This patch changes memcg's behavior at task_move().

At task_move(), the kernel scans a task's page table and move the changes
for mapped pages from source cgroup to target cgroup.  There has been a
bug at handling shared anonymous pages for a long time.

Before patch:
  - The spec says 'shared anonymous pages are not moved.'
  - The implementation was 'shared anonymoys pages may be moved'.
    If page_mapcount <=2, shared anonymous pages's charge were moved.

After patch:
  - The spec says 'all anonymous pages are moved'.
  - The implementation is 'all anonymous pages are moved'.

Considering usage of memcg, this will not affect user's experience.
'shared anonymous' pages only exists between a tree of processes which
don't do exec().  Moving one of process without exec() seems not sane.
For example, libcgroup will not be affected by this change.  (Anyway, no
one noticed the implementation for a long time...)

Below is a discussion log:

 - current spec/implementation are complex
 - Now, shared file caches are moved
 - It adds unclear check as page_mapcount(). To do correct check,
   we should check swap users, etc.
 - No one notice this implementation behavior. So, no one get benefit
   from the design.
 - In general, once task is moved to a cgroup for running, it will not
   be moved....
 - Finally, we have control knob as memory.move_charge_at_immigrate.

Here is a patch to allow moving shared pages, completely. This makes
memcg simpler and fix current broken code.
Suggested-by: NHugh Dickins <hughd@google.com>
Signed-off-by: NKAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Acked-by: NMichal Hocko <mhocko@suse.cz>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Cc: Glauber Costa <glommer@parallels.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Transparent huge pages can change page->flags (PG_compound_lock) without
taking Slab lock.  Since THP can not break slab pages we can safely access
compound page without taking compound lock.

Specifically this patch fixes a race between compound_unlock() and slab
functions which perform page-flags updates.  This can occur when
get_page()/put_page() is called on a page from slab.

[akpm@linux-foundation.org: tweak comment text, fix comment layout, fix label indenting]
Reported-by: NAmey Bhide <abhide@nicira.com>
Signed-off-by: NPravin B Shelar <pshelar@nicira.com>
Reviewed-by: NChristoph Lameter <cl@linux.com>
Acked-by: NAndrea Arcangeli <aarcange@redhat.com>
Cc: Pekka Enberg <penberg@cs.helsinki.fi>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

When holding the mmap_sem for reading, pmd_offset_map_lock should only
run on a pmd_t that has been read atomically from the pmdp pointer,
otherwise we may read only half of it leading to this crash.

PID: 11679  TASK: f06e8000  CPU: 3   COMMAND: "do_race_2_panic"
 #0 [f06a9dd8] crash_kexec at c049b5ec
 #1 [f06a9e2c] oops_end at c083d1c2
 #2 [f06a9e40] no_context at c0433ded
 #3 [f06a9e64] bad_area_nosemaphore at c043401a
 #4 [f06a9e6c] __do_page_fault at c0434493
 #5 [f06a9eec] do_page_fault at c083eb45
 #6 [f06a9f04] error_code (via page_fault) at c083c5d5
    EAX: 01fb470c EBX: fff35000 ECX: 00000003 EDX: 00000100 EBP:
    00000000
    DS:  007b     ESI: 9e201000 ES:  007b     EDI: 01fb4700 GS:  00e0
    CS:  0060     EIP: c083bc14 ERR: ffffffff EFLAGS: 00010246
 #7 [f06a9f38] _spin_lock at c083bc14
 #8 [f06a9f44] sys_mincore at c0507b7d
 #9 [f06a9fb0] system_call at c083becd
                         start           len
    EAX: ffffffda  EBX: 9e200000  ECX: 00001000  EDX: 6228537f
    DS:  007b      ESI: 00000000  ES:  007b      EDI: 003d0f00
    SS:  007b      ESP: 62285354  EBP: 62285388  GS:  0033
    CS:  0073      EIP: 00291416  ERR: 000000da  EFLAGS: 00000286

This should be a longstanding bug affecting x86 32bit PAE without THP.
Only archs with 64bit large pmd_t and 32bit unsigned long should be
affected.

With THP enabled the barrier() in pmd_none_or_trans_huge_or_clear_bad()
would partly hide the bug when the pmd transition from none to stable,
by forcing a re-read of the *pmd in pmd_offset_map_lock, but when THP is
enabled a new set of problem arises by the fact could then transition
freely in any of the none, pmd_trans_huge or pmd_trans_stable states.
So making the barrier in pmd_none_or_trans_huge_or_clear_bad()
unconditional isn't good idea and it would be a flakey solution.

This should be fully fixed by introducing a pmd_read_atomic that reads
the pmd in order with THP disabled, or by reading the pmd atomically
with cmpxchg8b with THP enabled.

Luckily this new race condition only triggers in the places that must
already be covered by pmd_none_or_trans_huge_or_clear_bad() so the fix
is localized there but this bug is not related to THP.

NOTE: this can trigger on x86 32bit systems with PAE enabled with more
than 4G of ram, otherwise the high part of the pmd will never risk to be
truncated because it would be zero at all times, in turn so hiding the
SMP race.

This bug was discovered and fully debugged by Ulrich, quote:

----
[..]
pmd_none_or_trans_huge_or_clear_bad() loads the content of edx and
eax.

    496 static inline int pmd_none_or_trans_huge_or_clear_bad(pmd_t
    *pmd)
    497 {
    498         /* depend on compiler for an atomic pmd read */
    499         pmd_t pmdval = *pmd;

                                // edi = pmd pointer
0xc0507a74 <sys_mincore+548>:   mov    0x8(%esp),%edi
...
                                // edx = PTE page table high address
0xc0507a84 <sys_mincore+564>:   mov    0x4(%edi),%edx
...
                                // eax = PTE page table low address
0xc0507a8e <sys_mincore+574>:   mov    (%edi),%eax

[..]

Please note that the PMD is not read atomically. These are two "mov"
instructions where the high order bits of the PMD entry are fetched
first. Hence, the above machine code is prone to the following race.

-  The PMD entry {high|low} is 0x0000000000000000.
   The "mov" at 0xc0507a84 loads 0x00000000 into edx.

-  A page fault (on another CPU) sneaks in between the two "mov"
   instructions and instantiates the PMD.

-  The PMD entry {high|low} is now 0x00000003fda38067.
   The "mov" at 0xc0507a8e loads 0xfda38067 into eax.
----
Reported-by: NUlrich Obergfell <uobergfe@redhat.com>
Signed-off-by: NAndrea Arcangeli <aarcange@redhat.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Hugh Dickins <hughd@google.com>
Cc: Larry Woodman <lwoodman@redhat.com>
Cc: Petr Matousek <pmatouse@redhat.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The oom_score_adj scale ranges from -1000 to 1000 and represents the
proportion of memory available to the process at allocation time.  This
means an oom_score_adj value of 300, for example, will bias a process as
though it was using an extra 30.0% of available memory and a value of
-350 will discount 35.0% of available memory from its usage.

