Skip to content

K
Kernel

openeuler / Kernel
大约 1 年 前同步成功

通知 6
Star 0
Fork 0
K
Kernel
提交 b693ffe6 编写于 作者: L Linus Torvalds
浏览文件
操作

Merge branch 'sh/for-2.6.27' of git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6 

* 'sh/for-2.6.27' of git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6:
  i2c: fix i2c-sh_mobile timing issues
  sh64: resume_kernel fix for kernel oops built with CONFIG_BKL_PREEMPT=y.
  sh: resume_kernel fix for kernel oops built with CONFIG_BKL_PREEMPT=y.
  sh: fix semtimedop syscall
  sh: update AP325RXA defconfig
  sh: update Migo-R defconfig
  sh: fix platform_resource_setup_memory() section mismatch
  sh: fix kexec entry point for crash kernels
  sh: crash kernel resource fix
  sh: fix ptrace_64.c:user_disable_single_step()
  sh64: re-add the __strnlen_user() prototype
上级 14408c4f 4eb00c9f
隐藏空白更改
内联 并排
Showing with 250 addition and 125 deletion
arch/sh/configs/ap325rxa_defconfig
浏览文件 @ b693ffe6
#
# Automatically generated make config: don't edit
# Linux kernel version: 2.6.26
# Wed Jul 30 01:18:59 2008
# Linux kernel version: 2.6.27-rc4
# Tue Aug 26 14:21:17 2008
#
CONFIG_SUPERH=y
CONFIG_SUPERH32=y
......@@ -11,6 +11,7 @@ CONFIG_GENERIC_BUG=y
CONFIG_GENERIC_FIND_NEXT_BIT=y
CONFIG_GENERIC_HWEIGHT=y
CONFIG_GENERIC_HARDIRQS=y
CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_GENERIC_TIME=y
......@@ -20,7 +21,6 @@ CONFIG_LOCKDEP_SUPPORT=y
# CONFIG_ARCH_HAS_ILOG2_U32 is not set
# CONFIG_ARCH_HAS_ILOG2_U64 is not set
CONFIG_ARCH_NO_VIRT_TO_BUS=y
CONFIG_ARCH_SUPPORTS_AOUT=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
#
......@@ -58,7 +58,6 @@ CONFIG_SYSCTL=y
CONFIG_EMBEDDED=y
CONFIG_UID16=y
CONFIG_SYSCTL_SYSCALL=y
CONFIG_SYSCTL_SYSCALL_CHECK=y
# CONFIG_KALLSYMS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
......@@ -89,6 +88,7 @@ CONFIG_HAVE_OPROFILE=y
# CONFIG_USE_GENERIC_SMP_HELPERS is not set
CONFIG_HAVE_CLK=y
CONFIG_PROC_PAGE_MONITOR=y
CONFIG_HAVE_GENERIC_DMA_COHERENT=y
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
# CONFIG_TINY_SHMEM is not set
......@@ -261,9 +261,10 @@ CONFIG_HZ_250=y
# CONFIG_HZ_300 is not set
# CONFIG_HZ_1000 is not set
CONFIG_HZ=250
# CONFIG_SCHED_HRTICK is not set
CONFIG_SCHED_HRTICK=y
# CONFIG_KEXEC is not set
# CONFIG_CRASH_DUMP is not set
CONFIG_SECCOMP=y
# CONFIG_PREEMPT_NONE is not set
# CONFIG_PREEMPT_VOLUNTARY is not set
CONFIG_PREEMPT=y
......@@ -289,10 +290,6 @@ CONFIG_CMDLINE="console=tty1 console=ttySC5,38400 root=/dev/nfs ip=dhcp"
#
CONFIG_BINFMT_ELF=y
# CONFIG_BINFMT_MISC is not set
#
# Networking
#
CONFIG_NET=y
#
......@@ -647,6 +644,7 @@ CONFIG_SSB_POSSIBLE=y
# CONFIG_MFD_CORE is not set
# CONFIG_MFD_SM501 is not set
# CONFIG_HTC_PASIC3 is not set
# CONFIG_MFD_TMIO is not set
#
# Multimedia devices
......@@ -690,7 +688,10 @@ CONFIG_DUMMY_CONSOLE=y
# CONFIG_ACCESSIBILITY is not set
# CONFIG_RTC_CLASS is not set
# CONFIG_DMADEVICES is not set
# CONFIG_UIO is not set
CONFIG_UIO=y
# CONFIG_UIO_PDRV is not set
CONFIG_UIO_PDRV_GENIRQ=y
# CONFIG_UIO_SMX is not set
#
# File systems
......@@ -854,6 +855,7 @@ CONFIG_FRAME_WARN=1024
# CONFIG_DEBUG_KERNEL is not set
# CONFIG_DEBUG_BUGVERBOSE is not set
# CONFIG_DEBUG_MEMORY_INIT is not set
CONFIG_SYSCTL_SYSCALL_CHECK=y
# CONFIG_SAMPLES is not set
# CONFIG_SH_STANDARD_BIOS is not set
# CONFIG_EARLY_SCIF_CONSOLE is not set
......
