Pull block fixes from Jens Axboe:
 "Three fixes, two regressions and one that poses a problem in blk-mq
  with the new nvmef code"

* 'for-linus' of git://git.kernel.dk/linux-block:
  blk-mq: skip unmapped queues in blk_mq_alloc_request_hctx
  nvme-rdma: only clear queue flags after successful connect
  blk-throttle: Extend slice if throttle group is not empty

Pull btrfs fixes from Chris Mason:
 "Josef fixed a problem when quotas are enabled with his latest ENOSPC
  rework, and Jeff added more checks into the subvol ioctls to avoid
  tripping up lookup_one_len"

* 'for-linus-4.8' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs:
  btrfs: ensure that file descriptor used with subvol ioctls is a dir
  Btrfs: handle quota reserve failure properly

Pull regmap fix from Mark Brown:
 "A fix for an issue with double locking that was introduced earlier
  this release.  I'd missed in review that we were already in a locked
  region when trying to drop part of the cache"

* tag 'regmap-fix-v4.8-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap:
  regmap: fix deadlock on _regmap_raw_write() error path

Pull crypto fixes from Herbert Xu:
 "This fixes a regression in RSA that was only half-fixed earlier in the
  cycle.  It also fixes an older regression that breaks the keyring
  subsystem"

* 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6:
  crypto: rsa-pkcs1pad - Handle leading zero for decryption
  KEYS: Fix skcipher IV clobbering

Pull arm64 fixes from Catalin Marinas:
 "A couple of last-minute arm64 fixes for 4.8:

   - Fix secondary CPU to NUMA node assignment

   - Fix kgdb breakpoint insertion in read-only text sections (when
     CONFIG_DEBUG_RODATA or CONFIG_DEBUG_SET_MODULE_RONX are enabled)"

* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
  arm64: kgdb: handle read-only text / modules
  arm64: Call numa_store_cpu_info() earlier.

Pull MTD fixes from Richard Weinberger:
 "NAND Fixes for 4.8-rc8.

  This contains fixes for bugs which got introduced in -rc1.  Usually
  Brian takes NAND patches from Boris, but since Brian is very busy
  these days with other stuff and Boris is not yet member of the
  kernel.org web of trust I stepped in.

  Boris will be in Berlin at ELCE, I'll sign his key and hopefully other
  Kernel developers too such that he can issue his own pull requests
  soon.

  Summary:

   - Fix a wrong OOB layout definition in the mxc driver
   - Fix incorrect ECC handling in the mtk driver"

* tag 'tags/nand-fixes-for-4.8-rc8' of git://git.infradead.org/linux-ubifs:
  mtd: nand: mxc: fix obiwan error in mxc_nand_v[12]_ooblayout_free() functions
  mtd: nand: fix chances to create incomplete ECC data when writing
  mtd: nand: fix generating over-boundary ECC data when writing

Pull MMC fix from Ulf Hansson:
 "MMC host:

   - dw_mmc: fix the spamming log message"

* tag 'mmc-v4.8-rc7' of git://git.linaro.org/people/ulf.hansson/mmc:
  mmc: dw_mmc: fix the spamming log message

Pull configfs fix from Christoph Hellwig:
 "One more trivial fix for the binary attribute code from Phil Turnbull"

* tag 'configfs-for-4.8-2' of git://git.infradead.org/users/hch/configfs:
  configfs: Return -EFBIG from configfs_write_bin_file.

This provides the caller a feedback that a given hctx is not mapped and thus
no command can be sent on it.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Tested-by: NSteve Wise <swise@opengridcomputing.com>
Signed-off-by: NJens Axboe <axboe@fb.com>

Handle read-only cases when CONFIG_DEBUG_RODATA (4.0) or
CONFIG_DEBUG_SET_MODULE_RONX (3.18) are enabled by using
aarch64_insn_write() instead of probe_kernel_write() as introduced by
commit 2f896d58 ("arm64: use fixmap for text patching") in 4.0.

Fixes: 11d91a77 ("arm64: Add CONFIG_DEBUG_SET_MODULE_RONX support")
Signed-off-by: NAKASHI Takahiro <takahiro.akashi@linaro.org>
Reviewed-by: NMark Rutland <mark.rutland@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Jason Wessel <jason.wessel@windriver.com>
Signed-off-by: NCatalin Marinas <catalin.marinas@arm.com>

The wq_numa_init() function makes a private CPU to node map by calling
cpu_to_node() early in the boot process, before the non-boot CPUs are
brought online.  Since the default implementation of cpu_to_node()
returns zero for CPUs that have never been brought online, the
workqueue system's view is that *all* CPUs are on node zero.

