提交 · 4851f36a3e7e7a27e9e5532eb818a6b670a90d30 · openeuler / Kernel

17 7月, 2021 4 次提交

net: hns3: add support for forwarding packet to queues of specified TC when flow director rule hit · 4851f36a

由 Jian Shen 提交于 7月 16, 2021

mainline inclusion
from mainline-v5.11-rc1
commit 0f993fe2
category: feature
bugzilla: 173966
CVE: NA

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=0f993fe2b89db2342833856cc0597a309f278e55

----------------------------------------------------------------------

For some new device, it supports forwarding packet to queues
of specified TC when flow director rule hit. So extend the
command handle to support it.
Signed-off-by: NJian Shen <shenjian15@huawei.com>
Signed-off-by: NHuazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
Reviewed-by: NYongxin Li <liyongxin1@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

4851f36a

net: hns3: add support for tc mqprio offload · 46961be3

由 Jian Shen 提交于 7月 16, 2021

mainline inclusion
from mainline-v5.11-rc1
commit 5a5c9091
category: feature
bugzilla: 173966
CVE: NA

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=5a5c9091746749d9e16ff807035a940ca0ae4941

----------------------------------------------------------------------

Currently, the HNS3 driver only supports offload for tc number
and prio_tc. This patch adds support for other qopts, including
queues count and offset for each tc.

When enable tc mqprio offload, it's not allowed to change
queue numbers by ethtool. For hardware limitation, the queue
number of each tc should be power of 2.

For the queues is not assigned to each tc by average, so it's
should return vport->alloc_tqps for hclge_get_max_channels().
Signed-off-by: NJian Shen <shenjian15@huawei.com>
Signed-off-by: NHuazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
Reviewed-by: NYongxin Li <liyongxin1@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

46961be3

net: hns3: refine the struct hane3_tc_info · e887fccc

由 Jian Shen 提交于 7月 16, 2021

mainline inclusion
from mainline-v5.11-rc1
commit 35244430
category: feature
bugzilla: 173966
CVE: NA

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=35244430d62422e96b4c9c9b4c00c0ebece91d73

----------------------------------------------------------------------

Currently, there are multiple members related to tc information
in struct hnae3_knic_private_info. Merge them into a new struct
hnae3_tc_info.
Signed-off-by: NJian Shen <shenjian15@huawei.com>
Signed-off-by: NHuazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
Reviewed-by: NYongxin Li <liyongxin1@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

e887fccc

hisilicon/hns3: convert comma to semicolon · 971f05b5

由 Zheng Yongjun 提交于 7月 16, 2021

mainline inclusion
from mainline-v5.11-rc1
commit 474d8fef
category: feature
bugzilla: 173966
CVE: NA

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=474d8feffb31b7f798be0eeab2f5d95557bd79d7

----------------------------------------------------------------------

Replace a comma between expression statements by a semicolon.
Signed-off-by: NZheng Yongjun <zhengyongjun3@huawei.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
Reviewed-by: NYongxin Li <liyongxin1@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

971f05b5

16 7月, 2021 31 次提交

net: use the new dev_page_is_reusable() instead of private versions · aa61e190

由 Alexander Lobakin 提交于 7月 16, 2021

mainline inclusion
from mainline-v5.12-rc1-dontuse
commit a79afa78
category: feature
bugzilla: 173966
CVE: NA

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=a79afa78e625e4dbe0e07c70929d477ba3386e45

----------------------------------------------------------------------

Now we can remove a bunch of identical functions from the drivers and
make them use common dev_page_is_reusable(). All {,un}likely() checks
are omitted since it's already present in this helper.
Also update some comments near the call sites.
Suggested-by: NDavid Rientjes <rientjes@google.com>
Suggested-by: NJakub Kicinski <kuba@kernel.org>
Cc: John Hubbard <jhubbard@nvidia.com>
Signed-off-by: NAlexander Lobakin <alobakin@pm.me>
Reviewed-by: NJesse Brandeburg <jesse.brandeburg@intel.com>
Signed-off-by: NJakub Kicinski <kuba@kernel.org>
Reviewed-by: NYongxin Li <liyongxin1@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

aa61e190

net: hns3: refine the VLAN tag handle for port based VLAN · fd9b7335

由 Guojia Liao 提交于 7月 16, 2021

mainline inclusion
from mainline-v5.11-rc1
commit 592b0179
category: feature
bugzilla: 173966
CVE: NA