arch/sh/configs/migor_defconfig
浏览文件 @ b693ffe6
#
# Automatically generated make config: don't edit
# Linux kernel version: 2.6.26
# Wed Jul 30 01:44:41 2008
# Linux kernel version: 2.6.27-rc4
# Tue Aug 26 14:18:17 2008
#
CONFIG_SUPERH=y
CONFIG_SUPERH32=y
......@@ -11,6 +11,7 @@ CONFIG_GENERIC_BUG=y
CONFIG_GENERIC_FIND_NEXT_BIT=y
CONFIG_GENERIC_HWEIGHT=y
CONFIG_GENERIC_HARDIRQS=y
CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_GENERIC_TIME=y
......@@ -21,7 +22,6 @@ CONFIG_LOCKDEP_SUPPORT=y
# CONFIG_ARCH_HAS_ILOG2_U32 is not set
# CONFIG_ARCH_HAS_ILOG2_U64 is not set
CONFIG_ARCH_NO_VIRT_TO_BUS=y
CONFIG_ARCH_SUPPORTS_AOUT=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
#
......@@ -87,6 +87,7 @@ CONFIG_HAVE_OPROFILE=y
# CONFIG_USE_GENERIC_SMP_HELPERS is not set
CONFIG_HAVE_CLK=y
CONFIG_PROC_PAGE_MONITOR=y
CONFIG_HAVE_GENERIC_DMA_COHERENT=y
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
# CONFIG_TINY_SHMEM is not set
......@@ -270,6 +271,7 @@ CONFIG_HZ=250
# CONFIG_SCHED_HRTICK is not set
# CONFIG_KEXEC is not set
# CONFIG_CRASH_DUMP is not set
CONFIG_SECCOMP=y
CONFIG_PREEMPT_NONE=y
# CONFIG_PREEMPT_VOLUNTARY is not set
# CONFIG_PREEMPT is not set
......@@ -294,10 +296,6 @@ CONFIG_CMDLINE="console=ttySC0,115200 earlyprintk=serial ip=on"
#
CONFIG_BINFMT_ELF=y
# CONFIG_BINFMT_MISC is not set
#
# Networking
#
CONFIG_NET=y
#
......@@ -649,6 +647,7 @@ CONFIG_HW_RANDOM=y
CONFIG_I2C=y
CONFIG_I2C_BOARDINFO=y
# CONFIG_I2C_CHARDEV is not set
CONFIG_I2C_HELPER_AUTO=y
#
# I2C Hardware Bus support
......@@ -709,6 +708,7 @@ CONFIG_SSB_POSSIBLE=y
# CONFIG_MFD_CORE is not set
# CONFIG_MFD_SM501 is not set
# CONFIG_HTC_PASIC3 is not set
# CONFIG_MFD_TMIO is not set
#
# Multimedia devices
......@@ -755,6 +755,8 @@ CONFIG_USB_ARCH_HAS_HCD=y
# CONFIG_USB is not set
# CONFIG_USB_OTG_WHITELIST is not set
# CONFIG_USB_OTG_BLACKLIST_HUB is not set
# CONFIG_USB_MUSB_HDRC is not set
# CONFIG_USB_GADGET_MUSB_HDRC is not set
#
# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
......@@ -842,7 +844,10 @@ CONFIG_RTC_DRV_RS5C372=y
#
CONFIG_RTC_DRV_SH=y
# CONFIG_DMADEVICES is not set
# CONFIG_UIO is not set
CONFIG_UIO=y
# CONFIG_UIO_PDRV is not set
CONFIG_UIO_PDRV_GENIRQ=y
# CONFIG_UIO_SMX is not set
#
# File systems
......