When the unbound workqueue for a non-zero node is created, the
tsk_cpus_allowed() for the worker threads is the empty set because
there are, in the view of the workqueue system, no CPUs on non-zero
nodes.  The code in try_to_wake_up() using this empty cpumask ends up
using the cpumask empty set value of NR_CPUS as an index into the
per-CPU area pointer array, and gets garbage as it is one past the end
of the array.  This results in:

[    0.881970] Unable to handle kernel paging request at virtual address fffffb1008b926a4
[    1.970095] pgd = fffffc00094b0000
[    1.973530] [fffffb1008b926a4] *pgd=0000000000000000, *pud=0000000000000000, *pmd=0000000000000000
[    1.982610] Internal error: Oops: 96000004 [#1] SMP
[    1.987541] Modules linked in:
[    1.990631] CPU: 48 PID: 295 Comm: cpuhp/48 Tainted: G        W       4.8.0-rc6-preempt-vol+ #9
[    1.999435] Hardware name: Cavium ThunderX CN88XX board (DT)
[    2.005159] task: fffffe0fe89cc300 task.stack: fffffe0fe8b8c000
[    2.011158] PC is at try_to_wake_up+0x194/0x34c
[    2.015737] LR is at try_to_wake_up+0x150/0x34c
[    2.020318] pc : [<fffffc00080e7468>] lr : [<fffffc00080e7424>] pstate: 600000c5
[    2.027803] sp : fffffe0fe8b8fb10
[    2.031149] x29: fffffe0fe8b8fb10 x28: 0000000000000000
[    2.036522] x27: fffffc0008c63bc8 x26: 0000000000001000
[    2.041896] x25: fffffc0008c63c80 x24: fffffc0008bfb200
[    2.047270] x23: 00000000000000c0 x22: 0000000000000004
[    2.052642] x21: fffffe0fe89d25bc x20: 0000000000001000
[    2.058014] x19: fffffe0fe89d1d00 x18: 0000000000000000
[    2.063386] x17: 0000000000000000 x16: 0000000000000000
[    2.068760] x15: 0000000000000018 x14: 0000000000000000
[    2.074133] x13: 0000000000000000 x12: 0000000000000000
[    2.079505] x11: 0000000000000000 x10: 0000000000000000
[    2.084879] x9 : 0000000000000000 x8 : 0000000000000000
[    2.090251] x7 : 0000000000000040 x6 : 0000000000000000
[    2.095621] x5 : ffffffffffffffff x4 : 0000000000000000
[    2.100991] x3 : 0000000000000000 x2 : 0000000000000000
[    2.106364] x1 : fffffc0008be4c24 x0 : ffffff0ffffada80
[    2.111737]
[    2.113236] Process cpuhp/48 (pid: 295, stack limit = 0xfffffe0fe8b8c020)
[    2.120102] Stack: (0xfffffe0fe8b8fb10 to 0xfffffe0fe8b90000)
[    2.125914] fb00:                                   fffffe0fe8b8fb80 fffffc00080e7648
.
.
.
[    2.442859] Call trace:
[    2.445327] Exception stack(0xfffffe0fe8b8f940 to 0xfffffe0fe8b8fa70)
[    2.451843] f940: fffffe0fe89d1d00 0000040000000000 fffffe0fe8b8fb10 fffffc00080e7468
[    2.459767] f960: fffffe0fe8b8f980 fffffc00080e4958 ffffff0ff91ab200 fffffc00080e4b64
[    2.467690] f980: fffffe0fe8b8f9d0 fffffc00080e515c fffffe0fe8b8fa80 0000000000000000
[    2.475614] f9a0: fffffe0fe8b8f9d0 fffffc00080e58e4 fffffe0fe8b8fa80 0000000000000000
[    2.483540] f9c0: fffffe0fe8d10000 0000000000000040 fffffe0fe8b8fa50 fffffc00080e5ac4
[    2.491465] f9e0: ffffff0ffffada80 fffffc0008be4c24 0000000000000000 0000000000000000
[    2.499387] fa00: 0000000000000000 ffffffffffffffff 0000000000000000 0000000000000040
[    2.507309] fa20: 0000000000000000 0000000000000000 0000000000000000 0000000000000000
[    2.515233] fa40: 0000000000000000 0000000000000000 0000000000000000 0000000000000018
[    2.523156] fa60: 0000000000000000 0000000000000000
[    2.528089] [<fffffc00080e7468>] try_to_wake_up+0x194/0x34c
[    2.533723] [<fffffc00080e7648>] wake_up_process+0x28/0x34
[    2.539275] [<fffffc00080d3764>] create_worker+0x110/0x19c
[    2.544824] [<fffffc00080d69dc>] alloc_unbound_pwq+0x3cc/0x4b0
[    2.550724] [<fffffc00080d6bcc>] wq_update_unbound_numa+0x10c/0x1e4
[    2.557066] [<fffffc00080d7d78>] workqueue_online_cpu+0x220/0x28c
[    2.563234] [<fffffc00080bd288>] cpuhp_invoke_callback+0x6c/0x168
[    2.569398] [<fffffc00080bdf74>] cpuhp_up_callbacks+0x44/0xe4
[    2.575210] [<fffffc00080be194>] cpuhp_thread_fun+0x13c/0x148
[    2.581027] [<fffffc00080dfbac>] smpboot_thread_fn+0x19c/0x1a8
[    2.586929] [<fffffc00080dbd64>] kthread+0xdc/0xf0
[    2.591776] [<fffffc0008083380>] ret_from_fork+0x10/0x50
[    2.597147] Code: b00057e1 91304021 91005021 b8626822 (b8606821)
[    2.603464] ---[ end trace 58c0cd36b88802bc ]---
[    2.608138] Kernel panic - not syncing: Fatal exception

