In the future there will be situations where queues can accept either
kernel allocated CBs or user allocated CBs, depending on different
states.

Therefore, instead of using a boolean variable of kernel/user allocated
CB, we need to use a bitmask to indicate that, which will allow to
combine the two options.

Add a flag to the uapi so the user will be able to indicate whether
the CB was allocated by kernel or by user. Of course the driver
validates that.
Signed-off-by: NTal Cohen <talcohen@habana.ai>
Reviewed-by: NOded Gabbay <ogabbay@kernel.org>
Signed-off-by: NOded Gabbay <ogabbay@kernel.org>

Initialize the QMANs that are responsible to submit doorbells to the NIC
engines. Add support for stopping and disabling them, and reset them as
part of the hard-reset procedure of GAUDI. This will allow the user to
submit work to the NICs.

Add support for receiving events on QMAN errors from the firmware.

However, the nic_ports_mask is still initialized to 0. That means this code
won't initialize the QMANs just yet. That will be in a later patch.
Signed-off-by: NOmer Shpigelman <oshpigelman@habana.ai>
Reviewed-by: NOded Gabbay <ogabbay@kernel.org>
Signed-off-by: NOded Gabbay <ogabbay@kernel.org>

Configure the security properties of the NIC IP. This is to prevent the
user process from doing something with the NIC that he shouldn't do. e.g.
crash the server, steal data, etc.
Signed-off-by: NOmer Shpigelman <oshpigelman@habana.ai>
Reviewed-by: NOded Gabbay <ogabbay@kernel.org>
Signed-off-by: NOded Gabbay <ogabbay@kernel.org>

Add new structures and messages that the driver use to interact with the
firmware to receive information and events (errors) about GAUDI's NIC.
Signed-off-by: NOmer Shpigelman <oshpigelman@habana.ai>
Reviewed-by: NOded Gabbay <ogabbay@kernel.org>
Signed-off-by: NOded Gabbay <ogabbay@kernel.org>

Add auto-generated header files that describe the NIC QMANs registers
used by the driver.
Signed-off-by: NOmer Shpigelman <oshpigelman@habana.ai>
Reviewed-by: NOded Gabbay <ogabbay@kernel.org>
Signed-off-by: NOded Gabbay <ogabbay@kernel.org>

We already check if queue index is smaller than max queues a few lines
above this check so no need to check this again.
Signed-off-by: NOded Gabbay <ogabbay@kernel.org>

Refactor sync stream implementation by reducing function length
for better readability.
Signed-off-by: NOfir Bitton <obitton@habana.ai>
Reviewed-by: NOded Gabbay <ogabbay@kernel.org>
Signed-off-by: NOded Gabbay <ogabbay@kernel.org>

Support advanced monitor functionality to monitor more than a
single SOB. In addition expand all CB generation functions
with buffer offset in order to put in them multiple packets that are
generated by different functions.
Signed-off-by: NOfir Bitton <obitton@habana.ai>
Reviewed-by: NOded Gabbay <ogabbay@kernel.org>
Signed-off-by: NOded Gabbay <ogabbay@kernel.org>

Refactor sync stream implementation by adding more structures for
better readability. In addition reducing allocated resources.
Signed-off-by: NOfir Bitton <obitton@habana.ai>
Reviewed-by: NOded Gabbay <ogabbay@kernel.org>
Signed-off-by: NOded Gabbay <ogabbay@kernel.org>

In case we are running without MMU enabled (debug mode), no need to
initialize the VM module in the driver.
Signed-off-by: NOded Gabbay <ogabbay@kernel.org>

No need to print when the driver starts to initialize the H/W. Drivers
should be silent when everything is OK.
Signed-off-by: NOded Gabbay <ogabbay@kernel.org>

The driver now loads the firmware in two stages. For debugging purposes
we need to support situations where only the first stage firmware is
loaded.

Therefore, use a bitmask to determine which F/W is loaded
Signed-off-by: NOded Gabbay <ogabbay@kernel.org>

F/W can be loaded but device CPU queues disabled. In that case, HWMON
should be disabled. This is only relevant when debugging
Signed-off-by: NOded Gabbay <ogabbay@kernel.org>

Currently mmu_prepare is located at context switch.
Since we support a single context, no reason to reconfigure
the MMU registers every context switch.
Signed-off-by: NOfir Bitton <obitton@habana.ai>
Reviewed-by: NOded Gabbay <ogabbay@kernel.org>
Signed-off-by: NOded Gabbay <ogabbay@kernel.org>