arch/sh/include/asm/uaccess_64.h
浏览文件 @ b693ffe6
......@@ -76,4 +76,6 @@ extern long __put_user_asm_l(void *, long);
extern long __put_user_asm_q(void *, long);
extern void __put_user_unknown(void);
extern long __strnlen_user(const char *__s, long __n);
#endif /* __ASM_SH_UACCESS_64_H */
arch/sh/kernel/cpu/sh5/entry.S
浏览文件 @ b693ffe6
......@@ -2,7 +2,7 @@
* arch/sh/kernel/cpu/sh5/entry.S
*
* Copyright (C) 2000, 2001 Paolo Alberelli
* Copyright (C) 2004 - 2007 Paul Mundt
* Copyright (C) 2004 - 2008 Paul Mundt
* Copyright (C) 2003, 2004 Richard Curnow
*
* This file is subject to the terms and conditions of the GNU General Public
......@@ -923,6 +923,8 @@ ret_from_exception:
blink tr0, ZERO
resume_kernel:
CLI()
pta restore_all, tr0
getcon KCR0, r6
......@@ -939,19 +941,11 @@ need_resched:
andi r7, 0xf0, r7
bne r7, ZERO, tr0
movi ((PREEMPT_ACTIVE >> 16) & 65535), r8
shori (PREEMPT_ACTIVE & 65535), r8
st.l r6, TI_PRE_COUNT, r8
STI()
movi schedule, r7
movi preempt_schedule_irq, r7
ori r7, 1, r7
ptabs r7, tr1
blink tr1, LINK
st.l r6, TI_PRE_COUNT, ZERO
CLI()
pta need_resched, tr1
blink tr1, ZERO
#endif
......
arch/sh/kernel/entry-common.S
浏览文件 @ b693ffe6
......@@ -92,6 +92,7 @@ ENTRY(ret_from_irq)
bra resume_userspace
nop
ENTRY(resume_kernel)
cli
mov.l @(TI_PRE_COUNT,r8), r0 ! current_thread_info->preempt_count
tst r0, r0
bf noresched
......@@ -105,28 +106,9 @@ need_resched:
and #0xf0, r0 ! interrupts off (exception path)?
cmp/eq #0xf0, r0
bt noresched
mov.l 1f, r0
mov.l r0, @(TI_PRE_COUNT,r8)
#ifdef CONFIG_TRACE_IRQFLAGS
mov.l 3f, r0
jsr @r0
nop
#endif
sti
mov.l 2f, r0
jsr @r0
nop
mov #0, r0
mov.l r0, @(TI_PRE_COUNT,r8)
cli
#ifdef CONFIG_TRACE_IRQFLAGS
mov.l 4f, r0
jsr @r0
jsr @r0 ! call preempt_schedule_irq
nop
#endif
bra need_resched
nop
......@@ -137,10 +119,7 @@ noresched:
.align 2
1: .long PREEMPT_ACTIVE
2: .long schedule
#ifdef CONFIG_TRACE_IRQFLAGS
3: .long trace_hardirqs_on
4: .long trace_hardirqs_off
#endif
3: .long preempt_schedule_irq
#endif
ENTRY(resume_userspace)
......
