Many sunxi based board needs CONFIG_SUN8I_THERMAL for thermal support.
Signed-off-by: NYangtao Li <tiny.windzz@gmail.com>
Signed-off-by: NMaxime Ripard <maxime@cerno.tech>

This builds the BCM2711 thermal driver as module for the Raspberry Pi 4.
Signed-off-by: NStefan Wahren <stefan.wahren@i2se.com>
Reviewed-by: NFlorian Fainelli <f.fainelli@gmail.com>
Reviewed-by: NNicolas Saenz Julienne <nsaenzjulienne@suse.de>
Tested-by: NNicolas Saenz Julienne <nsaenzjulienne@suse.de>
Signed-off-by: NDaniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/1578941778-23321-5-git-send-email-stefan.wahren@i2se.com

Currently used on the Raspberry Pi 4 and various Broadcom STB SoCs.
Signed-off-by: NNicolas Saenz Julienne <nsaenzjulienne@suse.de>
Signed-off-by: NFlorian Fainelli <f.fainelli@gmail.com>

Since the Actions Semi platform has been enabled in defconfig, let's
also enable the relevant device drivers there.

Link: https://lore.kernel.org/r/20200114084348.25659-3-manivannan.sadhasivam@linaro.orgSigned-off-by: NManivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: NOlof Johansson <olof@lixom.net>

For now mainly used in the Raspberry Pi 4.
Signed-off-by: NNicolas Saenz Julienne <nsaenzjulienne@suse.de>
Signed-off-by: NFlorian Fainelli <f.fainelli@gmail.com>

Select CONFIG_CLK_IMX8MP by default to support i.MX8MP clock driver.
Signed-off-by: NAnson Huang <Anson.Huang@nxp.com>
Reviewed-by: NAbel Vesa <abel.vesa@nxp.com>
Signed-off-by: NShawn Guo <shawnguo@kernel.org>

Enable Nvidia XUSB device mode controller driver and USB GPIO Based
Connection Detection Driver as module.
Signed-off-by: NNagarjuna Kristam <nkristam@nvidia.com>
Signed-off-by: NThierry Reding <treding@nvidia.com>

Enable CONFIG_ARM_QCOM_CPUFREQ_NVMEM.
Signed-off-by: NNiklas Cassel <niklas.cassel@linaro.org>
Reviewed-by: NBjorn Andersson <bjorn.andersson@linaro.org>
Reviewed-by: NUlf Hansson <ulf.hansson@linaro.org>
Link: https://lore.kernel.org/r/20191129213917.1301110-6-niklas.cassel@linaro.orgSigned-off-by: NBjorn Andersson <bjorn.andersson@linaro.org>

Enable CONFIG_QCOM_CPR.
Signed-off-by: NNiklas Cassel <niklas.cassel@linaro.org>
Reviewed-by: NBjorn Andersson <bjorn.andersson@linaro.org>
Reviewed-by: NUlf Hansson <ulf.hansson@linaro.org>
Link: https://lore.kernel.org/r/20191129213917.1301110-5-niklas.cassel@linaro.orgSigned-off-by: NBjorn Andersson <bjorn.andersson@linaro.org>

The high frequency pll is required on compatible Qualcomm SoCs to
support the CPU frequency scaling feature.
Co-developed-by: NNiklas Cassel <niklas.cassel@linaro.org>
Signed-off-by: NNiklas Cassel <niklas.cassel@linaro.org>
Signed-off-by: NJorge Ramirez-Ortiz <jorge.ramirez-ortiz@linaro.org>
Reviewed-by: NBjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20191125142511.681149-6-niklas.cassel@linaro.orgSigned-off-by: NBjorn Andersson <bjorn.andersson@linaro.org>

Both the i.MX8MQ and i.MX8M Mini support the CAAM driver, but it
is currently not enabled by default.

This patch enables this as a module.
Signed-off-by: NAdam Ford <aford173@gmail.com>
Reviewed-by: NHoria Geantă <horia.geanta@nxp.com>
Signed-off-by: NShawn Guo <shawnguo@kernel.org>

The ath10k snoc is found on the Qualcomm QCS404 and SDM845, so enable
the driver for this.
Tested-by: NJeffrey Hugo <jeffrey.l.hugo@gmail.com>
Reviewed-by: NJeffrey Hugo <jeffrey.l.hugo@gmail.com>
Signed-off-by: NBjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20191028171837.3907550-1-bjorn.andersson@linaro.orgSigned-off-by: NBjorn Andersson <bjorn.andersson@linaro.org>

Enable the type C fusb302 driver as module
Signed-off-by: NJerome Brunet <jbrunet@baylibre.com>
Signed-off-by: NKevin Hilman <khilman@baylibre.com>

QCOM_SPMI_ADC5 and SPMI_TEMP_ALARM expose thermistors on the PMIC of
several QCOM platforms through the thermal framework. Enable them.
Signed-off-by: NAmit Kucheria <amit.kucheria@linaro.org>
Link: https://lore.kernel.org/r/5f193f2a7508d82037e8f04e73150feee1a2583e.1575887866.git.amit.kucheria@linaro.orgSigned-off-by: NBjorn Andersson <bjorn.andersson@linaro.org>