In case we will have multiple contexts/processes, we can't just
increment aggregated counters. We need to make them atomic as they can
be incremented by multiple processes
Signed-off-by: NOded Gabbay <ogabbay@kernel.org>

There is missing statement and missing "break;" in the ECC handling
code in gaudi.c
This will cause a wrong behavior upon certain ECC interrupts.
Signed-off-by: NOded Gabbay <ogabbay@kernel.org>

To save the interested reader some time, add examples of AT25 part
numbers that correspond to EEPROMs rather than flashes.
Signed-off-by: NJonathan Neuschäfer <j.neuschaefer@gmx.net>
Link: https://lore.kernel.org/r/20201107133337.1066271-1-j.neuschaefer@gmx.netSigned-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

The spelling of "Hisilicon" is modified.
Reviewed-by: NZhou Wang <wangzhou1@hisilicon.com>
Reviewed-by: NJonathan Cameron <Jonathan.Cameron@Huawei.com>
Acked-by: NZhangfei Gao <zhangfei.gao@linaro.org>
Signed-off-by: NKai Ye <yekai13@huawei.com>
Link: https://lore.kernel.org/r/1604309965-21752-3-git-send-email-yekai13@huawei.comSigned-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Delete some redundant code.
Reviewed-by: NZhou Wang <wangzhou1@hisilicon.com>
Reviewed-by: NJonathan Cameron <Jonathan.Cameron@Huawei.com>
Acked-by: NZhangfei Gao <zhangfei.gao@linaro.org>
Signed-off-by: NKai Ye <yekai13@huawei.com>
Link: https://lore.kernel.org/r/1604309965-21752-2-git-send-email-yekai13@huawei.comSigned-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

A function has a different name between their prototype
and its kernel-doc markup.
Signed-off-by: NMauro Carvalho Chehab <mchehab+huawei@kernel.org>
Link: https://lore.kernel.org/r/56b4cc6308fe6b6133b95c7d9116ed6fbaaabe9f.1603469755.git.mchehab+huawei@kernel.orgSigned-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

This interrupt cause is not relevant because of how the user use the
QMAN arbitration mechanism. We must mask it as the log explodes with it.
Signed-off-by: NOded Gabbay <ogabbay@kernel.org>

We must relocate the coresight mmu configuration to the coresight
flow to make it work in case the first submission is to configure
the profiler.
Signed-off-by: NOfir Bitton <obitton@habana.ai>
Reviewed-by: NOded Gabbay <ogabbay@kernel.org>
Signed-off-by: NOded Gabbay <ogabbay@kernel.org>

All throughout the driver, normal kernel pointers are
stored as 'u64' struct members, which is kind of silly
and requires casting through a uintptr_t to void* every
time they are used.

There is one line that missed the intermediate uintptr_t
case, which leads to a compiler warning:

drivers/misc/habanalabs/common/command_buffer.c: In function 'hl_cb_mmap':
drivers/misc/habanalabs/common/command_buffer.c:512:44: warning: cast to pointer from integer of different size [-Wint-to-pointer-cast]
  512 |  rc = hdev->asic_funcs->cb_mmap(hdev, vma, (void *) cb->kernel_address,

Rather than adding one more cast, just fix the type and
remove all the other casts.

Fixes: 0db57535 ("habanalabs: make use of dma_mmap_coherent")
Signed-off-by: NArnd Bergmann <arnd@arndb.de>
Acked-by: NChristoph Hellwig <hch@lst.de>
Reviewed-by: NOded Gabbay <oded.gabbay@gmail.com>
Signed-off-by: NOded Gabbay <ogabbay@kernel.org>

A receive callback is queued while the client is still connected
but can still be called after the client was disconnected. Upon
disconnect cl->me_cl is set to NULL, hence we need to check
that ME client is not-NULL in mei_cl_mtu to avoid
null dereference.

Cc: <stable@vger.kernel.org>
Signed-off-by: NAlexander Usyskin <alexander.usyskin@intel.com>
Signed-off-by: NTomas Winkler <tomas.winkler@intel.com>
Link: https://lore.kernel.org/r/20201029095444.957924-2-tomas.winkler@intel.comSigned-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