The oom killer badness heuristic also uses this scale to report the oom
score for each eligible process in determining the "best" process to
kill.  Thus, it can only differentiate each process's memory usage by
0.1% of system RAM.

On large systems, this can end up being a large amount of memory: 256MB
on 256GB systems, for example.

This can be fixed by having the badness heuristic to use the actual
memory usage in scoring threads and then normalizing it to the
oom_score_adj scale for userspace.  This results in better comparison
between eligible threads for kill and no change from the userspace
perspective.
Suggested-by: NKOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Tested-by: NDave Jones <davej@redhat.com>
Signed-off-by: NDavid Rientjes <rientjes@google.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Remove vmtruncate_range(), and remove the truncate_range method from
struct inode_operations: only tmpfs ever supported it, and tmpfs has now
converted over to using the fallocate method of file_operations.

Update Documentation accordingly, adding (setlease and) fallocate lines.
And while we're in mm.h, remove duplicate declarations of shmem_lock() and
shmem_file_setup(): everyone is now using the ones in shmem_fs.h.
Based-on-patch-by: NCong Wang <amwang@redhat.com>
Signed-off-by: NHugh Dickins <hughd@google.com>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Cong Wang <amwang@redhat.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The GMA500 GPU driver uses GEM shmem objects, but with a new twist: the
backing RAM has to be below 4GB.  Not a problem while the boards
supported only 4GB: but now Intel's D2700MUD boards support 8GB, and
their GMA3600 is managed by the GMA500 driver.

shmem/tmpfs has never pretended to support hardware restrictions on the
backing memory, but it might have appeared to do so before v3.1, and
even now it works fine until a page is swapped out then back in.  When
read_cache_page_gfp() supplied a freshly allocated page for copy, that
compensated for whatever choice might have been made by earlier swapin
readahead; but swapoff was likely to destroy the illusion.

We'd like to continue to support GMA500, so now add a new
shmem_should_replace_page() check on the zone when about to move a page
from swapcache to filecache (in swapin and swapoff cases), with
shmem_replace_page() to allocate and substitute a suitable page (given
gma500/gem.c's mapping_set_gfp_mask GFP_KERNEL | __GFP_DMA32).

This does involve a minor extension to mem_cgroup_replace_page_cache()
(the page may or may not have already been charged); and I've removed a
comment and call to mem_cgroup_uncharge_cache_page(), which in fact is
always a no-op while PageSwapCache.

Also removed optimization of an unlikely path in shmem_getpage_gfp(),
now that we need to check PageSwapCache more carefully (a racing caller
might already have made the copy).  And at one point shmem_unuse_inode()
needs to use the hitherto private page_swapcount(), to guard against
racing with inode eviction.

It would make sense to extend shmem_should_replace_page(), to cover
cpuset and NUMA mempolicy restrictions too, but set that aside for now:
needs a cleanup of shmem mempolicy handling, and more testing, and ought
to handle swap faults in do_swap_page() as well as shmem.
Signed-off-by: NHugh Dickins <hughd@google.com>
Cc: Christoph Hellwig <hch@infradead.org>
Acked-by: NKAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Cc: Stephane Marchesin <marcheu@chromium.org>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Dave Airlie <airlied@gmail.com>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Rob Clark <rob.clark@linaro.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

When MIGRATE_UNMOVABLE pages are freed from MIGRATE_UNMOVABLE type
pageblock (and some MIGRATE_MOVABLE pages are left in it) waiting until an
allocation takes ownership of the block may take too long.  The type of
the pageblock remains unchanged so the pageblock cannot be used as a
migration target during compaction.

Fix it by:

* Adding enum compact_mode (COMPACT_ASYNC_[MOVABLE,UNMOVABLE], and
  COMPACT_SYNC) and then converting sync field in struct compact_control
  to use it.

* Adding nr_pageblocks_skipped field to struct compact_control and
  tracking how many destination pageblocks were of MIGRATE_UNMOVABLE type.
   If COMPACT_ASYNC_MOVABLE mode compaction ran fully in
  try_to_compact_pages() (COMPACT_COMPLETE) it implies that there is not a
  suitable page for allocation.  In this case then check how if there were
  enough MIGRATE_UNMOVABLE pageblocks to try a second pass in
  COMPACT_ASYNC_UNMOVABLE mode.

* Scanning the MIGRATE_UNMOVABLE pageblocks (during COMPACT_SYNC and
  COMPACT_ASYNC_UNMOVABLE compaction modes) and building a count based on
  finding PageBuddy pages, page_count(page) == 0 or PageLRU pages.  If all
  pages within the MIGRATE_UNMOVABLE pageblock are in one of those three
  sets change the whole pageblock type to MIGRATE_MOVABLE.

My particular test case (on a ARM EXYNOS4 device with 512 MiB, which means
131072 standard 4KiB pages in 'Normal' zone) is to:

- allocate 120000 pages for kernel's usage
- free every second page (60000 pages) of memory just allocated
- allocate and use 60000 pages from user space
- free remaining 60000 pages of kernel memory
  (now we have fragmented memory occupied mostly by user space pages)
- try to allocate 100 order-9 (2048 KiB) pages for kernel's usage

The results:
- with compaction disabled I get 11 successful allocations
- with compaction enabled - 14 successful allocations
- with this patch I'm able to get all 100 successful allocations

NOTE: If we can make kswapd aware of order-0 request during compaction, we
can enhance kswapd with changing mode to COMPACT_ASYNC_FULL
(COMPACT_ASYNC_MOVABLE + COMPACT_ASYNC_UNMOVABLE).  Please see the
following thread:

	http://marc.info/?l=linux-mm&m=133552069417068&w=2

[minchan@kernel.org: minor cleanups]
Cc: Mel Gorman <mgorman@suse.de>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Rik van Riel <riel@redhat.com>
Cc: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: NBartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

alloc_bootmem_section() derives allocation area constraints from the
specified sparsemem section.  This is a bit specific for a generic memory
allocator like bootmem, though, so move it over to sparsemem.

As __alloc_bootmem_node_nopanic() already retries failed allocations with
relaxed area constraints, the fallback code in sparsemem.c can be removed
and the code becomes a bit more compact overall.

