- 03 6月, 2016 5 次提交
-
-
由 Jaegeuk Kim 提交于
If roll-forward recovery can recover i_size, we don't need to update inode's metadata during fsync. Signed-off-by: NJaegeuk Kim <jaegeuk@kernel.org>
-
由 Jaegeuk Kim 提交于
This patch reduces to call them across the whole tree. - sync_inode_page() - update_inode_page() - update_inode() - f2fs_write_inode() Instead, checkpoint will flush all the dirty inode metadata before syncing node pages. Note that, this is doable, since we call mark_inode_dirty_sync() for all inode's field change which needs to update on-disk inode as well. Signed-off-by: NJaegeuk Kim <jaegeuk@kernel.org>
-
由 Jaegeuk Kim 提交于
This patch registers all the inodes which have dirty metadata to sync when checkpoint is doing. Signed-off-by: NJaegeuk Kim <jaegeuk@kernel.org>
-
由 Jaegeuk Kim 提交于
This patch calls mark_inode_dirty_sync() for the following on-disk inode changes. -> largest -> ctime/mtime/atime -> i_current_depth -> i_xattr_nid -> i_pino -> i_advise -> i_flags -> i_mode Signed-off-by: NJaegeuk Kim <jaegeuk@kernel.org>
-
由 Jaegeuk Kim 提交于
This patch refactors to use inode pointer for set_inode_flag and clear_inode_flag. Signed-off-by: NJaegeuk Kim <jaegeuk@kernel.org>
-
- 21 5月, 2016 1 次提交
-
-
由 Chao Yu 提交于
Once we failed to merge inline data into inode page during flushing inline inode, we will skip invoking inode_dec_dirty_pages, which makes dirty page count incorrect, result in panic in ->evict_inode, Fix it. ------------[ cut here ]------------ kernel BUG at /home/yuchao/git/devf2fs/inode.c:336! invalid opcode: 0000 [#1] PREEMPT SMP CPU: 3 PID: 10004 Comm: umount Tainted: G O 4.6.0-rc5+ #17 Hardware name: innotek GmbH VirtualBox/VirtualBox, BIOS VirtualBox 12/01/2006 task: f0c33000 ti: c5212000 task.ti: c5212000 EIP: 0060:[<f89aacb5>] EFLAGS: 00010202 CPU: 3 EIP is at f2fs_evict_inode+0x85/0x490 [f2fs] EAX: 00000001 EBX: c4529ea0 ECX: 00000001 EDX: 00000000 ESI: c0131000 EDI: f89dd0a0 EBP: c5213e9c ESP: c5213e78 DS: 007b ES: 007b FS: 00d8 GS: 0033 SS: 0068 CR0: 80050033 CR2: b75878c0 CR3: 1a36a700 CR4: 000406f0 Stack: c4529ea0 c4529ef4 c5213e8c c176d45c c4529ef4 00000000 c4529ea0 c4529fac f89dd0a0 c5213eb0 c1204a68 c5213ed8 c452a2b4 c6680930 c5213ec0 c1204b64 c6680d44 c6680620 c5213eec c120588d ee84b000 ee84b5c0 c5214000 ee84b5e0 Call Trace: [<c176d45c>] ? _raw_spin_unlock+0x2c/0x50 [<c1204a68>] evict+0xa8/0x170 [<c1204b64>] dispose_list+0x34/0x50 [<c120588d>] evict_inodes+0x10d/0x130 [<c11ea941>] generic_shutdown_super+0x41/0xe0 [<c1185190>] ? unregister_shrinker+0x40/0x50 [<c1185190>] ? unregister_shrinker+0x40/0x50 [<c11eac52>] kill_block_super+0x22/0x70 [<f89af23e>] kill_f2fs_super+0x1e/0x20 [f2fs] [<c11eae1d>] deactivate_locked_super+0x3d/0x70 [<c11eb383>] deactivate_super+0x43/0x60 [<c1208ec9>] cleanup_mnt+0x39/0x80 [<c1208f50>] __cleanup_mnt+0x10/0x20 [<c107d091>] task_work_run+0x71/0x90 [<c105725a>] exit_to_usermode_loop+0x72/0x9e [<c1001c7c>] do_fast_syscall_32+0x19c/0x1c0 [<c176dd48>] sysenter_past_esp+0x45/0x74 EIP: [<f89aacb5>] f2fs_evict_inode+0x85/0x490 [f2fs] SS:ESP 0068:c5213e78 ---[ end trace d30536330b7fdc58 ]--- Signed-off-by: NChao Yu <yuchao0@huawei.com> Signed-off-by: NJaegeuk Kim <jaegeuk@kernel.org>
-
- 08 5月, 2016 4 次提交
-
-
由 Jaegeuk Kim 提交于
This patch enables reading node blocks in advance when truncating large data blocks. > time rm $MNT/testfile (500GB) after drop_cachees Before : 9.422 s After : 4.821 s Reported-by: NStephen Bates <stephen.bates@microsemi.com> Signed-off-by: NJaegeuk Kim <jaegeuk@kernel.org>
-
由 Jaegeuk Kim 提交于
This patch removes an obsolete variable used in add_free_nid. Signed-off-by: NJaegeuk Kim <jaegeuk@kernel.org>
-
由 Jaegeuk Kim 提交于