If the initialization procedure for receive or receive callback
registration on the client bus has failed the caller can't re-run it.
Deinitilize the callback pointers and cancel the work
to allow the caller to retry.
Signed-off-by: NAlexander Usyskin <alexander.usyskin@intel.com>
Signed-off-by: NTomas Winkler <tomas.winkler@intel.com>
Link: https://lore.kernel.org/r/20201029095444.957924-4-tomas.winkler@intel.comSigned-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Avoid queuing reads and registering rx callbacks in
case the client is not connected, to prevent null
dereferencing and memory leaks.
Signed-off-by: NAlexander Usyskin <alexander.usyskin@intel.com>
Signed-off-by: NTomas Winkler <tomas.winkler@intel.com>
Link: https://lore.kernel.org/r/20201029095444.957924-3-tomas.winkler@intel.comSigned-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Fixes the following W=1 kernel build warning(s):

 drivers/misc/ocxl/config.c:81: warning: Function parameter or member 'dev' not described in 'get_function_0'
 drivers/misc/ocxl/config.c:81: warning: Excess function parameter 'device' description in 'get_function_0'

Cc: Frederic Barrat <fbarrat@linux.ibm.com>
Cc: Andrew Donnellan <ajd@linux.ibm.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: linuxppc-dev@lists.ozlabs.org
Acked-by: NFrederic Barrat <fbarrat@linux.ibm.com>
Acked-by: NAndrew Donnellan <ajd@linux.ibm.com>
Signed-off-by: NLee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20201102142001.560490-2-lee.jones@linaro.orgSigned-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Currently the 'c2dev' device data is not initialised when it's
allocated.  There maybe an issue when using strncpy() to populate the
'name' attribute since a NUL terminator may not be provided in all
use-cases.  To prevent such a failing, let's ensure the 'c2dev'
device data area is fully zeroed out on allocation.

Cc: Rodolfo Giometti <giometti@enneenne.com>
Cc: "Eurotech S.p.A" <info@eurotech.it>
Cc: David Laight <David.Laight@aculab.com>
Reported-by: NGeert Uytterhoeven <geert+renesas@glider.be>
Acked-by: NArnd Bergmann <arnd@arndb.de>
Signed-off-by: NLee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20201102142001.560490-1-lee.jones@linaro.orgSigned-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

if (_IOC_TYPE(cmd) != PP_IOCTL)
        return -ENOTTY;

Invalid ioctl command check normally performs by “default” case.

if (_IOC_DIR(cmd) != _IOC_NONE) {
       argp = (void __user *)arg;
       if (!argp)
             return -EINVAL; }

And for checking ioctl arguments, copy_from_user()/copy_to_user()
checks are enough.
Reviewed-by: NArnd Bergmann <arnd@arndb.de>
Signed-off-by: NHarshal Chaudhari <harshalchau04@gmail.com>
Link: https://lore.kernel.org/r/20201101170949.18616-1-harshalchau04@gmail.comSigned-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

The first condition of the if statement can never be true, because
bar variable is an enum variable type defined between 0 and 5, and
also bar variable acquires the value from arg function parameter which
is an unsigned long variable.

The constant 5 was replaced the the equivalent enum type, in this case
BAR_5.
Signed-off-by: NGustavo Pimentel <gustavo.pimentel@synopsys.com>
Link: https://lore.kernel.org/r/142cbbc215bed4243a219ea17b46f4256ceccb22.1603315690.git.gustavo.pimentel@synopsys.comSigned-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

A semicolon is not needed after a switch statement.
Signed-off-by: NTom Rix <trix@redhat.com>
Link: https://lore.kernel.org/r/20201031152456.2146104-1-trix@redhat.comSigned-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

A break is not needed if it is preceded by a return
Signed-off-by: NTom Rix <trix@redhat.com>
Link: https://lore.kernel.org/r/20201019191808.9891-1-trix@redhat.comSigned-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

There is a regular need in the kernel to provide a way to declare having a
dynamically sized set of trailing elements in a structure. Kernel code should
always use “flexible array members”[1] for these cases. The older style of
one-element or zero-length arrays should no longer be used[2].

[1] https://en.wikipedia.org/wiki/Flexible_array_member
[2] https://www.kernel.org/doc/html/v5.9/process/deprecated.html#zero-length-and-one-element-arraysSigned-off-by: NGustavo A. R. Silva <gustavoars@kernel.org>

Driver has a trivial helper function to convert
the pointer argument and then call the native ioctl handler.
But now we have a generic implementation for that, so we can use it.
Signed-off-by: NHarshal Chaudhari <harshalchau04@gmail.com>
Link: https://lore.kernel.org/r/20201026155801.16053-1-harshalchau04@gmail.comSigned-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Coccinelle suggested using PTR_ERR_OR_ZERO() and looking at the code,
we can use PTR_ERR_OR_ZERO() instead of checking IS_ERR() and then
doing 'return 0'.
Tested-by: NLukas Bulwahn <lukas.bulwahn@gmail.com>
Signed-off-by: NSudip Mukherjee <sudipm.mukherjee@gmail.com>
Link: https://lore.kernel.org/r/20201026180026.3350-1-sudipm.mukherjee@gmail.comSigned-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

This patch removes the MIC drivers from the kernel tree
since the corresponding devices have been discontinued.

