For SM8250, we need to write the BDF to SID mapping in PCIe controller
register space for proper working. This is accomplished by extracting
the BDF and SID values from "iommu-map" property in DT and writing those
in the register address calculated from the hash value of BDF. In case
of collisions, the index of the next entry will also be written.

For the sake of it, let's introduce a "config_sid" callback and do it
conditionally for SM8250.

Link: https://lore.kernel.org/r/20201208121402.178011-4-mani@kernel.orgSigned-off-by: NManivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: NLorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Reviewed-by: NBjorn Andersson <bjorn.andersson@linaro.org>

The PCIe IP (rev 1.9.0) on SM8250 SoC is similar to the one used on
SDM845. Hence the support is added reusing the members of ops_2_7_0.
The key difference between ops_2_7_0 and ops_1_9_0 is the config_sid
callback, which will be added in successive commit.

Link: https://lore.kernel.org/r/20201208121402.178011-3-mani@kernel.orgSigned-off-by: NManivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: NLorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Reviewed-by: NRob Herring <robh@kernel.org>
Reviewed-by: NBjorn Andersson <bjorn.andersson@linaro.org>

All RC complex drivers must call dw_pcie_setup_rc(). The ordering of the
call shouldn't be too important other than being after any RC resets.

There's a few calls of dw_pcie_setup_rc() left as drivers implementing
suspend/resume need it.

Link: https://lore.kernel.org/r/20201105211159.1814485-13-robh@kernel.orgTested-by: NMarek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: NRob Herring <robh@kernel.org>
Signed-off-by: NLorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Acked-by: NJingoo Han <jingoohan1@gmail.com>
Cc: Kishon Vijay Abraham I <kishon@ti.com>
Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Cc: Bjorn Helgaas <bhelgaas@google.com>
Cc: Kukjin Kim <kgene@kernel.org>
Cc: Krzysztof Kozlowski <krzk@kernel.org>
Cc: Richard Zhu <hongxing.zhu@nxp.com>
Cc: Lucas Stach <l.stach@pengutronix.de>
Cc: Shawn Guo <shawnguo@kernel.org>
Cc: Sascha Hauer <s.hauer@pengutronix.de>
Cc: Pengutronix Kernel Team <kernel@pengutronix.de>
Cc: Fabio Estevam <festevam@gmail.com>
Cc: NXP Linux Team <linux-imx@nxp.com>
Cc: Murali Karicheri <m-karicheri2@ti.com>
Cc: Minghuan Lian <minghuan.Lian@nxp.com>
Cc: Mingkai Hu <mingkai.hu@nxp.com>
Cc: Roy Zang <roy.zang@nxp.com>
Cc: Yue Wang <yue.wang@Amlogic.com>
Cc: Kevin Hilman <khilman@baylibre.com>
Cc: Neil Armstrong <narmstrong@baylibre.com>
Cc: Jerome Brunet <jbrunet@baylibre.com>
Cc: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Cc: Jesper Nilsson <jesper.nilsson@axis.com>
Cc: Gustavo Pimentel <gustavo.pimentel@synopsys.com>
Cc: Xiaowei Song <songxiaowei@hisilicon.com>
Cc: Binghui Wang <wangbinghui@hisilicon.com>
Cc: Andy Gross <agross@kernel.org>
Cc: Bjorn Andersson <bjorn.andersson@linaro.org>
Cc: Stanimir Varbanov <svarbanov@mm-sol.com>
Cc: Pratyush Anand <pratyush.anand@gmail.com>
Cc: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
Cc: Masahiro Yamada <yamada.masahiro@socionext.com>
Cc: linux-omap@vger.kernel.org
Cc: linux-samsung-soc@vger.kernel.org
Cc: linuxppc-dev@lists.ozlabs.org
Cc: linux-amlogic@lists.infradead.org
Cc: linux-arm-kernel@axis.com
Cc: linux-arm-msm@vger.kernel.org

The host drivers which call dw_pcie_msi_init() are all the ones using
the built-in MSI controller, so let's move it into the common DWC code.