[akpm@linux-foundation.org: fix build]
Signed-off-by: NJohannes Weiner <hannes@cmpxchg.org>
Acked-by: NTejun Heo <tj@kernel.org>
Acked-by: NDavid S. Miller <davem@davemloft.net>
Cc: Yinghai Lu <yinghai@kernel.org>
Cc: Gavin Shan <shangw@linux.vnet.ibm.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

When transparent_hugepage_enabled() is used outside mm/, such as in
arch/x86/xx/tlb.c:

+       if (!cpu_has_invlpg || vma->vm_flags & VM_HUGETLB
+                       || transparent_hugepage_enabled(vma)) {
+               flush_tlb_mm(vma->vm_mm);

is_vma_temporary_stack() isn't referenced in huge_mm.h, so it has compile
errors:

  arch/x86/mm/tlb.c: In function `flush_tlb_range':
  arch/x86/mm/tlb.c:324:4: error: implicit declaration of function `is_vma_temporary_stack' [-Werror=implicit-function-declaration]

Since is_vma_temporay_stack() is just used in rmap.c and huge_memory.c, it
is better to move it to huge_mm.h from rmap.h to avoid such errors.
Signed-off-by: NAlex Shi <alex.shi@intel.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Programs using /proc/kpageflags need to know about the various flags.  The
<linux/kernel-page-flags.h> provides them and the comments in the file
indicate that it is supposed to be used by user-level code.  But the file
is not installed.

Install the headers and mark the unstable flags as out-of-bounds.  The
page-type tool is also adjusted to not duplicate the definitions
Signed-off-by: NUlrich Drepper <drepper@gmail.com>
Acked-by: NKOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Acked-by: NFengguang Wu <fengguang.wu@intel.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Even if CONFIG_DEBUG_VM=n gcc genereates code for some VM_BUG_ON()

for example VM_BUG_ON(!PageCompound(page) || !PageHead(page)); in
do_huge_pmd_wp_page() generates 114 bytes of code.

But they mostly disappears when I split this VM_BUG_ON into two:

  -VM_BUG_ON(!PageCompound(page) || !PageHead(page));
  +VM_BUG_ON(!PageCompound(page));
  +VM_BUG_ON(!PageHead(page));

weird... but anyway after this patch code disappears completely.

  add/remove: 0/0 grow/shrink: 7/97 up/down: 135/-1784 (-1649)
Signed-off-by: NKonstantin Khlebnikov <khlebnikov@openvz.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Cong Wang <xiyou.wangcong@gmail.com>
Cc: Hugh Dickins <hughd@google.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Sometimes we want to check some expressions correctness at compile time.
"(void)(e);" or "if (e);" can be dangerous if the expression has
side-effects, and gcc sometimes generates a lot of code, even if the
expression has no effect.

This patch introduces macro BUILD_BUG_ON_INVALID() for such checks, it
forces a compilation error if expression is invalid without any extra
code.

[Cast to "long" required because sizeof does not work for bit-fields.]
Signed-off-by: NKonstantin Khlebnikov <khlebnikov@openvz.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Cong Wang <xiyou.wangcong@gmail.com>
Cc: Hugh Dickins <hughd@google.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The rmap walker checking page table references has historically ignored
references from VMAs that were not part of the memcg that was being
reclaimed during memcg hard limit reclaim.

When transitioning global reclaim to memcg hierarchy reclaim, I missed
that bit and now references from outside a memcg are ignored even during
global reclaim.

Reverting back to traditional behaviour - count all references during
global reclaim and only mind references of the memcg being reclaimed
during limit reclaim would be one option.

However, the more generic idea is to ignore references exactly then when
they are outside the hierarchy that is currently under reclaim; because
only then will their reclamation be of any use to help the pressure
situation.  It makes no sense to ignore references from a sibling memcg
and then evict a page that will be immediately refaulted by that sibling
which contributes to the same usage of the common ancestor under
reclaim.

The solution: make the rmap walker ignore references from VMAs that are
not part of the hierarchy that is being reclaimed.

Flat limit reclaim will stay the same, hierarchical limit reclaim will
mind the references only to pages that the hierarchy owns.  Global
reclaim, since it reclaims from all memcgs, will be fixed to regard all
references.

[akpm@linux-foundation.org: name the args in the declaration]
Signed-off-by: NJohannes Weiner <hannes@cmpxchg.org>
Reported-by: NKonstantin Khlebnikov <khlebnikov@openvz.org>
Acked-by: Konstantin Khlebnikov<khlebnikov@openvz.org>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Acked-by: NMichal Hocko <mhocko@suse.cz>
Cc: Li Zefan <lizf@cn.fujitsu.com>
Cc: Li Zefan <lizf@cn.fujitsu.com>
Cc: Tejun Heo <tj@kernel.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

s/from_nodes/from and s/to_nodes/to/.  The "_nodes" is redundant - it
duplicates the argument's type.

Done in a fit of irritation over 80-col issues :(

Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: KOSAKI Motohiro <mkosaki@redhat.com>
Cc: Larry Woodman <lwoodman@redhat.com>
Cc: Mel Gorman <mel@csn.ul.ie>
Cc: Rik van Riel <riel@redhat.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

There is little motiviation for reclaim_mode_t once RECLAIM_MODE_[A]SYNC
and lumpy reclaim have been removed.  This patch gets rid of
reclaim_mode_t as well and improves the documentation about what
reclaim/compaction is and when it is triggered.
Signed-off-by: NMel Gorman <mgorman@suse.de>
Acked-by: NRik van Riel <riel@redhat.com>
Acked-by: NKOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: Konstantin Khlebnikov <khlebnikov@openvz.org>
Cc: Hugh Dickins <hughd@google.com>
Cc: Ying Han <yinghan@google.com>
Cc: Andy Whitcroft <apw@shadowen.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

This patch stops reclaim/compaction entering sync reclaim as this was
only intended for lumpy reclaim and an oversight.  Page migration has
its own logic for stalling on writeback pages if necessary and memory
compaction is already using it.

Waiting on page writeback is bad for a number of reasons but the primary
one is that waiting on writeback to a slow device like USB can take a
considerable length of time.  Page reclaim instead uses
wait_iff_congested() to throttle if too many dirty pages are being
scanned.
Signed-off-by: NMel Gorman <mgorman@suse.de>
Acked-by: NRik van Riel <riel@redhat.com>
Acked-by: NKOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: Konstantin Khlebnikov <khlebnikov@openvz.org>
Cc: Hugh Dickins <hughd@google.com>
Cc: Ying Han <yinghan@google.com>
Cc: Andy Whitcroft <apw@shadowen.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

This series removes lumpy reclaim and some stalling logic that was
unintentionally being used by memory compaction.  The end result is that
stalling on dirty pages during page reclaim now depends on
wait_iff_congested().

