* 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/djbw/async_tx:
  async_tx: fix the bug in async_tx_run_dependencies

* git://git.infradead.org/~dwmw2/dwmw2-2.6.27:
  Revert "[ARM] use the new byteorder headers"
  Fix conditional export of kvh.h and a.out.h to userspace.
  [MTD] [NAND] tmio_nand: fix base address programming

* 'sh/for-2.6.27' of git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6:
  i2c: fix i2c-sh_mobile timing issues
  sh64: resume_kernel fix for kernel oops built with CONFIG_BKL_PREEMPT=y.
  sh: resume_kernel fix for kernel oops built with CONFIG_BKL_PREEMPT=y.
  sh: fix semtimedop syscall
  sh: update AP325RXA defconfig
  sh: update Migo-R defconfig
  sh: fix platform_resource_setup_memory() section mismatch
  sh: fix kexec entry point for crash kernels
  sh: crash kernel resource fix
  sh: fix ptrace_64.c:user_disable_single_step()
  sh64: re-add the __strnlen_user() prototype

* 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/v4l-dvb: (98 commits)
  V4L/DVB (8881): gspca: After 'while (retry--) {...}', retry will be -1 but not 0.
  V4L/DVB (8880): PATCH: Fix parents on some webcam drivers
  V4L/DVB (8877): b2c2 and bt8xx: udelay to mdelay
  V4L/DVB (8876): budget: udelay changed to mdelay
  V4L/DVB (8874): gspca: Adjust hstart for sn9c103/ov7630 and update usb-id's.
  V4L/DVB (8873): gspca: Bad image offset with rev012a of spca561 and adjust exposure.
  V4L/DVB (8872): gspca: Bad image format and offset with rev072a of spca561.
  V4L/DVB (8870): gspca: Fix dark room problem with sonixb.
  V4L/DVB (8869): gspca: Move the Sonix webcams with TAS5110C1B from sn9c102 to gspca.
  V4L/DVB (8868): gspca: Support for vga modes with sif sensors in sonixb.
  V4L/DVB (8844): dabusb_fpga_download(): fix a memory leak
  V4L/DVB (8843): tda10048_firmware_upload(): fix a memory leak
  V4L/DVB (8842): vivi_release(): fix use-after-free
  V4L/DVB (8840): dib0700: add basic support for Hauppauge Nova-TD-500 (84xxx)
  V4L/DVB (8839): dib0700: add comment to identify 35th USB id pair
  V4L/DVB (8837): dvb: fix I2C adapters name size
  V4L/DVB (8835): gspca: Same pixfmt as the sn9c102 driver and raw Bayer added in sonixb.
  V4L/DVB (8834): gspca: Have a bigger buffer for sn9c10x compressed images.
  V4L/DVB (8833): gspca: Cleanup the sonixb code.
  V4L/DVB (8832): gspca: Bad pixelformat of vc0321 webcams.
  ...

* 'core/debugobjects' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  debugobjects: fix lockdep warning

* 'release-2.6.27' of git://git.kernel.org/pub/scm/linux/kernel/git/ak/linux-acpi-2.6:
  acer-wmi: remove debugfs entries upon unloading
  ACPI: Avoid bogus timeout about SMbus check
  fujitsu-laptop: fix regression for P8010 in 2.6.27-rc
  ACPI: Make Len Brown the ACPI maintainer again
  ACPI: thinkpad-acpi: wan radio control is not experimental
  PNPACPI: ignore the producer/consumer bit for extended IRQ descriptors
  acpi: add checking for NULL early param
  ACPI: Fix typo in "Disable MWAIT via DMI on broken Compal board"
  ACPI: Fix now signed module parameter.
  ACPI: Change package length error to warning
  ACPI: Fix now signed module parameter.

This reverts commit 087d833e, which was
reported to break wireless at least in some combinations with 32bit user
space and a 64bit kernel.  Alex Williamnson bisected it to this commit.
Reported-and-bisected-by: NAlex Williamson <alex.williamson@hp.com>
Acked-by: NJohn W. Linville <linville@tuxdriver.com>
Cc: David Miller <davem@davemloft.net>
Cc: Jouni Malinen <jouni.malinen@atheros.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

This reverts commit ae82cbfc. It
needs the new byteorder headers to be exported to userspace, and
they aren't yet -- and probably shouldn't be, at this point in the
2.6.27 release cycle (or ever, for that matter).
Signed-off-by: NDavid Woodhouse <David.Woodhouse@intel.com>
Acked-by: NRussell King <rmk+kernel@arm.linux.org.uk>

Should clear the next pointer of the TX if we are sure that the
next TX (say NXT) will be submitted to the channel too. Overwise,
we break the chain of descriptors, because we lose the information
about the next descriptor to run. So next time, when invoke
async_tx_run_dependencies() with TX, it's TX->next will be NULL, and
NXT will be never submitted.