Fix by moving call to numa_store_cpu_info() for all CPUs into
smp_prepare_cpus(), which happens before wq_numa_init().  Since
smp_store_cpu_info() now contains only a single function call,
simplify by removing the function and out-lining its contents.
Suggested-by: NRobert Richter <rric@kernel.org>
Fixes: 1a2db300 ("arm64, numa: Add NUMA support for arm64 platforms.")
Cc: <stable@vger.kernel.org> # 4.7.x-
Signed-off-by: NDavid Daney <david.daney@cavium.com>
Reviewed-by: NRobert Richter <rrichter@cavium.com>
Tested-by: NYisheng Xie <xieyisheng1@huawei.com>
Signed-off-by: NCatalin Marinas <catalin.marinas@arm.com>

Otherwise, nvme_rdma_stop_and_clear_queue() will incorrectly
try to stop/free rdma qps/cm_ids that are already freed.

Fixes: e89ca58f ("nvme-rdma: add DELETING queue flag")
Reported-by: NSteve Wise <swise@opengridcomputing.com>
Tested-by: NSteve Wise <swise@opengridcomputing.com>
Signed-off-by: NSagi Grimberg <sagi@grimberg.me>
Reviewed-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NJens Axboe <axboe@fb.com>

Pull media fixes from Mauro Carvalho Chehab:

 - several fixes for new drivers added for Kernel 4.8 addition (cec
   core, pulse8 cec driver and Mediatek vcodec)

 - a regression fix for cx23885 and saa7134 drivers

 - an important fix for rcar-fcp, making rcar_fcp_enable() return 0 on
   success

* tag 'media/v4.8-7' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (25 commits)
  [media] cx23885/saa7134: assign q->dev to the PCI device
  [media] rcar-fcp: Make sure rcar_fcp_enable() returns 0 on success
  [media] cec: fix ioctl return code when not registered
  [media] cec: don't Feature Abort broadcast msgs when unregistered
  [media] vcodec:mediatek: Refine VP8 encoder driver
  [media] vcodec:mediatek: Refine H264 encoder driver
  [media] vcodec:mediatek: change H264 profile default to profile high
  [media] vcodec:mediatek: Add timestamp and timecode copy for V4L2 Encoder
  [media] vcodec:mediatek: Fix visible_height larger than coded_height issue in s_fmt_out
  [media] vcodec:mediatek: Fix fops_vcodec_release flow for V4L2 Encoder
  [media] vcodec:mediatek:code refine for v4l2 Encoder driver
  [media] cec-funcs.h: add missing vendor-specific messages
  [media] cec-edid: check for IEEE identifier
  [media] pulse8-cec: fix error handling
  [media] pulse8-cec: set correct Signal Free Time
  [media] mtk-vcodec: add HAS_DMA dependency
  [media] cec: ignore messages when log_addr_mask == 0
  [media] cec: add item to TODO
  [media] cec: set unclaimed addresses to CEC_LOG_ADDR_INVALID
  [media] cec: add CEC_LOG_ADDRS_FL_ALLOW_UNREG_FALLBACK flag
  ...

