Skip to content

K
Kernel

openeuler / Kernel
1 年多 前同步成功

通知 8
Star 0
Fork 0
K
Kernel
切换分支/标签
  1. 01 2月, 2018 1 次提交
    • J
      mm: use sc->priority for slab shrink targets · 9092c71b
      由 Josef Bacik 提交于 
      Previously we were using the ratio of the number of lru pages scanned to
the number of eligible lru pages to determine the number of slab objects
to scan.  The problem with this is that these two things have nothing to
do with each other, so in slab heavy work loads where there is little to
no page cache we can end up with the pages scanned being a very low
number.  This means that we reclaim next to no slab pages and waste a
lot of time reclaiming small amounts of space.

Consider the following scenario, where we have the following values and
the rest of the memory usage is in slab

  Active:            58840 kB
  Inactive:          46860 kB

Every time we do a get_scan_count() we do this

  scan = size >> sc->priority

where sc->priority starts at DEF_PRIORITY, which is 12.  The first loop
through reclaim would result in a scan target of 2 pages to 11715 total
inactive pages, and 3 pages to 14710 total active pages.  This is a
really really small target for a system that is entirely slab pages.
And this is super optimistic, this assumes we even get to scan these
pages.  We don't increment sc->nr_scanned unless we 1) isolate the page,
which assumes it's not in use, and 2) can lock the page.  Under pressure
these numbers could probably go down, I'm sure there's some random pages
from daemons that aren't actually in use, so the targets get even
smaller.

Instead use sc->priority in the same way we use it to determine scan
amounts for the lru's.  This generally equates to pages.  Consider the
following

  slab_pages = (nr_objects * object_size) / PAGE_SIZE

What we would like to do is

  scan = slab_pages >> sc->priority

but we don't know the number of slab pages each shrinker controls, only
the objects.  However say that theoretically we knew how many pages a
shrinker controlled, we'd still have to convert this to objects, which
would look like the following

  scan = shrinker_pages >> sc->priority
  scan_objects = (PAGE_SIZE / object_size) * scan

or written another way

  scan_objects = (shrinker_pages >> sc->priority) *
		 (PAGE_SIZE / object_size)

which can thus be written

  scan_objects = ((shrinker_pages * PAGE_SIZE) / object_size) >>
		 sc->priority

which is just

  scan_objects = nr_objects >> sc->priority

We don't need to know exactly how many pages each shrinker represents,
it's objects are all the information we need.  Making this change allows
us to place an appropriate amount of pressure on the shrinker pools for
their relative size.

Link: http://lkml.kernel.org/r/1510780549-6812-1-git-send-email-josef@toxicpanda.comSigned-off-by: NJosef Bacik <jbacik@fb.com>
Acked-by: NJohannes Weiner <hannes@cmpxchg.org>
Acked-by: NDave Chinner <david@fromorbit.com>
Acked-by: NAndrey Ryabinin <aryabinin@virtuozzo.com>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Christoph Lameter <cl@linux.com>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: David Rientjes <rientjes@google.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      9092c71b
  3. 19 12月, 2017 1 次提交
    • T
      mm,vmscan: Make unregister_shrinker() no-op if register_shrinker() failed. · bb422a73
      由 Tetsuo Handa 提交于 
      Syzbot caught an oops at unregister_shrinker() because combination of
commit 1d3d4437 ("vmscan: per-node deferred work") and fault
injection made register_shrinker() fail and the caller of
register_shrinker() did not check for failure.

----------
[  554.881422] FAULT_INJECTION: forcing a failure.
[  554.881422] name failslab, interval 1, probability 0, space 0, times 0
[  554.881438] CPU: 1 PID: 13231 Comm: syz-executor1 Not tainted 4.14.0-rc8+ #82
[  554.881443] Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
[  554.881445] Call Trace:
[  554.881459]  dump_stack+0x194/0x257
[  554.881474]  ? arch_local_irq_restore+0x53/0x53
[  554.881486]  ? find_held_lock+0x35/0x1d0
[  554.881507]  should_fail+0x8c0/0xa40
[  554.881522]  ? fault_create_debugfs_attr+0x1f0/0x1f0
[  554.881537]  ? check_noncircular+0x20/0x20
[  554.881546]  ? find_next_zero_bit+0x2c/0x40
[  554.881560]  ? ida_get_new_above+0x421/0x9d0
[  554.881577]  ? find_held_lock+0x35/0x1d0
[  554.881594]  ? __lock_is_held+0xb6/0x140
[  554.881628]  ? check_same_owner+0x320/0x320
[  554.881634]  ? lock_downgrade+0x990/0x990
[  554.881649]  ? find_held_lock+0x35/0x1d0
[  554.881672]  should_failslab+0xec/0x120
[  554.881684]  __kmalloc+0x63/0x760
[  554.881692]  ? lock_downgrade+0x990/0x990
[  554.881712]  ? register_shrinker+0x10e/0x2d0
[  554.881721]  ? trace_event_raw_event_module_request+0x320/0x320
[  554.881737]  register_shrinker+0x10e/0x2d0
[  554.881747]  ? prepare_kswapd_sleep+0x1f0/0x1f0
[  554.881755]  ? _down_write_nest_lock+0x120/0x120
[  554.881765]  ? memcpy+0x45/0x50
[  554.881785]  sget_userns+0xbcd/0xe20
(...snipped...)
[  554.898693] kasan: CONFIG_KASAN_INLINE enabled
[  554.898724] kasan: GPF could be caused by NULL-ptr deref or user memory access
[  554.898732] general protection fault: 0000 [#1] SMP KASAN
[  554.898737] Dumping ftrace buffer:
[  554.898741]    (ftrace buffer empty)
[  554.898743] Modules linked in:
[  554.898752] CPU: 1 PID: 13231 Comm: syz-executor1 Not tainted 4.14.0-rc8+ #82
[  554.898755] Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
[  554.898760] task: ffff8801d1dbe5c0 task.stack: ffff8801c9e38000
[  554.898772] RIP: 0010:__list_del_entry_valid+0x7e/0x150
[  554.898775] RSP: 0018:ffff8801c9e3f108 EFLAGS: 00010246
[  554.898780] RAX: dffffc0000000000 RBX: 0000000000000000 RCX: 0000000000000000
[  554.898784] RDX: 0000000000000000 RSI: ffff8801c53c6f98 RDI: ffff8801c53c6fa0
[  554.898788] RBP: ffff8801c9e3f120 R08: 1ffff100393c7d55 R09: 0000000000000004
[  554.898791] R10: ffff8801c9e3ef70 R11: 0000000000000000 R12: 0000000000000000
[  554.898795] R13: dffffc0000000000 R14: 1ffff100393c7e45 R15: ffff8801c53c6f98
[  554.898800] FS:  0000000000000000(0000) GS:ffff8801db300000(0000) knlGS:0000000000000000
[  554.898804] CS:  0010 DS: 002b ES: 002b CR0: 0000000080050033
[  554.898807] CR2: 00000000dbc23000 CR3: 00000001c7269000 CR4: 00000000001406e0
[  554.898813] DR0: 0000000020000000 DR1: 0000000020000000 DR2: 0000000000000000
[  554.898816] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000600
[  554.898818] Call Trace:
[  554.898828]  unregister_shrinker+0x79/0x300
[  554.898837]  ? perf_trace_mm_vmscan_writepage+0x750/0x750
[  554.898844]  ? down_write+0x87/0x120
[  554.898851]  ? deactivate_super+0x139/0x1b0
[  554.898857]  ? down_read+0x150/0x150
[  554.898864]  ? check_same_owner+0x320/0x320
[  554.898875]  deactivate_locked_super+0x64/0xd0
[  554.898883]  deactivate_super+0x141/0x1b0
----------

Since allowing register_shrinker() callers to call unregister_shrinker()
when register_shrinker() failed can simplify error recovery path, this
patch makes unregister_shrinker() no-op when register_shrinker() failed.
Also, reset shrinker->nr_deferred in case unregister_shrinker() was
by error called twice.
Signed-off-by: NTetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Signed-off-by: NAliaksei Karaliou <akaraliou.dev@gmail.com>
Reported-by: Nsyzbot <syzkaller@googlegroups.com>
Cc: Glauber Costa <glauber@scylladb.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
      bb422a73
  5. 16 11月, 2017 2 次提交
  7. 02 11月, 2017 1 次提交
    • G
      License cleanup: add SPDX GPL-2.0 license identifier to files with no license · b2441318
      由 Greg Kroah-Hartman 提交于 
      Many source files in the tree are missing licensing information, which
makes it harder for compliance tools to determine the correct license.