arch/sh/kernel/machine_kexec.c
浏览文件 @ b693ffe6
......@@ -102,7 +102,7 @@ void machine_kexec(struct kimage *image)
/* now call it */
rnk = (relocate_new_kernel_t) reboot_code_buffer;
(*rnk)(page_list, reboot_code_buffer, image->start, vbr_reg);
(*rnk)(page_list, reboot_code_buffer, P2SEGADDR(image->start), vbr_reg);
}
void arch_crash_save_vmcoreinfo(void)
......
arch/sh/kernel/ptrace_64.c
浏览文件 @ b693ffe6
......@@ -131,6 +131,8 @@ void user_enable_single_step(struct task_struct *child)
void user_disable_single_step(struct task_struct *child)
{
struct pt_regs *regs = child->thread.uregs;
regs->sr &= ~SR_SSTEP;
}
......
arch/sh/kernel/setup.c
浏览文件 @ b693ffe6
......@@ -171,6 +171,7 @@ static void __init reserve_crashkernel(void)
(unsigned long)(free_mem >> 20));
crashk_res.start = crash_base;
crashk_res.end = crash_base + crash_size - 1;
insert_resource(&iomem_resource, &crashk_res);
}
}
#else
......@@ -204,11 +205,6 @@ void __init __add_active_range(unsigned int nid, unsigned long start_pfn,
request_resource(res, &data_resource);
request_resource(res, &bss_resource);
#ifdef CONFIG_KEXEC
if (crashk_res.start != crashk_res.end)
request_resource(res, &crashk_res);
#endif
add_active_range(nid, start_pfn, end_pfn);
}
......
arch/sh/kernel/sys_sh.c
浏览文件 @ b693ffe6
......@@ -170,7 +170,7 @@ asmlinkage int sys_ipc(uint call, int first, int second,
version = call >> 16; /* hack for backward compatibility */
call &= 0xffff;
if (call <= SEMCTL)
if (call <= SEMTIMEDOP)
switch (call) {
case SEMOP:
return sys_semtimedop(first,
......
arch/sh/mm/consistent.c
浏览文件 @ b693ffe6
......@@ -101,7 +101,7 @@ static int __init memchunk_setup(char *str)
}
__setup("memchunk.", memchunk_setup);
static void memchunk_cmdline_override(char *name, unsigned long *sizep)
static void __init memchunk_cmdline_override(char *name, unsigned long *sizep)
{
char *p = boot_command_line;
int k = strlen(name);
......@@ -118,8 +118,8 @@ static void memchunk_cmdline_override(char *name, unsigned long *sizep)
}
}
int platform_resource_setup_memory(struct platform_device *pdev,
char *name, unsigned long memsize)
int __init platform_resource_setup_memory(struct platform_device *pdev,
char *name, unsigned long memsize)
{
struct resource *r;
dma_addr_t dma_handle;
......