Pull networking fixes from David Miller:
 "Mostly small bits scattered all over the place, which is usually how
  things go this late in the -rc series.

   1) Proper driver init device resets in bnx2, from Baoquan He.

   2) Fix accounting overflow in __tcp_retransmit_skb(),
      sk_forward_alloc, and ip_idents_reserve, from Eric Dumazet.

   3) Fix crash in bna driver ethtool stats handling, from Ivan Vecera.

   4) Missing check of skb_linearize() return value in mac80211, from
      Johannes Berg.

   5) Endianness fix in nf_table_trace dumps, from Liping Zhang.

   6) SSN comparison fix in SCTP, from Marcelo Ricardo Leitner.

   7) Update DSA and b44 MAINTAINERS entries.

   8) Make input path of vti6 driver work again, from Nicolas Dichtel.

   9) Off-by-one in mlx4, from Sebastian Ott.

  10) Fix fallback route lookup handling in ipv6, from Vincent Bernat.

  11) Fix stack corruption on probe in qed driver, from Yuval Mintz.

  12) PHY init fixes in r8152 from Hayes Wang.

  13) Missing SKB free in irda_accept error path, from Phil Turnbull"

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (61 commits)
  tcp: properly account Fast Open SYN-ACK retrans
  tcp: fix under-accounting retransmit SNMP counters
  MAINTAINERS: Update b44 maintainer.
  net: get rid of an signed integer overflow in ip_idents_reserve()
  net/mlx4_core: Fix to clean devlink resources
  net: can: ifi: Configure transmitter delay
  vti6: fix input path
  ipmr, ip6mr: return lastuse relative to now
  r8152: disable ALDPS and EEE before setting PHY
  r8152: remove r8153_enable_eee
  r8152: move PHY settings to hw_phy_cfg
  r8152: move enabling PHY
  r8152: move some functions
  cxgb4/cxgb4vf: Allocate more queues for 25G and 100G adapter
  qed: Fix stack corruption on probe
  MAINTAINERS: Add an entry for the core network DSA code
  net: ipv6: fallback to full lookup if table lookup is unsuitable
  net/mlx5: E-Switch, Handle mode change failures
  net/mlx5: E-Switch, Fix error flow in the SRIOV e-switch init code
  net/mlx5: Fix flow counter bulk command out mailbox allocation
  ...

Commit 815806e3 ("regmap: drop cache if the bus transfer error")
added a call to regcache_drop_region() to error path in
_regmap_raw_write(). However that path runs with regmap lock taken,
and regcache_drop_region() tries to re-take it, causing a deadlock.
Fix that by calling map->cache_ops->drop() directly.
Signed-off-by: NNikita Yushchenko <nikita.yoush@cogentembedded.com>
Signed-off-by: NMark Brown <broonie@kernel.org>

As the software RSA implementation now produces fixed-length
output, we need to eliminate leading zeros in the calling code
instead.

This patch does just that for pkcs1pad decryption while signature
verification was fixed in an earlier patch.

Fixes: 9b45b7bb ("crypto: rsa - Generate fixed-length output")
Reported-by: NMat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

The IV must not be modified by the skcipher operation so we need
to duplicate it.

Fixes: c3917fd9 ("KEYS: Use skcipher")
Cc: stable@vger.kernel.org
Reported-by: NMimi Zohar <zohar@linux.vnet.ibm.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

When there is no Card which is set to "broken-cd", it's displayed a clock
information continuously. Because it's polling for detecting card.
This patch is fixed this problem.