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=592b0179cd498641ae45b9ad4276f5038230f7aa

----------------------------------------------------------------------

For DEVICE_VERSION_V2, the hardware only supports max two layer
VLAN tags, including port based tag inserted by hardware, tag in
tx buffer descriptor(get from skb->tci) and tag in packet.

For transmit packet:
If port based VLAN disabled, and vf driver gets a VLAN tag from
skb, the VLAN tag must be filled to the Outer_VLAN_TAG field
(tag near to DMAC) of tx buffer descriptor, otherwise it may
be inserted after the tag in packet.

If port based VLAN enabled, and vf driver gets a VLAN tag from
skb, the VLAN tag must be filled to the VLAN_TAG field (tag
far to DMAC) of tx buffer descriptor, otherwise it may be
conflicted with port based VLAN, and raise a hardware error.

For receive packet:
The hardware will strip the VLAN tags and fill them in the rx
buffer descriptor, no matter port based VLAN enable or not.
Because port based VLAN tag is useless for stack, so vf driver
needs to discard the port based VLAN tag get from rx buffer
descriptor when port based VLAN enabled.

So vf must know about the port based VLAN state.

For DEVICE_VERSION_V3, the hardware provides some new
configuration to improve it.

For transmit packet:
When enable tag shift mode, hardware will handle the VLAN tag
in outer_VLAN_TAG field as VLAN_TAG, so it won't conflict with
port based VLAN. And hardware also make sure the tag before
the tag in packet. So vf driver doesn't need to specify the tag
position according to the port based VLAN state anymore.

For receive packet:
When enable discard mode, hardware will strip and discard the
port based VLAN tag, so vf driver doesn't need to identify it
from rx buffer descriptor.

So modify the port based VLAN configuration, simplify the process
for vf handling the VLAN tag.
Signed-off-by: NGuojia Liao <liaoguojia@huawei.com>
Signed-off-by: NHuazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: NJakub Kicinski <kuba@kernel.org>
Reviewed-by: NYongxin Li <liyongxin1@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

fd9b7335

net: hns3: add priv flags support to switch limit promisc mode · 35e7064d

由 Jian Shen 提交于 7月 16, 2021

mainline inclusion
from mainline-v5.11-rc1
commit 5e7414cd
category: feature
bugzilla: 173966
CVE: NA

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=5e7414cdf1abea7e2fc19a3190aa7b0d0b1e629d

----------------------------------------------------------------------

Currently, the tx unicast promisc is always enabled when promisc
mode on. If tx unicast promisc on, a function will receive all
unicast packet from other functions belong to the same port.
Add a ethtool private flag to control whether enable tx
unicast promisc. Then the function is able to filter the
unknown unicast packets from other function.
Signed-off-by: NJian Shen <shenjian15@huawei.com>
Signed-off-by: NJakub Kicinski <kuba@kernel.org>
Reviewed-by: NYongxin Li <liyongxin1@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

35e7064d

net: hns3: add support for extended promiscuous command · 567d6b5a

由 Guojia Liao 提交于 7月 16, 2021

mainline inclusion
from mainline-v5.11-rc1
commit c43abe1a
category: feature
bugzilla: 173966
CVE: NA

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=c43abe1a5f83d3afe39f9aea99edfd594add705c

----------------------------------------------------------------------

For DEVICE_VERSION_V2, the hardware supports enable tx and rx
promiscuous separately. But tx or rx promiscuous is active for
unicast, multicast and broadcast promiscuous simultaneously.
To support traffics between functions belong to the same port,
we always enable tx promiscuous for broadcast promiscuous, so
tx promiscuous for unicast and multicast promiscuous is also
enabled.