By default all files without license information are under the default
license of the kernel, which is GPL version 2.

Update the files which contain no license information with the 'GPL-2.0'
SPDX license identifier.  The SPDX identifier is a legally binding
shorthand, which can be used instead of the full boiler plate text.

This patch is based on work done by Thomas Gleixner and Kate Stewart and
Philippe Ombredanne.

How this work was done:

Patches were generated and checked against linux-4.14-rc6 for a subset of
the use cases:
 - file had no licensing information it it.
 - file was a */uapi/* one with no licensing information in it,
 - file was a */uapi/* one with existing licensing information,

Further patches will be generated in subsequent months to fix up cases
where non-standard license headers were used, and references to license
had to be inferred by heuristics based on keywords.

The analysis to determine which SPDX License Identifier to be applied to
a file was done in a spreadsheet of side by side results from of the
output of two independent scanners (ScanCode & Windriver) producing SPDX
tag:value files created by Philippe Ombredanne.  Philippe prepared the
base worksheet, and did an initial spot review of a few 1000 files.

The 4.13 kernel was the starting point of the analysis with 60,537 files
assessed.  Kate Stewart did a file by file comparison of the scanner
results in the spreadsheet to determine which SPDX license identifier(s)
to be applied to the file. She confirmed any determination that was not
immediately clear with lawyers working with the Linux Foundation.

Criteria used to select files for SPDX license identifier tagging was:
 - Files considered eligible had to be source code files.
 - Make and config files were included as candidates if they contained >5
   lines of source
 - File already had some variant of a license header in it (even if <5
   lines).

All documentation files were explicitly excluded.

The following heuristics were used to determine which SPDX license
identifiers to apply.

 - when both scanners couldn't find any license traces, file was
   considered to have no license information in it, and the top level
   COPYING file license applied.

   For non */uapi/* files that summary was:

   SPDX license identifier                            # files
   ---------------------------------------------------|-------
   GPL-2.0                                              11139

   and resulted in the first patch in this series.

   If that file was a */uapi/* path one, it was "GPL-2.0 WITH
   Linux-syscall-note" otherwise it was "GPL-2.0".  Results of that was:

   SPDX license identifier                            # files
   ---------------------------------------------------|-------
   GPL-2.0 WITH Linux-syscall-note                        930

   and resulted in the second patch in this series.

 - if a file had some form of licensing information in it, and was one
   of the */uapi/* ones, it was denoted with the Linux-syscall-note if
   any GPL family license was found in the file or had no licensing in
   it (per prior point).  Results summary:

   SPDX license identifier                            # files
   ---------------------------------------------------|------
   GPL-2.0 WITH Linux-syscall-note                       270
   GPL-2.0+ WITH Linux-syscall-note                      169
   ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause)    21
   ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause)    17
   LGPL-2.1+ WITH Linux-syscall-note                      15
   GPL-1.0+ WITH Linux-syscall-note                       14
   ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause)    5
   LGPL-2.0+ WITH Linux-syscall-note                       4
   LGPL-2.1 WITH Linux-syscall-note                        3
   ((GPL-2.0 WITH Linux-syscall-note) OR MIT)              3
   ((GPL-2.0 WITH Linux-syscall-note) AND MIT)             1

   and that resulted in the third patch in this series.

 - when the two scanners agreed on the detected license(s), that became
   the concluded license(s).

 - when there was disagreement between the two scanners (one detected a
   license but the other didn't, or they both detected different
   licenses) a manual inspection of the file occurred.

 - In most cases a manual inspection of the information in the file
   resulted in a clear resolution of the license that should apply (and
   which scanner probably needed to revisit its heuristics).

 - When it was not immediately clear, the license identifier was
   confirmed with lawyers working with the Linux Foundation.

 - If there was any question as to the appropriate license identifier,
   the file was flagged for further research and to be revisited later
   in time.

In total, over 70 hours of logged manual review was done on the
spreadsheet to determine the SPDX license identifiers to apply to the
source files by Kate, Philippe, Thomas and, in some cases, confirmation
by lawyers working with the Linux Foundation.

Kate also obtained a third independent scan of the 4.13 code base from
FOSSology, and compared selected files where the other two scanners
disagreed against that SPDX file, to see if there was new insights.  The
Windriver scanner is based on an older version of FOSSology in part, so
they are related.

Thomas did random spot checks in about 500 files from the spreadsheets
for the uapi headers and agreed with SPDX license identifier in the
files he inspected. For the non-uapi files Thomas did random spot checks
in about 15000 files.

In initial set of patches against 4.14-rc6, 3 files were found to have
copy/paste license identifier errors, and have been fixed to reflect the
correct identifier.

Additionally Philippe spent 10 hours this week doing a detailed manual
inspection and review of the 12,461 patched files from the initial patch
version early this week with:
 - a full scancode scan run, collecting the matched texts, detected
   license ids and scores
 - reviewing anything where there was a license detected (about 500+
   files) to ensure that the applied SPDX license was correct
 - reviewing anything where there was no detection but the patch license
   was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied
   SPDX license was correct

This produced a worksheet with 20 files needing minor correction.  This
worksheet was then exported into 3 different .csv files for the
different types of files to be modified.

These .csv files were then reviewed by Greg.  Thomas wrote a script to
parse the csv files and add the proper SPDX tag to the file, in the
format that the file expected.  This script was further refined by Greg
based on the output to detect more types of files automatically and to
distinguish between header and source .c files (which need different
comment types.)  Finally Greg ran the script using the .csv files to
generate the patches.
Reviewed-by: NKate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: NPhilippe Ombredanne <pombredanne@nexb.com>
Reviewed-by: NThomas Gleixner <tglx@linutronix.de>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      b2441318
  9. 03 10月, 2017 1 次提交
  11. 07 9月, 2017 4 次提交
  13. 10 8月, 2017 1 次提交
    • P
      locking/lockdep: Rework FS_RECLAIM annotation · d92a8cfc
      由 Peter Zijlstra 提交于 
      A while ago someone, and I cannot find the email just now, asked if we
could not implement the RECLAIM_FS inversion stuff with a 'fake' lock
like we use for other things like workqueues etc. I think this should
be possible which allows reducing the 'irq' states and will reduce the
amount of __bfs() lookups we do.

