro.org>
[PM: removed DEBUG_LL - it doesn't work on qemu]
[PM: reworded the commit message]
Signed-off-by: NPawel Moll <pawel.moll@arm.com>
Signed-off-by: NOlof Johansson <olof@lixom.net>

This is very useful for detecting 'circular locking dependency' issues.
Signed-off-by: NFabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: NShawn Guo <shawn.guo@linaro.org>

Signed-off-by: NFabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: NShawn Guo <shawn.guo@linaro.org>

Having CONFIG_DEBUG_GPIO=y leads to several debug messages polluting kernel log:

[    0.580325] of_get_named_gpio_flags: can't parse gpios property of node '/regulators/3p3v[0]'
[    0.581185] 3P3V: 3300 mV
[    0.584827] of_get_named_gpio_flags exited with status 124
[    0.585852] vddio-sd0: 3300 mV
[    0.590023] of_get_named_gpio_flags exited with status 79
[    0.590770] fec-3v3: 3300 mV
[    0.594805] of_get_named_gpio_flags exited with status 105
[    0.595491] usb0_vbus: 5000 mV
[    0.599687] of_get_named_gpio_flags exited with status 104
[    0.600380] usb1_vbus: 5000 mV
[    0.604463] of_get_named_gpio_flags exited with status 126
[    0.605153] lcd-3v3: 3300 mV
[    0.608970] of_get_named_gpio_flags exited with status 77

Turn this option off, as these messages are not really useful for normal usage.
Signed-off-by: NFabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: NShawn Guo <shawn.guo@linaro.org>

Generated by doing:

make mxs_defconfig
Manually selected the CHIPIDEA_UDC driver
make savedefconfig
cp defconfig arch/arm/configs/mxs_defconfig
Signed-off-by: NFabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: NShawn Guo <shawn.guo@linaro.org>

Generated by doing:

make imx_v6_v7_defconfig
Manually selected the CHIPIDEA_UDC driver
make savedefconfig
cp defconfig arch/arm/configs/imx_v6_v7_defconfig
Signed-off-by: NFabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: NShawn Guo <shawn.guo@linaro.org>

Generated by doing:

make imx_v6_v7_defconfig
Manually selected the IMX_SPDIF driver
make savedefconfig
cp defconfig arch/arm/configs/imx_v6_v7_defconfig
Signed-off-by: NFabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: NShawn Guo <shawn.guo@linaro.org>

Generate ep93xx_defconfig by doing:

make ep93xx_defconfig
make savedefconfig
mv defconfig arch/arm/configs/ep93xx_defconfig

No function change. This just refreshes the ep93xx_defconfig to make it
easier and cleaner when adding new entries.
Signed-off-by: NH Hartley Sweeten <hsweeten@visionengravers.com>
Acked-by: NRyan Mallon <rmallon@gmail.com>
Cc: Alan Stern <stern@rowland.harvard.edu>
Cc: Lennert Buytenhek <kernel@wantstofly.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Olof Johansson <olof@lixom.net>
Cc: Russell King <linux@arm.linux.org.uk>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

This updates the integrator defconfig, apart from the usual
re-shuffling of symbols due to restructuring of the kernel Kconfig
this will also:

- Enable IM-PD1 so all hardware is enabled out-of-the-box
- Enable the LEDs class and heartbeat trigger, so that the
  LED driver in plat-versatile/ is compiled.
- Enale some debug code like the CLK debug.
Signed-off-by: NLinus Walleij <linus.walleij@linaro.org>

DWC3 enables USB3 functionality for OMAP5 boards,
it's safe to enable those drivers in omap2plus_defconfig.
Signed-off-by: NFelipe Balbi <balbi@ti.com>
Acked-by: NTony Lindgren <tony@atomide.com>
Signed-off-by: NKishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: NBenoit Cousson <bcousson@baylibre.com>
[tony@atomide.com: updated against other defconfig changes]
Signed-off-by: NTony Lindgren <tony@atomide.com>

Many boards have either WL12XX or MWIFIEX, so let's
build modules for those by default. This also makes it
easier to test WLAN on pandaboard to avoid regressions
like we had with the move to device tree based booting.

And at least the zoom boards need the of_serial for the
UARTs connected to the GPMC bus.
Signed-off-by: NTony Lindgren <tony@atomide.com>

We can save few tens of lines this way, and it is easier
to generate minimal patches against omap2plus_defconfig.
Signed-off-by: NTony Lindgren <tony@atomide.com>

Keystone I2C dnd SPI driver updates are already merged so lets
enable them in config.
Signed-off-by: NSantosh Shilimkar <santosh.shilimkar@ti.com>

ARCH_TEGRA_124_SOC: Tegra124 SoC support.
CPU_FREQ_STAT_DETAILS: Enables various sysfs files that are useful when
    testing cpufreq.
CONFIG_COMMON_CLK_DEBUG: Useful to look at the clock tree to verify that
    clocks for the various devices have been properly set up.
PINCTRL_PALMAS: Used on Dalmore board.
NEON: Enables SIMD instruction support for Tegra30 and later SoCs.
Signed-off-by: NThierry Reding <treding@nvidia.com>
Signed-off-by: NLaxman Dewangan <ldewangan@nvidia.com>
Signed-off-by: NJoseph Lo <josephl@nvidia.com>
Signed-off-by: NStephen Warren <swarren@nvidia.com>

So far, the Allwinner SoCs were only supported using the
multi_v7_defconfig. Add a defconfig of our own to have one a bit more
tailor-made.
Signed-off-by: NMaxime Ripard <maxime.ripard@free-electrons.com>

Turn on SDHCI for i.MX support so machines can boot with local rootfs
on SD. Tested on a Wandboard Quad.
Signed-off-by: NOlof Johansson <olof@lixom.net>
Reviewed-by: NFabio Estevam <fabio.estevam@freescale.com>

Churns the rest of the file a bit due to reordering of options, but the
only changes are:

CONFIG_ARM_APPENDED_DTB=y
CONFIG_ARM_ATAG_DTB_COMPAT=y
Signed-off-by: NOlof Johansson <olof@lixom.net>

This is intended to be used until multi-arch is able to be
used for the koelsch board at which time a more generic configuration
will be used in place of this one.