Four kernels were compared

  3.3.0     vanilla
  3.4.0-rc2 vanilla
  3.4.0-rc2 lumpyremove-v2 is patch one from this series
  3.4.0-rc2 nosync-v2r3 is the full series

Removing lumpy reclaim saves almost 900 bytes of text whereas the full
series removes 1200 bytes.

     text     data      bss       dec     hex  filename
  67403754  1927944  2260992  10929311  a6c49f  vmlinux-3.4.0-rc2-vanilla
  6739479  1927944  2260992  10928415  a6c11f  vmlinux-3.4.0-rc2-lumpyremove-v2
  6739159  1927944  2260992  10928095  a6bfdf  vmlinux-3.4.0-rc2-nosync-v2

There are behaviour changes in the series and so tests were run with
monitoring of ftrace events.  This disrupts results so the performance
results are distorted but the new behaviour should be clearer.

fs-mark running in a threaded configuration showed little of interest as
it did not push reclaim aggressively

  FS-Mark Multi Threaded
                          3.3.0-vanilla       rc2-vanilla       lumpyremove-v2r3       nosync-v2r3
  Files/s  min           3.20 ( 0.00%)        3.20 ( 0.00%)        3.20 ( 0.00%)        3.20 ( 0.00%)
  Files/s  mean          3.20 ( 0.00%)        3.20 ( 0.00%)        3.20 ( 0.00%)        3.20 ( 0.00%)
  Files/s  stddev        0.00 ( 0.00%)        0.00 ( 0.00%)        0.00 ( 0.00%)        0.00 ( 0.00%)
  Files/s  max           3.20 ( 0.00%)        3.20 ( 0.00%)        3.20 ( 0.00%)        3.20 ( 0.00%)
  Overhead min      508667.00 ( 0.00%)   521350.00 (-2.49%)   544292.00 (-7.00%)   547168.00 (-7.57%)
  Overhead mean     551185.00 ( 0.00%)   652690.73 (-18.42%)   991208.40 (-79.83%)   570130.53 (-3.44%)
  Overhead stddev    18200.69 ( 0.00%)   331958.29 (-1723.88%)  1579579.43 (-8578.68%)     9576.81 (47.38%)
  Overhead max      576775.00 ( 0.00%)  1846634.00 (-220.17%)  6901055.00 (-1096.49%)   585675.00 (-1.54%)
  MMTests Statistics: duration
  Sys Time Running Test (seconds)             309.90    300.95    307.33    298.95
  User+Sys Time Running Test (seconds)        319.32    309.67    315.69    307.51
  Total Elapsed Time (seconds)               1187.85   1193.09   1191.98   1193.73

  MMTests Statistics: vmstat
  Page Ins                                       80532       82212       81420       79480
  Page Outs                                  111434984   111456240   111437376   111582628
  Swap Ins                                           0           0           0           0
  Swap Outs                                          0           0           0           0
  Direct pages scanned                           44881       27889       27453       34843
  Kswapd pages scanned                        25841428    25860774    25861233    25843212
  Kswapd pages reclaimed                      25841393    25860741    25861199    25843179
  Direct pages reclaimed                         44881       27889       27453       34843
  Kswapd efficiency                                99%         99%         99%         99%
  Kswapd velocity                            21754.791   21675.460   21696.029   21649.127
  Direct efficiency                               100%        100%        100%        100%
  Direct velocity                               37.783      23.375      23.031      29.188
  Percentage direct scans                           0%          0%          0%          0%

ftrace showed that there was no stalling on writeback or pages submitted
for IO from reclaim context.

postmark was similar and while it was more interesting, it also did not
push reclaim heavily.

  POSTMARK
                                       3.3.0-vanilla       rc2-vanilla  lumpyremove-v2r3       nosync-v2r3
  Transactions per second:               16.00 ( 0.00%)    20.00 (25.00%)    18.00 (12.50%)    17.00 ( 6.25%)
  Data megabytes read per second:        18.80 ( 0.00%)    24.27 (29.10%)    22.26 (18.40%)    20.54 ( 9.26%)
  Data megabytes written per second:     35.83 ( 0.00%)    46.25 (29.08%)    42.42 (18.39%)    39.14 ( 9.24%)
  Files created alone per second:        28.00 ( 0.00%)    38.00 (35.71%)    34.00 (21.43%)    30.00 ( 7.14%)
  Files create/transact per second:       8.00 ( 0.00%)    10.00 (25.00%)     9.00 (12.50%)     8.00 ( 0.00%)
  Files deleted alone per second:       556.00 ( 0.00%)  1224.00 (120.14%)  3062.00 (450.72%)  6124.00 (1001.44%)
  Files delete/transact per second:       8.00 ( 0.00%)    10.00 (25.00%)     9.00 (12.50%)     8.00 ( 0.00%)

  MMTests Statistics: duration
  Sys Time Running Test (seconds)             113.34    107.99    109.73    108.72
  User+Sys Time Running Test (seconds)        145.51    139.81    143.32    143.55
  Total Elapsed Time (seconds)               1159.16    899.23    980.17   1062.27

  MMTests Statistics: vmstat
  Page Ins                                    13710192    13729032    13727944    13760136
  Page Outs                                   43071140    42987228    42733684    42931624
  Swap Ins                                           0           0           0           0
  Swap Outs                                          0           0           0           0
  Direct pages scanned                               0           0           0           0
  Kswapd pages scanned                         9941613     9937443     9939085     9929154
  Kswapd pages reclaimed                       9940926     9936751     9938397     9928465
  Direct pages reclaimed                             0           0           0           0
  Kswapd efficiency                                99%         99%         99%         99%
  Kswapd velocity                             8576.567   11051.058   10140.164    9347.109
  Direct efficiency                               100%        100%        100%        100%
  Direct velocity                                0.000       0.000       0.000       0.000

It looks like here that the full series regresses performance but as
ftrace showed no usage of wait_iff_congested() or sync reclaim I am
assuming it's a disruption due to monitoring.  Other data such as memory
usage, page IO, swap IO all looked similar.

Running a benchmark with a plain DD showed nothing very interesting.
The full series stalled in wait_iff_congested() slightly less but stall
times on vanilla kernels were marginal.