Link: https://lore.kernel.org/r/20201105211159.1814485-12-robh@kernel.orgTested-by: NMarek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: NRob Herring <robh@kernel.org>
Signed-off-by: NLorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Acked-by: NJingoo Han <jingoohan1@gmail.com>
Cc: Kishon Vijay Abraham I <kishon@ti.com>
Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Cc: Bjorn Helgaas <bhelgaas@google.com>
Cc: Kukjin Kim <kgene@kernel.org>
Cc: Krzysztof Kozlowski <krzk@kernel.org>
Cc: Richard Zhu <hongxing.zhu@nxp.com>
Cc: Lucas Stach <l.stach@pengutronix.de>
Cc: Shawn Guo <shawnguo@kernel.org>
Cc: Sascha Hauer <s.hauer@pengutronix.de>
Cc: Pengutronix Kernel Team <kernel@pengutronix.de>
Cc: Fabio Estevam <festevam@gmail.com>
Cc: NXP Linux Team <linux-imx@nxp.com>
Cc: Yue Wang <yue.wang@Amlogic.com>
Cc: Kevin Hilman <khilman@baylibre.com>
Cc: Neil Armstrong <narmstrong@baylibre.com>
Cc: Jerome Brunet <jbrunet@baylibre.com>
Cc: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Cc: Jesper Nilsson <jesper.nilsson@axis.com>
Cc: Gustavo Pimentel <gustavo.pimentel@synopsys.com>
Cc: Xiaowei Song <songxiaowei@hisilicon.com>
Cc: Binghui Wang <wangbinghui@hisilicon.com>
Cc: Stanimir Varbanov <svarbanov@mm-sol.com>
Cc: Andy Gross <agross@kernel.org>
Cc: Bjorn Andersson <bjorn.andersson@linaro.org>
Cc: Pratyush Anand <pratyush.anand@gmail.com>
Cc: Thierry Reding <thierry.reding@gmail.com>
Cc: Jonathan Hunter <jonathanh@nvidia.com>
Cc: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
Cc: Masahiro Yamada <yamada.masahiro@socionext.com>
Cc: linux-omap@vger.kernel.org
Cc: linux-samsung-soc@vger.kernel.org
Cc: linux-amlogic@lists.infradead.org
Cc: linux-arm-kernel@axis.com
Cc: linux-arm-msm@vger.kernel.org
Cc: linux-tegra@vger.kernel.org

All the DWC drivers do link setup and checks at roughly the same time.
Let's use the existing .start_link() hook (currently only used in EP
mode) and move the link handling to the core code.

The behavior for a link down was inconsistent as some drivers would fail
probe in that case while others succeed. Let's standardize this to
succeed as there are usecases where devices (and the link) appear later
even without hotplug. For example, a reconfigured FPGA device.

Link: https://lore.kernel.org/r/20201105211159.1814485-11-robh@kernel.orgTested-by: NMarek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: NRob Herring <robh@kernel.org>
Signed-off-by: NLorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Acked-by: NJingoo Han <jingoohan1@gmail.com>
Cc: Kishon Vijay Abraham I <kishon@ti.com>
Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Cc: Bjorn Helgaas <bhelgaas@google.com>
Cc: Kukjin Kim <kgene@kernel.org>
Cc: Krzysztof Kozlowski <krzk@kernel.org>
Cc: Richard Zhu <hongxing.zhu@nxp.com>
Cc: Lucas Stach <l.stach@pengutronix.de>
Cc: Shawn Guo <shawnguo@kernel.org>
Cc: Sascha Hauer <s.hauer@pengutronix.de>
Cc: Pengutronix Kernel Team <kernel@pengutronix.de>
Cc: Fabio Estevam <festevam@gmail.com>
Cc: NXP Linux Team <linux-imx@nxp.com>
Cc: Murali Karicheri <m-karicheri2@ti.com>
Cc: Yue Wang <yue.wang@Amlogic.com>
Cc: Kevin Hilman <khilman@baylibre.com>
Cc: Neil Armstrong <narmstrong@baylibre.com>
Cc: Jerome Brunet <jbrunet@baylibre.com>
Cc: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Cc: Jesper Nilsson <jesper.nilsson@axis.com>
Cc: Gustavo Pimentel <gustavo.pimentel@synopsys.com>
Cc: Xiaowei Song <songxiaowei@hisilicon.com>
Cc: Binghui Wang <wangbinghui@hisilicon.com>
Cc: Andy Gross <agross@kernel.org>
Cc: Bjorn Andersson <bjorn.andersson@linaro.org>
Cc: Stanimir Varbanov <svarbanov@mm-sol.com>
Cc: Pratyush Anand <pratyush.anand@gmail.com>
Cc: Thierry Reding <thierry.reding@gmail.com>
Cc: Jonathan Hunter <jonathanh@nvidia.com>
Cc: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
Cc: Masahiro Yamada <yamada.masahiro@socionext.com>
Cc: linux-omap@vger.kernel.org
Cc: linux-samsung-soc@vger.kernel.org
Cc: linux-amlogic@lists.infradead.org
Cc: linux-arm-kernel@axis.com
Cc: linux-arm-msm@vger.kernel.org
Cc: linux-tegra@vger.kernel.org

Platforms using the built-in DWC MSI controller all have a dedicated
interrupt with "msi" name or at index 0, so let's move setting up the
interrupt to the common DWC code.

spear13xx and dra7xx are the 2 oddballs with muxed interrupts, so
we need to prevent configuring the MSI interrupt by setting msi_irq
to negative.

