the value of last_mclk_dpm_enable_mask will be changed if
other clients(vce,dal) trigger set power state between enable
and disable uvd dpm.
Signed-off-by: NRex Zhu <Rex.Zhu@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Flush any outstanding thermal work before tearing down
the dpm driver.
Reviewed-by: NChristian König <christian.koenig@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

uvd dpm will be controlled by uvd.
dpm just disable uvd dpm in case of suspend when play video.
due to the new logic of uvd_begin_use/end_use,
if disable uvd dpm in late init, will have no chance to
enable uvd dpm after resume until play video again.

Change-Id: I70e3d7efe63edad37f26e6c5ea089da1135c0ab5
Signed-off-by: NRex Zhu <Rex.Zhu@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

It's already covered by the default case, but add it for
consistency.
Reviewed-by: NAlexandre Demers <alexandre.f.demers@gmail.com>
Reviewed-by: NEdward O'Callaghan <funfunctor@folklore1984.net>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Signed-off-by: NRex Zhu <Rex.Zhu@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

It's already covered by the default case, but add it for
consistency.
Reviewed-by: NAlexandre Demers <alexandre.f.demers@gmail.com>
Reviewed-by: NEdward O'Callaghan <funfunctor@folklore1984.net>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Signed-off-by: NSlava Grigorev <slava.grigorev@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Found-by: Coccinelle
Signed-off-by: NEdward O'Callaghan <funfunctor@folklore1984.net>
Reviewed-by: NTom St Denis <tom.stdenis@amd.com>
Reviewed-by: NChristian König <christian.koenig@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

fix the build
Signed-off-by: NSlava Grigorev <slava.grigorev@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

gfx8 already uses them.  Remove the direct exports and
use the callbacks fpr gfx7.
Reviewed-by: NChunming Zhou <david1.zhou@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

The maximum OD percentage is 20.
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NEric Huang <JinHuiEric.Huang@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NEric Huang <JinHuiEric.Huang@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NEric Huang <JinHuiEric.Huang@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

The power tables on some variants require different firmware.
This fixes stability issues on some newer CI parts.

bug:
https://bugs.freedesktop.org/show_bug.cgi?id=91880Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NHuang Rui <ray.huang@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

We need to release the firmware on driver tear down.
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Add name that we can print out in kernel messages
to aid in debugging.

v2: drop DAL changes for upstream
Signed-off-by: NTom St Denis <tom.stdenis@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Signed-off-by: NNils Wallménius <nils.wallmenius@gmail.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

a / (1 << b) is equivalent to a >> b for unsigned values
Signed-off-by: NNils Wallménius <nils.wallmenius@gmail.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Signed-off-by: NNils Wallménius <nils.wallmenius@gmail.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

This is the result of running the following commands:
find drivers/gpu/drm/amd/ -name "*.h" -exec sed -i 's/[ \t]\+$//' {} \;
find drivers/gpu/drm/amd/ -name "*.c" -exec sed -i 's/[ \t]\+$//' {} \;
find drivers/gpu/drm/amd/ -name "*.h" -exec sed -i 's/ \+\t/\t/' {} \;
find drivers/gpu/drm/amd/ -name "*.c" -exec sed -i 's/ \+\t/\t/' {} \;

v2: drop changes to DAL and internal headers
Signed-off-by: NChristian König <christian.koenig@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

First patch in series to move to user mode
debug tools we're removing the print_status callbacks.

These functions were unused at the moment anyway.
Signed-off-by: NTom St Denis <tom.stdenis@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Looks like radeon commit:
d3052b8c
was missed.
Reviewed-by: NChristian König <christian.koenig@amd.com>
Reviewed-by: NKen Wang <Qingqing.Wang@amd.com>
Reviewed-by: NRex Zhu <Rex.Zhu@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Looks like this got leftover by accident.
Reviewed-by: NChristian König <christian.koenig@amd.com>
Reviewed-by: NKen Wang <Qingqing.Wang@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

This was leftover from a long time ago and is not longer needed
since the thermal controller setup code was added.  Additional
mucking with the thermal interrupts can cause spurious thermal
events which can lead to unnecessary state changes.
Reviewed-by: NChristian König <christian.koenig@amd.com>
Reviewed-by: NKen Wang <Qingqing.Wang@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

We already query this at driver init, so use that info.  Also
handles virtualization cases.
Reviewed-by: Nmonk liu <monk.liu@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NRex Zhu <Rex.Zhu@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Set reversed bit to enable/disable thermal interrupt.
Signed-off-by: NRex Zhu <Rex.Zhu@amd.com>
Reviewed-by: NJammy Zhou <Jammy.Zhou@amd.com>

They were added relatively early in the driver init process
which meant that in some cases the driver was not finished
initializing before external tools tried to use them which
could result in a crash depending on the timing.
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org

Track the type of vram on the board and provide a query for it.
User mode drivers and tools want this information for determining
bandwidth information and form informational purposes.

v2: fix build when CI support is not enabled
Signed-off-by: NKen Wang <Qingqing.Wang@amd.com>
Reviewed-by: NJammy Zhou <Jammy.Zhou@amd.com>

Loading firmware is a rather complicated process, in the end we add a
dependency between the pm mutex and the mm semaphore which results in
a harmless but annoying error message.
Signed-off-by: NChristian König <christian.koenig@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Reviewed-by: NJammy Zhou <Jammy.Zhou@amd.com>

The structure is renamed and moved to amd_shared.h to make
the component independent.  This makes it easier to add
new components in the future.

v2: fix include path
Reviewed-by: NJammy Zhou <Jammy.Zhou@amd.com>
Signed-off-by: Nyanyang1 <young.yang@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

This patch adds support for CIK parts.  These parts
are also supported by radeon which is the preferred
option, so there is a config option to enable support
for CIK parts in amdgpu for testing.
Acked-by: NChristian König <christian.koenig@amd.com>
Acked-by: NJammy Zhou <Jammy.Zhou@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Will be used for exposing current clocks via INFO ioctl.
Tested-by: NMarek Olšák <marek.olsak@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Keep it around for reference.
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

This adds a possibility to control fan on CI parts
via exported hwmon variables. Note that automatic
ucode fan management pauses if you choose to enable
manual fan control.  Use with caution!

v2: agd5f: fix formatting, squash in:

    minor fix for pwm1_enable exposed value

    Track smc control in addition to fan mode
    This fixes pwm1_enable being constantly set
    to 1 because of enabled smc control

also handle the case where smc fan control is disabled.
Signed-off-by: NOleg Chernovskiy <algonkvel@gmail.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

This seems to work well on CI boards after fixing the
last few bugs noticed by Chernovsky Oleg.

On boards with a high default fan speed this should
reduce fan noise.  Manual fan control is not enabled
yet.
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

The current code always reprogrammed the sclk levels,
but we don't currently handle disp sclk requirements
so just skip it.
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Preferred ordering.
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Use unforce levels rather than enable mask instruction.
This is the preferred method.
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>