Enable PDC interrupt controller for SDM845 devices. The interrupt
controller can detect wakeup capable interrupts when the SoC is in a low
power state.
Signed-off-by: NLina Iyer <ilina@codeaurora.org>
Reviewed-by: NStephen Boyd <swboyd@chromium.org>
Link: https://lore.kernel.org/r/1573855915-9841-13-git-send-email-ilina@codeaurora.orgSigned-off-by: NBjorn Andersson <bjorn.andersson@linaro.org>

Enable the driver for the watchdog found in the application processor
subsystem on most modern Qualcomm platforms.
Tested-by: NVinod Koul <vkoul@kernel.org>
Reviewed-by: NVinod Koul <vkoul@kernel.org>
Signed-off-by: NBjorn Andersson <bjorn.andersson@linaro.org>

Most Qualcomm platforms contain a pseudo random number generator
hardware block. Enable the driver for this block and also enable the
interface for exposing this to userspace.
Tested-by: NVinod Koul <vkoul@kernel.org>
Reviewed-by: NVinod Koul <vkoul@kernel.org>
Signed-off-by: NBjorn Andersson <bjorn.andersson@linaro.org>

This enables display on the Lenovo Yoga C630 by connecting the DSI output
from the SoC to the eDP input of the panel.
Signed-off-by: NJeffrey Hugo <jeffrey.l.hugo@gmail.com>
Signed-off-by: NBjorn Andersson <bjorn.andersson@linaro.org>

This enables Bluetooth on the Lenovo Yoga C630.
Signed-off-by: NJeffrey Hugo <jeffrey.l.hugo@gmail.com>
Signed-off-by: NBjorn Andersson <bjorn.andersson@linaro.org>

The Qualcomm CPUfreq HW provides CPU voltage and frequency scaling on
many modern Qualcomm SoCs. Enable the driver for this hardware block to
enable this functionality on the SDM845 platform.
Tested-by: NVinod Koul <vkoul@kernel.org>
Reviewed-by: NVinod Koul <vkoul@kernel.org>
Signed-off-by: NBjorn Andersson <bjorn.andersson@linaro.org>

The Qualcomm socinfo driver provides SoC information to userspace using
the standard soc interface as well as a number of debugfs entries.

Enable this to allow certain user space tools to acquire this
information, as well as getting developers access to the information in
debugfs that is useful when reporting bugs.
Tested-by: NVinod Koul <vkoul@kernel.org>
Reviewed-by: NVinod Koul <vkoul@kernel.org>
Signed-off-by: NBjorn Andersson <bjorn.andersson@linaro.org>

Enable the drivers for GENI SPI and QSPI controllers found on the
Qualcomm SDM845 platform, among others.
Tested-by: NVinod Koul <vkoul@kernel.org>
Reviewed-by: NVinod Koul <vkoul@kernel.org>
Signed-off-by: NBjorn Andersson <bjorn.andersson@linaro.org>

Enable the the power domains, reset controllers and remote block device
memory access drivers necessary to boot the Audio, Compute and Modem
DSPs on Qualcomm SDM845.

None of the power domains are system critical, but needs to be builtin
as the driver core prohibits probe deferal past late initcall.
Reviewed-by: NVinod Koul <vkoul@kernel.org>
Tested-by: NAlex Elder <elder@linaro.org>
Tested-by: NVinod Koul <vkoul@kernel.org>
Signed-off-by: NBjorn Andersson <bjorn.andersson@linaro.org>

This is mostly to reorder the entries as they've moved in the Kconfig
hierarchies. Doing this periodically (but not very often) simplifies
conflict resolution for new options, etc.

Link: https://lore.kernel.org/r/20191205211438.27552-3-olof@lixom.netSigned-off-by: NOlof Johansson <olof@lixom.net>

The recently introduced Energy Model (EM) framework manages power cost
tables for the CPUs of the system. Its only user right now is the
scheduler, in the context of Energy Aware Scheduling (EAS).

However, the EM framework also offers a generic infrastructure that
could replace subsystem-specific implementations of the same concepts,
as this is the case in the thermal framework.

So, in order to prepare the migration of the thermal subsystem to use
the EM framework, enable it in the default arm64 defconfig, which is the
most commonly used architecture for IPA. This will also compile-in all
of the EAS code, although it won't be enabled by default -- EAS requires
to use the 'schedutil' CPUFreq governor while arm64 defaults to
'performance'.
Acked-by: NDaniel Lezcano <daniel.lezcano@linaro.org>
Acked-by: NViresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: NQuentin Perret <qperret@google.com>
Signed-off-by: NDaniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/20191030151451.7961-2-qperret@google.com

With phy-reset-gpios are enabled for i.MX8MM-EVK board, phy
will be reset. Without CONFIG_AT803X_PHY as y, board will stop
booting in NFS DHCP, because phy is not ready. So mark
CONFIG_AT803X_PHY from m to y to make board boot when using nfs rootfs.
Signed-off-by: NPeng Fan <peng.fan@nxp.com>
Signed-off-by: NShawn Guo <shawnguo@kernel.org>