Link: https://lore.kernel.org/r/20201105211159.1814485-9-robh@kernel.orgTested-by: NMarek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: NRob Herring <robh@kernel.org>
Signed-off-by: NLorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Acked-by: NJingoo Han <jingoohan1@gmail.com>
Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Cc: Bjorn Helgaas <bhelgaas@google.com>
Cc: Kukjin Kim <kgene@kernel.org>
Cc: Krzysztof Kozlowski <krzk@kernel.org>
Cc: Richard Zhu <hongxing.zhu@nxp.com>
Cc: Lucas Stach <l.stach@pengutronix.de>
Cc: Shawn Guo <shawnguo@kernel.org>
Cc: Sascha Hauer <s.hauer@pengutronix.de>
Cc: Pengutronix Kernel Team <kernel@pengutronix.de>
Cc: Fabio Estevam <festevam@gmail.com>
Cc: NXP Linux Team <linux-imx@nxp.com>
Cc: Yue Wang <yue.wang@Amlogic.com>
Cc: Kevin Hilman <khilman@baylibre.com>
Cc: Neil Armstrong <narmstrong@baylibre.com>
Cc: Jerome Brunet <jbrunet@baylibre.com>
Cc: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Cc: Jesper Nilsson <jesper.nilsson@axis.com>
Cc: Gustavo Pimentel <gustavo.pimentel@synopsys.com>
Cc: Xiaowei Song <songxiaowei@hisilicon.com>
Cc: Binghui Wang <wangbinghui@hisilicon.com>
Cc: Stanimir Varbanov <svarbanov@mm-sol.com>
Cc: Andy Gross <agross@kernel.org>
Cc: Bjorn Andersson <bjorn.andersson@linaro.org>
Cc: Pratyush Anand <pratyush.anand@gmail.com>
Cc: Thierry Reding <thierry.reding@gmail.com>
Cc: Jonathan Hunter <jonathanh@nvidia.com>
Cc: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
Cc: Masahiro Yamada <yamada.masahiro@socionext.com>
Cc: linux-samsung-soc@vger.kernel.org
Cc: linux-amlogic@lists.infradead.org
Cc: linux-arm-kernel@axis.com
Cc: linux-arm-msm@vger.kernel.org
Cc: linux-tegra@vger.kernel.org

Most DWC drivers use the common register resource names "dbi", "dbi2", and
"addr_space", so let's move their setup into the DWC common code.

This means 'dbi_base' in particular is setup later, but it looks like no
drivers touch DBI registers before dw_pcie_host_init or dw_pcie_ep_init.

Link: https://lore.kernel.org/r/20201105211159.1814485-4-robh@kernel.orgTested-by: NMarek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: NRob Herring <robh@kernel.org>
Signed-off-by: NLorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Acked-by: NJingoo Han <jingoohan1@gmail.com>
Cc: Kishon Vijay Abraham I <kishon@ti.com>
Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Cc: Bjorn Helgaas <bhelgaas@google.com>
Cc: Murali Karicheri <m-karicheri2@ti.com>
Cc: Minghuan Lian <minghuan.Lian@nxp.com>
Cc: Mingkai Hu <mingkai.hu@nxp.com>
Cc: Roy Zang <roy.zang@nxp.com>
Cc: Jonathan Chocron <jonnyc@amazon.com>
Cc: Jesper Nilsson <jesper.nilsson@axis.com>
Cc: Gustavo Pimentel <gustavo.pimentel@synopsys.com>
Cc: Xiaowei Song <songxiaowei@hisilicon.com>
Cc: Binghui Wang <wangbinghui@hisilicon.com>
Cc: Andy Gross <agross@kernel.org>
Cc: Bjorn Andersson <bjorn.andersson@linaro.org>
Cc: Stanimir Varbanov <svarbanov@mm-sol.com>
Cc: Pratyush Anand <pratyush.anand@gmail.com>
Cc: Thierry Reding <thierry.reding@gmail.com>
Cc: Jonathan Hunter <jonathanh@nvidia.com>
Cc: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
Cc: Masahiro Yamada <yamada.masahiro@socionext.com>
Cc: linux-omap@vger.kernel.org
Cc: linuxppc-dev@lists.ozlabs.org
Cc: linux-arm-kernel@axis.com
Cc: linux-arm-msm@vger.kernel.org
Cc: linux-tegra@vger.kernel.org

keystone would force gen2 if no DT property. Now it relies on the
PCI_EXP_LNKCAP value.