For DEVICE_VERSION_V3, the hardware decouples the above
relationship. Tx unicast promiscuous, rx unicast promiscuous,
tx multicast promiscuous, rx multicast promiscuous, tx broadcast
promiscuous and rx broadcast promiscuous can be enabled separately.

So add support for the new promiscuous command.
Signed-off-by: NGuojia Liao <liaoguojia@huawei.com>
Signed-off-by: NHuazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: NJakub Kicinski <kuba@kernel.org>
Reviewed-by: NYongxin Li <liyongxin1@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

567d6b5a

irqchip/gic-v3-its: Drop the setting of PTZ altogether · 51b026ba

由 Shenming Lu 提交于 7月 14, 2021

virt inclusion
category: feature
bugzilla: https://gitee.com/openeuler/kernel/issues/I3ZSU3
CVE: NA

---------------------------

GICv4.1 gives a way to get the VLPI state, which needs to map the
vPE first, and after the state read, we may remap the vPE back while
the VPT is not empty. So we can't assume that the VPT is empty at
the first map. Besides, the optimization of PTZ is probably limited
since the HW should be fairly efficient to parse the empty VPT. Let's
drop the setting of PTZ altogether.
Signed-off-by: NShenming Lu <lushenming@huawei.com>
Signed-off-by: NMarc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20210322060158.1584-3-lushenming@huawei.comReviewed-by: NKeqian Zhu <zhukeqian1@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

51b026ba

irqchip/gic-v3-its: Add a cache invalidation right after vPE unmapping · b765f2c5

由 Marc Zyngier 提交于 7月 14, 2021

virt inclusion
category: feature
bugzilla: https://gitee.com/openeuler/kernel/issues/I3ZSU3
CVE: NA

---------------------------

In order to be able to manipulate the VPT once a vPE has been
unmapped, perform the required CMO to invalidate the CPU view
of the VPT.
Signed-off-by: NMarc Zyngier <maz@kernel.org>
Signed-off-by: NShenming Lu <lushenming@huawei.com>
Link: https://lore.kernel.org/r/20210322060158.1584-2-lushenming@huawei.comReviewed-by: NKeqian Zhu <zhukeqian1@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

b765f2c5

net: hns3: keep MAC pause mode when multiple TCs are enabled · b999f22d

由 Yonglong Liu 提交于 7月 16, 2021

mainline inclusion
from mainline-v5.11-rc1
commit d78e5b6a
category: feature
bugzilla: 173966
CVE: NA

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=d78e5b6a6764cb6e83668806b63d74566db36399

----------------------------------------------------------------------

Bellow HNAE3_DEVICE_VERSION_V3, MAC pause mode just support one
TC, when enabled multiple TCs, force enable PFC mode.

HNAE3_DEVICE_VERSION_V3 can support MAC pause mode on multiple
TCs, so when enable multiple TCs, just keep MAC pause mode,
and enable PFC mode just according to the user settings.
Signed-off-by: NYonglong Liu <liuyonglong@huawei.com>
Signed-off-by: NHuazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: NJakub Kicinski <kuba@kernel.org>
Reviewed-by: Nli yongxin <liyongxin1@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

b999f22d

net: hns3: add a check for devcie's verion in hns3_tunnel_csum_bug() · b24e7330

由 Huazhong Tan 提交于 7月 16, 2021

mainline inclusion
from mainline-v5.11-rc1
commit ade36cce
category: feature
bugzilla: 173966
CVE: NA

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=ade36ccef1d7d830a17bbe7eba3a6223e81cdc80