Removing the 1 IRQ state results in 4 less __bfs() walks per
dependency, improving lockdep performance. And by moving this
annotation out of the lockdep code it becomes easier for the mm people
to extend.
Signed-off-by: NPeter Zijlstra (Intel) <peterz@infradead.org>
Cc: Byungchul Park <byungchul.park@lge.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Nikolay Borisov <nborisov@suse.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: akpm@linux-foundation.org
Cc: boqun.feng@gmail.com
Cc: iamjoonsoo.kim@lge.com
Cc: kernel-team@lge.com
Cc: kirill@shutemov.name
Cc: npiggin@gmail.com
Cc: walken@google.com
Signed-off-by: NIngo Molnar <mingo@kernel.org>
      d92a8cfc
  15. 13 7月, 2017 1 次提交
    • M
      mm, tree wide: replace __GFP_REPEAT by __GFP_RETRY_MAYFAIL with more useful semantic · dcda9b04
      由 Michal Hocko 提交于 
      __GFP_REPEAT was designed to allow retry-but-eventually-fail semantic to
the page allocator.  This has been true but only for allocations
requests larger than PAGE_ALLOC_COSTLY_ORDER.  It has been always
ignored for smaller sizes.  This is a bit unfortunate because there is
no way to express the same semantic for those requests and they are
considered too important to fail so they might end up looping in the
page allocator for ever, similarly to GFP_NOFAIL requests.

Now that the whole tree has been cleaned up and accidental or misled
usage of __GFP_REPEAT flag has been removed for !costly requests we can
give the original flag a better name and more importantly a more useful
semantic.  Let's rename it to __GFP_RETRY_MAYFAIL which tells the user
that the allocator would try really hard but there is no promise of a
success.  This will work independent of the order and overrides the
default allocator behavior.  Page allocator users have several levels of
guarantee vs.  cost options (take GFP_KERNEL as an example)

 - GFP_KERNEL & ~__GFP_RECLAIM - optimistic allocation without _any_
   attempt to free memory at all. The most light weight mode which even
   doesn't kick the background reclaim. Should be used carefully because
   it might deplete the memory and the next user might hit the more
   aggressive reclaim

 - GFP_KERNEL & ~__GFP_DIRECT_RECLAIM (or GFP_NOWAIT)- optimistic
   allocation without any attempt to free memory from the current
   context but can wake kswapd to reclaim memory if the zone is below
   the low watermark. Can be used from either atomic contexts or when
   the request is a performance optimization and there is another
   fallback for a slow path.

 - (GFP_KERNEL|__GFP_HIGH) & ~__GFP_DIRECT_RECLAIM (aka GFP_ATOMIC) -
   non sleeping allocation with an expensive fallback so it can access
   some portion of memory reserves. Usually used from interrupt/bh
   context with an expensive slow path fallback.

 - GFP_KERNEL - both background and direct reclaim are allowed and the
   _default_ page allocator behavior is used. That means that !costly
   allocation requests are basically nofail but there is no guarantee of
   that behavior so failures have to be checked properly by callers
   (e.g. OOM killer victim is allowed to fail currently).

 - GFP_KERNEL | __GFP_NORETRY - overrides the default allocator behavior
   and all allocation requests fail early rather than cause disruptive
   reclaim (one round of reclaim in this implementation). The OOM killer
   is not invoked.

 - GFP_KERNEL | __GFP_RETRY_MAYFAIL - overrides the default allocator
   behavior and all allocation requests try really hard. The request
   will fail if the reclaim cannot make any progress. The OOM killer
   won't be triggered.

 - GFP_KERNEL | __GFP_NOFAIL - overrides the default allocator behavior
   and all allocation requests will loop endlessly until they succeed.
   This might be really dangerous especially for larger orders.

Existing users of __GFP_REPEAT are changed to __GFP_RETRY_MAYFAIL
because they already had their semantic.  No new users are added.
__alloc_pages_slowpath is changed to bail out for __GFP_RETRY_MAYFAIL if
there is no progress and we have already passed the OOM point.

This means that all the reclaim opportunities have been exhausted except
the most disruptive one (the OOM killer) and a user defined fallback
behavior is more sensible than keep retrying in the page allocator.

[akpm@linux-foundation.org: fix arch/sparc/kernel/mdesc.c]
[mhocko@suse.com: semantic fix]
  Link: http://lkml.kernel.org/r/20170626123847.GM11534@dhcp22.suse.cz
[mhocko@kernel.org: address other thing spotted by Vlastimil]
  Link: http://lkml.kernel.org/r/20170626124233.GN11534@dhcp22.suse.cz
Link: http://lkml.kernel.org/r/20170623085345.11304-3-mhocko@kernel.orgSigned-off-by: NMichal Hocko <mhocko@suse.com>
Acked-by: NVlastimil Babka <vbabka@suse.cz>
Cc: Alex Belits <alex.belits@cavium.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Darrick J. Wong <darrick.wong@oracle.com>
Cc: David Daney <david.daney@cavium.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Mel Gorman <mgorman@suse.de>
Cc: NeilBrown <neilb@suse.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      dcda9b04
  17. 11 7月, 2017 1 次提交
  19. 07 7月, 2017 7 次提交
  21. 23 5月, 2017 1 次提交
  23. 13 5月, 2017 1 次提交
    • M
      mm: vmscan: scan until it finds eligible pages · 791b48b6
      由 Minchan Kim 提交于 
      Although there are a ton of free swap and anonymous LRU page in elgible
zones, OOM happened.

  balloon invoked oom-killer: gfp_mask=0x17080c0(GFP_KERNEL_ACCOUNT|__GFP_ZERO|__GFP_NOTRACK), nodemask=(null),  order=0, oom_score_adj=0
  CPU: 7 PID: 1138 Comm: balloon Not tainted 4.11.0-rc6-mm1-zram-00289-ge228d67e9677-dirty #17
  Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Ubuntu-1.8.2-1ubuntu1 04/01/2014
  Call Trace:
   oom_kill_process+0x21d/0x3f0
   out_of_memory+0xd8/0x390
   __alloc_pages_slowpath+0xbc1/0xc50
   __alloc_pages_nodemask+0x1a5/0x1c0
   pte_alloc_one+0x20/0x50
   __pte_alloc+0x1e/0x110
   __handle_mm_fault+0x919/0x960
   handle_mm_fault+0x77/0x120
   __do_page_fault+0x27a/0x550
   trace_do_page_fault+0x43/0x150
   do_async_page_fault+0x2c/0x90
   async_page_fault+0x28/0x30
  Mem-Info:
  active_anon:424716 inactive_anon:65314 isolated_anon:0
   active_file:52 inactive_file:46 isolated_file:0
   unevictable:0 dirty:27 writeback:0 unstable:0
   slab_reclaimable:3967 slab_unreclaimable:4125
   mapped:133 shmem:43 pagetables:1674 bounce:0
   free:4637 free_pcp:225 free_cma:0
  Node 0 active_anon:1698864kB inactive_anon:261256kB active_file:208kB inactive_file:184kB unevictable:0kB isolated(anon):0kB isolated(file):0kB mapped:532kB dirty:108kB writeback:0kB shmem:172kB writeback_tmp:0kB unstable:0kB all_unreclaimable? no
  DMA free:7316kB min:32kB low:44kB high:56kB active_anon:8064kB inactive_anon:0kB active_file:0kB inactive_file:0kB unevictable:0kB writepending:0kB present:15992kB managed:15908kB mlocked:0kB slab_reclaimable:464kB slab_unreclaimable:40kB kernel_stack:0kB pagetables:24kB bounce:0kB free_pcp:0kB local_pcp:0kB free_cma:0kB
  lowmem_reserve[]: 0 992 992 1952
  DMA32 free:9088kB min:2048kB low:3064kB high:4080kB active_anon:952176kB inactive_anon:0kB active_file:36kB inactive_file:0kB unevictable:0kB writepending:88kB present:1032192kB managed:1019388kB mlocked:0kB slab_reclaimable:13532kB slab_unreclaimable:16460kB kernel_stack:3552kB pagetables:6672kB bounce:0kB free_pcp:56kB local_pcp:24kB free_cma:0kB
  lowmem_reserve[]: 0 0 0 959
  Movable free:3644kB min:1980kB low:2960kB high:3940kB active_anon:738560kB inactive_anon:261340kB active_file:188kB inactive_file:640kB unevictable:0kB writepending:20kB present:1048444kB managed:1010816kB mlocked:0kB slab_reclaimable:0kB slab_unreclaimable:0kB kernel_stack:0kB pagetables:0kB bounce:0kB free_pcp:832kB local_pcp:60kB free_cma:0kB
  lowmem_reserve[]: 0 0 0 0
  DMA: 1*4kB (E) 0*8kB 18*16kB (E) 10*32kB (E) 10*64kB (E) 9*128kB (ME) 8*256kB (E) 2*512kB (E) 2*1024kB (E) 0*2048kB 0*4096kB = 7524kB
  DMA32: 417*4kB (UMEH) 181*8kB (UMEH) 68*16kB (UMEH) 48*32kB (UMEH) 14*64kB (MH) 3*128kB (M) 1*256kB (H) 1*512kB (M) 2*1024kB (M) 0*2048kB 0*4096kB = 9836kB
  Movable: 1*4kB (M) 1*8kB (M) 1*16kB (M) 1*32kB (M) 0*64kB 1*128kB (M) 2*256kB (M) 4*512kB (M) 1*1024kB (M) 0*2048kB 0*4096kB = 3772kB
  378 total pagecache pages
  17 pages in swap cache
  Swap cache stats: add 17325, delete 17302, find 0/27
  Free swap  = 978940kB
  Total swap = 1048572kB
  524157 pages RAM
  0 pages HighMem/MovableOnly
  12629 pages reserved
  0 pages cma reserved
  0 pages hwpoisoned
  [ pid ]   uid  tgid total_vm      rss nr_ptes nr_pmds swapents oom_score_adj name
  [  433]     0   433     4904        5      14       3       82             0 upstart-udev-br
  [  438]     0   438    12371        5      27       3      191         -1000 systemd-udevd