Link: https://lore.kernel.org/r/20200821035420.380495-35-robh@kernel.orgSigned-off-by: NRob Herring <robh@kernel.org>
Signed-off-by: NLorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Cc: Kishon Vijay Abraham I <kishon@ti.com>
Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Cc: Bjorn Helgaas <bhelgaas@google.com>
Cc: Richard Zhu <hongxing.zhu@nxp.com>
Cc: Lucas Stach <l.stach@pengutronix.de>
Cc: Shawn Guo <shawnguo@kernel.org>
Cc: Sascha Hauer <s.hauer@pengutronix.de>
Cc: Pengutronix Kernel Team <kernel@pengutronix.de>
Cc: Fabio Estevam <festevam@gmail.com>
Cc: NXP Linux Team <linux-imx@nxp.com>
Cc: Murali Karicheri <m-karicheri2@ti.com>
Cc: Jingoo Han <jingoohan1@gmail.com>
Cc: Gustavo Pimentel <gustavo.pimentel@synopsys.com>
Cc: Stanimir Varbanov <svarbanov@mm-sol.com>
Cc: Andy Gross <agross@kernel.org>
Cc: Bjorn Andersson <bjorn.andersson@linaro.org>
Cc: Pratyush Anand <pratyush.anand@gmail.com>
Cc: Thierry Reding <thierry.reding@gmail.com>
Cc: Jonathan Hunter <jonathanh@nvidia.com>
Cc: linux-omap@vger.kernel.org
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-arm-msm@vger.kernel.org
Cc: linux-tegra@vger.kernel.org

The QCom driver has its own defines for common PCI config space
registers. It also hard codes the capability register offsets which are
discoverable. Convert it to use the standard register definitions.

Link: https://lore.kernel.org/r/20200821035420.380495-30-robh@kernel.orgSigned-off-by: NRob Herring <robh@kernel.org>
Signed-off-by: NLorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Cc: Stanimir Varbanov <svarbanov@mm-sol.com>
Cc: Andy Gross <agross@kernel.org>
Cc: Bjorn Andersson <bjorn.andersson@linaro.org>
Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Cc: Bjorn Helgaas <bhelgaas@google.com>
Cc: linux-arm-msm@vger.kernel.org

Move the IS_ENABLED(CONFIG_PCI_MSI) check into dw_pcie_msi_init()
instead of duplicating it in all the drivers.

Link: https://lore.kernel.org/r/20200821035420.380495-22-robh@kernel.orgSigned-off-by: NRob Herring <robh@kernel.org>
Signed-off-by: NLorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Cc: Richard Zhu <hongxing.zhu@nxp.com>
Cc: Lucas Stach <l.stach@pengutronix.de>
Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Cc: Bjorn Helgaas <bhelgaas@google.com>
Cc: Shawn Guo <shawnguo@kernel.org>
Cc: Sascha Hauer <s.hauer@pengutronix.de>
Cc: Pengutronix Kernel Team <kernel@pengutronix.de>
Cc: Fabio Estevam <festevam@gmail.com>
Cc: NXP Linux Team <linux-imx@nxp.com>
Cc: Yue Wang <yue.wang@Amlogic.com>
Cc: Kevin Hilman <khilman@baylibre.com>
Cc: Jesper Nilsson <jesper.nilsson@axis.com>
Cc: Jingoo Han <jingoohan1@gmail.com>
Cc: Gustavo Pimentel <gustavo.pimentel@synopsys.com>
Cc: Xiaowei Song <songxiaowei@hisilicon.com>
Cc: Binghui Wang <wangbinghui@hisilicon.com>
Cc: Stanimir Varbanov <svarbanov@mm-sol.com>
Cc: Andy Gross <agross@kernel.org>
Cc: Bjorn Andersson <bjorn.andersson@linaro.org>
Cc: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
Cc: Masahiro Yamada <yamada.masahiro@socionext.com>
Cc: linux-amlogic@lists.infradead.org
Cc: linux-arm-kernel@axis.com
Cc: linux-arm-msm@vger.kernel.org

Qsdk U-Boot can incorrectly leave the PCIe interface in an undefined
state if bootm command is used instead of bootipq. This is caused by the
not deinit of PCIe when bootm is called. Reset the PCIe before init
anyway to fix this U-Boot bug.

