The ksz9477 and lan937x has few difference in the static and reserved
table register 0x041C. For the ksz9477 if the bit 0 is 1 - read
operation and 0 - write operation. But for lan937x bit 1:0 used for
selecting the read/write operation, 01 - write and 10 - read.
To use ksz9477 mdb add/del and enable_stp_addr for the lan937x, masks &
shifts are introduced for ksz9477 & lan937x in ksz_common.c. Then
updated the function with masks & shifts based on the switch instead of
hard coding it.
Signed-off-by: NArun Ramadoss <arun.ramadoss@microchip.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This switch is calculating tx/rx_bytes for all packets including pause.
So, include rx/tx_pause counter to rx/tx_packets to make tx/rx_bytes fit
to rx/tx_packets.

Link: https://lore.kernel.org/all/20220624220317.ckhx6z7cmzegvoqi@skbuf/Signed-off-by: NOleksij Rempel <o.rempel@pengutronix.de>
Reviewed-by: NVladimir Oltean <olteanv@gmail.com>
Reviewed-by: NFlorian Fainelli <f.fainelli@gmail.com>
Signed-off-by: NJakub Kicinski <kuba@kernel.org>

Add support for pause specific stats.

Tested on ksz9477.
Signed-off-by: NOleksij Rempel <o.rempel@pengutronix.de>
Reviewed-by: NVladimir Oltean <olteanv@gmail.com>
Reviewed-by: NFlorian Fainelli <f.fainelli@gmail.com>
Signed-off-by: NJakub Kicinski <kuba@kernel.org>

This patch moves the broadcast ctrl, multicast ctrl and start control
registers from ksz_chip_dat to ksz_chip_reg.
Signed-off-by: NArun Ramadoss <arun.ramadoss@microchip.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This patch moves the stp_ctrl_reg from the ksz_chip_data to ksz_chip_reg
structure.
Signed-off-by: NArun Ramadoss <arun.ramadoss@microchip.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The register size for the ksz8 switches is u8 and for ksz9477 series is
u16.  To have common struct for ksz series switches the size of reg is
increased from u8 to u16.
Signed-off-by: NArun Ramadoss <arun.ramadoss@microchip.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This patch removes the struct ksz8 from ksz8.h which is no longer
needed. The platform bus specific details are now deferenced through
dev->priv.
Signed-off-by: NArun Ramadoss <arun.ramadoss@microchip.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This patch moves ksz8->shifts from ksz8795.c to ksz_common.c. The shifts
are dereferenced using dev->info->shifts.
Signed-off-by: NArun Ramadoss <arun.ramadoss@microchip.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This patch moves the ksz8->masks from ksz8795.c to ksz_common.c. The
mask will be dereferenced using dev->info->masks.
Signed-off-by: NArun Ramadoss <arun.ramadoss@microchip.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This patch moves the ksz8->regs from ksz8795.c to the ksz_common.c. And
the regs is dereferrenced using dev->info->regs.
Signed-off-by: NArun Ramadoss <arun.ramadoss@microchip.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

As of now, there are two spi probes, one ksz8795_spi.c and other
ksz9477_spi.c. This patch combines two files into single ksz_spi.c. The
difference between the two are regmap config and struct ksz8. The regmap
config is assigned based on the platform data. And struct ksz8 is left
untouched, as it is used only ksz8795.c. It can be used for all
other switches also in future.
Signed-off-by: NArun Ramadoss <arun.ramadoss@microchip.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This patch delete the ksz8_switch_register and ksz9477_switch_register
since both are calling the ksz_switch_register function. Instead the
ksz_switch_register is called from the probe function.
Signed-off-by: NArun Ramadoss <arun.ramadoss@microchip.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This patch move the ksz_dev_ops from individual files to ksz_common.c.
And the dev_ops is assigned to ksz_device based on the switch detect.
This reduces the redundant function and allows to reuse the
functionality for LAN937x which has similar register set.
Signed-off-by: NArun Ramadoss <arun.ramadoss@microchip.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This patch replaces the two different menuconfig for ksz9477 and ksz8795
to single ksz_common. so that it can be extended for the other switch
like lan937x. And removes the export_symbols for the extern functions in
the ksz_common.h.
Signed-off-by: NArun Ramadoss <arun.ramadoss@microchip.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

As per 'commit 3506b2f4 ("net: dsa: microchip: call
phy_remove_link_mode during probe")' phy_remove_link_mode is added in
the switch_register function after dsa_switch_register. In order to have
the common switch register function, moving this phylink validation to
phylink_get_caps validation hook.
Signed-off-by: NArun Ramadoss <arun.ramadoss@microchip.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