With investigation, skipping page of isolate_lru_pages makes reclaim
void because it returns zero nr_taken easily so LRU shrinking is
effectively nothing and just increases priority aggressively.  Finally,
OOM happens.

The problem is that get_scan_count determines nr_to_scan with eligible
zones so although priority drops to zero, it couldn't reclaim any pages
if the LRU contains mostly ineligible pages.

get_scan_count:

        size = lruvec_lru_size(lruvec, lru, sc->reclaim_idx);
	size = size >> sc->priority;

Assumes sc->priority is 0 and LRU list is as follows.

	N-N-N-N-H-H-H-H-H-H-H-H-H-H-H-H-H-H-H-H

(Ie, small eligible pages are in the head of LRU but others are
 almost ineligible pages)

In that case, size becomes 4 so VM want to scan 4 pages but 4 pages from
tail of the LRU are not eligible pages.  If get_scan_count counts
skipped pages, it doesn't reclaim any pages remained after scanning 4
pages so it ends up OOM happening.

This patch makes isolate_lru_pages try to scan pages until it encounters
eligible zones's pages.

[akpm@linux-foundation.org: clean up mind-bending `for' statement.  Tweak comment text]
Fixes: 3db65812 ("Revert "mm, vmscan: account for skipped pages as a partial scan"")
Link: http://lkml.kernel.org/r/1494457232-27401-1-git-send-email-minchan@kernel.orgSigned-off-by: NMinchan Kim <minchan@kernel.org>
Acked-by: NMichal Hocko <mhocko@suse.com>
Acked-by: NJohannes Weiner <hannes@cmpxchg.org>
Cc: Mel Gorman <mgorman@techsingularity.net>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      791b48b6
  25. 09 5月, 2017 1 次提交
  27. 04 5月, 2017 17 次提交
    • J
      mm: memcontrol: use node page state naming scheme for memcg · ccda7f43
      由 Johannes Weiner 提交于 
      The memory controllers stat function names are awkwardly long and
arbitrarily different from the zone and node stat functions.

The current interface is named:

  mem_cgroup_read_stat()
  mem_cgroup_update_stat()
  mem_cgroup_inc_stat()
  mem_cgroup_dec_stat()
  mem_cgroup_update_page_stat()
  mem_cgroup_inc_page_stat()
  mem_cgroup_dec_page_stat()

This patch renames it to match the corresponding node stat functions:

  memcg_page_state()		[node_page_state()]
  mod_memcg_state()		[mod_node_state()]
  inc_memcg_state()		[inc_node_state()]
  dec_memcg_state()		[dec_node_state()]
  mod_memcg_page_state()	[mod_node_page_state()]
  inc_memcg_page_state()	[inc_node_page_state()]
  dec_memcg_page_state()	[dec_node_page_state()]

Link: http://lkml.kernel.org/r/20170404220148.28338-4-hannes@cmpxchg.orgSigned-off-by: NJohannes Weiner <hannes@cmpxchg.org>
Acked-by: NVladimir Davydov <vdavydov.dev@gmail.com>
Acked-by: NMichal Hocko <mhocko@suse.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      ccda7f43
    • J
      mm: memcontrol: re-use node VM page state enum · 71cd3113
      由 Johannes Weiner 提交于 
      The current duplication is a high-maintenance mess, and it's painful to
add new items or query memcg state from the rest of the VM.

This increases the size of the stat array marginally, but we should aim
to track all these stats on a per-cgroup level anyway.

Link: http://lkml.kernel.org/r/20170404220148.28338-3-hannes@cmpxchg.orgSigned-off-by: NJohannes Weiner <hannes@cmpxchg.org>
Acked-by: NVladimir Davydov <vdavydov.dev@gmail.com>
Cc: Michal Hocko <mhocko@suse.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      71cd3113
    • J
      mm: memcontrol: clean up memory.events counting function · 31176c78
      由 Johannes Weiner 提交于 
      We only ever count single events, drop the @nr parameter.  Rename the
function accordingly.  Remove low-information kerneldoc.

Link: http://lkml.kernel.org/r/20170404220148.28338-1-hannes@cmpxchg.orgSigned-off-by: NJohannes Weiner <hannes@cmpxchg.org>
Acked-by: NVladimir Davydov <vdavydov.dev@gmail.com>
Acked-by: NMichal Hocko <mhocko@suse.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      31176c78
    • J
      mm: vmscan: fix IO/refault regression in cache workingset transition · 2a2e4885
      由 Johannes Weiner 提交于 
      Since commit 59dc76b0 ("mm: vmscan: reduce size of inactive file
list") we noticed bigger IO spikes during changes in cache access
patterns.

The patch in question shrunk the inactive list size to leave more room
for the current workingset in the presence of streaming IO.  However,
workingset transitions that previously happened on the inactive list are
now pushed out of memory and incur more refaults to complete.

This patch disables active list protection when refaults are being
observed.  This accelerates workingset transitions, and allows more of
the new set to establish itself from memory, without eating into the
ability to protect the established workingset during stable periods.

The workloads that were measurably affected for us were hit pretty bad
by it, with refault/majfault rates doubling and tripling during cache
transitions, and the machines sustaining half-hour periods of 100% IO
utilization, where they'd previously have sub-minute peaks at 60-90%.

Stateful services that handle user data tend to be more conservative
with kernel upgrades.  As a result we hit most page cache issues with
some delay, as was the case here.

The severity seemed to warrant a stable tag.