Link: https://lore.kernel.org/r/20200901124955.137-1-ansuelsmth@gmail.com
Fixes: 82a82383 ("PCI: qcom: Add Qualcomm PCIe controller driver")
Signed-off-by: NAnsuel Smith <ansuelsmth@gmail.com>
Signed-off-by: NLorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Reviewed-by: NBjorn Andersson <bjorn.andersson@linaro.org>
Cc: stable@vger.kernel.org # v4.19+

Use devm_platform_ioremap_resource_byname() to simplify the code
since it contains platform_get_resource_byname() and
devm_ioremap_resource() respectively.

Link: https://lore.kernel.org/r/20200708164013.5076-1-zhengdejin5@gmail.comSigned-off-by: NDejin Zheng <zhengdejin5@gmail.com>
Signed-off-by: NLorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Reviewed-by: NGustavo Pimentel <gustavo.pimentel@synopsys.com>
Reviewed-by: NRob Herring <robh@kernel.org>

Lots of define are actually already defined in pci_regs.h, directly use
the standard defines.

Link: https://lore.kernel.org/r/20200615210608.21469-13-ansuelsmth@gmail.comSigned-off-by: NAnsuel Smith <ansuelsmth@gmail.com>
Signed-off-by: NLorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Acked-by: NStanimir Varbanov <svarbanov@mm-sol.com>

Some SoC based on ipq8064/5 needs to be limited to pci GEN1 speed due to
some hardware limitations. Add support for speed setting defined by the
max-link-speed binding. If not defined the max speed is set to GEN2 by
default.

Link: https://lore.kernel.org/r/20200615210608.21469-12-ansuelsmth@gmail.comSigned-off-by: NSham Muthayyan <smuthayy@codeaurora.org>
Signed-off-by: NAnsuel Smith <ansuelsmth@gmail.com>
Signed-off-by: NLorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Reviewed-by: NRob Herring <robh@kernel.org>
Acked-by: NStanimir Varbanov <svarbanov@mm-sol.com>

Ipq8064-v2 have tx term offset set to 0. Introduce this variant to permit
different offset based on the revision.

Link: https://lore.kernel.org/r/20200615210608.21469-10-ansuelsmth@gmail.comSigned-off-by: NAnsuel Smith <ansuelsmth@gmail.com>
Signed-off-by: NLorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Acked-by: NStanimir Varbanov <svarbanov@mm-sol.com>

Add tx term offset support to pcie qcom driver need in some revision of
the ipq806x SoC. Ipq8064 needs tx term offset set to 7.

Link: https://lore.kernel.org/r/20200615210608.21469-9-ansuelsmth@gmail.com
Fixes: 82a82383 ("PCI: qcom: Add Qualcomm PCIe controller driver")
Signed-off-by: NSham Muthayyan <smuthayy@codeaurora.org>
Signed-off-by: NAnsuel Smith <ansuelsmth@gmail.com>
Signed-off-by: NLorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Acked-by: NStanimir Varbanov <svarbanov@mm-sol.com>
Cc: stable@vger.kernel.org # v4.5+

Set some specific value for Tx De-Emphasis, Tx Swing and Rx equalization
needed on some ipq8064 based device (Netgear R7800 for example). Without
this the system locks on kernel load.

Link: https://lore.kernel.org/r/20200615210608.21469-8-ansuelsmth@gmail.com
Fixes: 82a82383 ("PCI: qcom: Add Qualcomm PCIe controller driver")
Signed-off-by: NAnsuel Smith <ansuelsmth@gmail.com>
Signed-off-by: NLorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Reviewed-by: NRob Herring <robh@kernel.org>
Acked-by: NStanimir Varbanov <svarbanov@mm-sol.com>
Cc: stable@vger.kernel.org # v4.5+

Rework 2.1.0 revision to use bulk clk api and fix missing assert on
reset_control_deassert error.

Link: https://lore.kernel.org/r/20200615210608.21469-7-ansuelsmth@gmail.comSigned-off-by: NAnsuel Smith <ansuelsmth@gmail.com>
Signed-off-by: NLorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Reviewed-by: NRob Herring <robh@kernel.org>
Acked-by: NStanimir Varbanov <svarbanov@mm-sol.com>

Add missing ext reset used by ipq8064 SoC in PCIe qcom driver.