Cc: <stable@kernel.org>		[2.6.26]
Signed-off-by: NYuri Tikhonov <yur@emcraft.com>
Signed-off-by: NIlya Yanok <yanok@emcraft.com>
Signed-off-by: NDan Williams <dan.j.williams@intel.com>

Some architectures have moved the asm/ into arch/ and some have not.
This patch checks for a.out.h and kvh.h in both places before exporting
the corresponding file from linux/

[dwmw2: simplified a little]
Signed-off-by: NKhem Raj <raj.khem@gmail.com>
Signed-off-by: NDavid Woodhouse <David.Woodhouse@intel.com>

Fix offset of second word used for programming base address of memory
window. Also program tmio with offset of the FCR, not with physical
memory location.
Signed-off-by: NDmitry Baryshkov <dbaryshkov@gmail.com>
Cc: Ian Molton <spyro@f2s.com>
Signed-off-by: NDavid Woodhouse <David.Woodhouse@intel.com>

This patch teaches the i2c-sh_mobile driver to make use of wait irqs.
Without this patch only dte irqs are used which may lead to overruns
and cases of missing stop and extra bytes being read on the i2c bus.

Use of wait irqs forces the hardware to pause and wait until the cpu
is ready. Polling is also reworked in this patch to fix ms delay issues.

Verified with bus analyzer and tested on MigoR and AP325RXA boards.
Signed-off-by: NMagnus Damm <damm@igel.co.jp>
Signed-off-by: NPaul Mundt <lethal@linux-sh.org>

Follows the SH change.
Signed-off-by: NPaul Mundt <lethal@linux-sh.org>

This patch fixes a problem within the SH implementation of resume_kernel code,
that implements in assembly the bulk of preempt_schedule_irq function without
taking care of the extra code needed to handle the BKL preemptible.

The patch basically consists of removing this asm code and calling the common
C implementation (see kernel/sched.c) as other archs do.

Another change is the missing 'cli' macro invocation at the beginning of
the resume_kernel.
Signed-off-by: NGiuseppe Cavallaro <peppe.cavallaro@st.com>
Signed-off-by: NCarmelo Amoroso <carmelo.amoroso@st.com>
Signed-off-by: NPaul Mundt <lethal@linux-sh.org>

Signed-off-by: NLi Zefan <lizf@cn.fujitsu.com>
Signed-off-by: NJean-Francois Moine <moinejf@free.fr>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

While doing some testing using Luca Risolia's sonix driver I noticed that
the video device did not get ACL's set to allow access by locally logged in
users, nor does it show up as a video device in lshal, causing cheese to not
see it.

This turns out to be caused by all of Luca Risolia's drivers not setting
the parent member of the video_device struct. This patch fixes this.

Cc: Luca Risolia <luca.risolia@studio.unibo.it>
Signed-off-by: NHans de Goede <j.w.r.degoede@hhs.nl>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

b2c2-flexcop, dvb/bt8xx and video/bt8xx fails to build on ARM with:

__bad_udelay is specifically designed on ARM to fail when udelay is
called in a bad way.  arch/arm/include/asm/delay.h has this to say
about __bad_udelay:

/*
 * This function intentionally does not exist; if you see references to
 * it, it means that you're calling udelay() with an out of range value.
 *
 * With currently imposed limits, this means that we support a max delay
 * of 2000us. Further limits: HZ<=1000 and bogomips<=3355
 */
extern void __bad_udelay(void);

Solution is to replace udelay by a mdelay and udelay with value less than 2000
Signed-off-by: NThierry MERLE <thierry.merle@free.fr>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

budget.ko fails to build on ARM with:

ERROR: "__bad_udelay" [drivers/media/dvb/ttpci/budget.ko] undefined!
make[1]: *** [__modpost] Error 1

__bad_udelay is specifically designed on ARM to fail when udelay is
called in a bad way.  arch/arm/include/asm/delay.h has this to say
about __bad_udelay:

/*
 * This function intentionally does not exist; if you see references to
 * it, it means that you're calling udelay() with an out of range value.
 *
 * With currently imposed limits, this means that we support a max delay
 * of 2000us. Further limits: HZ<=1000 and bogomips<=3355
 */
extern void __bad_udelay(void);

Solution is to replace udelay by a mdelay and udelay with value less than 2000
Acked-by: NOliver Endriss <o.endriss@gmx.de>
Signed-off-by: NThierry MERLE <thierry.merle@free.fr>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

- Adjust hstart in ov7630 on sn9c103 initdata to shift bayer pattern, this is
 the same change as done for the other initdata tables in a previous patch.
- Assign usb-id's for the ov7630 + sn9c103 to gspca if gspca and sn9c102
  drivers are both enabled.
Signed-off-by: NHans de Goede <j.w.r.degoede@hhs.nl>
Signed-off-by: NJean-Francois Moine <moinejf@free.fr>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

-Make raw bayer header size change from 20 to 16 affect rev072a only, my 2
 rev012a cams both have a header size of 20
-While testing this I also tested the new exposure setting (good work on
 finding the register JF), and after quite a bit of testing have found out the
 exact meaning of the register, this patch modifies setexposure to control
 the exposure over a much wider range.
Signed-off-by: NHans de Goede <j.w.r.degoede@hhs.nl>
Signed-off-by: NJean-Francois Moine <moinejf@free.fr>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

- have 2 pixfmt tables
- offset of Bayer frames at 16 instead of 20.
Signed-off-by: NJean-Francois Moine <moinejf@free.fr>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

When using the sonixb driver in a dark room and given that the autoexposure
algorithm starts with a setting most suitable for daylight, the picture
produced by the cam may actually be 100% black leading to a avg_lum value of 0,
so an avg_lum value of 0 does not always signal an exposure settings change
(which it normally does). This patch adds a check for the really black image
case and stops dropping all frames as invalid in this case.
Signed-off-by: NHans de Goede <j.w.r.degoede@hhs.nl>
Signed-off-by: NJean-Francois Moine <moinejf@free.fr>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

This patch makes gspca claim the USB-ID for sn9c101/2 cams with a TAS5110C1B
sensor even if both gspca and sn9c102 are enabled, as these cams are much
better supported under gspca (and extensively tested with gspca).
It also removes an usb-id from sn9c102 for one more unsupported bridge
sensor combo.
Signed-off-by: NHans de Goede <j.w.r.degoede@hhs.nl>
Signed-off-by: NJean-Francois Moine <moinejf@free.fr>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

- Add documentation for some known registers
- Add support for vga modes (320x240, 160x120) for sif sensors
- Remove F_RAW sensor flag raw mode should work on any sensor as its a bridge
   only thing and keeping the flag was becoming awkward.
- Fixup ov6650 and pas106 auto exposure window settings
Signed-off-by: NHans de Goede <j.w.r.degoede@hhs.nl>
Signed-off-by: NJean-Francois Moine <moinejf@free.fr>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

We should've set refcount on the root sysctl table; otherwise we'll blow
up the first time we get down to zero dynamically registered sysctl
tables.
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
Tested-by: NJames Bottomley <James.Bottomley@HansenPartnership.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The exit function neglects to remove debugfs entries, leading to a BUG
on reload.

[akpm@linux-foundation.org: cleanups]
Signed-off-by: NRuss Dill <Russ.Dill@gmail.com>
Acked-by: NCarlos Corbacho <carlos@strangeworlds.co.uk>
Cc: Andi Kleen <ak@linux.intel.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NAndi Kleen <ak@linux.intel.com>

In the function of wait_transaction_complete when the timeout happens,
OS will try to check the status of SMbus again. If the status is what OS
expected, it will be regarded as the bogus timeout. Otherwise it will be
treated as ETIME.

http://bugzilla.kernel.org/show_bug.cgi?id=10483Signed-off-by: NZhao Yakui <yakui.zhao@intel.com>
tested-by    : Oldřich Jedlička < <oldium.pro@seznam.cz>
Signed-off-by: NAndi Kleen <ak@linux.intel.com>

The following patch (based on a patch from Stephen Gildea) fixes a
regression with the LCD brightness keys on Fujitsu P8010 laptops which was
observed with the 2.6.27-rc series (basically they stopped working due to
changes within the fujitsu-laptop and video modules).  Please apply to
2.6.27-rc and acpi git.