Fixes: 59dc76b0 ("mm: vmscan: reduce size of inactive file list")
Link: http://lkml.kernel.org/r/20170404220052.27593-1-hannes@cmpxchg.orgSigned-off-by: NJohannes Weiner <hannes@cmpxchg.org>
Cc: Rik van Riel <riel@redhat.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Vladimir Davydov <vdavydov.dev@gmail.com>
Cc: <stable@vger.kernel.org>	[4.7+]
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      2a2e4885
    • M
      mm: make ttu's return boolean · 666e5a40
      由 Minchan Kim 提交于 
      try_to_unmap() returns SWAP_SUCCESS or SWAP_FAIL so it's suitable for
boolean return.  This patch changes it.

Link: http://lkml.kernel.org/r/1489555493-14659-8-git-send-email-minchan@kernel.orgSigned-off-by: NMinchan Kim <minchan@kernel.org>
Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Cc: Anshuman Khandual <khandual@linux.vnet.ibm.com>
Cc: Hillf Danton <hillf.zj@alibaba-inc.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      666e5a40
    • M
      mm: remove SWAP_AGAIN in ttu · 33fc80e2
      由 Minchan Kim 提交于 
      In 2002, [1] introduced SWAP_AGAIN.  At that time, try_to_unmap_one used
spin_trylock(&mm->page_table_lock) so it's really easy to contend and
fail to hold a lock so SWAP_AGAIN to keep LRU status makes sense.

However, now we changed it to mutex-based lock and be able to block
without skip pte so there is few of small window to return SWAP_AGAIN so
remove SWAP_AGAIN and just return SWAP_FAIL.

[1] c48c43e4, minimal rmap

Link: http://lkml.kernel.org/r/1489555493-14659-7-git-send-email-minchan@kernel.orgSigned-off-by: NMinchan Kim <minchan@kernel.org>
Cc: Anshuman Khandual <khandual@linux.vnet.ibm.com>
Cc: Hillf Danton <hillf.zj@alibaba-inc.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      33fc80e2
    • M
      mm: remove SWAP_MLOCK in ttu · ad6b6704
      由 Minchan Kim 提交于 
      ttu doesn't need to return SWAP_MLOCK.  Instead, just return SWAP_FAIL
because it means the page is not-swappable so it should move to another
LRU list(active or unevictable).  putback friends will move it to right
list depending on the page's LRU flag.

Link: http://lkml.kernel.org/r/1489555493-14659-6-git-send-email-minchan@kernel.orgSigned-off-by: NMinchan Kim <minchan@kernel.org>
Cc: Anshuman Khandual <khandual@linux.vnet.ibm.com>
Cc: Hillf Danton <hillf.zj@alibaba-inc.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      ad6b6704
    • M
      mm: remove SWAP_DIRTY in ttu · 18863d3a
      由 Minchan Kim 提交于 
      If we found lazyfree page is dirty, try_to_unmap_one can just
SetPageSwapBakced in there like PG_mlocked page and just return with
SWAP_FAIL which is very natural because the page is not swappable right
now so that vmscan can activate it.  There is no point to introduce new
return value SWAP_DIRTY in try_to_unmap at the moment.

Link: http://lkml.kernel.org/r/1489555493-14659-3-git-send-email-minchan@kernel.orgSigned-off-by: NMinchan Kim <minchan@kernel.org>
Acked-by: NHillf Danton <hillf.zj@alibaba-inc.com>
Acked-by: NKirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Anshuman Khandual <khandual@linux.vnet.ibm.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      18863d3a
    • Y
      mm/vmscan: more restrictive condition for retry in do_try_to_free_pages · d6622f63
      由 Yisheng Xie 提交于 
      By reviewing code, I find that when enter do_try_to_free_pages, the
may_thrash is always clear, and it will retry shrink zones to tap
cgroup's reserves memory by setting may_thrash when the former
shrink_zones reclaim nothing.

However, when memcg is disabled or on legacy hierarchy, or there do not
have any memcg protected by low limit, it should not do this useless
retry at all, for we do not have any cgroup's reserves memory to tap,
and we have already done hard work but made no progress, which as Michal
pointed out in former version, we are trying hard to control the retry
logical of page alloctor, and the current additional round of reclaim is
just lame.

Therefore, to avoid this unneeded retrying and make code more readable,
we remove the may_thrash field in scan_control, instead, introduce
memcg_low_reclaim and memcg_low_skipped, and only retry when
memcg_low_skipped, by setting memcg_low_reclaim.

[xieyisheng1@huawei.com: remove may_thrash field, introduce mem_cgroup_reclaim]
  Link: http://lkml.kernel.org/r/1490191893-5923-1-git-send-email-ysxie@foxmail.com
Link: http://lkml.kernel.org/r/1490191893-5923-1-git-send-email-ysxie@foxmail.comSigned-off-by: NYisheng Xie <xieyisheng1@huawei.com>
Acked-by: NMichal Hocko <mhocko@suse.com>
Suggested-by: NJohannes Weiner <hannes@cmpxchg.org>
Suggested-by: NMichal Hocko <mhocko@kernel.org>
Suggested-by: NShakeel Butt <shakeelb@google.com>
Reviewed-by: NShakeel Butt <shakeelb@google.com>
Acked-by: NJohannes Weiner <hannes@cmpxchg.org>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Rik van Riel <riel@redhat.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      d6622f63
    • M
      mm, vmscan: prevent kswapd sleeping prematurely due to mismatched classzone_idx · e716f2eb
      由 Mel Gorman 提交于 
      kswapd is woken to reclaim a node based on a failed allocation request
from any eligible zone.  Once reclaiming in balance_pgdat(), it will
continue reclaiming until there is an eligible zone available for the
zone it was woken for.  kswapd tracks what zone it was recently woken
for in pgdat->kswapd_classzone_idx.  If it has not been woken recently,
this zone will be 0.

However, the decision on whether to sleep is made on
kswapd_classzone_idx which is 0 without a recent wakeup request and that
classzone does not account for lowmem reserves.  This allows kswapd to
sleep when a low small zone such as ZONE_DMA is balanced for a GFP_DMA
request even if a stream of allocations cannot use that zone.  While
kswapd may be woken again shortly in the near future there are two
consequences -- the pgdat bits that control congestion are cleared
prematurely and direct reclaim is more likely as kswapd slept
prematurely.

This patch flips kswapd_classzone_idx to default to MAX_NR_ZONES (an
invalid index) when there has been no recent wakeups.  If there are no
wakeups, it'll decide whether to sleep based on the highest possible
zone available (MAX_NR_ZONES - 1).  It then becomes critical that the
"pgdat balanced" decisions during reclaim and when deciding to sleep are
the same.  If there is a mismatch, kswapd can stay awake continually
trying to balance tiny zones.

simoop was used to evaluate it again.  Two of the preparation patches
regressed the workload so they are included as the second set of
results.  Otherwise this patch looks artifically excellent

                                         4.11.0-rc1            4.11.0-rc1            4.11.0-rc1
                                            vanilla              clear-v2          keepawake-v2
Amean    p50-Read             21670074.18 (  0.00%) 19786774.76 (  8.69%) 22668332.52 ( -4.61%)
Amean    p95-Read             25456267.64 (  0.00%) 24101956.27 (  5.32%) 26738688.00 ( -5.04%)
Amean    p99-Read             29369064.73 (  0.00%) 27691872.71 (  5.71%) 30991404.52 ( -5.52%)
Amean    p50-Write                1390.30 (  0.00%)     1011.91 ( 27.22%)      924.91 ( 33.47%)
Amean    p95-Write              412901.57 (  0.00%)    34874.98 ( 91.55%)     1362.62 ( 99.67%)
Amean    p99-Write             6668722.09 (  0.00%)   575449.60 ( 91.37%)    16854.04 ( 99.75%)
Amean    p50-Allocation          78714.31 (  0.00%)    84246.26 ( -7.03%)    74729.74 (  5.06%)
Amean    p95-Allocation         175533.51 (  0.00%)   400058.43 (-127.91%)   101609.74 ( 42.11%)
Amean    p99-Allocation         247003.02 (  0.00%) 10905600.00 (-4315.17%)   125765.57 ( 49.08%)