Link: https://lore.kernel.org/r/20200615210608.21469-5-ansuelsmth@gmail.com
Fixes: 82a82383 ("PCI: qcom: Add Qualcomm PCIe controller driver")
Signed-off-by: NSham Muthayyan <smuthayy@codeaurora.org>
Signed-off-by: NAnsuel Smith <ansuelsmth@gmail.com>
Signed-off-by: NLorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Reviewed-by: NRob Herring <robh@kernel.org>
Reviewed-by: NPhilipp Zabel <p.zabel@pengutronix.de>
Acked-by: NStanimir Varbanov <svarbanov@mm-sol.com>
Cc: stable@vger.kernel.org # v4.5+

The deinit issues reset_control_assert for PCI twice and does not contain
phy reset.

Link: https://lore.kernel.org/r/20200615210608.21469-4-ansuelsmth@gmail.comSigned-off-by: NAbhishek Sahu <absahu@codeaurora.org>
Signed-off-by: NAnsuel Smith <ansuelsmth@gmail.com>
Signed-off-by: NLorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Reviewed-by: NRob Herring <robh@kernel.org>
Acked-by: NStanimir Varbanov <svarbanov@mm-sol.com>

Aux and Ref clk are missing in PCIe qcom driver. Add support for this
optional clks for ipq8064/apq8064 SoC.

Link: https://lore.kernel.org/r/20200615210608.21469-2-ansuelsmth@gmail.com
Fixes: 82a82383 ("PCI: qcom: Add Qualcomm PCIe controller driver")
Signed-off-by: NSham Muthayyan <smuthayy@codeaurora.org>
Signed-off-by: NAnsuel Smith <ansuelsmth@gmail.com>
Signed-off-by: NLorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Reviewed-by: NRob Herring <robh@kernel.org>
Acked-by: NStanimir Varbanov <svarbanov@mm-sol.com>

pm_runtime_get_sync() increments the runtime PM usage counter even
when it returns an error code, thus a matching decrement is needed on
the error handling path to keep the counter balanced.

Link: https://lore.kernel.org/r/20200707055000.9453-1-dinghao.liu@zju.edu.cnSigned-off-by: NDinghao Liu <dinghao.liu@zju.edu.cn>
Signed-off-by: NLorenzo Pieralisi <lorenzo.pieralisi@arm.com>

There exists non-bridge PCIe devices with PCI_VENDOR_ID_QCOM, so limit
the fixup to only affect the relevant PCIe bridges.

Fixes: 322f0343 ("PCI: qcom: Use default config space read function")
Signed-off-by: NBjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: NLorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Acked-by: NStanimir Varbanov <svarbanov@mm-sol.com>
Cc: stable@vger.kernel.org # v5.2+

The SDM845 has one Gen2 and one Gen3 controller, add support for these.
Signed-off-by: NBjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: NLorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Reviewed-by: NVinod Koul <vkoul@kernel.org>
Reviewed-by: NPhilipp Zabel <p.zabel@pengutronix.de>
Reviewed-by: NAndrew Murray <andrew.murray@arm.com>
Acked-by: NStanimir Varbanov <svarbanov@mm-sol.com>

Currently, there is only a 1 ms sleep after asserting PERST.

Reading the datasheets for different endpoints, some require PERST to be
asserted for 10 ms in order for the endpoint to perform a reset, others
require it to be asserted for 50 ms.

Several SoCs using this driver uses PCIe Mini Card, where we don't know
what endpoint will be plugged in.

The PCI Express Card Electromechanical Specification r2.0, section
2.2, "PERST# Signal" specifies:

"On power up, the deassertion of PERST# is delayed 100 ms (TPVPERL) from
the power rails achieving specified operating limits."

Add a sleep of 100 ms before deasserting PERST, in order to ensure that
we are compliant with the spec.

Fixes: 82a82383 ("PCI: qcom: Add Qualcomm PCIe controller driver")
Signed-off-by: NNiklas Cassel <niklas.cassel@linaro.org>
Signed-off-by: NLorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Acked-by: NStanimir Varbanov <svarbanov@mm-sol.com>
Cc: stable@vger.kernel.org # 4.5+

The QCS404 platform contains a PCIe version 2.4.0 controller and a
Qualcomm PCIe2 PHY. The driver already supports version 2.4.0, for the
IPQ4019, but this support touches clocks and resets related to the PHY
as well and there's no upstream driver for the PHY.