Fixes: 65257a0d ("mmc: dw_mmc: remove UBSAN warning in dw_mci_setup_bus()")
Reported-by: NTobias Jakobi <tjakobi@math.uni-bielefeld.de>
Signed-off-by: NJaehoon Chung <jh80.chung@samsung.com>
Signed-off-by: NUlf Hansson <ulf.hansson@linaro.org>

Since the TFO socket is accepted right off SYN-data, the socket
owner can call getsockopt(TCP_INFO) to collect ongoing SYN-ACK
retransmission or timeout stats (i.e., tcpi_total_retrans,
tcpi_retransmits). Currently those stats are only updated
upon handshake completes. This patch fixes it.
Signed-off-by: NYuchung Cheng <ycheng@google.com>
Signed-off-by: NEric Dumazet <edumazet@google.com>
Signed-off-by: NNeal Cardwell <ncardwell@google.com>
Signed-off-by: NSoheil Hassas Yeganeh <soheil@google.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This patch fixes these under-accounting SNMP rtx stats
LINUX_MIB_TCPFORWARDRETRANS
LINUX_MIB_TCPFASTRETRANS
LINUX_MIB_TCPSLOWSTARTRETRANS
when retransmitting TSO packets

Fixes: 10d3be56 ("tcp-tso: do not split TSO packets at retransmit time")
Signed-off-by: NYuchung Cheng <ycheng@google.com>
Acked-by: NEric Dumazet <edumazet@google.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Steffen Klassert says:

====================
pull request (net): ipsec 2016-09-21

1) Propagate errors on security context allocation.
   From Mathias Krause.

2) Fix inbound policy checks for inter address family tunnels.
   From Thomas Zeitlhofer.

3) Fix an old memory leak on aead algorithm usage.
   From Ilan Tayari.

4) A recent patch fixed a possible NULL pointer dereference
   but broke the vti6 input path.
   Fix from Nicolas Dichtel.
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Merge tag 'linux-can-fixes-for-4.8-20160921' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can

Marc Kleine-Budde says:

====================
pull-request: can 2016-09-21

this is another pull request of one patch for the upcoming linux-4.8 release.

Marek Vasut fixes the CAN-FD bit rate switch in the ifi driver by configuring
the transmitter delay.
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Taking over as maintainer since Gary Zambrano is no longer working
for Broadcom.
Signed-off-by: NMichael Chan <michael.chan@broadcom.com>
Acked-by: NFlorian Fainelli <f.fainelli@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Jiri Pirko reported an UBSAN warning happening in ip_idents_reserve()

[] UBSAN: Undefined behaviour in ./arch/x86/include/asm/atomic.h:156:11
[] signed integer overflow:
[] -2117905507 + -695755206 cannot be represented in type 'int'

Since we do not have uatomic_add_return() yet, use atomic_cmpxchg()
so that the arithmetics can be done using unsigned int.

Fixes: 04ca6973 ("ip: make IP identifiers less predictable")
Signed-off-by: NEric Dumazet <edumazet@google.com>
Reported-by: NJiri Pirko <jiri@resnulli.us>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This patch cleans devlink resources by calling devlink_port_unregister()
to avoid the following issues:

- Kernel panic when triggering reset flow.
- Memory leak due to unfreed resources in mlx4_init_port_info().

Fixes: 09d4d087 ("mlx4: Implement devlink interface")
Signed-off-by: NKamal Heib <kamalh@mellanox.com>
Signed-off-by: NTariq Toukan <tariqt@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Merge tag 'wireless-drivers-for-davem-2016-09-20' of git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers

Kalle Valo says:

====================
wireless-drivers fixes for 4.8

iwlwifi

* fix to prevent firmware crash when sending off-channel frames
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

If the subvol/snapshot create/destroy ioctls are passed a regular file
with execute permissions set, we'll eventually Oops while trying to do
inode->i_op->lookup via lookup_one_len.

This patch ensures that the file descriptor refers to a directory.

Fixes: cb8e7090 (Btrfs: Fix subvolume creation locking rules)
Fixes: 76dda93c (Btrfs: add snapshot/subvolume destroy ioctl)
Cc: <stable@vger.kernel.org> #v2.6.29+
Signed-off-by: NJeff Mahoney <jeffm@suse.com>
Signed-off-by: NChris Mason <clm@fb.com>

btrfs/022 was spitting a warning for the case that we exceed the quota.  If we
fail to make our quota reservation we need to clean up our data space
reservation.  Thanks,
Signed-off-by: NJosef Bacik <jbacik@fb.com>
Tested-by: NJeff Mahoney <jeffm@suse.com>
Signed-off-by: NChris Mason <clm@fb.com>