Running a benchmark that hammered on file-backed mappings showed stalls
due to congestion but not in sync writebacks

  MICRO
                                       3.3.0-vanilla       rc2-vanilla  lumpyremove-v2r3       nosync-v2r3
  MMTests Statistics: duration
  Sys Time Running Test (seconds)             308.13    294.50    298.75    299.53
  User+Sys Time Running Test (seconds)        330.45    316.28    318.93    320.79
  Total Elapsed Time (seconds)               1814.90   1833.88   1821.14   1832.91

  MMTests Statistics: vmstat
  Page Ins                                      108712      120708       97224      110344
  Page Outs                                  155514576   156017404   155813676   156193256
  Swap Ins                                           0           0           0           0
  Swap Outs                                          0           0           0           0
  Direct pages scanned                         2599253     1550480     2512822     2414760
  Kswapd pages scanned                        69742364    71150694    68839041    69692533
  Kswapd pages reclaimed                      34824488    34773341    34796602    34799396
  Direct pages reclaimed                         53693       94750       61792       75205
  Kswapd efficiency                                49%         48%         50%         49%
  Kswapd velocity                            38427.662   38797.901   37799.972   38022.889
  Direct efficiency                                 2%          6%          2%          3%
  Direct velocity                             1432.174     845.464    1379.807    1317.446
  Percentage direct scans                           3%          2%          3%          3%
  Page writes by reclaim                             0           0           0           0
  Page writes file                                   0           0           0           0
  Page writes anon                                   0           0           0           0
  Page reclaim immediate                             0           0           0        1218
  Page rescued immediate                             0           0           0           0
  Slabs scanned                                  15360       16384       13312       16384
  Direct inode steals                                0           0           0           0
  Kswapd inode steals                             4340        4327        1630        4323

  FTrace Reclaim Statistics: congestion_wait
  Direct number congest     waited                 0          0          0          0
  Direct time   congest     waited               0ms        0ms        0ms        0ms
  Direct full   congest     waited                 0          0          0          0
  Direct number conditional waited               900        870        754        789
  Direct time   conditional waited               0ms        0ms        0ms       20ms
  Direct full   conditional waited                 0          0          0          0
  KSwapd number congest     waited              2106       2308       2116       1915
  KSwapd time   congest     waited          139924ms   157832ms   125652ms   132516ms
  KSwapd full   congest     waited              1346       1530       1202       1278
  KSwapd number conditional waited             12922      16320      10943      14670
  KSwapd time   conditional waited               0ms        0ms        0ms        0ms
  KSwapd full   conditional waited                 0          0          0          0

Reclaim statistics are not radically changed.  The stall times in kswapd
are massive but it is clear that it is due to calls to congestion_wait()
and that is almost certainly the call in balance_pgdat().  Otherwise
stalls due to dirty pages are non-existant.

I ran a benchmark that stressed high-order allocation.  This is very
artifical load but was used in the past to evaluate lumpy reclaim and
compaction.  Generally I look at allocation success rates and latency
figures.

  STRESS-HIGHALLOC
                   3.3.0-vanilla       rc2-vanilla  lumpyremove-v2r3       nosync-v2r3
  Pass 1          81.00 ( 0.00%)    28.00 (-53.00%)    24.00 (-57.00%)    28.00 (-53.00%)
  Pass 2          82.00 ( 0.00%)    39.00 (-43.00%)    38.00 (-44.00%)    43.00 (-39.00%)
  while Rested    88.00 ( 0.00%)    87.00 (-1.00%)    88.00 ( 0.00%)    88.00 ( 0.00%)

  MMTests Statistics: duration
  Sys Time Running Test (seconds)             740.93    681.42    685.14    684.87
  User+Sys Time Running Test (seconds)       2922.65   3269.52   3281.35   3279.44
  Total Elapsed Time (seconds)               1161.73   1152.49   1159.55   1161.44

  MMTests Statistics: vmstat
  Page Ins                                     4486020     2807256     2855944     2876244
  Page Outs                                    7261600     7973688     7975320     7986120
  Swap Ins                                       31694           0           0           0
  Swap Outs                                      98179           0           0           0
  Direct pages scanned                           53494       57731       34406      113015
  Kswapd pages scanned                         6271173     1287481     1278174     1219095
  Kswapd pages reclaimed                       2029240     1281025     1260708     1201583
  Direct pages reclaimed                          1468       14564       16649       92456
  Kswapd efficiency                                32%         99%         98%         98%
  Kswapd velocity                             5398.133    1117.130    1102.302    1049.641
  Direct efficiency                                 2%         25%         48%         81%
  Direct velocity                               46.047      50.092      29.672      97.306
  Percentage direct scans                           0%          4%          2%          8%
  Page writes by reclaim                       1616049           0           0           0
  Page writes file                             1517870           0           0           0
  Page writes anon                               98179           0           0           0
  Page reclaim immediate                        103778       27339        9796       17831
  Page rescued immediate                             0           0           0           0
  Slabs scanned                                1096704      986112      980992      998400
  Direct inode steals                              223      215040      216736      247881
  Kswapd inode steals                           175331       61548       68444       63066
  Kswapd skipped wait                            21991           0           1           0
  THP fault alloc                                    1         135         125         134
  THP collapse alloc                               393         311         228         236
  THP splits                                        25          13           7           8
  THP fault fallback                                 0           0           0           0
  THP collapse fail                                  3           5           7           7
  Compaction stalls                                865        1270        1422        1518
  Compaction success                               370         401         353         383
  Compaction failures                              495         869        1069        1135
  Compaction pages moved                        870155     3828868     4036106     4423626
  Compaction move failure                        26429       23865       29742       27514

Success rates are completely hosed for 3.4-rc2 which is almost certainly
due to commit fe2c2a10 ("vmscan: reclaim at order 0 when compaction
is enabled").  I expected this would happen for kswapd and impair
allocation success rates (https://lkml.org/lkml/2012/1/25/166) but I did
not anticipate this much a difference: 80% less scanning, 37% less
reclaim by kswapd

In comparison, reclaim/compaction is not aggressive and gives up easily
which is the intended behaviour.  hugetlbfs uses __GFP_REPEAT and would
be much more aggressive about reclaim/compaction than THP allocations
are.  The stress test above is allocating like neither THP or hugetlbfs
but is much closer to THP.

Mainline is now impaired in terms of high order allocation under heavy
load although I do not know to what degree as I did not test with
__GFP_REPEAT.  Keep this in mind for bugs related to hugepage pool
resizing, THP allocation and high order atomic allocation failures from
network devices.

In terms of congestion throttling, I see the following for this test

  FTrace Reclaim Statistics: congestion_wait
  Direct number congest     waited                 3          0          0          0
  Direct time   congest     waited               0ms        0ms        0ms        0ms
  Direct full   congest     waited                 0          0          0          0
  Direct number conditional waited               957        512       1081       1075
  Direct time   conditional waited               0ms        0ms        0ms        0ms
  Direct full   conditional waited                 0          0          0          0
  KSwapd number congest     waited                36          4          3          5
  KSwapd time   congest     waited            3148ms      400ms      300ms      500ms
  KSwapd full   congest     waited                30          4          3          5
  KSwapd number conditional waited             88514        197        332        542
  KSwapd time   conditional waited            4980ms        0ms        0ms        0ms
  KSwapd full   conditional waited                49          0          0          0

The "conditional waited" times are the most interesting as this is
directly impacted by the number of dirty pages encountered during scan.
As lumpy reclaim is no longer scanning contiguous ranges, it is finding
fewer dirty pages.  This brings wait times from about 5 seconds to 0.
kswapd itself is still calling congestion_wait() so it'll still stall but
it's a lot less.