On QCS404 we must initialize the PHY, so a separate PHY driver is
implemented to take care of this and the controller driver is updated to
not require the PHY related resources. This is done by relying on the
fact that operations in both the clock and reset framework are NOPs when
passed NULL, so we can isolate this change to only the
qcom_pcie_get_resources_2_4_0() function.

For QCS404 we also need to enable the AHB (iface) clock, in order to
access the register space of the controller, but as this is not part of
the IPQ4019 DT binding this is only added for new users of the 2.4.0
controller.
Signed-off-by: NBjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: NLorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Reviewed-by: NNiklas Cassel <niklas.cassel@linaro.org>
Reviewed-by: NVinod Koul <vkoul@kernel.org>
Acked-by: NStanimir Varbanov <svarbanov@mm-sol.com>

Before introducing the QCS404 platform, which uses the same PCIe
controller as IPQ4019, migrate this to use the bulk clock API, in order
to make the error paths slighly cleaner.
Signed-off-by: NBjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: NLorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Reviewed-by: NNiklas Cassel <niklas.cassel@linaro.org>
Reviewed-by: NVinod Koul <vkoul@kernel.org>
Acked-by: NStanimir Varbanov <svarbanov@mm-sol.com>

Move the device class fudge to a proper fixup function, and remove
qcom_pcie_rd_own_conf() which has become useless.

dw_pcie_setup_rc() already did the right thing, but it's broken
on older qcom chips, such as 8064.
Signed-off-by: NMarc Gonzalez <marc.w.gonzalez@free.fr>
Signed-off-by: NLorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Signed-off-by: NBjorn Helgaas <bhelgaas@google.com>
Acked-by: NStanimir Varbanov <svarbanov@mm-sol.com>

Acquiring the reset GPIO low means that reset is being deasserted, this
is followed almost immediately with qcom_pcie_host_init() asserting it,
initializing it and then finally deasserting it again, for the link to
come up.

Some PCIe devices requires a minimum time between the initial deassert
and subsequent reset cycles. In a platform that boots with the reset
GPIO asserted this requirement is being violated by this deassert/assert
pulse.

Acquire the reset GPIO high to prevent this situation by matching the
state to the subsequent asserted state.

Fixes: 82a82383 ("PCI: qcom: Add Qualcomm PCIe controller driver")
Signed-off-by: NBjorn Andersson <bjorn.andersson@linaro.org>
[lorenzo.pieralisi@arm.com: updated commit log]
Signed-off-by: NLorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Acked-by: NStanimir Varbanov <svarbanov@mm-sol.com>
Cc: stable@vger.kernel.org

The driver does not cope with the fact that probe can fail in a number
of cases after enabling runtime PM on the device; this results in
warnings about "Unbalanced pm_runtime_enable". Furthermore if probe
fails after invoking qcom_pcie_host_init() the power-domain will be left
referenced.

As it is not possible for the error handling in qcom_pcie_host_init() to
handle errors happening after returning from that function the
pm_runtime_get_sync() is moved to qcom_pcie_probe() as well.

Fixes: 854b69ef ("PCI: qcom: add runtime pm support to pcie_port")
Signed-off-by: NBjorn Andersson <bjorn.andersson@linaro.org>
[lorenzo.pieralisi@arm.com: updated commit log]
Signed-off-by: NLorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Acked-by: NStanimir Varbanov <svarbanov@mm-sol.com>

Function dw_pcie_host_init() already initializes the root_bus_nr field
of 'struct pcie_port', so the -1 assignment prior to calling
dw_pcie_host_init() in platform specific driver is not really needed.
Drop it.
Signed-off-by: NShawn Guo <shawn.guo@linaro.org>
Signed-off-by: NLorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Acked-by: NStanimir Varbanov <svarbanov@mm-sol.com>

Native PCI drivers for root complex devices were originally all in
drivers/pci/host/.  Some of these devices can also be operated in endpoint
mode.  Drivers for endpoint mode didn't seem to fit in the "host"
directory, so we put both the root complex and endpoint drivers in
per-device directories, e.g., drivers/pci/dwc/, drivers/pci/cadence/, etc.

These per-device directories contain trivial Kconfig and Makefiles and
clutter drivers/pci/.  Make a new drivers/pci/controllers/ directory and
collect all the device-specific drivers there.

No functional change intended.