A more complete solution for this laptop will be included in an upcoming
patch, hopefully for 2.6.28.  In the meantime this restores most
functionality for P8010 users.
Signed-off-by: NStephen Gildea <stepheng+fujitsu-laptop@gildea.com>
Signed-off-by: NJonathan Woithe <jwoithe@physics.adelaide.edu.au>
Signed-off-by: NAndi Kleen <ak@linux.intel.com>

Len is back!
Signed-off-by: NAndi Kleen <ak@linux.intel.com>

Commit 88452565 ("PCI: clean up resource
alignment management") changed the resource handling to mark how a
resource was aligned on a per-resource basis.

Thus, instead of looking at the resource number to determine whether it
was a bridge resource or a regular resource (they have different
alignment rules), we should just ask the resource for its alignment
directly.

The reason this broke only cardbus resources was that for the other
types of resources, the old way of deciding alignment actually still
happened to work.  But CardBus bridge resources had been changed by
commit 934b7024 ("Fix cardbus resource
allocation") to look more like regular resources than PCI bridge
resources from an alignment handling standpoint.
Reported-and-tested-by: NAndrew Morton <akpm@linux-foundation.org>
Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru>
Cc: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

When calibration against PIT fails, the warning that we print is misleading.
In a virtualized environment the VM may get descheduled while calibration
or, the check in PIT calibration may fail due to other virtualization
overheads.

The warning message explicitly assumes that calibration failed due to SMI's
which may not be the case. Change that to something proper.
Signed-off-by: NAlok N Kataria <akataria@vmware.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Anonymous mappings should ignore offset but shared anonymous mapping
forgot to clear it and makes the following legit test program trigger
SIGBUS.

 #include <sys/mman.h>
 #include <stdio.h>
 #include <errno.h>

 #define PAGE_SIZE	4096

 int main(void)
 {
	 char *p;
	 int i;

	 p = mmap(NULL, 2 * PAGE_SIZE, PROT_READ|PROT_WRITE,
		  MAP_SHARED|MAP_ANONYMOUS, -1, PAGE_SIZE);
	 if (p == MAP_FAILED) {
		 perror("mmap");
		 return 1;
	 }

	 for (i = 0; i < 2; i++) {
		 printf("page %d\n", i);
		 p[i * 4096] = i;
	 }
	 return 0;
 }

Fix it.
Signed-off-by: NTejun Heo <tj@kernel.org>
Acked-by: NHugh Dickins <hugh@veritas.com>
Acked-by: NKOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/security-testing-2.6

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/security-testing-2.6:
  SELinux: memory leak in security_context_to_sid_core

* 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc:
  powerpc: Fix for getting CPU number in power_save_ppc32_restore()
  powerpc: Fix build error with 64K pages and !hugetlbfs
  powerpc: Work around gcc's -fno-omit-frame-pointer bug
  powerpc: Make sure _etext is after all kernel text
  powerpc: Only make kernel text pages of linear mapping executable
  powerpc: Fix uninitialised variable in VSX alignment code

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6:
  bnx2x: Accessing un-mapped page
  ath9k: Fix TX control flag use for no ACK and RTS/CTS
  ath9k: Fix TX status reporting
  iwlwifi: fix STATUS_EXIT_PENDING is not set on pci_remove
  iwlwifi: call apm stop on exit
  iwlwifi: fix Tx cmd memory allocation failure handling
  iwlwifi: fix rx_chain computation
  iwlwifi: fix station mimo power save values
  iwlwifi: remove false rxon if rx chain changes
  iwlwifi: fix hidden ssid discovery in passive channels
  iwlwifi: W/A for the TSF correction in IBSS
  netxen: Remove workaround for chipset quirk
  pcnet-cs, axnet_cs: add new IDs, remove dup ID with less info
  ixgbe: initialize interrupt throttle rate
  net/usb/pegasus: avoid hundreds of diagnostics
  tipc: Don't use structure names which easily globally conflict.

Fix a bug and a philosophical decision about who handles errors.

security_context_to_sid_core() was leaking a context in the common case.
This was causing problems on fedora systems which recently have started
making extensive use of this function.

In discussion it was decided that if string_to_context_struct() had an
error it was its own responsibility to clean up any mess it created
along the way.
Signed-off-by: NEric Paris <eparis@redhat.com>
Acked-by: NStephen Smalley <sds@tycho.nsa.gov>
Signed-off-by: NJames Morris <jmorris@namei.org>