Removing the dma and char-misc changes in one patch and
merging via the char-misc tree is best to avoid any
potential build breakage.

Cc: Nikhil Rao <nikhil.rao@intel.com>
Reviewed-by: NAshutosh Dixit <ashutosh.dixit@intel.com>
Signed-off-by: NSudeep Dutt <sudeep.dutt@intel.com>
Acked-By: NVinod Koul <vkoul@kernel.org>
Reviewed-by: NSherry Sun <sherry.sun@nxp.com>
Link: https://lore.kernel.org/r/8c1443136563de34699d2c084df478181c205db4.1603854416.git.sudeep.dutt@intel.comSigned-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

The dependency should be just USB_ROLE_SWITCH, instead
of CONFIG_USB_ROLE_SWITCH.

Fixes: 2827d98b ("misc: Kconfig: add a new dependency for HISI_HIKEY_USB")
Reported-by: NNathan Chancellor <natechancellor@gmail.com>
Reviewed-by: NNathan Chancellor <natechancellor@gmail.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab+huawei@kernel.org>
Link: https://lore.kernel.org/r/0b6dff854c4bb412c2c11f17803e84d61385415f.1602138248.git.mchehab+huawei@kernel.orgSigned-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

As warned by Randy:

	on x86_64:
	CONFIG_USB_ROLE_SWITCH=m
	and HISI_HIKEY_USB=y.

	ld: drivers/misc/hisi_hikey_usb.o: in function `hisi_hikey_usb_remove':
	hisi_hikey_usb.c:(.text+0x61): undefined reference to `usb_role_switch_unregister'
	ld: hisi_hikey_usb.c:(.text+0xa4): undefined reference to `usb_role_switch_put'
	ld: drivers/misc/hisi_hikey_usb.o: in function `hub_usb_role_switch_set':
	hisi_hikey_usb.c:(.text+0xd3): undefined reference to `usb_role_switch_get_drvdata'
	ld: drivers/misc/hisi_hikey_usb.o: in function `relay_set_role_switch':
	hisi_hikey_usb.c:(.text+0x54d): undefined reference to `usb_role_switch_set_role'
	ld: drivers/misc/hisi_hikey_usb.o: in function `hisi_hikey_usb_probe':
	hisi_hikey_usb.c:(.text+0x8a5): undefined reference to `usb_role_switch_get'
	ld: hisi_hikey_usb.c:(.text+0xa08): undefined reference to `usb_role_switch_register'
	ld: hisi_hikey_usb.c:(.text+0xa6e): undefined reference to `usb_role_switch_put'

Make it dependent on CONFIG_USB_ROLE_SWITCH.
Reported-by: NRandy Dunlap <rdunlap@infradead.org>
Acked-by: Randy Dunlap <rdunlap@infradead.org> # build-tested
Signed-off-by: NMauro Carvalho Chehab <mchehab+huawei@kernel.org>
Link: https://lore.kernel.org/r/0e49432d0db9ee8429a9923a1d995935b6b83552.1602047370.git.mchehab+huawei@kernel.orgSigned-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Add Copyrights to those files that have been updated for UV5 changes.
Signed-off-by: NMike Travis <mike.travis@hpe.com>
Signed-off-by: NBorislav Petkov <bp@suse.de>
Link: https://lkml.kernel.org/r/20201005203929.148656-14-mike.travis@hpe.com

Update UV MMRs in uv_mmrs.h for UV5 based on Verilog output from the
UV Hub hardware design files.  This is the next UV architecture with
a new class (UVY) being defined for 52 bit physical address masks.
Uses a bitmask for UV arch identification so a single test can cover
multiple versions.  Includes other adjustments to match the uv_mmrs.h
file to keep from encountering compile errors.  New UV5 functionality
is added in the patches that follow.

[ Fix W=1 build warnings. ]
Reported-by: Nkernel test robot <lkp@intel.com>
Signed-off-by: NMike Travis <mike.travis@hpe.com>
Signed-off-by: NBorislav Petkov <bp@suse.de>
Reviewed-by: NSteve Wahl <steve.wahl@hpe.com>
Link: https://lkml.kernel.org/r/20201005203929.148656-5-mike.travis@hpe.com