Link: https://lkml.kernel.org/r/1520304202-232891-1-git-send-email-shawn.lin@rock-chips.comSigned-off-by: NShawn Lin <shawn.lin@rock-chips.com>
[bhelgaas: changelog]
Signed-off-by: NBjorn Helgaas <bhelgaas@google.com>

When CONFIG_GPIOLIB is disabled, we run into a build failure:

  drivers/pci/dwc/pcie-qcom.c: In function 'qcom_pcie_probe':
  drivers/pci/dwc/pcie-qcom.c:1223:16: error: implicit declaration of function 'devm_gpiod_get_optional'; did you mean 'devm_regulator_get_optional'? [-Werror=implicit-function-declaration]
    pcie->reset = devm_gpiod_get_optional(dev, "perst", GPIOD_OUT_LOW);

Including gpio/consumer.h directly is the correct fix.
Signed-off-by: NArnd Bergmann <arnd@arndb.de>
Signed-off-by: NBjorn Helgaas <bhelgaas@google.com>
Reviewed-by: NBjorn Andersson <bjorn.andersson@linaro.org>

This patch is required when the pcie controller sits on a bus with
its own power domain and clocks which are controlled via a bus driver
like simple pm bus. As these bus driver have runtime pm enabled, it makes
sense to update the usage counter so that the runtime pm does not suspend
the clks or power domain associated with the bus driver.
Signed-off-by: NSrinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: NBjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: NLorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Reviewed-by: NVinod Koul <vkoul@kernel.org>
Acked-by: NStanimir Varbanov <svarbanov@mm-sol.com>

Fix a typo that accidentally sets "val" to zero when we intended just to
clear BIT(0).

Fixes: 90d52d57 ("PCI: qcom: Add support for IPQ4019 PCIe controller")
Signed-off-by: NDan Carpenter <dan.carpenter@oracle.com>
[lorenzo.pieralisi@arm.com: updated commit log]
Signed-off-by: NLorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Acked-by: NStanimir Varbanov <svarbanov@mm-sol.com>
Acked-by: NJohn Crispin <john@phrozen.org>

This patch converts existing regulators to use regulator bulk apis,
to make it consistent with msm8996 changes also cut down some redundant code.
Signed-off-by: NSrinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: NLorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Acked-by: NStanimir Varbanov <svarbanov@mm-sol.com>

This patch adds supplies that are required for msm8996. vdda
is analog supply that go in to controller, and vddpe_3v3 is
supply to PCIe endpoint.

Without these supplies PCIe endpoints which require power supplies are
not enumerated at all, as there is no one to power it up.
Signed-off-by: NSrinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: NLorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Acked-by: NStanimir Varbanov <svarbanov@mm-sol.com>
Reviewed-by: NRob Herring <robh@kernel.org>

Implement a multiplexed IRQ domain hierarchy API in the pcie-designware
host bridge driver that funnels all MSI IRQs into a single parent
interrupt, moving away from the obsolete struct msi_controller based
API.

Although the old implementation API is still available, pcie-designware
will now use the multiplexed IRQ domains hierarchical API.

Remove all existing dwc based host bridges MSI IRQs handlers, in that the
hierarchical API now handles MSI IRQs through the hierarchical/chained
MSI domain implementation.
Signed-off-by: NGustavo Pimentel <gustavo.pimentel@synopsys.com>
Signed-off-by: NLorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Tested-by: NNiklas Cassel <niklas.cassel@axis.com>
Tested-by: NShawn Guo <shawn.guo@linaro.org>
Acked-by: NJingoo Han <jingoohan1@gmail.com>
Acked-by: NMarc Zyngier <marc.zyngier@arm.com>

Add SPDX GPL-2.0 to all PCI files that specified the GPL version 2 license.

Remove the boilerplate GPL version 2 language, relying on the assertion in
b2441318 ("License cleanup: add SPDX GPL-2.0 license identifier to
files with no license") that the SPDX identifier may be used instead of the
full boilerplate text.
Signed-off-by: NBjorn Helgaas <bhelgaas@google.com>
Reviewed-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

This driver creates various const structures that it stores in the
data field of an of_device_id array.

Adding const to the declaration of the location that receives the
const value from the data field ensures that the compiler will
continue to check that the value is not modified.  Furthermore, the
const-discarding cast on the extraction from the data field is no
longer needed.

Done using Coccinelle.
Signed-off-by: NJulia Lawall <Julia.Lawall@lip6.fr>
Signed-off-by: NLorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Acked-by: NStanimir Varbanov <svarbanov@mm-sol.com>