提交 8d58790b 编写于 作者: M Marek Vasut 提交者: Marc Kleine-Budde

net: can: ifi: Configure transmitter delay

Configure the transmitter delay register at +0x1c to correctly handle
the CAN FD bitrate switch (BRS). This moves the SSP (secondary sample
point) to a proper offset, so that the TDC mechanism works and won't
generate error frames on the CAN link.
Signed-off-by: NMarek Vasut <marex@denx.de>
Cc: Marc Kleine-Budde <mkl@pengutronix.de>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Oliver Hartkopp <socketcan@hartkopp.net>
Cc: Wolfgang Grandegger <wg@grandegger.com>
Cc: linux-stable <stable@vger.kernel.org>
Signed-off-by: NMarc Kleine-Budde <mkl@pengutronix.de>
上级 b5036cd4
......@@ -81,6 +81,10 @@
#define IFI_CANFD_TIME_SET_TIMEA_4_12_6_6 BIT(15)
#define IFI_CANFD_TDELAY 0x1c
#define IFI_CANFD_TDELAY_DEFAULT 0xb
#define IFI_CANFD_TDELAY_MASK 0x3fff
#define IFI_CANFD_TDELAY_ABS BIT(14)
#define IFI_CANFD_TDELAY_EN BIT(15)
#define IFI_CANFD_ERROR 0x20
#define IFI_CANFD_ERROR_TX_OFFSET 0
......@@ -641,7 +645,7 @@ static void ifi_canfd_set_bittiming(struct net_device *ndev)
struct ifi_canfd_priv *priv = netdev_priv(ndev);
const struct can_bittiming *bt = &priv->can.bittiming;
const struct can_bittiming *dbt = &priv->can.data_bittiming;
u16 brp, sjw, tseg1, tseg2;
u16 brp, sjw, tseg1, tseg2, tdc;
/* Configure bit timing */
brp = bt->brp - 2;
......@@ -664,6 +668,11 @@ static void ifi_canfd_set_bittiming(struct net_device *ndev)
(brp << IFI_CANFD_TIME_PRESCALE_OFF) |
(sjw << IFI_CANFD_TIME_SJW_OFF_7_9_8_8),
priv->base + IFI_CANFD_FTIME);
/* Configure transmitter delay */
tdc = (dbt->brp * (dbt->phase_seg1 + 1)) & IFI_CANFD_TDELAY_MASK;
writel(IFI_CANFD_TDELAY_EN | IFI_CANFD_TDELAY_ABS | tdc,
priv->base + IFI_CANFD_TDELAY);
}
static void ifi_canfd_set_filter(struct net_device *ndev, const u32 id,
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册