----------------------------------------------------------------------

For the device whose version is above V3(include V3), the hardware
can do checksum offload for the non-tunnel udp packet, who has
a dest port as the IANA assigned. So add a check for devcie's verion
in hns3_tunnel_csum_bug().
Signed-off-by: NHuazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: NJakub Kicinski <kuba@kernel.org>
Reviewed-by: Nli yongxin <liyongxin1@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

b24e7330

net: hns3: add more info to hns3_dbg_bd_info() · 43a3d308

由 Huazhong Tan 提交于 7月 16, 2021

mainline inclusion
from mainline-v5.11-rc1
commit b1533ada
category: feature
bugzilla: 173966
CVE: NA

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=b1533ada7480237be6ffac86092495450f3de3a4

----------------------------------------------------------------------

Since TX hardware checksum and RX completion checksum have been
supported now, so add related information in hns3_dbg_bd_info().
Signed-off-by: NHuazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: NJakub Kicinski <kuba@kernel.org>
Reviewed-by: Nli yongxin <liyongxin1@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

43a3d308

net: hns3: add udp tunnel checksum segmentation support · 4fe9f6b2

由 Huazhong Tan 提交于 7月 16, 2021

mainline inclusion
from mainline-v5.11-rc1
commit 3e281621
category: feature
bugzilla: 173966
CVE: NA

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=3e2816219d7ccae4ab4b5ed480566e05aef9cf1a

----------------------------------------------------------------------

For the device who has the capability to handle udp tunnel
checksum segmentation, add support for it.
Signed-off-by: NHuazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: NJakub Kicinski <kuba@kernel.org>
Reviewed-by: Nli yongxin <liyongxin1@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

4fe9f6b2

net: hns3: remove unsupported NETIF_F_GSO_UDP_TUNNEL_CSUM · 79377123

由 Huazhong Tan 提交于 7月 16, 2021

mainline inclusion
from mainline-v5.11-rc1
commit 57e72c12
category: feature
bugzilla: 173966
CVE: NA

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=57e72c121c7fab33d643f97b617a2c2bb83ea533

----------------------------------------------------------------------

Currently, device V1 and V2 do not support segmentation
offload for UDP based tunnel packet who needs outer UDP
checksum offload, so there is a workaround in the driver
to set the checksum of the outer UDP checksum as zero. This
is not what the user wants, so remove this feature for
device V1 and V2, add support for it later(when the device
has the ability to do that).
Signed-off-by: NHuazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: NJakub Kicinski <kuba@kernel.org>
Reviewed-by: Nli yongxin <liyongxin1@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

79377123

net: hns3: add support for TX hardware checksum offload · e4bc95fe

由 Huazhong Tan 提交于 7月 16, 2021

mainline inclusion
from mainline-v5.11-rc1
commit 66d52f3b
category: feature
bugzilla: 173966
CVE: NA

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=66d52f3bf385c8d969e9ca6b281ddf773c9691d7

----------------------------------------------------------------------

For the device that supports TX hardware checksum, the hardware
can calculate the checksum from the start and fill the checksum
to the offset position, which reduces the operations of
calculating the type and header length of L3/L4. So add this
feature for the HNS3 ethernet driver.

The previous simple BD description is unsuitable, rename it as
HW TX CSUM.
Signed-off-by: NHuazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: NJakub Kicinski <kuba@kernel.org>
Reviewed-by: Nli yongxin <liyongxin1@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

e4bc95fe

net: hns3: add support for RX completion checksum · e721446e

由 Huazhong Tan 提交于 7月 16, 2021

mainline inclusion
from mainline-v5.11-rc1
commit 4b2fe769
category: feature
bugzilla: 173966
CVE: NA

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=4b2fe769aad9736624147882e566eeeb8dd4c187

----------------------------------------------------------------------

In some cases (for example ip fragment), hardware will
calculate the checksum of whole packet in RX, and setup
the HNS3_RXD_L2_CSUM_B flag in the descriptor, so add
support to utilize this checksum.
Signed-off-by: NHuazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: NJakub Kicinski <kuba@kernel.org>
Reviewed-by: Nli yongxin <liyongxin1@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

e721446e

vfio/iommu_type1: Add support for manual dirty log clear · f1c9b9fa