Enable the Renesas R-Car M3-W+ (R8A77961) SoC in the ARM64 defconfig.
Signed-off-by: NGeert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: NYoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Tested-by: NYoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Link: https://lore.kernel.org/r/20191023123342.13100-11-geert+renesas@glider.be

This patch adds the new allwinner crypto configs to ARM64 defconfig
Signed-off-by: NCorentin Labbe <clabbe.montjoie@gmail.com>
Signed-off-by: NMaxime Ripard <maxime@cerno.tech>

Enable support for the S32V234 SoC, including the previously added UART
driver.
Signed-off-by: NMihaela Martinas <Mihaela.Martinas@freescale.com>
Signed-off-by: NAdrian.Nitu <adrian.nitu@freescale.com>
Signed-off-by: NStoica Cosmin-Stefan <cosmin.stoica@nxp.com>
Signed-off-by: NStefan-Gabriel Mirea <stefan-gabriel.mirea@nxp.com>
Signed-off-by: NShawn Guo <shawnguo@kernel.org>

Select CONFIG_KEYBOARD_IMX_SC_KEY as module by default to
support i.MX8QXP scu key driver.
Signed-off-by: NAnson Huang <Anson.Huang@nxp.com>
Signed-off-by: NShawn Guo <shawnguo@kernel.org>

HiSilicon Kunpeng920 SoC's SMMU has Performance Monitor Counter Groups(PMCG).
This patch enables related driver in defconfig.
Signed-off-by: NZhou Wang <wangzhou1@hisilicon.com>
Signed-off-by: NWei Xu <xuwei5@hisilicon.com>

Enable CONFIG_CRYPTO_DEV_HISI_ZIP for HiSilicon ZIP controller in Kunpeng920
SoC.
Signed-off-by: NZhou Wang <wangzhou1@hisilicon.com>
Signed-off-by: NWei Xu <xuwei5@hisilicon.com>

Enable GPIO_ALTERA driver.
Signed-off-by: NDinh Nguyen <dinguyen@kernel.org>

Enable Intel Stratix10 Remote System Update (RSU) driver

The Intel Remote System Update (RSU) driver provides a way for customers
to update the boot configuration of a Intel Stratix 10 SoC device with
significantly reduced risk of corrupting the bitstream storage and
bricking the system.
Signed-off-by: NRichard Gong <richard.gong@intel.com>
Signed-off-by: NDinh Nguyen <dinguyen@kernel.org>

Since there are enough consumers (drivers) for Actions Semi platform in
mainline, let's enable it in ARM64 defconfig. As of now, this platform
can boot a distro from eMMC/uSD.

Link: https://lore.kernel.org/r/20191015152204.5610-1-manivannan.sadhasivam@linaro.orgSigned-off-by: NManivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: NOlof Johansson <olof@lixom.net>

Enable the Cadence QSPI controller driver that is on the Stratix10 and
Agilex platforms.
Signed-off-by: NDinh Nguyen <dinguyen@kernel.org>

Enable the Renesas RZ/G2N (R8A774B1) SoC in the ARM64 defconfig.
Signed-off-by: NBiju Das <biju.das@bp.renesas.com>
Link: https://lore.kernel.org/r/1568725530-55241-3-git-send-email-biju.das@bp.renesas.comSigned-off-by: NGeert Uytterhoeven <geert+renesas@glider.be>

Commit 6334150e ("remoteproc: don't allow modular build")
changes CONFIG_REMOTEPROC to a boolean from a tristate config
option which inhibits all defconfigs marking CONFIG_REMOTEPROC as
a module in compiling the remoteproc and dependent config options.

So fix the configs to have CONFIG_REMOTEPROC built in.

Link: https://lore.kernel.org/r/20190920075946.13282-5-j-keerthy@ti.com
Fixes: 6334150e ("remoteproc: don't allow modular build")
Signed-off-by: NKeerthy <j-keerthy@ti.com>
Acked-by: NWill Deacon <will@kernel.org>
[olof: Fixed up all 4 occurrances in this one commit]
Signed-off-by: NOlof Johansson <olof@lixom.net>

Tested on the Lenovo Yoga C630 where this patch enables USB.
Without it USB devices are not enumerated.

Link: https://lore.kernel.org/r/20190903192625.14775-3-lee.jones@linaro.orgSigned-off-by: NLee Jones <lee.jones@linaro.org>
Reviewed-by: NBjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: NArnd Bergmann <arnd@arndb.de>

Tested on the Lenovo Yoga C630 where this patch enables the
framebuffer (screen/monitor).  Without it the device appears
not to boot.

Link: https://lore.kernel.org/r/20190903192625.14775-2-lee.jones@linaro.orgSigned-off-by: NLee Jones <lee.jones@linaro.org>
Reviewed-by: NBjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: NArnd Bergmann <arnd@arndb.de>