drivers/i2c/busses/i2c-sh_mobile.c
浏览文件 @ b693ffe6
......@@ -31,13 +31,84 @@
#include <linux/clk.h>
#include <linux/io.h>
/* Transmit operation: */
/* */
/* 0 byte transmit */
/* BUS: S A8 ACK P */
/* IRQ: DTE WAIT */
/* ICIC: */
/* ICCR: 0x94 0x90 */
/* ICDR: A8 */
/* */
/* 1 byte transmit */
/* BUS: S A8 ACK D8(1) ACK P */
/* IRQ: DTE WAIT WAIT */
/* ICIC: -DTE */
/* ICCR: 0x94 0x90 */
/* ICDR: A8 D8(1) */
/* */
/* 2 byte transmit */
/* BUS: S A8 ACK D8(1) ACK D8(2) ACK P */
/* IRQ: DTE WAIT WAIT WAIT */
/* ICIC: -DTE */
/* ICCR: 0x94 0x90 */
/* ICDR: A8 D8(1) D8(2) */
/* */
/* 3 bytes or more, +---------+ gets repeated */
/* */
/* */
/* Receive operation: */
/* */
/* 0 byte receive - not supported since slave may hold SDA low */
/* */
/* 1 byte receive [TX] | [RX] */
/* BUS: S A8 ACK | D8(1) ACK P */
/* IRQ: DTE WAIT | WAIT DTE */
/* ICIC: -DTE | +DTE */
/* ICCR: 0x94 0x81 | 0xc0 */
/* ICDR: A8 | D8(1) */
/* */
/* 2 byte receive [TX]| [RX] */
/* BUS: S A8 ACK | D8(1) ACK D8(2) ACK P */
/* IRQ: DTE WAIT | WAIT WAIT DTE */
/* ICIC: -DTE | +DTE */
/* ICCR: 0x94 0x81 | 0xc0 */
/* ICDR: A8 | D8(1) D8(2) */
/* */
/* 3 byte receive [TX] | [RX] */
/* BUS: S A8 ACK | D8(1) ACK D8(2) ACK D8(3) ACK P */
/* IRQ: DTE WAIT | WAIT WAIT WAIT DTE */
/* ICIC: -DTE | +DTE */
/* ICCR: 0x94 0x81 | 0xc0 */
/* ICDR: A8 | D8(1) D8(2) D8(3) */
/* */
/* 4 bytes or more, this part is repeated +---------+ */
/* */
/* */
/* Interrupt order and BUSY flag */
/* ___ _ */
/* SDA ___\___XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXAAAAAAAAA___/ */
/* SCL \_/1\_/2\_/3\_/4\_/5\_/6\_/7\_/8\___/9\_____/ */
/* */
/* S D7 D6 D5 D4 D3 D2 D1 D0 P */
/* ___ */
/* WAIT IRQ ________________________________/ \___________ */
/* TACK IRQ ____________________________________/ \_______ */
/* DTE IRQ __________________________________________/ \_ */
/* AL IRQ XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX */
/* _______________________________________________ */
/* BUSY __/ \_ */
/* */
enum sh_mobile_i2c_op {
OP_START = 0,
OP_TX_ONLY,
OP_TX_FIRST,
OP_TX,
OP_TX_STOP,
OP_TX_TO_RX,
OP_RX_ONLY,
OP_RX,
OP_RX_STOP,
OP_RX_STOP_DATA,
};
struct sh_mobile_i2c_data {
......@@ -127,25 +198,34 @@ static unsigned char i2c_op(struct sh_mobile_i2c_data *pd,
spin_lock_irqsave(&pd->lock, flags);
switch (op) {
case OP_START:
case OP_START: /* issue start and trigger DTE interrupt */
iowrite8(0x94, ICCR(pd));
break;
case OP_TX_ONLY:
case OP_TX_FIRST: /* disable DTE interrupt and write data */
iowrite8(ICIC_WAITE | ICIC_ALE | ICIC_TACKE, ICIC(pd));
iowrite8(data, ICDR(pd));
break;
case OP_TX_STOP:
case OP_TX: /* write data */
iowrite8(data, ICDR(pd));
iowrite8(0x90, ICCR(pd));
iowrite8(ICIC_ALE | ICIC_TACKE, ICIC(pd));
break;
case OP_TX_TO_RX:
case OP_TX_STOP: /* write data and issue a stop afterwards */
iowrite8(data, ICDR(pd));
iowrite8(0x90, ICCR(pd));
break;
case OP_TX_TO_RX: /* select read mode */
iowrite8(0x81, ICCR(pd));
break;
case OP_RX_ONLY:
case OP_RX: /* just read data */
ret = ioread8(ICDR(pd));
break;
case OP_RX_STOP:
case OP_RX_STOP: /* enable DTE interrupt, issue stop */
iowrite8(ICIC_DTEE | ICIC_WAITE | ICIC_ALE | ICIC_TACKE,
ICIC(pd));
iowrite8(0xc0, ICCR(pd));
break;
case OP_RX_STOP_DATA: /* enable DTE interrupt, read data, issue stop */
iowrite8(ICIC_DTEE | ICIC_WAITE | ICIC_ALE | ICIC_TACKE,
ICIC(pd));
ret = ioread8(ICDR(pd));
iowrite8(0xc0, ICCR(pd));
break;
......@@ -157,58 +237,120 @@ static unsigned char i2c_op(struct sh_mobile_i2c_data *pd,
return ret;
}
static int sh_mobile_i2c_is_first_byte(struct sh_mobile_i2c_data *pd)
{
if (pd->pos == -1)
return 1;
return 0;
}
static int sh_mobile_i2c_is_last_byte(struct sh_mobile_i2c_data *pd)
{
if (pd->pos == (pd->msg->len - 1))
return 1;
return 0;
}
static void sh_mobile_i2c_get_data(struct sh_mobile_i2c_data *pd,
unsigned char *buf)
{
switch (pd->pos) {
case -1:
*buf = (pd->msg->addr & 0x7f) << 1;
*buf |= (pd->msg->flags & I2C_M_RD) ? 1 : 0;
break;
default:
*buf = pd->msg->buf[pd->pos];
}
}
static int sh_mobile_i2c_isr_tx(struct sh_mobile_i2c_data *pd)
{
unsigned char data;
if (pd->pos == pd->msg->len)
return 1;
sh_mobile_i2c_get_data(pd, &data);
if (sh_mobile_i2c_is_last_byte(pd))
i2c_op(pd, OP_TX_STOP, data);
else if (sh_mobile_i2c_is_first_byte(pd))
i2c_op(pd, OP_TX_FIRST, data);
else
i2c_op(pd, OP_TX, data);
pd->pos++;
return 0;
}
static int sh_mobile_i2c_isr_rx(struct sh_mobile_i2c_data *pd)
{
unsigned char data;
int real_pos;
do {
if (pd->pos <= -1) {
sh_mobile_i2c_get_data(pd, &data);
if (sh_mobile_i2c_is_first_byte(pd))
i2c_op(pd, OP_TX_FIRST, data);
else
i2c_op(pd, OP_TX, data);
break;
}
if (pd->pos == 0) {
i2c_op(pd, OP_TX_TO_RX, 0);
break;
}
real_pos = pd->pos - 2;
if (pd->pos == pd->msg->len) {
if (real_pos < 0) {
i2c_op(pd, OP_RX_STOP, 0);
break;
}
data = i2c_op(pd, OP_RX_STOP_DATA, 0);
} else
data = i2c_op(pd, OP_RX, 0);
pd->msg->buf[real_pos] = data;
} while (0);
pd->pos++;
return pd->pos == (pd->msg->len + 2);
}
static irqreturn_t sh_mobile_i2c_isr(int irq, void *dev_id)
{
struct platform_device *dev = dev_id;
struct sh_mobile_i2c_data *pd = platform_get_drvdata(dev);
struct i2c_msg *msg = pd->msg;
unsigned char data, sr;
int wakeup = 0;
unsigned char sr;
int wakeup;
sr = ioread8(ICSR(pd));
pd->sr |= sr;
pd->sr |= sr; /* remember state */
dev_dbg(pd->dev, "i2c_isr 0x%02x 0x%02x %s %d %d!\n", sr, pd->sr,
(msg->flags & I2C_M_RD) ? "read" : "write",
pd->pos, msg->len);
(pd->msg->flags & I2C_M_RD) ? "read" : "write",
pd->pos, pd->msg->len);
if (sr & (ICSR_AL | ICSR_TACK)) {
iowrite8(0, ICIC(pd)); /* disable interrupts */