This patch injects ENOSPC failures. Signed-off-by: NJaegeuk Kim <jaegeuk@kernel.org>
-
由 Jaegeuk Kim 提交于
This patch converts grab_cache_page to f2fs_grab_cache_page. Signed-off-by: NJaegeuk Kim <jaegeuk@kernel.org>
-
- 28 4月, 2016 1 次提交
-
-
由 Chao Yu 提交于
For foreground GC, we cache node blocks in victim section and set them dirty, then we call sync_node_pages to flush these node pages, but meanwhile, those node pages which does not locate in victim section will be flushed together, so more bandwidth and continuous free space would be occupied. So for this condition, it's better to leave those unrelated node page in cache for further write hit, and let CP or VM to flush them afterward. Signed-off-by: NChao Yu <yuchao0@huawei.com> Signed-off-by: NJaegeuk Kim <jaegeuk@kernel.org>
-
- 27 4月, 2016 4 次提交
-
-
由 Jaegeuk Kim 提交于
In order to give atomic writes, we should consider power failure during sync_node_pages in fsync. So, this patch marks fsync flag only in the last dnode block. Acked-by: NChao Yu <yuchao0@huawei.com> Signed-off-by: NJaegeuk Kim <jaegeuk@kernel.org>
-
由 Jaegeuk Kim 提交于
The fsync_node_pages should return pass or failure so that user could know fsync is completed or not. Acked-by: NChao Yu <yuchao0@huawei.com> Signed-off-by: NJaegeuk Kim <jaegeuk@kernel.org>
-
由 Jaegeuk Kim 提交于
This patch splits the existing sync_node_pages into (f)sync_node_pages. The fsync_node_pages is used for f2fs_sync_file only. Acked-by: NChao Yu <yuchao0@huawei.com> Signed-off-by: NJaegeuk Kim <jaegeuk@kernel.org>
-
由 Jaegeuk Kim 提交于
When fsync is called, sync_node_pages finds a proper direct node pages to flush. But, it locks unrelated direct node pages together unnecessarily. Acked-by: NChao Yu <yuchao0@huawei.com> Signed-off-by: NJaegeuk Kim <jaegeuk@kernel.org>
-
- 15 4月, 2016 2 次提交
-
-
由 Jaegeuk Kim 提交于
This patch adds BUG_ON instead of retrying loop. In the case of node pages, we already got this inode page, but unlocked it. By the fact that we don't truncate any node pages in operations, the page's mapping should be unchangeable. Signed-off-by: NJaegeuk Kim <jaegeuk@kernel.org>
-
由 Jaegeuk Kim 提交于
Previously, after trylock_page is succeeded, it doesn't check its mapping. In order to fix that, we can just give PGP_LOCK to pagecache_get_page. Signed-off-by: NJaegeuk Kim <jaegeuk@kernel.org>
-
- 05 4月, 2016 1 次提交
-
-
由 Kirill A. Shutemov 提交于
PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} macros were introduced *long* time ago with promise that one day it will be possible to implement page cache with bigger chunks than PAGE_SIZE. This promise never materialized. And unlikely will. We have many places where PAGE_CACHE_SIZE assumed to be equal to PAGE_SIZE. And it's constant source of confusion on whether PAGE_CACHE_* or PAGE_* constant should be used in a particular case, especially on the border between fs and mm. Global switching to PAGE_CACHE_SIZE != PAGE_SIZE would cause to much breakage to be doable. Let's stop pretending that pages in page cache are special. They are not. The changes are pretty straight-forward: - <foo> << (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>; - <foo> >> (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>; - PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} -> PAGE_{SIZE,SHIFT,MASK,ALIGN}; - page_cache_get() -> get_page(); - page_cache_release() -> put_page(); This patch contains automated changes generated with coccinelle using script below. For some reason, coccinelle doesn't patch header files. I've called spatch for them manually. The only adjustment after coccinelle is revert of changes to PAGE_CAHCE_ALIGN definition: we are going to drop it later. There are few places