In terms of the type of IO we were doing, I see this

  FTrace Reclaim Statistics: mm_vmscan_writepage
  Direct writes anon  sync                         0          0          0          0
  Direct writes anon  async                        0          0          0          0
  Direct writes file  sync                         0          0          0          0
  Direct writes file  async                        0          0          0          0
  Direct writes mixed sync                         0          0          0          0
  Direct writes mixed async                        0          0          0          0
  KSwapd writes anon  sync                         0          0          0          0
  KSwapd writes anon  async                    91682          0          0          0
  KSwapd writes file  sync                         0          0          0          0
  KSwapd writes file  async                   822629          0          0          0
  KSwapd writes mixed sync                         0          0          0          0
  KSwapd writes mixed async                        0          0          0          0

In 3.2, kswapd was doing a bunch of async writes of pages but
reclaim/compaction was never reaching a point where it was doing sync
IO.  This does not guarantee that reclaim/compaction was not calling
wait_on_page_writeback() but I would consider it unlikely.  It indicates
that merging patches 2 and 3 to stop reclaim/compaction calling
wait_on_page_writeback() should be safe.

This patch:

Lumpy reclaim had a purpose but in the mind of some, it was to kick the
system so hard it trashed.  For others the purpose was to complicate
vmscan.c.  Over time it was giving softer shoes and a nicer attitude but
memory compaction needs to step up and replace it so this patch sends
lumpy reclaim to the farm.

The tracepoint format changes for isolating LRU pages with this patch
applied.  Furthermore reclaim/compaction can no longer queue dirty pages
in pageout() if the underlying BDI is congested.  Lumpy reclaim used
this logic and reclaim/compaction was using it in error.
Signed-off-by: NMel Gorman <mgorman@suse.de>
Acked-by: NRik van Riel <riel@redhat.com>
Acked-by: NKOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: Konstantin Khlebnikov <khlebnikov@openvz.org>
Cc: Hugh Dickins <hughd@google.com>
Cc: Ying Han <yinghan@google.com>
Cc: Andy Whitcroft <apw@shadowen.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The swap token code no longer fits in with the current VM model.  It
does not play well with cgroups or the better NUMA placement code in
development, since we have only one swap token globally.

It also has the potential to mess with scalability of the system, by
increasing the number of non-reclaimable pages on the active and
inactive anon LRU lists.

Last but not least, the swap token code has been broken for a year
without complaints, as reported by Konstantin Khlebnikov.  This suggests
we no longer have much use for it.

The days of sub-1G memory systems with heavy use of swap are over.  If
we ever need thrashing reducing code in the future, we will have to
implement something that does scale.
Signed-off-by: NRik van Riel <riel@redhat.com>
Cc: Konstantin Khlebnikov <khlebnikov@openvz.org>
Acked-by: NJohannes Weiner <hannes@cmpxchg.org>
Cc: Mel Gorman <mel@csn.ul.ie>
Cc: Hugh Dickins <hughd@google.com>
Acked-by: NBob Picco <bpicco@meloft.net>
Acked-by: NKOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Commit f56f821f ("mm: extend prefault helpers to fault in more than
PAGE_SIZE") added in the new functions: fault_in_multipages_writeable()
and fault_in_multipages_readable().

However, we currently see:

  include/linux/pagemap.h:492: warning: 'ret' may be used uninitialized in this function
  include/linux/pagemap.h:492: note: 'ret' was declared here

Unlike a lot of gcc nags, this one appears somewhat legit.  i.e.  passing
in an invalid negative value of "size" does make it look like all the
conditionals in there would be bypassed and the uninitialized value would
be returned.
Signed-off-by: NPaul Gortmaker <paul.gortmaker@windriver.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

This changes the interfaces in <asm/word-at-a-time.h> to be a bit more
complicated, but a lot more generic.

In particular, it allows us to really do the operations efficiently on
both little-endian and big-endian machines, pretty much regardless of
machine details.  For example, if you can rely on a fast population
count instruction on your architecture, this will allow you to make your
optimized <asm/word-at-a-time.h> file with that.

NOTE! The "generic" version in include/asm-generic/word-at-a-time.h is
not truly generic, it actually only works on big-endian.  Why? Because
on little-endian the generic algorithms are wasteful, since you can
inevitably do better. The x86 implementation is an example of that.

(The only truly non-generic part of the asm-generic implementation is
the "find_zero()" function, and you could make a little-endian version
of it.  And if the Kbuild infrastructure allowed us to pick a particular
header file, that would be lovely)

The <asm/word-at-a-time.h> functions are as follows:

 - WORD_AT_A_TIME_CONSTANTS: specific constants that the algorithm
   uses.

 - has_zero(): take a word, and determine if it has a zero byte in it.
   It gets the word, the pointer to the constant pool, and a pointer to
   an intermediate "data" field it can set.

   This is the "quick-and-dirty" zero tester: it's what is run inside
   the hot loops.

 - "prep_zero_mask()": take the word, the data that has_zero() produced,
   and the constant pool, and generate an *exact* mask of which byte had
   the first zero.  This is run directly *outside* the loop, and allows
   the "has_zero()" function to answer the "is there a zero byte"
   question without necessarily getting exactly *which* byte is the
   first one to contain a zero.

   If you do multiple byte lookups concurrently (eg "hash_name()", which
   looks for both NUL and '/' bytes), after you've done the prep_zero_mask()
   phase, the result of those can be or'ed together to get the "either
   or" case.

 - The result from "prep_zero_mask()" can then be fed into "find_zero()"
   (to find the byte offset of the first byte that was zero) or into
   "zero_bytemask()" (to find the bytemask of the bytes preceding the
   zero byte).

   The existence of zero_bytemask() is optional, and is not necessary
   for the normal string routines.  But dentry name hashing needs it, so
   if you enable DENTRY_WORD_AT_A_TIME you need to expose it.

This changes the generic strncpy_from_user() function and the dentry
hashing functions to use these modified word-at-a-time interfaces.  This
gets us back to the optimized state of the x86 strncpy that we lost in
the previous commit when moving over to the generic version.
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

If the EXCHGID4_FLAG_CONFIRMED_R flag is set, the client is in theory
supposed to already know the correct value of the seqid, in which case
RFC5661 states that it should ignore the value returned.

Also ensure that if the sanity check in nfs4_check_cl_exchange_flags
fails, then we must not change the nfs_client fields.