At present, ksz8795.c and ksz9477.c have separate dsa_switch_ops
structure initialization. This patch modifies the files such a way that
ksz switches has common dsa_switch_ops in the ksz_common.c file.
Signed-off-by: NArun Ramadoss <arun.ramadoss@microchip.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This patch move the setting the start bit from the individual switch
configuration to ksz_setup
Signed-off-by: NArun Ramadoss <arun.ramadoss@microchip.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This patch moves the enabling the multicast storm protection from
individual setup function to ksz_setup function.
Signed-off-by: NArun Ramadoss <arun.ramadoss@microchip.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This patch move the 10% broadcast protection from the individual setup
to ksz_setup. In the ksz9477, broadcast protection is updated in reset
function.
Signed-off-by: NArun Ramadoss <arun.ramadoss@microchip.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This patch move the common initialization of switches to ksz_setup and
perform the switch specific initialization using the ksz_dev_ops
function pointer.
Signed-off-by: NArun Ramadoss <arun.ramadoss@microchip.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

In order to transmit the STP BPDU packet to the CPU port, the STP
address 01-80-c2-00-00-00 has to be added to static alu table for
ksz8795 series switch. For the ksz9477 switch, there is reserved
multicast table which handles forwarding the particular set of
multicast address to cpu port. So enabling the multicast reserved table
and updated the cpu port index. The stp addr is enabled during the setup
phase using the enable_stp_addr pointer in struct ksz_dev_ops.
Signed-off-by: NArun Ramadoss <arun.ramadoss@microchip.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

To have the common set of initialization in ksz_setup, introduced the
new config_cpu_port member to ksz_dev_ops. Since both the ksz8795.c and
ksz9477.c configuring the cpu port in the setup function, introduced the
member.
Signed-off-by: NArun Ramadoss <arun.ramadoss@microchip.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This patch renames the shutdown to reset in ksz_dev_ops in order to use
the reset dev_ops in the ksz_setup.
Signed-off-by: NArun Ramadoss <arun.ramadoss@microchip.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This patch assigns the get_phy_flags & mtu  hook of ksz8795 and ksz9477
in dsa_switch_ops to ksz_common.  For get_phy_flags hooks,checks whether
the chip is ksz8863/kss8793 then it returns error for port1.
Signed-off-by: NArun Ramadoss <arun.ramadoss@microchip.com>
Signed-off-by: NPaolo Abeni <pabeni@redhat.com>

This patch makes the dsa_switch_hook for fdbs to use ksz_common.c file.
And from ksz_common, individual switches fdb functions are called using
the dev->dev_ops. And removed the r_dyn_mac_table, r_sta_mac_table and
w_sta_mac_table from ksz_dev_ops as it is used only in ksz8795.c
Signed-off-by: NArun Ramadoss <arun.ramadoss@microchip.com>
Signed-off-by: NPaolo Abeni <pabeni@redhat.com>

ksz_mdb_add/del in ksz_common.c is specific for the ksz8795.c file. The
ksz9477 has its separate ksz9477_port_mdb_add/del functions.  This patch
moves the ksz8795 specific mdb functionality from ksz_common to ksz8795.
And this dsa_switch_ops hooks for ksz8795/ksz9477 are invoked through
the ksz_port_mdb_add/del.
Signed-off-by: NArun Ramadoss <arun.ramadoss@microchip.com>
Reviewed-by: NVladimir Oltean <olteanv@gmail.com>
Signed-off-by: NPaolo Abeni <pabeni@redhat.com>

This patch assigns the phylink_get_caps in ksz8795 and ksz9477 to
ksz_phylink_get_caps. And update their mac_capabilities in the
respective ksz_dev_ops.
Signed-off-by: NArun Ramadoss <arun.ramadoss@microchip.com>
Reviewed-by: NVladimir Oltean <olteanv@gmail.com>
Signed-off-by: NPaolo Abeni <pabeni@redhat.com>

At present, P_STP_CTRL register value is passed as parameter to
ksz_port_stp_state from the individual dsa_switch_ops hooks. This patch
update the function to retrieve the register value through the
ksz_chip_data member.
And add the static to ksz_update_port_member since it is not called
outside the ksz_common.
Signed-off-by: NArun Ramadoss <arun.ramadoss@microchip.com>
Signed-off-by: NPaolo Abeni <pabeni@redhat.com>

This patch updates the common port mirror add/del dsa_switch_ops in
ksz_common.c. The individual switches implementation is executed based
on the ksz_dev_ops function pointers.
Signed-off-by: NArun Ramadoss <arun.ramadoss@microchip.com>
Reviewed-by: NVladimir Oltean <olteanv@gmail.com>
Reviewed-by: NFlorian Fainelli <f.fainelli@gmail.com>
Signed-off-by: NPaolo Abeni <pabeni@redhat.com>