in the code where coccinelle didn't reach. I'll fix them manually in a separate patch. Comments and documentation also will be addressed with the separate patch. virtual patch @@ expression E; @@ - E << (PAGE_CACHE_SHIFT - PAGE_SHIFT) + E @@ expression E; @@ - E >> (PAGE_CACHE_SHIFT - PAGE_SHIFT) + E @@ @@ - PAGE_CACHE_SHIFT + PAGE_SHIFT @@ @@ - PAGE_CACHE_SIZE + PAGE_SIZE @@ @@ - PAGE_CACHE_MASK + PAGE_MASK @@ expression E; @@ - PAGE_CACHE_ALIGN(E) + PAGE_ALIGN(E) @@ expression E; @@ - page_cache_get(E) + get_page(E) @@ expression E; @@ - page_cache_release(E) + put_page(E) Signed-off-by: NKirill A. Shutemov <kirill.shutemov@linux.intel.com> Acked-by: NMichal Hocko <mhocko@suse.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 18 3月, 2016 3 次提交
-
-
由 Jaegeuk Kim 提交于
If many threads calls fsync with data writes, we don't need to flush every bios having node page writes. The f2fs_wait_on_page_writeback will flush its bios when the page is really needed. Signed-off-by: NJaegeuk Kim <jaegeuk@kernel.org>
-
由 Jaegeuk Kim 提交于
Just to avoid sparse warnings. Signed-off-by: NJaegeuk Kim <jaegeuk@kernel.org>
-
由 Fan Li 提交于
ra_node_page() is used to read ahead one node page. Comparing to regular read, it's faster because it doesn't wait for IO completion. But if it is called twice for reading the same block, and the IO request from the first call hasn't been completed before the second call, the second call will have to wait until the read is over. Here use the code in __do_page_cache_readahead() to solve this problem. It does nothing when someone else already puts the page in mapping. The status of page should be assured by whoever puts it there. This implement also prevents alteration of page reference count. Signed-off-by: NFan li <fanofcode.li@samsung.com> Signed-off-by: NJaegeuk Kim <jaegeuk@kernel.org>
-
- 27 2月, 2016 1 次提交
-
-
由 Chao Yu 提交于
When testing with fsstress, kworker and user threads were both blocked: INFO: task kworker/u16:1:16580 blocked for more than 120 seconds. "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. kworker/u16:1 D ffff8803f2595390 0 16580 2 0x00000000 Workqueue: writeback bdi_writeback_workfn (flush-251:0) ffff8802730e5760 0000000000000046 ffff880274729fc0 0000000000012440 ffff8802730e5fd8 ffff8802730e4010 0000000000012440 0000000000012440 ffff8802730e5fd8 0000000000012440 ffff880274729fc0 ffff88026eb50000 Call Trace: [<ffffffff816fe9d9>] schedule+0x29/0x70 [<ffffffff816ff895>] rwsem_down_read_failed+0xa5/0xf9 [<ffffffff81378584>] call_rwsem_down_read_failed+0x14/0x30 [<ffffffffa0694feb>] f2fs_write_data_page+0x31b/0x420 [f2fs] [<ffffffffa0690f1a>] __f2fs_writepage+0x1a/0x50 [f2fs] [<ffffffffa06922a0>] f2fs_write_data_pages+0xe0/0x290 [f2fs] [<ffffffff811473b3>] do_writepages+0x23/0x40 [<ffffffff811cc3ee>] __writeback_single_inode+0x4e/0x250 [<ffffffff811cd4f1>] writeback_sb_inodes+0x2c1/0x470 [<ffffffff811cd73e>] __writeback_inodes_wb+0x9e/0xd0 [<ffffffff811cda0b>] wb_writeback+0x1fb/0x2d0 [<ffffffff811cdb7c>] wb_do_writeback+0x9c/0x220 [<ffffffff811ce232>] bdi_writeback_workfn+0x72/0x1c0 [<ffffffff8106b74e>] process_one_work+0x1de/0x5b0 [<ffffffff8106e78f>] worker_thread+0x11f/0x3e0 [<ffffffff810750ce>] kthread+0xde/0xf0 [<ffffffff817093f8>] ret_from_fork+0x58/0x90 fsstress thread stack: [<ffffffff81139f0e>] sleep_on_page+0xe/0x20 [<ffffffff81139ef7>] __lock_page+0x67/0x70 [<ffffffff8113b100>] find_lock_page+0x50/0x80 [<ffffffff8113b24f>] find_or_create_page+0x3f/0xb0 [<ffffffffa06983a9>] sync_node_pages+0x259/0x810 [f2fs] [<ffffffffa068d874>] write_checkpoint+0x1a4/0xce0 [f2fs] [<ffffffffa0686b0c>] f2fs_sync_fs+0x7c/0xd0 [f2fs] [<ffffffffa067c813>] f2fs_sync_file+0x143/0x5f0 [f2fs] [<ffffffff811d301b>] vfs_fsync_range+0x2b/0x40 [<ffffffff811d304c>] vfs_fsync+0x1c/0x20 [<ffffffff811d3291>] do_fsync+0x41/0x70 [<ffffffff811d32d3>] SyS_fdatasync+0x13/0x20 [<ffffffff817094a2>] system_call_fastpath+0x16/0x1b [<ffffffffffffffff>] 0xffffffffffffffff The reason of this issue is: CPU0: CPU1: - f2fs_write_data_pages - f2fs_sync_fs - write_checkpoint - block_operations - f2fs_lock_all - down_write(sbi->cp_rwsem) - lock_page(page) - f2fs_write_data_page - sync_node_pages - flush_inline_data - pagecache_get_page(page, GFP_LOCK) - f2fs_lock_op - down_read(sbi->cp_rwsem) This patch alters to use trylock_page in flush_inline_data to fix this ABBA deadlock issue. Signed-off-by: NChao Yu <chao2.yu@samsung.com> Signed-off-by: NJaegeuk Kim <jaegeuk@kernel.org>
-
- 26 2月, 2016 1 次提交
-
-
由 Chao Yu 提交于
1. Inode mapping tree can index page in range of [0, ULONG_MAX], however, in some places, f2fs only search or iterate page in ragne of [0, LONG_MAX], result in miss hitting in page cache. 2. filemap_fdatawait_range accepts range parameters in unit of bytes, so the max range it covers should be [0, LLONG_MAX], if we use [0, LONG_MAX] as range for waiting on writeback, big number of pages will not be covered. This patch corrects above two issues. Signed-off-by: NChao Yu <chao2.yu@samsung.com> Signed-off-by: NJaegeuk Kim <jaegeuk@kernel.org>
-
- 23 2月, 2016 13 次提交
-
-
由 Chao Yu 提交于
This patch enables to trace old block address of CoWed page for better debugging. f2fs_submit_page_mbio: dev = (1,0), ino = 1, page_index = 0x1d4f0, oldaddr = 0xfe8ab, newaddr = 0xfee90 rw = WRITE_SYNC, type = NODE f2fs_submit_page_mbio: dev = (1,0), ino = 1, page_index = 0x1d4f8, oldaddr = 0xfe8b0, newaddr = 0xfee91 rw = WRITE_SYNC, type = NODE f2fs_submit_page_mbio: dev = (1,0), ino = 1, page_index = 0x1d4fa, oldaddr = 0xfe8ae, newaddr = 0xfee92 rw = WRITE_SYNC, type = NODE f2fs_submit_page_mbio: dev = (1,0), ino = 134824, page_index = 0x96, oldaddr = 0xf049b, newaddr = 0x2bbe rw = WRITE, type = DATA f2fs_submit_page_mbio: dev = (1,0), ino = 134824, page_index = 0x97, oldaddr = 0xf049c, newaddr = 0x2bbf rw = WRITE, type = DATA f2fs_submit_page_mbio: dev = (1,0), ino = 134824, page_index = 0x98, oldaddr = 0xf049d, newaddr = 0x2bc0 rw = WRITE, type = DATA f2fs_submit_page_mbio: dev = (1,0), ino = 135260, page_index = 0x47, oldaddr = 0xffffffff, newaddr = 0xf2631 rw = WRITE, type = DATA f2fs_submit_page_mbio: dev = (1,0), ino = 135260, page_index = 0x48, oldaddr = 0xffffffff, newaddr = 0xf2632 rw = WRITE, type = DATA f2fs_submit_page_mbio: dev = (1,0), ino = 135260, page_index = 0x49, oldaddr = 0xffffffff, newaddr = 0xf2633 rw = WRITE, type = DATA Signed-off-by: NChao Yu <chao2.yu@samsung.com> Signed-off-by: NJaegeuk Kim <jaegeuk@kernel.org>
-
由 Chao Yu 提交于
When flushing node pages, if current node page is an inline inode page, we will try to merge inline data from data page into inline inode page, then skip flushing current node page, it will decrease the number of nodes to be flushed in batch in this round, which may lead to worse performance. This patch gives a chance to flush just merged inline inode pages for performance. Signed-off-by: NChao Yu <chao2.yu@samsung.com> Signed-off-by: NJaegeuk Kim <jaegeuk@kernel.org>
-
由 Chao Yu 提交于
