replace:
 #if defined(CONFIG_USB_SI470X) || \
     defined(CONFIG_USB_SI470X_MODULE)
with:
 #if IS_ENABLED(CONFIG_USB_SI470X)
This change was made for: CONFIG_USB_SI470X,
CONFIG_I2C_SI470X
Reported-by: NMauro Carvalho Chehab <mchehab@redhat.com>
Signed-off-by: NPeter Senna Tschudin <peter.senna@gmail.com>
Signed-off-by: NHans de Goede <hdegoede@redhat.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Signed-off-by: NHans de Goede <hdegoede@redhat.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

The mask was wrong resulting in band 0 and 1 always ending up as band 0
in the register.
Signed-off-by: NHans de Goede <hdegoede@redhat.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Testing with a firmware version 12 usb radio stick has shown version 12
to work fine too.
Reported-by: NAntti Palosaari <crope@iki.fi>
Signed-off-by: NHans de Goede <hdegoede@redhat.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

With the changes from the previous patches device firmware version 14 +
usb microcontroller software version 1 works fine too.
Signed-off-by: NHans de Goede <hdegoede@redhat.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Since USB receives STATUS_RSSI updates through the interrupt endpoint,
there is no need to poll with USB, so get rid of the polling.

Note this also changes the order in which the probing of USB devices is done,
to avoid si470x_set_chan getting called before the interrupt endpoint is being
monitored.
Signed-off-by: NHans de Goede <hdegoede@redhat.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Reading registers from the pcear USB dongles with the si470x causes a
loud pop (and an alsa buffer overrun). Since most radio apps periodically
call G_TUNER to update mono/stereo, signal and afc status this leads
to the music . pop . music . pop . music -> not good.

On the internet there is an howto for flashing the pcear with a newer
firmware from the silabs reference boardto fix this, but:
1) This howto relies on a special version of the driver which allows
   firmware flashing
2) We should try to avoid the answer to a bug report being upgrade your
   firmware, if at all possible
3) Windows does not suffer from the pop sounds

After a quick look at the driver I found at that the register reads are
not necessary at all, as the device gives us the necessary status through
usb interrupt packets, and the driver already uses these!
Signed-off-by: NHans de Goede <hdegoede@redhat.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

This cleans up the code and si470x now uses the proper v4l2 frameworks
and passes most of the v4l2-compliance tests.
Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com>
Acked-by: NTobias Lorenz <tobias.lorenz@gmx.net>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Just like the video drivers, the right thing to do is to use
the per-subsystem version control.
Acked-by: NHans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Signed-off-by: NJoonyoung Shim <jy0922.shim@samsung.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Currently we use busy waiting to seek and tune, it can replace to
interrupt way. SI470X I2C driver supports interrupt way to week and tune
via this patch.
Signed-off-by: NJoonyoung Shim <jy0922.shim@samsung.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

The naming of the media/rds.h header suggested that it was a generic
RDS header, when in fact it is just a saa6588 module API that is
internal to the kernel.

Rename the header and the struct and defines in it to make this clear.

Also removed the header include in radio-si470x.h (not used anymore)
and from ioctl-number.txt (it's internal to the kernel and never called
from userspace).
Signed-off-by: NHans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

The big kernel lock has been removed from all these files at some point,
leaving only the #include.

Remove this too as a cleanup.
Signed-off-by: NArnd Bergmann <arnd@arndb.de>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Driver needs to #include <sched.h>:

drivers/media/radio/si470x/radio-si470x-common.c:452: error: 'TASK_INTERRUPTIBLE' undeclared (first use in this function)
drivers/media/radio/si470x/radio-si470x-common.c:452: error: implicit declaration of function 'signal_pending'
drivers/media/radio/si470x/radio-si470x-common.c:452: error: implicit declaration of function 'schedule'
Signed-off-by: NRandy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

This patch is to support RDS on si470x i2c driver. The routine of RDS
operation is almost same with thing of usb driver, but this uses RDS
interrupt.
Signed-off-by: NJoonyoung Shim <jy0922.shim@samsung.com>
Acked-by: NTobias Lorenz <tobias.lorenz@gmx.net>
Signed-off-by: NDouglas Schilling Landgraf <dougsland@redhat.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

The read and poll file operations of the si470x usb driver can be used
also equally on the si470x i2c driver, so they go to the common file.
Signed-off-by: NJoonyoung Shim <jy0922.shim@samsung.com>
Acked-by: NTobias Lorenz <tobias.lorenz@gmx.net>
Signed-off-by: NDouglas Schilling Landgraf <dougsland@redhat.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

The structure and comments of the I2C part have been adopted to fit to the
USB part.

Some additional cleanups and precisements have been made to the version
detection and checking functionality to clearly separate HW/SW/FW version.
Signed-off-by: NTobias Lorenz <tobias.lorenz@gmx.net>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

This patch supports i2c interface of si470x. The i2c specific part
exists in radio-si470x-i2c.c file and the common part uses
radio-si470x-common.c file. The '#if defined' is inserted inevitably
because of parts used only si470x usb in the common file.

The current driver version doesn't support the RDS.
Signed-off-by: NJoonyoung Shim <jy0922.shim@samsung.com>
Signed-off-by: NTobias Lorenz <tobias.lorenz@gmx.net>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

The si470x_disconnect_check is function to check disconnect state of
radio in common file. The function is implemented in each interface
file.
Signed-off-by: NJoonyoung Shim <jy0922.shim@samsung.com>
Signed-off-by: NTobias Lorenz <tobias.lorenz@gmx.net>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

This patch is a preceding work to add the i2c interface of si470x.
The si470x directory includes a common file and usb specific file and
header file.
The part unrelated with usb interface and i2c interface exists in
radio-si470x-common.c file, and The usb specific part exists in
radio-si470x-usb.c file.
Signed-off-by: NJoonyoung Shim <jy0922.shim@samsung.com>
[tobias.lorenz@gmx.net: Small changes, due to new include "linux/smp_lock.h"]
Signed-off-by: NTobias Lorenz <tobias.lorenz@gmx.net>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>