This patch moves the vlan dsa_switch_ops such as vlan_add, vlan_del and
vlan_filtering from the individual files ksz8795.c, ksz9477.c to
ksz_common.c file.
Signed-off-by: NArun Ramadoss <arun.ramadoss@microchip.com>
Reviewed-by: NVladimir Oltean <olteanv@gmail.com>
Signed-off-by: NPaolo Abeni <pabeni@redhat.com>

ksz8795 and ksz9477 implementation on phy read/write hooks are
different. This patch modifies the ksz9477 implementation same as
ksz8795 by updating the ksz9477_dev_ops structure.
Signed-off-by: NArun Ramadoss <arun.ramadoss@microchip.com>
Signed-off-by: NPaolo Abeni <pabeni@redhat.com>

This patch move the dsa hook get_tag_protocol to ksz_common file. And
the tag_protocol is returned based on the dev->chip_id.
Signed-off-by: NArun Ramadoss <arun.ramadoss@microchip.com>
Signed-off-by: NPaolo Abeni <pabeni@redhat.com>

KSZ87xx and KSZ88xx have chip_id representation at reg location 0. And
KSZ9477 compatible switch and LAN937x switch have same chip_id detection
at location 0x01 and 0x02. To have the common switch detect
functionality for ksz switches, ksz_switch_detect function is
introduced.
Signed-off-by: NArun Ramadoss <arun.ramadoss@microchip.com>
Signed-off-by: NPaolo Abeni <pabeni@redhat.com>

The ksz9477_switch_detect performs the detecting the chip id from the
location 0x00 and also check gigabit compatibility check & number of
ports based on the register global_options0. To prepare the common ksz
switch detect function, routine other than chip id read is moved to
ksz9477_switch_init.
Signed-off-by: NArun Ramadoss <arun.ramadoss@microchip.com>
Reviewed-by: NVladimir Oltean <olteanv@gmail.com>
Signed-off-by: NPaolo Abeni <pabeni@redhat.com>

When kernel.h is used in the headers it adds a lot into dependency hell,
especially when there are circular dependencies are involved.

Replace kernel.h inclusion with the list of what is really being used.
Signed-off-by: NChristophe JAILLET <christophe.jaillet@wanadoo.fr>
Link: https://lore.kernel.org/r/41d99ef8629e1db03d4f2662f5556611e0b94652.1654323308.git.christophe.jaillet@wanadoo.frSigned-off-by: NJakub Kicinski <kuba@kernel.org>

The name, regs_size and overrides members in struct ksz_device are
unused. Hence remove it.
And host_mask is used in only place of ksz8795.c file, which can be
replaced by dev->info->cpu_ports
Signed-off-by: NArun Ramadoss <arun.ramadoss@microchip.com>
Reviewed-by: NFlorian Fainelli <f.fainelli@gmail.com>
Reviewed-by: NVladimir Oltean <olteanv@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This patch add the support for phylink_get_caps for ksz8795 and ksz9477
series switch. It updates the struct ksz_switch_chip with the details of
the internal phys and xmii interface. Then during the get_caps based on
the bits set in the structure, corresponding phy mode is set.
Signed-off-by: NArun Ramadoss <arun.ramadoss@microchip.com>
Reviewed-by: NVladimir Oltean <olteanv@gmail.com>
Reviewed-by: NFlorian Fainelli <f.fainelli@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

mib->cnt_ptr resetting is handled in multiple places as part of
port_init_cnt(). Hence moved mib->cnt_ptr code to ksz common layer
and removed from individual product files.
Signed-off-by: NPrasanna Vengateshan <prasanna.vengateshan@microchip.com>
Signed-off-by: NArun Ramadoss <arun.ramadoss@microchip.com>
Reviewed-by: NVladimir Oltean <olteanv@gmail.com>
Reviewed-by: NFlorian Fainelli <f.fainelli@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

ksz8795 and ksz9477 uses the same algorithm for copying the ethtool
strings. Hence moved to ksz_common to remove the redundant code.
Signed-off-by: NArun Ramadoss <arun.ramadoss@microchip.com>
Reviewed-by: NFlorian Fainelli <f.fainelli@gmail.com>
Reviewed-by: NVladimir Oltean <olteanv@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

ksz8795 and ksz9477 init function initializes the memory to dev->ports,
mib counters and assigns the ds real number of ports. Since both the
routines are same, moved the allocation of port memory to
ksz_switch_register after init.
Signed-off-by: NArun Ramadoss <arun.ramadoss@microchip.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>