When lookuping nat entry in cache_nat_entry, if we fail to hit nat cache, we try to load nat entries a) from journal of current segment cache or b) from NAT pages for updating, during the process, write lock of nat_tree_lock will be held to avoid inconsistent condition in between nid cache and nat cache caused by racing among nat entry shrinker, checkpointer, nat entry updater. But this way may cause low efficient when updating nat cache, because it serializes accessing in journal cache or reading NAT pages. Here, we reorder lock and update flow as below to enhance accessing concurrency: - get_node_info - down_read(nat_tree_lock) - lookup nat cache --- hit -> unlock & return - lookup journal cache --- hit -> unlock & goto update - up_read(nat_tree_lock) update: - down_write(nat_tree_lock) - cache_nat_entry - lookup nat cache --- nohit -> update - up_write(nat_tree_lock) Signed-off-by: NChao Yu <chao2.yu@samsung.com> Signed-off-by: NJaegeuk Kim <jaegeuk@kernel.org>
-
由 Chao Yu 提交于
In curseg cache, f2fs caches two different parts: - datas of current summay block, i.e. summary entries, footer info. - journal info, i.e. sparse nat/sit entries or io stat info. With this approach, 1) it may cause higher lock contention when we access or update both of the parts of cache since we use the same mutex lock curseg_mutex to protect the cache. 2) current summary block with last journal info will be writebacked into device as a normal summary block when flushing, however, we treat journal info as valid one only in current summary, so most normal summary blocks contain junk journal data, it wastes remaining space of summary block. So, in order to fix above issues, we split curseg cache into two parts: a) current summary block, protected by original mutex lock curseg_mutex b) journal cache, protected by newly introduced r/w semaphore journal_rwsem When loading curseg cache during ->mount, we store summary info and journal info into different caches; When doing checkpoint, we combine datas of two cache into current summary block for persisting. Signed-off-by: NChao Yu <chao2.yu@samsung.com> Signed-off-by: NJaegeuk Kim <jaegeuk@kernel.org>
-
由 Chao Yu 提交于
Introduce a new structure f2fs_journal to wrap journal info in struct f2fs_summary_block for readability. struct f2fs_journal { union { __le16 n_nats; __le16 n_sits; }; union { struct nat_journal nat_j; struct sit_journal sit_j; struct f2fs_extra_info info; }; } __packed; struct f2fs_summary_block { struct f2fs_summary entries[ENTRIES_IN_SUM]; struct f2fs_journal journal; struct summary_footer footer; } __packed; Signed-off-by: NChao Yu <chao2.yu@samsung.com> Signed-off-by: NJaegeuk Kim <jaegeuk@kernel.org>
-
由 Yunlei He 提交于
fix missing skip pages info in f2fs_writepages trace event. Signed-off-by: NYunlei He <heyunlei@huawei.com> Signed-off-by: NJaegeuk Kim <jaegeuk@kernel.org>
-
由 Chao Yu 提交于
f2fs use single bio buffer per type data (META/NODE/DATA) for caching writes locating in continuous block address as many as possible, after submitting, these writes may be still cached in bio buffer, so we have to flush cached writes in bio buffer by calling f2fs_submit_merged_bio. Unfortunately, in the scenario of high concurrency, bio buffer could be flushed by someone else before we submit it as below reasons: a) there is no space in bio buffer. b) add a request of different type (SYNC, ASYNC). c) add a discontinuous block address. For this condition, f2fs_submit_merged_bio will be devastating, because it could break the following merging of writes in bio buffer, split one big bio into two smaller one. This patch introduces f2fs_submit_merged_bio_cond which can do a conditional submitting with bio buffer, before submitting it will judge whether: - page in DATA type bio buffer is matching with specified page; - page in DATA type bio buffer is belong to specified inode; - page in NODE type bio buffer is belong to specified inode; If there is no eligible page in bio buffer, we will skip submitting step, result in gaining more chance to merge consecutive block IOs in bio cache. Signed-off-by: NChao Yu <chao2.yu@samsung.com> Signed-off-by: NJaegeuk Kim <jaegeuk@kernel.org>