With this patch on top, write and allocation latencies are massively
improved.  The read latencies are slightly impaired but it's worth
noting that this is mostly due to the IO scheduler and not directly
related to reclaim.  The vmstats are a bit of a mix but the relevant
ones are as follows;

                            4.10.0-rc7  4.10.0-rc7  4.10.0-rc7
                          mmots-20170209 clear-v1r25keepawake-v1r25
Swap Ins                             0           0           0
Swap Outs                            0         608           0
Direct pages scanned           6910672     3132699     6357298
Kswapd pages scanned          57036946    82488665    56986286
Kswapd pages reclaimed        55993488    63474329    55939113
Direct pages reclaimed         6905990     2964843     6352115
Kswapd efficiency                  98%         76%         98%
Kswapd velocity              12494.375   17597.507   12488.065
Direct efficiency                  99%         94%         99%
Direct velocity               1513.835     668.306    1393.148
Page writes by reclaim           0.000 4410243.000       0.000
Page writes file                     0     4409635           0
Page writes anon                     0         608           0
Page reclaim immediate         1036792    14175203     1042571

                            4.11.0-rc1  4.11.0-rc1  4.11.0-rc1
                               vanilla  clear-v2  keepawake-v2
Swap Ins                             0          12           0
Swap Outs                            0         838           0
Direct pages scanned           6579706     3237270     6256811
Kswapd pages scanned          61853702    79961486    54837791
Kswapd pages reclaimed        60768764    60755788    53849586
Direct pages reclaimed         6579055     2987453     6256151
Kswapd efficiency                  98%         75%         98%
Page writes by reclaim           0.000 4389496.000       0.000
Page writes file                     0     4388658           0
Page writes anon                     0         838           0
Page reclaim immediate         1073573    14473009      982507

Swap-outs are equivalent to baseline.

Direct reclaim is reduced but not eliminated.  It's worth noting that
there are two periods of direct reclaim for this workload.  The first is
when it switches from preparing the files for the actual test itself.
It's a lot of file IO followed by a lot of allocs that reclaims heavily
for a brief window.  While direct reclaim is lower with clear-v2, it is
due to kswapd scanning aggressively and trying to reclaim the world
which is not the right thing to do.  With the patches applied, there is
still direct reclaim but the phase change from "creating work files" to
starting multiple threads that allocate a lot of anonymous memory faster
than kswapd can reclaim.

Scanning/reclaim efficiency is restored by this patch.

Page writes from reclaim context are back at 0 which is ideal.

Pages immediately reclaimed after IO completes is slightly improved but
it is expected this will vary slightly.

On UMA, there is almost no change so this is not expected to be a
universal win.

[mgorman@suse.de: fix ->kswapd_classzone_idx initialization]
  Link: http://lkml.kernel.org/r/20170406174538.5msrznj6nt6qpbx5@suse.de
Link: http://lkml.kernel.org/r/20170309075657.25121-4-mgorman@techsingularity.netSigned-off-by: NMel Gorman <mgorman@techsingularity.net>
Acked-by: NVlastimil Babka <vbabka@suse.cz>
Acked-by: NMichal Hocko <mhocko@suse.com>
Cc: Hillf Danton <hillf.zj@alibaba-inc.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Shantanu Goel <sgoel01@yahoo.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      e716f2eb
    • M
      mm, vmscan: only clear pgdat congested/dirty/writeback state when balanced · 631b6e08
      由 Mel Gorman 提交于 
      A pgdat tracks if recent reclaim encountered too many dirty, writeback
or congested pages.  The flags control whether kswapd writes pages back
from reclaim context, tags pages for immediate reclaim when IO
completes, whether processes block on wait_iff_congested and whether
kswapd blocks when too many pages marked for immediate reclaim are
encountered.

The state is cleared in a check function with side-effects.  With the
patch "mm, vmscan: fix zone balance check in prepare_kswapd_sleep", the
timing of when the bits get cleared changed.  Due to the way the check
works, it'll clear the bits if ZONE_DMA is balanced for a GFP_DMA
allocation because it does not account for lowmem reserves properly.

For the simoop workload, kswapd is not stalling when it should due to
the premature clearing, writing pages from reclaim context like crazy
and generally being unhelpful.

This patch resets the pgdat bits related to page reclaim only when
kswapd is going to sleep.  The comparison with simoop is then

                                         4.11.0-rc1            4.11.0-rc1            4.11.0-rc1
                                            vanilla           fixcheck-v2              clear-v2
Amean    p50-Read             21670074.18 (  0.00%) 20464344.18 (  5.56%) 19786774.76 (  8.69%)
Amean    p95-Read             25456267.64 (  0.00%) 25721423.64 ( -1.04%) 24101956.27 (  5.32%)
Amean    p99-Read             29369064.73 (  0.00%) 30174230.76 ( -2.74%) 27691872.71 (  5.71%)
Amean    p50-Write                1390.30 (  0.00%)     1395.28 ( -0.36%)     1011.91 ( 27.22%)
Amean    p95-Write              412901.57 (  0.00%)    37737.74 ( 90.86%)    34874.98 ( 91.55%)
Amean    p99-Write             6668722.09 (  0.00%)   666489.04 ( 90.01%)   575449.60 ( 91.37%)
Amean    p50-Allocation          78714.31 (  0.00%)    86286.22 ( -9.62%)    84246.26 ( -7.03%)
Amean    p95-Allocation         175533.51 (  0.00%)   351812.27 (-100.42%)   400058.43 (-127.91%)
Amean    p99-Allocation         247003.02 (  0.00%)  6291171.56 (-2447.00%) 10905600.00 (-4315.17%)

Read latency is improved, write latency is mostly improved but
allocation latency is regressed.  kswapd is still reclaiming
inefficiently, pages are being written back from writeback context and a
host of other issues.  However, given the change, it needed to be
spelled out why the side-effect was moved.

Link: http://lkml.kernel.org/r/20170309075657.25121-3-mgorman@techsingularity.netSigned-off-by: NMel Gorman <mgorman@techsingularity.net>
Acked-by: NVlastimil Babka <vbabka@suse.cz>
Cc: Hillf Danton <hillf.zj@alibaba-inc.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Shantanu Goel <sgoel01@yahoo.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      631b6e08
    • S
      mm, vmscan: fix zone balance check in prepare_kswapd_sleep · 333b0a45
      由 Shantanu Goel 提交于 
      Patch series "Reduce amount of time kswapd sleeps prematurely", v2.

The series is unusual in that the first patch fixes one problem and
introduces other issues that are noted in the changelog.  Patch 2 makes
a minor modification that is worth considering on its own but leaves the
kernel in a state where it behaves badly.  It's not until patch 3 that
there is an improvement against baseline.

This was mostly motivated by examining Chris Mason's "simoop" benchmark
which puts the VM under similar pressure to HADOOP.  It has been
reported that the benchmark has regressed severely during the last
number of releases.  While I cannot reproduce all the same problems
Chris experienced due to hardware limitations, there was a number of
problems on a 2-socket machine with a single disk.

simoop latencies
                                         4.11.0-rc1            4.11.0-rc1
                                            vanilla          keepawake-v2
Amean    p50-Read             21670074.18 (  0.00%) 22668332.52 ( -4.61%)
Amean    p95-Read             25456267.64 (  0.00%) 26738688.00 ( -5.04%)
Amean    p99-Read             29369064.73 (  0.00%) 30991404.52 ( -5.52%)
Amean    p50-Write                1390.30 (  0.00%)      924.91 ( 33.47%)
Amean    p95-Write              412901.57 (  0.00%)     1362.62 ( 99.67%)
Amean    p99-Write             6668722.09 (  0.00%)    16854.04 ( 99.75%)
Amean    p50-Allocation          78714.31 (  0.00%)    74729.74 (  5.06%)
Amean    p95-Allocation         175533.51 (  0.00%)   101609.74 ( 42.11%)
Amean    p99-Allocation         247003.02 (  0.00%)   125765.57 ( 49.08%)

These are latencies.  Read/write are threads reading fixed-size random
blocks from a simulated database.  The allocation latency is mmaping and
faulting regions of memory.  The p50, 95 and p99 reports the worst
latencies for 50% of the samples, 95% and 99% respectively.