Finally, clean up the code: we don't need to retest the value of
'status' unless it can change.
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

Ensure that we destroy our lease on last unmount
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

For backward compatibility with nfs-utils.
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
Cc: Weston Andros Adamson <dros@netapp.com>

The tile support for multiple-size huge pages requires tagging
the hugetlb PTE with a "super" bit for PTEs that are multiples of
the basic size of a pagetable span.  To set that bit properly
we need to tweak the PTe in make_huge_pte() based on the vma.

This change provides the API for a subsequent tile-specific
change to use.
Reviewed-by: NHillf Danton <dhillf@gmail.com>
Signed-off-by: NChris Metcalf <cmetcalf@tilera.com>

The change adds some infrastructure for managing tile pmd's more generally,
using pte_pmd() and pmd_pte() methods to translate pmd values to and
from ptes, since on TILEPro a pmd is really just a nested structure
holding a pgd (aka pte).  Several existing pmd methods are moved into
this framework, and a whole raft of additional pmd accessors are defined
that are used by the transparent hugepage framework.

The tile PTE now has a "client2" bit.  The bit is used to indicate a
transparent huge page is in the process of being split into subpages.

This change also fixes a generic bug where the return value of the
generic pmdp_splitting_flush() was incorrect.
Signed-off-by: NChris Metcalf <cmetcalf@tilera.com>

Some minor inline documentation fixes for gaps resulting from new patches.
Signed-off-by: NSumit Semwal <sumit.semwal@ti.com>
Signed-off-by: NSumit Semwal <sumit.semwal@linaro.org>

The main requirement I have for this interface is for scanning out
using the USB gpu devices. Since these devices have to read the
framebuffer on updates and linearly compress it, using kmaps
is a major overhead for every update.

v2: fix warn issues pointed out by Sylwester Nawrocki.

v3: fix compile !CONFIG_DMA_SHARED_BUFFER and add _GPL for now
Signed-off-by: NDave Airlie <airlied@redhat.com>
Reviewed-by: NRob Clark <rob.clark@linaro.org>
Signed-off-by: NSumit Semwal <sumit.semwal@linaro.org>

Compared to Rob Clark's RFC I've ditched the prepare/finish hooks
and corresponding ioctls on the dma_buf file. The major reason for
that is that many people seem to be under the impression that this is
also for synchronization with outstanding asynchronous processsing.
I'm pretty massively opposed to this because:

- It boils down reinventing a new rather general-purpose userspace
  synchronization interface. If we look at things like futexes, this
  is hard to get right.
- Furthermore a lot of kernel code has to interact with this
  synchronization primitive. This smells a look like the dri1 hw_lock,
  a horror show I prefer not to reinvent.
- Even more fun is that multiple different subsystems would interact
  here, so we have plenty of opportunities to create funny deadlock
  scenarios.

I think synchronization is a wholesale different problem from data
sharing and should be tackled as an orthogonal problem.

Now we could demand that prepare/finish may only ensure cache
coherency (as Rob intended), but that runs up into the next problem:
We not only need mmap support to facilitate sw-only processing nodes
in a pipeline (without jumping through hoops by importing the dma_buf
into some sw-access only importer), which allows for a nicer
ION->dma-buf upgrade path for existing Android userspace. We also need
mmap support for existing importing subsystems to support existing
userspace libraries. And a loot of these subsystems are expected to
export coherent userspace mappings.

So prepare/finish can only ever be optional and the exporter /needs/
to support coherent mappings. Given that mmap access is always
somewhat fallback-y in nature I've decided to drop this optimization,
instead of just making it optional. If we demonstrate a clear need for
this, supported by benchmark results, we can always add it in again
later as an optional extension.

Other differences compared to Rob's RFC is the above mentioned support
for mapping a dma-buf through facilities provided by the importer.
Which results in mmap support no longer being optional.

Note that this dma-buf mmap patch does _not_ support every possible
insanity an existing subsystem could pull of with mmap: Because it
does not allow to intercept pagefaults and shoot down ptes importing
subsystems can't add some magic of their own at these points (e.g. to
automatically synchronize with outstanding rendering or set up some
special resources). I've done a cursory read through a few mmap
implementions of various subsytems and I'm hopeful that we can avoid
this (and the complexity it'd bring with it).

Additonally I've extended the documentation a bit to explain the hows
and whys of this mmap extension.

In case we ever want to add support for explicitly cache maneged
userspace mmap with a prepare/finish ioctl pair, we could specify that
userspace needs to mmap a different part of the dma_buf, e.g. the
range starting at dma_buf->size up to dma_buf->size*2. This works
because the size of a dma_buf is invariant over it's lifetime. The
exporter would obviously need to fall back to coherent mappings for
both ranges if a legacy clients maps the coherent range and the
architecture cannot suppor conflicting caching policies. Also, this
would obviously be optional and userspace needs to be able to fall
back to coherent mappings.

v2:
- Spelling fixes from Rob Clark.
- Compile fix for !DMA_BUF from Rob Clark.
- Extend commit message to explain how explicitly cache managed mmap
  support could be added later.
- Extend the documentation with implementations notes for exporters
  that need to manually fake coherency.

v3:
- dma_buf pointer initialization goof-up noticed by Rebecca Schultz
  Zavin.

Cc: Rob Clark <rob.clark@linaro.org>
Cc: Rebecca Schultz Zavin <rebecca@android.com>
Acked-by: NRob Clark <rob.clark@linaro.org>
Signed-Off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: NSumit Semwal <sumit.semwal@linaro.org>

This patch adds the BIND_CONN_TO_SESSION operation which is needed for
upcoming SP4_MACH_CRED work and useful for recovering from broken connections
without destroying the session.
Signed-off-by: NWeston Andros Adamson <dros@netapp.com>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

Keep track of the number of bytes read or written via buffered, direct, and
mem-mapped i/o for use by mdsthreshold size_io hints.
Signed-off-by: NAndy Adamson <andros@netapp.com>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

Signed-off-by: NAndy Adamson <andros@netapp.com>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

We only support one layout type per file system, so one threshold_item4 per
mdsthreshold4.
Signed-off-by: NAndy Adamson <andros@netapp.com>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

And make sure that everything using it explicitly includes
that header file.
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

UDP stack needs a minimum hash size value for proper operation and also
uses alloc_large_system_hash() for proper NUMA distribution of its hash
tables and automatic sizing depending on available system memory.

On some low memory situations, udp_table_init() must ignore the
alloc_large_system_hash() result and reallocs a bigger memory area.

As we cannot easily free old hash table, we leak it and kmemleak can
issue a warning.

This patch adds a low limit parameter to alloc_large_system_hash() to
solve this problem.