-
由 Jaegeuk Kim 提交于
Likewise f2fs_write_cache_pages, let's do for node and meta pages too. Especially, for node blocks, we should do this before marking its fsync and dentry flags. Signed-off-by: NJaegeuk Kim <jaegeuk@kernel.org>
-
由 Chao Yu 提交于
When seeking data in ->llseek, if we encounter a big hole which covers several dnode pages, we will try to seek data from index of page which is the first page of next dnode page, at most we could skip searching (ADDRS_PER_BLOCK - 1) pages. However it's still not efficient, because if our indirect/double-indirect pointer are NULL, there are no dnode page locate in the tree indirect/ double-indirect pointer point to, it's not necessary to search the whole region. This patch introduces get_next_page_offset to calculate next page offset based on current searching level and max searching level returned from get_dnode_of_data, with this, we could skip searching the entire area indirect or double-indirect node block is not exist. Signed-off-by: NChao Yu <chao2.yu@samsung.com> Signed-off-by: NJaegeuk Kim <jaegeuk@kernel.org>
-
由 Chao Yu 提交于
There are redundant pointer conversion in following call stack: - at position a, inode was been converted to f2fs_file_info. - at position b, f2fs_file_info was been converted to inode again. - truncate_blocks(inode,..) - fi = F2FS_I(inode) ---a - ADDRS_PER_PAGE(node_page, fi) - addrs_per_inode(fi) - inode = &fi->vfs_inode ---b - f2fs_has_inline_xattr(inode) - fi = F2FS_I(inode) - is_inode_flag_set(fi,..) In order to avoid unneeded conversion, alter ADDRS_PER_PAGE and addrs_per_inode to acept parameter with type of inode pointer. Signed-off-by: NChao Yu <chao2.yu@samsung.com> Signed-off-by: NJaegeuk Kim <jaegeuk@kernel.org>
-
由 Jaegeuk Kim 提交于
In write_begin, if storage supports stable_page, we don't need to wait for writeback to update its contents. This patch introduces to use wait_for_stable_page instead of wait_on_page_writeback. Signed-off-by: NJaegeuk Kim <jaegeuk@kernel.org>
-
由 Jaegeuk Kim 提交于
The sceanrio is: 1. create fully node blocks 2. flush node blocks 3. write inline_data for all the node blocks again 4. flush node blocks redundantly So, this patch tries to flush inline_data when flushing node blocks. Reviewed-by: NChao Yu <chao2.yu@samsung.com> Signed-off-by: NJaegeuk Kim <jaegeuk@kernel.org>
-
由 Chao Yu 提交于
This patch exports a new sysfs entry 'dirty_nat_ratio' to control threshold of dirty nat entries, if current ratio exceeds configured threshold, checkpoint will be triggered in f2fs_balance_fs_bg for flushing dirty nats. Signed-off-by: NChao Yu <chao2.yu@samsung.com> Signed-off-by: NJaegeuk Kim <jaegeuk@kernel.org>
-
- 12 1月, 2016 1 次提交
-
-
由 Jaegeuk Kim 提交于
This patch fixes wrong decision for avaliable_free_memory. The return valus is already set as false, so we should consider true condition below only. Signed-off-by: NJaegeuk Kim <jaegeuk@kernel.org>
-
- 09 1月, 2016 3 次提交
-
-
由 Jaegeuk Kim 提交于
Only when node page is newly dirtied, it needs to check whether we need to do f2fs_gc. Signed-off-by: NJaegeuk Kim <jaegeuk@kernel.org>
-
由 Chao Yu 提交于
There are duplicated code in between get_node_page and get_node_page_ra, introduce __get_node_page to includes common parts of these two, and export get_node_page and get_node_page_ra by reusing __get_node_page. Signed-off-by: NChao Yu <chao2.yu@samsung.com> Signed-off-by: NJaegeuk Kim <jaegeuk@kernel.org>
-
由 Chao Yu 提交于
Add node id check in ra_node_page and get_node_page_ra like get_node_page. Signed-off-by: NChao Yu <chao2.yu@samsung.com> Signed-off-by: NJaegeuk Kim <jaegeuk@kernel.org>
-