For example, the report indicates that while the test was running 99% of
writes completed 99.75% faster.  It's worth noting that on a UMA machine
that no difference in performance with simoop was observed so milage
will vary.

It's noted that there is a slight impact to read latencies but it's
mostly due to IO scheduler decisions and offset by the large reduction
in other latencies.

This patch (of 3):

The check in prepare_kswapd_sleep needs to match the one in
balance_pgdat since the latter will return as soon as any one of the
zones in the classzone is above the watermark.  This is specially
important for higher order allocations since balance_pgdat will
typically reset the order to zero relying on compaction to create the
higher order pages.  Without this patch, prepare_kswapd_sleep fails to
wake up kcompactd since the zone balance check fails.

It was first reported against 4.9.7 that kswapd is failing to wake up
kcompactd due to a mismatch in the zone balance check between
balance_pgdat() and prepare_kswapd_sleep().

balance_pgdat() returns as soon as a single zone satisfies the
allocation but prepare_kswapd_sleep() requires all zones to do +the
same.  This causes prepare_kswapd_sleep() to never succeed except in the
order == 0 case and consequently, wakeup_kcompactd() is never called.
For the machine that originally motivated this patch, the state of
compaction from /proc/vmstat looked this way after a day and a half +of
uptime:

compact_migrate_scanned 240496
compact_free_scanned 76238632
compact_isolated 123472
compact_stall 1791
compact_fail 29
compact_success 1762
compact_daemon_wake 0

After applying the patch and about 10 hours of uptime the state looks
like this:

compact_migrate_scanned 59927299
compact_free_scanned 2021075136
compact_isolated 640926
compact_stall 4
compact_fail 2
compact_success 2
compact_daemon_wake 5160

Further notes from Mel that motivated him to pick this patch up and
resend it;

It was observed for the simoop workload (pressures the VM similar to
HADOOP) that kswapd was failing to keep ahead of direct reclaim.  The
investigation noted that there was a need to rationalise kswapd
decisions to reclaim with kswapd decisions to sleep.  With this patch on
a 2-socket box, there was a 49% reduction in direct reclaim scanning.

However, the impact otherwise is extremely negative.  Kswapd reclaim
efficiency dropped from 98% to 76%.  simoop has three latency-related
metrics for read, write and allocation (an anonymous mmap and fault).

                                         4.11.0-rc1            4.11.0-rc1
                                            vanilla           fixcheck-v2
Amean    p50-Read             21670074.18 (  0.00%) 20464344.18 (  5.56%)
Amean    p95-Read             25456267.64 (  0.00%) 25721423.64 ( -1.04%)
Amean    p99-Read             29369064.73 (  0.00%) 30174230.76 ( -2.74%)
Amean    p50-Write                1390.30 (  0.00%)     1395.28 ( -0.36%)
Amean    p95-Write              412901.57 (  0.00%)    37737.74 ( 90.86%)
Amean    p99-Write             6668722.09 (  0.00%)   666489.04 ( 90.01%)
Amean    p50-Allocation          78714.31 (  0.00%)    86286.22 ( -9.62%)
Amean    p95-Allocation         175533.51 (  0.00%)   351812.27 (-100.42%)
Amean    p99-Allocation         247003.02 (  0.00%)  6291171.56 (-2447.00%)

Of greater concern is that the patch causes swapping and page writes
from kswapd context rose from 0 pages to 4189753 pages during the hour
the workload ran for.  By and large, the patch has very bad behaviour
but easily missed as the impact on a UMA machine is negligible.

This patch is included with the data in case a bisection leads to this
area.  This patch is also a pre-requisite for the rest of the series.

Link: http://lkml.kernel.org/r/20170309075657.25121-2-mgorman@techsingularity.netSigned-off-by: NShantanu Goel <sgoel01@yahoo.com>
Signed-off-by: NMel Gorman <mgorman@techsingularity.net>
Acked-by: NHillf Danton <hillf.zj@alibaba-inc.com>
Acked-by: NVlastimil Babka <vbabka@suse.cz>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      333b0a45
    • M
      mm: introduce memalloc_nofs_{save,restore} API · 7dea19f9
      由 Michal Hocko 提交于 
      GFP_NOFS context is used for the following 5 reasons currently:

 - to prevent from deadlocks when the lock held by the allocation
   context would be needed during the memory reclaim

 - to prevent from stack overflows during the reclaim because the
   allocation is performed from a deep context already

 - to prevent lockups when the allocation context depends on other
   reclaimers to make a forward progress indirectly

 - just in case because this would be safe from the fs POV

 - silence lockdep false positives

Unfortunately overuse of this allocation context brings some problems to
the MM.  Memory reclaim is much weaker (especially during heavy FS
metadata workloads), OOM killer cannot be invoked because the MM layer
doesn't have enough information about how much memory is freeable by the
FS layer.

In many cases it is far from clear why the weaker context is even used
and so it might be used unnecessarily.  We would like to get rid of
those as much as possible.  One way to do that is to use the flag in
scopes rather than isolated cases.  Such a scope is declared when really
necessary, tracked per task and all the allocation requests from within
the context will simply inherit the GFP_NOFS semantic.

Not only this is easier to understand and maintain because there are
much less problematic contexts than specific allocation requests, this
also helps code paths where FS layer interacts with other layers (e.g.
crypto, security modules, MM etc...) and there is no easy way to convey
the allocation context between the layers.

Introduce memalloc_nofs_{save,restore} API to control the scope of
GFP_NOFS allocation context.  This is basically copying
memalloc_noio_{save,restore} API we have for other restricted allocation
context GFP_NOIO.  The PF_MEMALLOC_NOFS flag already exists and it is
just an alias for PF_FSTRANS which has been xfs specific until recently.
There are no more PF_FSTRANS users anymore so let's just drop it.

PF_MEMALLOC_NOFS is now checked in the MM layer and drops __GFP_FS
implicitly same as PF_MEMALLOC_NOIO drops __GFP_IO.  memalloc_noio_flags
is renamed to current_gfp_context because it now cares about both
PF_MEMALLOC_NOFS and PF_MEMALLOC_NOIO contexts.  Xfs code paths preserve
their semantic.  kmem_flags_convert() doesn't need to evaluate the flag
anymore.

This patch shouldn't introduce any functional changes.

Let's hope that filesystems will drop direct GFP_NOFS (resp.  ~__GFP_FS)
usage as much as possible and only use a properly documented
memalloc_nofs_{save,restore} checkpoints where they are appropriate.