wakeup = 1;
goto do_wakeup;
}
/* don't interrupt transaction - continue to issue stop */
iowrite8(sr & ~(ICSR_AL | ICSR_TACK), ICSR(pd));
wakeup = 0;
} else if (pd->msg->flags & I2C_M_RD)
wakeup = sh_mobile_i2c_isr_rx(pd);
else
wakeup = sh_mobile_i2c_isr_tx(pd);
if (pd->pos == msg->len) {
i2c_op(pd, OP_RX_ONLY, 0);
wakeup = 1;
goto do_wakeup;
}
if (sr & ICSR_WAIT) /* TODO: add delay here to support slow acks */
iowrite8(sr & ~ICSR_WAIT, ICSR(pd));
if (pd->pos == -1) {
data = (msg->addr & 0x7f) << 1;
data |= (msg->flags & I2C_M_RD) ? 1 : 0;
} else
data = msg->buf[pd->pos];
if ((pd->pos == -1) || !(msg->flags & I2C_M_RD)) {
if (msg->flags & I2C_M_RD)
i2c_op(pd, OP_TX_TO_RX, data);
else if (pd->pos == (msg->len - 1)) {
i2c_op(pd, OP_TX_STOP, data);
wakeup = 1;
} else
i2c_op(pd, OP_TX_ONLY, data);
} else {
if (pd->pos == (msg->len - 1))
data = i2c_op(pd, OP_RX_STOP, 0);
else
data = i2c_op(pd, OP_RX_ONLY, 0);
msg->buf[pd->pos] = data;
}
pd->pos++;
do_wakeup:
if (wakeup) {
pd->sr |= SW_DONE;
wake_up(&pd->wait);
......@@ -219,6 +361,11 @@ static irqreturn_t sh_mobile_i2c_isr(int irq, void *dev_id)
static int start_ch(struct sh_mobile_i2c_data *pd, struct i2c_msg *usr_msg)
{
if (usr_msg->len == 0 && (usr_msg->flags & I2C_M_RD)) {
dev_err(pd->dev, "Unsupported zero length i2c read\n");
return -EIO;
}
/* Initialize channel registers */
iowrite8(ioread8(ICCR(pd)) & ~ICCR_ICE, ICCR(pd));
......@@ -233,9 +380,8 @@ static int start_ch(struct sh_mobile_i2c_data *pd, struct i2c_msg *usr_msg)
pd->pos = -1;
pd->sr = 0;
/* Enable all interrupts except wait */
iowrite8(ioread8(ICIC(pd)) | ICIC_ALE | ICIC_TACKE | ICIC_DTEE,
ICIC(pd));
/* Enable all interrupts to begin with */
iowrite8(ICIC_WAITE | ICIC_ALE | ICIC_TACKE | ICIC_DTEE, ICIC(pd));
return 0;
}
......@@ -268,25 +414,18 @@ static int sh_mobile_i2c_xfer(struct i2c_adapter *adapter,
if (!k)
dev_err(pd->dev, "Transfer request timed out\n");
retry_count = 10;
retry_count = 1000;
again:
val = ioread8(ICSR(pd));
dev_dbg(pd->dev, "val 0x%02x pd->sr 0x%02x\n", val, pd->sr);
if ((val | pd->sr) & (ICSR_TACK | ICSR_AL)) {
err = -EIO;
break;
}
/* the interrupt handler may wake us up before the
* transfer is finished, so poll the hardware
* until we're done.
*/
if (!(!(val & ICSR_BUSY) && (val & ICSR_SCLM) &&
(val & ICSR_SDAM))) {
msleep(1);
if (val & ICSR_BUSY) {
udelay(10);
if (retry_count--)
goto again;
......@@ -294,6 +433,12 @@ static int sh_mobile_i2c_xfer(struct i2c_adapter *adapter,
dev_err(pd->dev, "Polling timed out\n");
break;
}
/* handle missing acknowledge and arbitration lost */
if ((val | pd->sr) & (ICSR_TACK | ICSR_AL)) {
err = -EIO;
break;
}
}
deactivate_ch(pd);
......
Markdown is supported
0% 或 .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑！
想要评论请 注册 或