We then specify UDP_HTABLE_SIZE_MIN for UDP/UDPLite hash table
allocation.
Reported-by: NMark Asselstine <mark.asselstine@windriver.com>
Reported-by: NTim Bird <tim.bird@am.sony.com>
Signed-off-by: NEric Dumazet <eric.dumazet@gmail.com>
Cc: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Commit 211ed865

    "net: delete all instances of special processing for token ring"

removed the define for IPX_FRAME_TR_8022.

While it is unlikely, we can't be 100% sure that there aren't
random userspace consumers of this value, so restore it.

The only instance I could find was in ncpfs-2.2.6, and it was
safe as-is, since it used #ifdef IPX_FRAME_TR_8022 around the
two use cases it had, but there may be other userspace packages
without similar ifdefs.

Cc: Stephen Hemminger <shemminger@vyatta.com>
Signed-off-by: NPaul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This reverts commit cb04ff9a ("sched, perf: Use a single
callback into the scheduler").

Before this change was introduced, the process switch worked
like this (wrt. to perf event schedule):

     schedule (prev, next)
       - schedule out all perf events for prev
       - switch to next
       - schedule in all perf events for current (next)

After the commit, the process switch looks like:

     schedule (prev, next)
       - schedule out all perf events for prev
       - schedule in all perf events for (next)
       - switch to next

The problem is, that after we schedule perf events in, the pmu
is enabled and we can receive events even before we make the
switch to next - so "current" still being prev process (event
SAMPLE data are filled based on the value of the "current"
process).

Thats exactly what we see for test__PERF_RECORD test. We receive
SAMPLES with PID of the process that our tracee is scheduled
from.

Discussed with Peter Zijlstra:

 > Bah!, yeah I guess reverting is the right thing for now. Sad
 > though.
 >
 > So by having the two hooks we have a black-spot between them
 > where we receive no events at all, this black-spot covers the
 > hand-over of current and we thus don't receive the 'wrong'
 > events.
 >
 > I rather liked we could do away with both that black-spot and
 > clean up the code a little, but apparently people rely on it.
Signed-off-by: NJiri Olsa <jolsa@redhat.com>
Acked-by: NPeter Zijlstra <a.p.zijlstra@chello.nl>
Cc: acme@redhat.com
Cc: paulus@samba.org
Cc: cjashfor@linux.vnet.ibm.com
Cc: fweisbec@gmail.com
Cc: eranian@google.com
Link: http://lkml.kernel.org/r/20120523111302.GC1638@m.brq.redhat.comSigned-off-by: NIngo Molnar <mingo@kernel.org>

Without it we get:

drivers/mfd/max77693.c: In function ‘max77693_i2c_probe’:
drivers/mfd/max77693.c:157:2: error: implicit declaration of function
‘max77693_irq_init’ [-Werror=implicit-function-declaration]
drivers/mfd/max77693.c: In function ‘max77693_resume’:
drivers/mfd/max77693.c:215:2: error: implicit declaration of function
‘max77693_irq_resume’ [-Werror=implicit-function-declaration]
drivers/mfd/max77693-irq.c: In function ‘max77693_irq_lock’:
drivers/mfd/max77693-irq.c:104:2: error: ‘struct max77693_dev’ has no member
named ‘irqlock’
drivers/mfd/max77693-irq.c: In function ‘max77693_irq_sync_unlock’:
drivers/mfd/max77693-irq.c:119:11: error: ‘struct max77693_dev’ has no member
named ‘irq_masks_cache’
drivers/mfd/max77693-irq.c:119:42: error: ‘struct max77693_dev’ has no member
named ‘irq_masks_cur’
drivers/mfd/max77693-irq.c:122:13: error: ‘struct max77693_dev’ has no member
named ‘irq_masks_cur’
drivers/mfd/max77693-irq.c:125:24: error: ‘struct max77693_dev’ has no member
named ‘irqlock’
drivers/mfd/max77693-irq.c: In function ‘max77693_irq_mask’:
drivers/mfd/max77693-irq.c:141:11: error: ‘struct max77693_dev’ has no member
named ‘irq_masks_cur’
drivers/mfd/max77693-irq.c:143:11: error: ‘struct max77693_dev’ has no member
named ‘irq_masks_cur’
drivers/mfd/max77693-irq.c: In function ‘max77693_irq_unmask’:
drivers/mfd/max77693-irq.c:153:11: error: ‘struct max77693_dev’ has no member
named ‘irq_masks_cur’
drivers/mfd/max77693-irq.c:155:11: error: ‘struct max77693_dev’ has no member
named ‘irq_masks_cur’
drivers/mfd/max77693-irq.c: In function ‘max77693_irq_thread’:
drivers/mfd/max77693-irq.c:209:26: error: ‘struct max77693_dev’ has no member
named ‘irq_masks_cur’
drivers/mfd/max77693-irq.c:211:27: error: ‘struct max77693_dev’ has no member
named ‘irq_masks_cur’
drivers/mfd/max77693-irq.c:217:39: error: ‘struct max77693_dev’ has no member
named ‘irq_domain’
drivers/mfd/max77693-irq.c: In function ‘max77693_irq_init’:
drivers/mfd/max77693-irq.c:260:2: error: ‘struct max77693_dev’ has no member
named ‘irqlock’
drivers/mfd/max77693-irq.c:268:12: error: ‘struct max77693_dev’ has no member
named ‘irq_masks_cur’
drivers/mfd/max77693-irq.c:269:12: error: ‘struct max77693_dev’ has no member
named ‘irq_masks_cache’
drivers/mfd/max77693-irq.c:271:12: error: ‘struct max77693_dev’ has no member
named ‘irq_masks_cur’
drivers/mfd/max77693-irq.c:272:12: error: ‘struct max77693_dev’ has no member
named ‘irq_masks_cache’
drivers/mfd/max77693-irq.c:292:10: error: ‘struct max77693_dev’ has no member
named ‘irq_domain’
Signed-off-by: NSamuel Ortiz <sameo@linux.intel.com>

This adds the ability for ttm common code to take an SG table
and use it as the backing for a slave TTM object.

The drivers can then populate their GTT tables using the SG object.

v2: make sure to setup VM for sg bos as well.
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Reviewed-by: NJerome Glisse <jglisse@redhat.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

the ttm drivers need this currently, in order to get fault handling
working and efficient.

It also allows addrs to be NULL for devices like udl.
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

Save the allocated memory to store the parsed device node information
to the global device structure so that sub devices can directly use this
pointer.
In this way, the sub devices does not require to re-allocate the
memory for storing the sub-devices specific device node information.
Signed-off-by: NLaxman Dewangan <ldewangan@nvidia.com>
Signed-off-by: NSamuel Ortiz <sameo@linux.intel.com>