[akpm@linux-foundation.org: fix comment typo, reflow comment]
Link: http://lkml.kernel.org/r/20170306131408.9828-5-mhocko@kernel.orgSigned-off-by: NMichal Hocko <mhocko@suse.com>
Acked-by: NVlastimil Babka <vbabka@suse.cz>
Cc: Dave Chinner <david@fromorbit.com>
Cc: Theodore Ts'o <tytso@mit.edu>
Cc: Chris Mason <clm@fb.com>
Cc: David Sterba <dsterba@suse.cz>
Cc: Jan Kara <jack@suse.cz>
Cc: Brian Foster <bfoster@redhat.com>
Cc: Darrick J. Wong <darrick.wong@oracle.com>
Cc: Nikolay Borisov <nborisov@suse.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      7dea19f9
    • S
      mm: reclaim MADV_FREE pages · 802a3a92
      由 Shaohua Li 提交于 
      When memory pressure is high, we free MADV_FREE pages.  If the pages are
not dirty in pte, the pages could be freed immediately.  Otherwise we
can't reclaim them.  We put the pages back to anonumous LRU list (by
setting SwapBacked flag) and the pages will be reclaimed in normal
swapout way.

We use normal page reclaim policy.  Since MADV_FREE pages are put into
inactive file list, such pages and inactive file pages are reclaimed
according to their age.  This is expected, because we don't want to
reclaim too many MADV_FREE pages before used once pages.

Based on Minchan's original patch

[minchan@kernel.org: clean up lazyfree page handling]
  Link: http://lkml.kernel.org/r/20170303025237.GB3503@bbox
Link: http://lkml.kernel.org/r/14b8eb1d3f6bf6cc492833f183ac8c304e560484.1487965799.git.shli@fb.comSigned-off-by: NShaohua Li <shli@fb.com>
Signed-off-by: NMinchan Kim <minchan@kernel.org>
Acked-by: NMinchan Kim <minchan@kernel.org>
Acked-by: NMichal Hocko <mhocko@suse.com>
Acked-by: NJohannes Weiner <hannes@cmpxchg.org>
Acked-by: NHillf Danton <hillf.zj@alibaba-inc.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Mel Gorman <mgorman@techsingularity.net>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      802a3a92
    • S
      mm: delete unnecessary TTU_* flags · a128ca71
      由 Shaohua Li 提交于 
      Patch series "mm: fix some MADV_FREE issues", v5.

We are trying to use MADV_FREE in jemalloc.  Several issues are found.
Without solving the issues, jemalloc can't use the MADV_FREE feature.

 - Doesn't support system without swap enabled. Because if swap is off,
   we can't or can't efficiently age anonymous pages. And since
   MADV_FREE pages are mixed with other anonymous pages, we can't
   reclaim MADV_FREE pages. In current implementation, MADV_FREE will
   fallback to MADV_DONTNEED without swap enabled. But in our
   environment, a lot of machines don't enable swap. This will prevent
   our setup using MADV_FREE.

 - Increases memory pressure. page reclaim bias file pages reclaim
   against anonymous pages. This doesn't make sense for MADV_FREE pages,
   because those pages could be freed easily and refilled with very
   slight penality. Even page reclaim doesn't bias file pages, there is
   still an issue, because MADV_FREE pages and other anonymous pages are
   mixed together. To reclaim a MADV_FREE page, we probably must scan a
   lot of other anonymous pages, which is inefficient. In our test, we
   usually see oom with MADV_FREE enabled and nothing without it.

 - Accounting. There are two accounting problems. We don't have a global
   accounting. If the system is abnormal, we don't know if it's a
   problem from MADV_FREE side. The other problem is RSS accounting.
   MADV_FREE pages are accounted as normal anon pages and reclaimed
   lazily, so application's RSS becomes bigger. This confuses our
   workloads. We have monitoring daemon running and if it finds
   applications' RSS becomes abnormal, the daemon will kill the
   applications even kernel can reclaim the memory easily.

To address the first the two issues, we can either put MADV_FREE pages
into a separate LRU list (Minchan's previous patches and V1 patches), or
put them into LRU_INACTIVE_FILE list (suggested by Johannes).  The
patchset use the second idea.  The reason is LRU_INACTIVE_FILE list is
tiny nowadays and should be full of used once file pages.  So we can
still efficiently reclaim MADV_FREE pages there without interference
with other anon and active file pages.  Putting the pages into inactive
file list also has an advantage which allows page reclaim to prioritize
MADV_FREE pages and used once file pages.  MADV_FREE pages are put into
the lru list and clear SwapBacked flag, so PageAnon(page) &&
!PageSwapBacked(page) will indicate a MADV_FREE pages.  These pages will
directly freed without pageout if they are clean, otherwise normal swap
will reclaim them.

For the third issue, the previous post adds global accounting and a
separate RSS count for MADV_FREE pages.  The problem is we never get
accurate accounting for MADV_FREE pages.  The pages are mapped to
userspace, can be dirtied without notice from kernel side.  To get
accurate accounting, we could write protect the page, but then there is
extra page fault overhead, which people don't want to pay.  Jemalloc
guys have concerns about the inaccurate accounting, so this post drops
the accounting patches temporarily.  The info exported to
/proc/pid/smaps for MADV_FREE pages are kept, which is the only place we
can get accurate accounting right now.

This patch (of 6):

Johannes pointed out TTU_LZFREE is unnecessary.  It's true because we
always have the flag set if we want to do an unmap.  For cases we don't
do an unmap, the TTU_LZFREE part of code should never run.

Also the TTU_UNMAP is unnecessary.  If no other flags set (for example,
TTU_MIGRATION), an unmap is implied.

The patch includes Johannes's cleanup and dead TTU_ACTION macro removal
code

Link: http://lkml.kernel.org/r/4be3ea1bc56b26fd98a54d0a6f70bec63f6d8980.1487965799.git.shli@fb.comSigned-off-by: NShaohua Li <shli@fb.com>
Suggested-by: NJohannes Weiner <hannes@cmpxchg.org>
Acked-by: NJohannes Weiner <hannes@cmpxchg.org>
Acked-by: NMinchan Kim <minchan@kernel.org>
Acked-by: NHillf Danton <hillf.zj@alibaba-inc.com>
Acked-by: NMichal Hocko <mhocko@suse.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Mel Gorman <mgorman@techsingularity.net>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      a128ca71
    • J
      Revert "mm, vmscan: account for skipped pages as a partial scan" · 3db65812
      由 Johannes Weiner 提交于 
      This reverts commit d7f05528.

Now that reclaimability of a node is no longer based on the ratio
between pages scanned and theoretically reclaimable pages, we can remove
accounting tricks for pages skipped due to zone constraints.

Link: http://lkml.kernel.org/r/20170228214007.5621-9-hannes@cmpxchg.orgSigned-off-by: NJohannes Weiner <hannes@cmpxchg.org>
Acked-by: NHillf Danton <hillf.zj@alibaba-inc.com>
Acked-by: NMichal Hocko <mhocko@suse.com>
Cc: Jia He <hejianet@gmail.com>
Cc: Mel Gorman <mgorman@suse.de>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      3db65812
    • J
      mm: delete NR_PAGES_SCANNED and pgdat_reclaimable() · c822f622
      由 Johannes Weiner 提交于 
      NR_PAGES_SCANNED counts number of pages scanned since the last page free
event in the allocator.  This was used primarily to measure the
reclaimability of zones and nodes, and determine when reclaim should
give up on them.  In that role, it has been replaced in the preceding
patches by a different mechanism.

Being implemented as an efficient vmstat counter, it was automatically
exported to userspace as well.  It's however unlikely that anyone
outside the kernel is using this counter in any meaningful way.

Remove the counter and the unused pgdat_reclaimable().

Link: http://lkml.kernel.org/r/20170228214007.5621-8-hannes@cmpxchg.orgSigned-off-by: NJohannes Weiner <hannes@cmpxchg.org>
Acked-by: NHillf Danton <hillf.zj@alibaba-inc.com>
Acked-by: NMichal Hocko <mhocko@suse.com>
Cc: Jia He <hejianet@gmail.com>
Cc: Mel Gorman <mgorman@suse.de>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      c822f622