Configure the transmitter delay register at +0x1c to correctly handle
the CAN FD bitrate switch (BRS). This moves the SSP (secondary sample
point) to a proper offset, so that the TDC mechanism works and won't
generate error frames on the CAN link.
Signed-off-by: NMarek Vasut <marex@denx.de>
Cc: Marc Kleine-Budde <mkl@pengutronix.de>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Oliver Hartkopp <socketcan@hartkopp.net>
Cc: Wolfgang Grandegger <wg@grandegger.com>
Cc: linux-stable <stable@vger.kernel.org>
Signed-off-by: NMarc Kleine-Budde <mkl@pengutronix.de>

Since commit 1625f452, vti6 is broken, all input packets are dropped
(LINUX_MIB_XFRMINNOSTATES is incremented).

XFRM_TUNNEL_SKB_CB(skb)->tunnel.ip6 is set by vti6_rcv() before calling
xfrm6_rcv()/xfrm6_rcv_spi(), thus we cannot set to NULL that value in
xfrm6_rcv_spi().

A new function xfrm6_rcv_tnl() that enables to pass a value to
xfrm6_rcv_spi() is added, so that xfrm6_rcv() is not touched (this function
is used in several handlers).

CC: Alexey Kodanev <alexey.kodanev@oracle.com>
Fixes: 1625f452 ("net/xfrm_input: fix possible NULL deref of tunnel.ip6->parms.i_key")
Signed-off-by: NNicolas Dichtel <nicolas.dichtel@6wind.com>
Signed-off-by: NSteffen Klassert <steffen.klassert@secunet.com>

When I introduced the lastuse member I made a subtle error because it was
returned as an absolute value but that is meaningless to user-space as it
doesn't allow to see how old exactly an entry is. Let's make it similar to
how the bridge returns such values and make it relative to "now" (jiffies).
This allows us to show the actual age of the entries and is much more
useful (e.g. user-space daemons can age out entries, iproute2 can display
the lastuse properly).

Fixes: 43b9e127 ("net: ipmr/ip6mr: add support for keeping an entry age")
Reported-by: NSatish Ashok <sashok@cumulusnetworks.com>
Signed-off-by: NNikolay Aleksandrov <nikolay@cumulusnetworks.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Hayes Wang says:

====================
r8152: correct the flow of PHY

First, to enable the PHY as early as possible. Some settings may fail if the
PHY is power down.

Move the other PHY settings to hw_phy_cfg() to make sure the order is correct.

Finally, disable ALDPS and EEE before updating the PHY for RTL8153.
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Disable ALDPS and EEE to avoid the possible failure when setting the PHY.
Signed-off-by: NHayes Wang <hayeswang@realtek.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Remove r8153_enable_eee().
Signed-off-by: NHayes Wang <hayeswang@realtek.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Move the PHY relative settings together to hw_phy_cfg().
Signed-off-by: NHayes Wang <hayeswang@realtek.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Move enabling PHY to init(), otherwise some other settings may fail.
Signed-off-by: NHayes Wang <hayeswang@realtek.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Move the following functions forward.

	r8152_mmd_indirect()
	r8152_mmd_read()
	r8152_mmd_write()
	r8152_eee_en()
	r8152b_enable_eee()
	r8153_eee_en()
	r8153_enable_eee()
	r8152b_enable_fc()
	r8153_aldps_en()
Signed-off-by: NHayes Wang <hayeswang@realtek.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

We were missing check for 25G and 100G while checking port speed,
which lead to less number of queues getting allocated for 25G & 100G
adapters and leading to low throughput. Adding the missing check for
both NIC and vNIC driver.

Also fixes port advertisement for 25G and 100G in ethtool output.
Signed-off-by: NHariprasad Shenai <hariprasad@chelsio.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Merge tag 'linux-can-fixes-for-4.8-20160919' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can

Marc Kleine-Budde says:

====================
pull-request: can 2016-09-19

this is a pull request of one patch for the upcoming linux-4.8 release.

The patch by Fabio Estevam fixes the pm handling in the flexcan driver.
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Pull usercopy hardening fix from Kees Cook:
 "Expand the arm64 vmalloc check to include skipping the module space
  too"

* tag 'usercopy-v4.8-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
  mm: usercopy: Check for module addresses