This is based on the lager defconfig.
Signed-off-by: NSimon Horman <horms+renesas@verge.net.au>

Signed-off-by: NKuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: NSimon Horman <horms+renesas@verge.net.au>

A R-Car DU DRM device is registered for the Lager board, select the
corresponding driver in its defconfig.
Signed-off-by: NLaurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Acked-by: NKuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: NSimon Horman <horms+renesas@verge.net.au>

A R-Car DU DRM device is registered for the Marzen board, select the
corresponding driver in its defconfig.
Signed-off-by: NLaurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Acked-by: NKuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: NSimon Horman <horms+renesas@verge.net.au>

This is just a standard board for the Ux500, include it in the
v7 multiplatform defconfig.
Signed-off-by: NLinus Walleij <linus.walleij@linaro.org>
Signed-off-by: NOlof Johansson <olof@lixom.net>

Without this, legacy platforms that can boot with a multiplatform
kernel but that need the DTB to be appended, won't have a way to pass
firmware-set bootargs to the kernel.

This is needed to boot multi_v7_defconfig on snowball, for instance.
Signed-off-by: NOlof Johansson <olof@lixom.net>

The Shark machine sub-architecture (also known as DNARD, the
DIGITAL Network Appliance Reference Design) lacks a maintainer
able to apply and test patches to modernize the architecture.

It is suspected that the current kernel, while it compiles,
does not even boot on this machine. The listed maintainer has
expressed that he will not be able to spend any time on the
maintenance for the coming year.

So let's delete it from the kernel for now. It can always be
resurrected with git revert if maintenance is resumed.

As the VIA82c505 PCI adapter was only used by this
architecture, that gets deleted too.

Cc: arm@kernel.org
Cc: Alexander Schulz <alex@shark-linux.de>
Signed-off-by: NLinus Walleij <linus.walleij@linaro.org>

The old display drivers are no longer used, and will be phased out. So
remove them from the omap2plus_defconfig.
Signed-off-by: NTomi Valkeinen <tomi.valkeinen@ti.com>
Acked-by: NTony Lindgren <tony@atomide.com>

Add some of the most common new display drivers to omap2plus_defconfig
to be built as modules.
Signed-off-by: NTomi Valkeinen <tomi.valkeinen@ti.com>
Acked-by: NTony Lindgren <tony@atomide.com>

Signed-off-by: NJean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: NNicolas Ferre <nicolas.ferre@atmel.com>

Add the VIN and ADV7180 drivers to 'marzen_defconfig'.
Signed-off-by: NVladimir Barinov <vladimir.barinov@cogentembedded.com>
Signed-off-by: NSergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Acked-by: NSimon Horman <horms+renesas@verge.net.au>
Signed-off-by: NMauro Carvalho Chehab <m.chehab@samsung.com>

Add the VIN and ML86V7667 drivers to 'bockw_defconfig'.
Signed-off-by: NVladimir Barinov <vladimir.barinov@cogentembedded.com>
Signed-off-by: NSergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Acked-by: NSimon Horman <horms+renesas@verge.net.au>
Signed-off-by: NMauro Carvalho Chehab <m.chehab@samsung.com>

Commit 02502da4 (ASoC: imx-mc13783: Depend on ARCH_ARM) caused the selection of
CONFIG_SND_SOC_IMX_MC13783 to be impossible due to a wrong dependency, which
caused CONFIG_SND_SOC_IMX_MC13783 to be removed after the defconfigs cleanups.

The original selection problem has been fixed by 9f19de64 (ASoC: imx-mc13783:
Make SND_SOC_IMX_MC13783 visible again), so it is possible to select
CONFIG_SND_SOC_IMX_MC13783 again as originally done.
Signed-off-by: NFabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: NShawn Guo <shawn.guo@linaro.org>

Wandboard has a Broadcom 4329 chipset connected to SDHC, so turn on the wireless
related options.
Signed-off-by: NFabio Estevam <fabio.estevam@freescale.com>
Tested-by: NTony Prisk <linux@prisktech.co.nz>
Signed-off-by: NShawn Guo <shawn.guo@linaro.org>

Generate imx_v4_v5_defconfig by doing:

make imx_v4_v5_defconfig
make savedefconfig
cp defconfig arch/arm/configs/imx_v4_v5_defconfig

No functional change. The goal here is to cleanup imx_v4_v5_defconfig file to
make easier and cleaner the addition of new entries.
Signed-off-by: NFabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: NShawn Guo <shawn.guo@linaro.org>

Let SATA support be built by default.
Signed-off-by: NFabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: NShawn Guo <shawn.guo@linaro.org>

Generate imx_v6_v7_defconfig by doing:

make savedefconfig

cp defconfig arch/arm/configs/imx_v6_v7_defconfig

No functional change. The goal here is to cleanup imx_v6_v7_defconfig file to
make easier and cleaner the addition of new entries.
Signed-off-by: NFabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: NShawn Guo <shawn.guo@linaro.org>